\\N-PC is not accessible. You might not have permission to use this network resource while trying to access the network computer

Similar Questions

• "[------\\[Computer name] [name of the file or folder] is not accessible." You might not have permission to use this network resource.

  I have a home network with four computers. I have some folders and files we want to share. I haveselected these folders and files in each computer and right click top of opening and then the sharing and Security tab and check share this folder on the network, and then clicking apply and OK. [However, when I try to access these files or folders from another computer on the network I get the name of \\[Computer]------[file or folder name] is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permisions. Not enough server storage is available to process this command. Increased the value of the IRPStackSize following another Microsoft kb but stil get the same message.

  How can I fix this problem so that we can share these files and folders between my wife, children and myself.

  OS Win XP Pro SP3 with all its current updates on all computers.

  Any help and asisitance will be greatly appreciated

  Sadnewbie

  Hello

  Perform the steps from the link below and see if it helps.

  Error message when you try to access a network Windows XP computer: "you might not have permission to use this network resource".

  Important:  This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/)

  Hope this information helps.

• "Cannot access working group on some computers running XP - ' < name of working group > is not accessible. You might not have permission to use this network resource ".

  I have a home with 4 PC network - one of them is running Windows 7 Home Premium (with homegroup disabled) and others running XP Pro.  The XP machines is called 'Server' and the server and the computer services browser running and set to automatic.  Two other computers, called "Notebook" and "Dell", as well as the machine Windows 7 have no file and sharing printers enabled and have specifically the Server service is disabled.

  My problem is that one of the two XP client machines cannot access the working group.  Let me be clear about this: I open Windows Explorer and click on "My network places"-> "entire network"-> "Microsoft Windows network", there is then a second 5-10 break and then my workgroup name is displayed.  When I click on the name of the Working Group, there is another ~ 10 second pause and then I get a message that says error " is not accessible.  You might not have permission to use this network resource.  Contact the administrator of this server to find out if you have permissions.  A device attached to the system does not work. ', where is the name of my group to work for other days, after some of the computers are restarted, I find that the XP client has absolutely no problem with that; but the other now has this same problem.  In other words, the problem going on between two XP clients.

  Let's analyze: I have Windows on all PC firewall and any other firewall program.  I tried to disable the Windows Firewall and my anti-virus (temporarily), program without effect.  This may not be a problem with the way I've set up my actions because the error occurs when I try to click on the task force rather than a shared resource.  This cannot be a problem with a specific XP client because at different times, each of the two PCs worked perfectly without any changes of configuration made between the two.  It could be a problem with the server settings; but I don't see what it could be.  I tried editing

  HKLM\System\CurrentControlSet\Services\LanmanServer\Parameters and changing

  IRPStackSize from 21 to 45, then 50.  I also tried to change the size of 2 to 3.  I restarted the server and the client XP and had no effect.

  I don't have the same account of user configured on all three machines.  However, this cannot be the issue because the problem occurs when I click on the task force, before the server name is still displayed.  In addition, each of these two XP clients have connected with their existing user accounts at times.

  I tried the Wizzard of configuration network running on all four machines, without effect.  I tried a lot of things, most of which I can't remember.  I'm at the end of my mind.  Help, please.

  JW,

  Thanks for the continued support.

  By the advice of IPCONFIG, I looked at the registry for all computers and found EnableProxy wasn't there.  According to the documentation by default to 0, which is what we want.  However, I added it to all the computers and left it set to 0 and restarted the computer.  The node Type still said 'unknown '.

  Thanks for the info on the master browser.

  The ""Network location cannot be reached"when you access actions."
  the article talks about Windows 2003 Server and none of the symptoms mentioned relate to this situation.

  The "network adapter advanced troubleshooting for Windows workstations" is on hardware troubleshooting.  I think that it's probably not a problem because the computer has no trouble to access the internet, which is not possible if the card network are not working.

  I went through the AutoCorrect entry to reset the TCP/IP stack, even if the article describes symptoms such as difficulty to access the internet...  And...  THIS MARKET!

  After re-booting, the PC that was in trouble can now access the working group.  All other PCs can always too (have not tried to restart all over again).  AWESOME!  I can't thank you enough!

  I re-post if the syptoms happen; but for now, we can consider this issue RESOLVED.

  Thank you 1 million,

  Adam

• \\mycomputername is not accessible. you might not have permission to use this network resource. comtact the administrator of this server to find out if you have access permissions.

  \\mycomputername is not accessible. you might not have permission to use this network resource. comtact the administrator of this server to find out if you have access permissions.

  Hello

  Thank you for giving us the opportunity to help you with the query.

  I understand the inconvenience caused, now that you have me with you I would take care of that.

