N:\$bitmap ' data has been lost...» »

Similar Questions

• My data has been lost during the whole upward, there is nothing to sync how to start more fees.

  I started the process as a new user & just as data has started to copy my turn lost power for a few seconds. The data is immobilized as if made, but nothing has been recorded. The system went on as if everything was OK. When I tried to Sync to my new HP laptop, nothing came through. I tried again without success. Need help!

  No, just for the synchronization of the configuration again by creating a new account to sync once you have removed your current sync account to start.
  
  You should be able to reuse the same email as above.

• iPod touch will not got to some Web sites - "Safari cannot open the page because the network connection has been lost."

  Safari refuses to go to certain websites (facebook.com, youtube.com) on my iPod Touch and instead displays this error:

  S afari cannot open the page because the network connection has been lost.

  The bubble at the top where I typed in the URL doesn't change, it always says "facebook.com" or something else.

  No matter where I am, so it won't get fixed by resetting my home Wi - Fi router. Other sites load fine. I have reset the iPod, too, by pressing the sleep button and one on the front (whatever it's called) until I see the apple logo. I also did 'Story clear and data Web site' in the Safari settings.

  I searched the web and found a number of threads that start with similar complaints, but I can't find one where the problem has been resolved in fact.

  Thank you!

  Not "no matter where I am," means, it happens with all networks?

  If so:

  Try:

  -Reset the device iOS. Nothing will be lost

  Device iOS Reset: Hold down the On / Off button and the Home button at the same time for to

  ten seconds, until the Apple logo appears.

  -Reset all settings

  Go to settings > general > Reset and tap reset all settings.

  All your preferences and settings are reset. Information (such as your contacts and calendars) and media (such as songs and videos) are not affected.

  -Restore from backup. See:

  Restore your device from an iCloud or iTunes backup - Apple Support

  -Restore factory settings/new iOS device.

  If still problem, make an appointment at an Apple store Genius Bar because it appears that you have a hardware problem.

  Shop Apple Store - Genius Bar

• How to open encrypted, if the key has been lost in XP?

  I reinstall my Windows xp, but I can not open my encrypted data. My encrypt key has been lost

  There is no backdoor to EFS encryption.  This is why it is so important to backup your encryption certificates when using EFS.  Refer to the following article, paying special attention to the paragraph "why you should back up your certificates"

  "Best Practices for encrypting file system"
    <>http://support.Microsoft.com/kb/223316 >

  That said, if some important remains of your old system must still exist on your hard drive and have not been crushed in your new installation, there are a few programs that widening this information and try to rebuild your key.  Such a program is AEFSDR, but, frankly, it's a long shot at this point.

  HTH,
  JW

• Don't see the screen applications &amp; data after the update means that your data has been erased?

  I've just updated to iOS 10 and there is installed, but it shows a screen called Apps & data and gives options to restore the data, set it up as a new iPad or move data from Android. I was wondering if it meant that my data has been deleted completely?

  It's an iPad running iOS 10 4.

  Yes. This screen is available only after a deletion.

• App Store network connection has been lost because

  MacBook air early 2015 El Capitan 10.11.6

  Regardless of the service providers network, firewall is turned off, I get "we couldn't complete your purchase. Network connection has been lost"message when I try to install any app from App Store.

  Any help appreciated.

  Try resetting the App Store and the deletion of Cookies.

  Reset       Taken from old Toad

• How to make back to Firefox as it was a few weeks before a large number of features has been lost

  Firefox functioned very well at some point. After several upgrades he lost the feature so much that I need to go back to IE. However, I have added dozens of bookmarks, which are not in IE, so I need to switch back.

  I'm fed up with it now.

  A feature that has been lost:
  1, interactive for weather radar on websites as graphs (but not limited to) weather.com
  2. interactive graphics for graphs of trend of prices on the Google and Yahoo Finance websites
  3. cannot play videos on You Tube and other sites where they have embedded videos.
  4 were not able to right click to download videos on Real Player for a while.

  All of these features are always on IE.

  We will try to correct Real Player Downloader and Flash issues first. Read this article and see if it helps: 11.3 Flash does not load video in Firefox.

• data has been replaced before it can be read by the system

  Hello

  I use a flow sensor that creates a frequency output and which connected to my PCI-6035E. When I run it, it works for a few seconds and then gives an error. Error 200141 ' data has been replaced before it can be read by the system. " I also tested with a pulse rather than the flow sensor generator, and the error only when I changed the frequency. How can I solve this prolem?

  Thanks in advance!

  Thank you for your answers, Bob.

  I got it now works, the problem was that I was using continuous samples. I am now a single sample with a while loop and it works.

• Add or remove programs? Uninstall it says invalid or data has been corrupted, will not continue.

  Add or remove programs. The program I want to uninstall it is Printmaster 150.00 MB. I tried to uninstall it but uninstall it says invalid or data has been corrupted,

  will not continue. How to get out he computer?

