N: HP 4000 HP 4000 connection

Similar Questions

• HP LaserJet 4000 connected over an XP Pc to a network host and a machine of windows 7.

  I have an HP LaserJet 4000, which works well on my windows XP computer. I just bought a new windows 7, 64-bit PC and can not get the new PC for commiunicate with the HP printer. Is there a way to channel this default printer through the old Xp machine which will always be in the home network, but in another place?

  You should be able to get your LaserJet 4000 to work with your Windows 7 computer, but you may need to go to the HP site and download/install the LJ 4000 for Windows 7-64 bit driver.  The link to it should be as follows:

  <>http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?lang=en&cc=us&prodNameId=14952&TaskID=135&prodTypeId=18972&prodSeriesId=25474&lang=en&cc=us >

  HTH,
  JW

• GPIB instrument legacy Microlink 4000 using GPIB-USB-HS

  Hi all

  I face three recorders of older data, Microlink 4000, connected through GPIB and interfacing with my PC through GPIB-USB-HS.

  There is no drivers for data loggers...

  Their main in MAX addresses are displayed and I am able to send commands, but I'm not sure what to do now to begin to read the data recorded by each module.

  I think that I am just not access to the secondary address of each module or using the wrong commands. I've scoured the web for the manuals and orders 488,1 but they do not work in the interactive control of VISA.

  that is (Hex 0xBFFF0015) Read error occurs whenever I ask devices...

  Specification of the system:

  • power supply 3 x 4301
  • control units 3 x 4300
  • basic unit of time 1 x 4010
  • 34 x 4030 (12 Bit A - D converters)

  I apologize if I have not attached enough information still very new to LabVIEW and MAX.

  Please advise!

  Thank you very much

  JChan

  
  

• LaserJet 4000 printing error with USB/parallel interface and DATA light on at all TIMES

  Laptop Dell Vostro 3700, Windows 7/32, Laserjet 4000, connected via the USB interface cable / parallel on USB001. Interface drivers and printer installed automatically after starting the update of Windows PC.

  Single document print OK.

  Document of several pages: printer data LED flashes then REMAINS ON permanently. Printed front page sometimes, sometimes not.

  After some time, box status Control Panel/print poster printer fault and a yellow exclamation point appears on the printer icon.

  No possible mistake OK with MS print Fixit. No other printing possible before initialization of the PC and then to new as shown above.

  Same printer connected via a parallel cable that is normal for old PC Windows 2000 print OK.

  Help, please!

  SOLUTION FOUND!

  A SOLUTION THAT WORKS: add only DC powered USB hub and connect the printer to one of the ports of the hub-s. Let Windows install the drivers for the USB cable and printer and printing is perfect!

  It is that the laptop USB ports do not have enough current or voltage, especially if some other USB devices are connected to the laptop...

• Portege 4000 - Installed W2K - wireless connection problem

  I installed W2K the Portege 4000. XP was too heavy a resource for this system.

  After you install the network driver wireless Cisco (3.5.13.0) of your Web site, I am unable to get a wireless connection. In XP this comes automatically with an icon. The network device switch that I also installed did not help.

  I have the following:

  Connection to the local network - ethernet

  2 - wireless LAN connection

  Although LAKE 2 is activated this still does not pick up wireless.

  Any ideas?

  Hello

  PUH Windows 2000 is an older system. I didn t forget not all parameters of WLan connection and so I googled a bit.

  and I found an interesting page and a brief description how to configure Wlan connection in W2k.

  Check this box:
  http://www.Yorktech.com/wireless/windows2000/configureW2k.htm

  Welcome them

• Portege 4000: Unable to connect to the internet

  Hi need help

  has just been given a Portege 4000 of my father for my daughter's brother-in-law.
  The system worked before but hasn t used for about 6 months

  Now, he won t connect to the internet even when.
  I have to try is to say thanks to the Wi - Fi connection or connect directly to the wireless router.

  As I said he was working with a modem speed of tiscali key, I am with tiscali.
  I thought that there would be no problems, but there is

  Help, please

  Thank you

  Hello!

  You use DHCP or a static IP address?
  If you use DHCP, you must turn on your laptop or set a static IP address.

  You have yellow exclamation marks in Device Manager?
  Maybe the driver needs to be updated.

  If you are using a firewall, disable it. Perhaps, it blocks the internet connection.

  Good bye

• Connection Fireware IEEE for Nikon Coolscan 4000 ED?

  Coolscan 4000 ED bought and my computer has a compatible IEEE firewire.

  A new motherboard has been adjusted to my computer and the point of firewire rendered usable.

  Now, my computer must be replaced and have sought, without success, for a new computer with a Firewire IEEE point

  Is it possible to get a new computer with a Firewire connection or, Alternatively, to buy a Board and cable such as initially available when new?