  I suggest you refer to the steps suggested byJack MVP (replied on August 29, 2010)

  In the next thread that speaks of a possible solution to the related question.

  PC is not accessible. You might not have permission to use this network resource. Contact the editable from this server to find out if you have access permissions.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/PC-is-not-accessible-you-might-not-have-permission/26a1a479-8BA5-4213-9181-02364c884937

  It will be useful.

  Let us know the status, we are happy to help you further.

• Error: "\\(PC Name) is not accessible." You might not have permission to use this network resource... The specified network provider is not valid.

  Hi, this is a follow-up to the issue and my second attempt to find the solution. In addition, it is still connected to my first and second positions.

  My laptop that works with Windows 7 32-bit has 2 two natural questions:

  1. I can't access PC's on the network on the laptop itself and thus get an error:
  "\\(PC Name) is not accessible." You might not have permission to use this network resource. Contact the administrator of this server know if you have access permission. The specified network provider is not valid.

  2. When you make the file sharing Wizard, I get an error "your folder cannot be shared" and the only option is to click on 'Done '.

  I'm trying to share folders to another laptop that works with 64-bit Windows 8 but I think there must be a problem with the Windows 7 laptop. I can share and access all the folders of any laptop before.

  Thank you! Any useful response will be greatly appreciated.

  Hello Sevi,

  Thanks for posting your query in Microsoft Community.

  I understand that you have problems to access the specified network.

  But, I would like to know some information related to this topic to help you better.

  (1) is connected to a domain of the computer network?

  (2) is your computer connected to the homegroup?

  (3) have you been able to access the specified network previously.

  In the meantime, please follow the suggestions mentioned by Fazil M on May 15, 2012 and check if this is useful.

  Error "\\computername\f is not accessible.  You might not have permission to use this network resource"when accessing to Windows XP computer via a working group

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/error-computernamef-is-not-accessible-you-might/a8db7f8c-6a7b-462D-B7F5-48707ae6b1f8

  I hope this helps. Otherwise, feel free to write us again and we will be happy to help you.

  Thank you

• \\DAKOTASLAPTOP is not accessible. You might not have permission to use this network resource.

  Error message:
  \\DAKOTASLAPTOP is not accessible.  You might not have permission to use this network resource.  Contact the administrator of this server to find out if you have access permissions.
  Logon failure: the user has not granted the type of logon required on this computer.

  This is the error message that appears when I try to access the computer DAKOTASLAPTOP of SUPERNURD02.  I used to be able to access that's fine, but today it stopped suddenly working.  I can still access SUPERNURD02 of DAKOTASLAPTOP well.  I have been traveling through solutions, but can not find something that actually works.  Any ideas?

  Hi, DJ Owen,.

   

  1 are these computers connected to a domain network?

  2. How are computers (using home group/task force)?

   

  While you answer, you can refer to the Syed N suggestions from this link.

   

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-Networking/Logon-failure-the-user-has-not-been-granted-the/9cafeb92-ce7c-48D1-A286-f1202a5c8afb

   

  Hope that the information provided is useful. Do not respond if you need more help.

• Win7 computer cannot connect to other computers Win7 network "\\computername is not accessible. You might not have permission to use this network resource ".

  I have a Windows 7 (box A) system that cannot connect to files shared on another computer in Windows 7 (box B).

  • On the 'network card' and 'See the network computers and devices', I can see box B of area A.
  • I can ping Box B of area A.
  • I can connect on MEDIA sharing on box B of area A.
  • Area C (another system of Windows 7) I can connect to the B area and am presented with a box of authentication to connect to the shares (i.e., box B works as it should).

  But the box has double clicking on box B or using \\computername or \\IP_Address the dialog box run, I get the error:

  ----

  \\computername is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions.

  The network is not present or not started.

  ----

  I know that the system is available, because the area C can access... But something's not on the box... It cannot connect to zone B or C. Box

  I have disabled the firewall on both systems without result.

  I reinstalled the network adapter and Client for Microsoft Networks is installed on the box.

  Yet somehow box's not connection to other computers on the network.

  Any thoughts on what I should check would be appreciated.  Thanks in advance for the help.

  OK... so I was able to track down and get it fixed...

  I found another symptom (that would be a good way to check and see if you experience the same problem).

  In the network and sharing Center, I clicked on "Change advanced sharing settings" in the left column. I found that the radio button under "File and printer sharing" was put on the OFF position.  I started and saved the changes, but when I returned in these settings, it is once again in the off position.

  It turned out that the workstation service is set to disabled (which also caused the computer browser service for not being able to boot). I activated the workstation service, started, and set it to automatic.  Then did the same for the computer browser service.