  If you have the original installation media, a method that often works when an uninstall program is corrupt is to reinstall the app and then uninstall it.

  Otherwise, you could try free Revo Uninstaller or see http://ths.gardenweb.com/forums/load/comphelp/msg081415488395.html (unfortunately, the link to the manual uninstall instructions doesn't work; support for Broderbund software has been adopted by Encore.com, the search engine it leaves something to be desired; however, you can ask for help in a forum yet http://forums.encoreusa.com/).

  How to contact Technical Support (it is not clear if all Printmaster versions are still supported; I would try telephone assistance rather than on the web):
  http://forums.encoreusa.com/TM.asp?m=24071&mpage=1&key=%E5%B8%87

  The following (below the line *) comes from a post on the support forums forum moderator yet.  I have not linked to it because earlier in the post, it is suggested to use a registry cleaner in the manual uninstall.  Certainly, I do NOT recommend to use any registry cleaner.

  *************************************************************************************************************
  NOTE: this message does not apply to PrintMaster 2.0 or Print Shop 2.0.

  Broderbund programs, including (but not limited to) print shop, PrintMaster, designer of Scrapbook memories of creation and creator of calendar, are installed in the Program Files folder where most of the software are installed. However, many Broderbund programs will install also files and folders in other places on the hard drive.

  When one of these programs of Broderbund is uninstalled because it is suspected that the installation is corrupt, it's always a good idea to make sure to manually delete all the files and folders stored on the hard drive that are not deleted automatically during an uninstall normal - to ensure that all corruption is removed before the program, is reinstalled.

  Here are the paths of the additional folders where Broderbund software is commonly installed:

  Windows XP: C:\Documents and Settings\All Users Data\Broderbund logiciels\Print

  and

  C:\Documents and Settings\ [your user name] \Local Settings\Application Data\Broderbund logiciels\Print

  WinVista/Win 7: C:\Users\All Users\Broderbund logiciels\Print

  and

  C:\Users\[your-username]\AppData\Local\Broderbund logiciels\Print.

  and

  C:\ProgramData\Broderbund logiciels\Print

  **********

  PrintMaster address books can be accessed from and saved to the BOOKS folder that is a subfolder of the folder prints shown below (PrintMaster address books may be accessed from or saved to the Documents folder)

  Windows XP: C:\Documents and Settings\All Users Data\Broderbund logiciels\Print

  WinVista/Win 7:Print and C:\Users\All Users\Broderbund logiciels\Print logiciels\ C:\ProgramData\Broderbund

  (As you can see, when PrintMaster address books are registered under WinVista and Windows 7, they are saved in two files).

  For example, the address for PrintMaster 18 books would be saved in these folders on WinVista or Windows7 computer

  C:\ProgramData\Broderbund Software\Print\PrintMaster\18.0\Books

  C:\Users\All Users\Broderbund Software\Print\PrintMaster\18.0\Books

  To make sure that saved the address books are not deleted during the uninstall process, they must be saved prior to PrintMaster is uninstalled. When these address books are restored, it will be necessary to restore these in the same two folders address books - because an address book will not appear in the file. Open list, if not in the two files.

  Address books print shop can easily be stored in the Documents folder. So, if you have registered your address books in the Documents folder, it is not necessary to save the address book before you uninstall the print shop.

  **********

  Files that control the Project Gallery and the Art Gallery are stored in the folders of ART PROJECTS & which are subfolders of this folder to print

  Windows XP: C:\Documents and Settings\ [your username] \Local Data\Broderbund logiciels\Print

  WinVista/Win 7: C:\Users\[your-username]\AppData\Local\Broderbund logiciels\Print.

  For example, ART & for PrintMaster 18 PROJECT files would be in this folder on WinVista or Windows7 computer

  C:\Users\[your-username]\AppData\Local\Broderbund Software\Print\PrintMaster\18.0\PROJECTS

  Because these files can easily become corrupt if the video card driver is out of date or corrupted, the program folder that has been uninstalled (in this case, the folder 18.0) must be removed before the program is re-installed. It is completely safe to delete the folder PrintMaster - because a new facility this 18.0 folder will be performed when PrintMaster is uninstalled.

  If there is only one version of PrintMaster installed on the computer, the PrintMaster folder in this example could also be deleted safely.

  **********

  It is not absolutely necessary to remove the Adbook.exe file that controls the program PrintMaster addressbook. But it's always a good idea to know that this file is installed in this folder

  C:\Program Files\Fichiers Files\Broderbund\UMM

• I need to replace a series of OS disk not &#60; removed &#62; that the original has been lost, can I get a replcement?