  It could be that my scanner is now unusable but before I throw it I want to be absolutely sure.

  Some motherboards equipped with built-in FireWire (IEEE 1394) and others do not. Most inexpensive computers built recently are not.

  I wouldn't cela an important criterion in the choice of a new computer, however, because you can install a FireWare card in any computer with an expansion slot free.

  The requirement for an expansion slot pretty much means you will get a desktop or tower rather than a laptop (but can find find some laptops have built-in FireWire ports) or an 'all-in-one"where the computer is built into the screen.

  You need to determine - in the standard from any computer, you are interested in - is if it has a connector available extension and if so, if that slot is a PCI or PCIe (also known as PCI Express) slot.  Although seemingly simple, this information can be difficult to dig on a web site.  Dell in particular seems not to reveal this information on its web site.  You will need to call the computer manufacturer and ask.

  Once you have determined that you have a PCI or available PCIe slot, you can buy your Fireware card

  Examples (read the comments):

  Card PCIe FireWire with 2 external and one internal FireWire ports: http://www.newegg.com/Product/Product.aspx?Item=N82E16815166018

  Card PCI FireWire with 3 external and one internal FireWire ports: http://www.newegg.com/Product/Product.aspx?Item=N82E16815283029

  One thing to know when getting a FireWire card several ports, is that there are different sizes of FireWire ports, so you can't be found what you think, if you don't look at the pictures.  See http://tinyurl.com/c6og5t2 (4-wire connection has no power, so you can't charge a device connected to such a port).

• HP Z400, nvidia quadro 4000, main monitor connected on DisplayPort does not work

  Hello

  My first (primary) display is connected through an adapter displayport to DVI adapter (HP P/n: 481409-002 HP [email protected]).

  Now when I turn on the PC, the monitor gets no signal.

  I also wrote a message to HP support, but I don't have an answer.

  Support-ticket-no: #71940913 # and #72360491 #.

  Things, I try to solve the problem:

  • another adapter connected --> without success
    
  • connected to another cable DVI --> without success
    
  • Monitor connected to the other graphics card DisplayPort --> without success
    
  • different versions of pilot / installed (certified by HP for Workstation Z400, later Nvidia SolidWorks) --> without success
    
  • A monitor with display port without adapter plugged into the graphics card display port--> it works
    
  • Another monitor with DVI adapter and connected to the DisplayPort --> without success
  • Graphics card on the other slot (bottom) inserted PCIe --> without success
  • Monitor isolated more than a minute of the grid --> without success
  • In Windows 7 (Win and P - key key) the advanced value --> without success
  • Update BIOS to v3.57

  Now I do not continue and write a post here, with the hope of help.

  System:

  • HP Z400 workstation
  • nVidia Quadro 4000 (driverversion 311.66)
  • Windows 7 Pro 64-bit

  Now I need help from you.

  Maybe, we also had such a "phenomenon".

  Thank you!

  Greetings Marco

  Hello

  I wanted to just let know you that the problem has been resolved with the support.

  They sent a new adapter and it worked.
  This is the same adapter as described above.

  Could not believe it yet, but I'm glad that it finally works again

• I need help connecting Microsoft wireless Laser Desktop 4000

  I am trying to hang a Microsoft Wireless Laser Desktop 4000 for a system using Widows XP. The wireless mouse works but the keyboard is not I would like any information I can get ion this question... Thank you very much, MR. Grimm

  Hi norseman168,

  • What happens when you connect the keyboard to the computer?

  I suggest that you download and discover the Microsoft wireless Laser Desktop 4000 manually using the link below to check the use of it and its features.

  http://www.Microsoft.com/hardware/en-us/d/Wireless-Laser-Desktop-4000

• connect to hp laserjet 4000 PCL6 for PC under Windows 7 64-bit

  Having trouble connecting my old printer hp laserjet 4000 to my PC Windows 7 64 bit

  Tried to go to the hp Web site, download v5.2.6 driver "HP universal print driver for PCL6 Windows x 64" and installed on my box to the LPT1 port.  Cannot do print anything same - test page.  Whenever I try to solve problems in the screen printers and devices, it cannot solve even if the resolution of the problems-er claims it has solved the problem.

  No Windows 7 driver available on the HP site.

  See: http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=14956&prodTypeId=18972&prodSeriesId=25474&swLang=8&taskId=135&swEnvOID=181#1130

  Contact HP support:

  http://WWW8.HP.com/us/en/support-drivers.html

• 3 RVS 4000 with VPN connection

  Hello

  I want to connect in a triangle 3 RVS 4000 router with VPN

  I configured 3 routers, which can connect to the Internet. Each of them are configured as the gateway.