  The disc has been lost? can I get a replacement.

  http://support.Microsoft.com/kb/326246/en-GB

• OfficeJet 6700 Premium: scan of the computer is that is no longer enabled network connection has been lost

  "scan of the computer is no longer active network connection has been lost" appears every 10 minutes or so on my "[redacted] Compaq 8200 Elite Minitour Convertible" is connected to "6700 Premium e-All-in-one Officejet - [redacted] H711n.

  I have already run the 'Locator solutions and update".  He finds nothing.

  I don't know what else to do.

  Please provide the following information if anyone can help including:

  The printer model - done

  Complete and detailed problem description-

  Operating system on the computer (including service pack revision) - done

  Connection method - Direct wireless, wireless, wired LAN, USB? -

  Brand and model of router and modem? -

  Error messages - on the screen of the printer or computer, no matter what flashing light patterns?

  If wireless, in the event of problem, what is the status of the blue wireless light on the printer, active, disabled or flashing? –

  Power off the printer and the router. Power on the router and wait 3 minutes, power on the printer. It connects to the router now? You have a valid IP address?

• Wallpaper base of Windows Vista has been lost

  My Red Cardinal bird Desktop background has been lost and I want to. I don't know what happened to this wallpaper.

  Hi CU Agent,.

  If this comes to pass, try a restore of the system to a point BEFORE the problem started.  Here is the procedure: http://www.vistax64.com/tutorials/76905-system-restore-how.html.  Don't forget to check the box to show more than 5 days of restore points.  If the first attempt fails, then try an earlier point or two.  NOTE: You will need to re-install any software and updates that you have installed and uninstall any software that you have removed between now and the point of restoration, but you can use Windows Update for updates.

  I hope this helps.

  Good luck!

• My main computer crashed and the data has been retrieved from the hard drive, including all of my Outlook Express dbx files

  I'll provide too much information because those of us who are computer knuckleheads think that everything is important since it is a mystery to us.

  My main computer crashed and the data has been retrieved from the hard drive, including all of my Outlook Express dbx files. There are four years of e-mails in these files and critical that I be able to open them.

  My only working computer running XP. It has Outlook Express is installed on it and was once used for e-mail, but not more and not implemented with my ISP to send or receive if it matters at all. Other that the sending and receiving of all the other functions of the OE program appear to be operational.

  I have read many explanations on how to open the files dbx on different sites - all is completely different and most seem well beyond my skill level.

  There is a fairly painless way to open these files? I don't want to try anything that could damage them. Please... any solution please guide me through in its simplest form - I am 64 but pretend you are explaining the process to a 7 year old. Yes, I'm that lame!

  Sorry for writing a novel and thank you to all who take their time to help the ignorant!

  I advise you to immediately copies of your DBX files restored. Save the duplicates in a place safe, and don't mess with them.
  Then try using one of the various tutorials that you have found on the Internet by using a copy of your DBX files restored.
  I did it a few times, but years ago and I DBX http://www.techrepublic.com/forums/questions/how-i-open-corrupted-dbx-files-in-oe/ visualization tool
  You just continue to make attempts, using a tutorial after another.
  As long as you have these unchanged copies of backup of your DBX files, you should survive it - other than frustration. Email PC remains a mess.

• "The relationship of trust between the Client and the domain controller has been lost."

  I had a client PC connected to a DC running 2003 SBServer.

  It was this error when he tried to connect with its domain account.

  "The relationship of trust between the Client and the domain controller has been lost."

  I had to connect as Administrator local and leave/re-join the domain with a different machine name.
  How can I fix the side Server?

  Hello

  The question you posted would be better suited to the TechNet community. Please visit the link below and validate the request.

  http://social.technet.Microsoft.com/forums/en-us/smallbusinessserver/threads

  Hope this information is useful.

• Text field validating this date has been entered - using Acrobat Pro

  I created a PDF form and need a text field which I formatted to a date field to validate if a date has been entered. For example if I have tab on this area and there are no registration, I want an alert to be produced by telling the user that the field is in need of a date is valid. Thank you

  Figured it out.

  onBlur for this area, I used:

  If {(lastValueInvalid)
  Event.Target.Value = "";
  lastValueInvalid = false;
  }

  If (event.value == "") {}
  App.Alert ("required field (cannot be empty): Please enter a valid Date of decision (example: 03/04/2015) ');
  }

  Then I added under the Javascript:

  lastValueInvalid = false;

  function FCDate_Keystroke (errorMessage, format)

  {

  var value = AFMergeChange (event);

  If (! value)

  return;

  If (event.willCommit)

  {

  var date = AFParseDateEx (event.value, format);

  If (! date)

  {

  FieldValidationPending = true;

  lastValueInvalid = true;

  If (! event.silenceErrors)

  App.Alert (ErrorMessage);

  } else {}

  FieldValidationPending = false;

  lastValueInvalid = false;

  }

  }

  on the other

  {

  If (!.) FC_DATE_KEYSTROKE_RE.test (value))

  {

  App.Beep (0);

  Event.RC = false;

  }

  }

  }