  I created 2 tunnels on each router. But the vpn connection cannot be established.

  Here is the configuration of ROUTER1 another are configured in the same way, only the remote group configuration is different

  What I also open some ports for VPN, if yes which and were

  Thanks fpr your help and your response

  HP. Meyer

  Hi hanspetermeyer,

  Thank you for posting. You don't need to open all the ports for VPN. I noticed that your screenshot shows two routers have a common LAN subnet of 192.168.100.x. You will need a different local subnet for each router:

  1. 1 router: 192.168.1.1
  2. Router 2: 192.168.2.1
  3. Router 3: 192.168.3.1

  I think that you will find the tunnels only connect once you change the LAN IP of the routers so that they are on different subnets. Please let us know if it works.

• Connect a to a USB MS receiver Logitech K520 wireless keyboard and a MS Wireless Mobile Mouse 4000

  Is it possible to connect a keyboard to a receiver USB MS Logitech K520 wireless and a MS Wireless Mobile Mouse 4000... all performed on a Toshiba Satellite L455 with Windows 7 Home Premium?

  The wireless mobile mouse works, because she and the USB receiver are two Microsoft, but we would like to get the wireless keyboard to connect too.

  The keyboard 'works' in that the green light... but only for six or seven seconds and then turns off. The keyboard passes no to the screen during this time, response.

  Thank you in advance.

  Roger Agness

  # They are both two different and opposite manufacturers.

  The K520 seems to use unique from Logitech Unifying receiver and Microsoft has their own receiver technology.

• Spectrum 13-4000 x 360 Convertib: why spectrum x 360 does not support the connection of facial recognition?

  This link lists the computers that support the connection of facial recognition Hello in Windows 10: http://www.windowscentral.com/here-are-all-pcs-support-windows-hello-facial-recognition-windows-10

  The spectrum of x 360 is not among them.  Is it because the camera in this laptop isn't a RealSense camera, or is it because the socket driver is missing for this machine?

  Any chance of accompanied by an upgrade of the driver of HP?

  Thank you

  Hi there @jwg,

  Thank you for visiting the Forums HP's Support and welcome! I read your message on the HP Support Forums and see that you are having problems with the connection of facial recognition on your laptop with Windows 10.

  I suggest you roll back to Windows 8.1 if you can for the moment because not all of the driver are available yet for Windows 10.

  I'm not aware of updates at the moment of the connection of facial recognition. However, the updated Windows 10 drivers will become available on your HP drivers and Downloads Page specific products as they are released and become available for HP.

  If you are unable to back up, here's a link to the HP Support Assistant if you need it. Simply download and run the application and it will help with the software and drivers on your system that need updated for Windows 10.

  You could also try Windows updates. They are coming with new resolutions for these issues every day.

  Have a great day!

• The driver install Portege 4000 with Windows 2000 Pro

  Hi all.

  I'm having a small problem with a reinstall of windows 2000 on my portege p4000. Everything seems to work fine except for the wireless. All drivers are in and there is nothing in Device Manager is listed as unmanned, the wireless client shows the connection to my router, but ipconfig shows that there is no link at all.

  If I installed drivers and utilities in the wrong order? I would use my recovery CD, but they are damaged.

  Is anyone know the correct order to install drivers or where I can get this information?

  Thank you very much

  Rob.

  Hello

  The order of the Portege 4000 W2000 facilities:

  -Windows 2000
  -Chipset utility
  -Display driver
  -Audio driver
  -Toshiba Software Modem
  -SMSC IrCC NDIS Miniport V5.1.2500.0 device driver
  -Logitech Mouseware
  -Toshiba Common modules
  -Toshiba Power Saver
  -Toshiba Utilities
  -Toshiba Mobile Extension
  -Toshiba Console
  -Toshiba controls
  -Toshiba Hotkey Utility for display devices
  -Toshiba SD Card Driver
  -Toshiba internal LAN Driver
  -Driver LAN wireless
  -Toshiba Client Manager
  -Switch Device network
  -Toshiba Wireless Hotkey
  -Bluetooth Stack for Windows by Toshiba
  -Windows Media Player 7

  I hope this helps.

  Good bye

• Satellite U940 - 4000 Graphics Intel does not work after upgrade from 8.1 to win

  I've updated my Satelite U940 11 X 8.1 Windows (from 8.0) and now my Intel Graphics 4000 does not work.
  The Device Manager shows Code 43: windows has stopped this device because it has reported problems.
  I try to download a new driver from Toshiba, but this is not possible. Whenever the download stops.

  Probably for a lot of traffic on the connection

  Were you finally able to download the driver?
  I could download the package without worrying about performance too