  Both of these services running, the "File and printer sharing" it will remain actually on IT, and I am able to connect to other devices on the network in the way I had to.

  I can't mark this message as the solution (perhaps because I posted it?) so if someone he will quote as their response to the post office, I'll be able to mark as answer.

• Cannot access other homegroup files, error "you might not have permission to use this network resource".

  Help

  I have two laptops 7 Home premium to windows. I created a home group. A computer can see and access each other, the other cannot see, but cannot access the other. When I click the icon from the other laptop, I get the error \\pc is not accessible. You might not have permission to use this network resource...

  I checked the password, name of House Group, sharing and discovery of parameters already and everything seems to work. The only antivirus on both computers is microsoft security essentials.

  What should I do?

  Hello

  Please contact Microsoft Community. I understand that you have a problem with access to shared files from other computers on homegroup. I appreciate your efforts to solve this problem, I'll probably help you solve this problem.

  This problem might have occurred because of these reasons:

  1. Permission problem.
  2. Incorrect settings.

  Try the steps listed here and see if it helps:

  Method 1:
  I suggest you to run the troubleshooters of shared folders to automatically find and fix some common problems.

  a. open the shared folders convenience store by clicking on the picture of the Start button Start button and then click on Panel.

  (b) in the search box, type Troubleshootingand then click Troubleshooting.

  c. under network and Internet, click on access shared files and folders on other computers.

  Method 2:
  If the problem persists, I suggest that return you the item and make sure file sharing permissions are set correctly.

  File sharing essentials
  http://Windows.Microsoft.com/en-us/Windows/file-sharing-essentials#1TC=Windows-7

  Note: try the steps that you have not tried before.

  See the article for more information.

  Why can't I access my homegroup?
  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-access-my-HomeGroup

  Hope this information helps. Reply to the post with an up-to-date report of the issue so that we can help you further.

• You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions. The network path was not found. »

  What does this message mean? I get when I click on the icon to evaluate files on another of our computers. "You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions. The network path was not found. »

  The other computer has not been configured to allow remote access to this folder from your account.  You'll want to go to this other computer, right click on the folder that is shared and go to properties, then set the appropriate security settings to allow access.

• COMPUTER is not available. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions.

  Original title: cannot add homegroup printer

  Cannot add printer homegroup.  I tried everything I can think of without success.  I have laptop which is part of my home group who can't create a link to a printer attached to another computer.  The search for the printer does nothing.  When I try to add manually, when I click on the computer that hosts the printer, I get the following:

  "[Computer SCIENCE] is not available.  You might not have permission to use this network resource.  Contact the administrator of this server to find out if you have access permissions.  The specified network provider name is invalid.

  The problem seems to exist in the computer on which I am trying to add the printer, not the host, as I was able to add another computer to the host without problem.

  Help would be appreciated.

  Thank you.

  Hi Ryan,

  Thanks for the quick response.

  I suggest to change firewall security settings, or disable the security software on the system and try to access the location.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  For more information, you can visit the link below where the client came the similar problem.

  http://social.technet.Microsoft.com/forums/en-us/itprovistanetworking/thread/955717b7-9ea3-424C-9b3a-719520f1b043

  Hope this information is useful.

• You might not have permission to use this network resource. Contact your administrator of this server to find out if you have access permissions. (Vista)

  I get this message from a computer on which I'm putting the print share and I put on for the sharing file and printer sharing on both computers, but he repeats to me by saying that even please help message.

  Hello

  ·         Logged in as an administrator on the computer?

  ·         Your computer is on a domain or a workgroup?

  ·         You will remember to do recent changes on the computer before this problem?

  Response with above information to better help you.

  If your computer is on a domain network, you can contact the system administrator for assistance.

• The caller of the API do not have permission to perform this operation

  I generated an OAuth token and I get the following result every time that I have the query API (either directly or to try it out the tests here: https://secure.na1.echosign.com/public/docs/restapi/v5)

  {
  "message": "the caller of the API need not have permission to perform this operation."
  'code': "PERMISSION_DENIED".
  }

  
  

  I checked "on" for each single scope and set the modifier to the account (I also tried to change the group, but that made no difference). The key to OAuth has been authorized by the account used to register for this account of eSign. It is also a developer account, and it's under a user different from what I write under.

  
  

  Basically, all I want to do is get the status on all documents and see whether they are signed or not. I don't like that the user has permissions for that.

  
  

  Thank you!
  

  Hello Ollie,

  The error is specific to an API call or is happening with several API calls that you are trying to do with OAuth token? Can you inbox me your email address with which you have created the application API with OAuth?

  Kind regards

  -Usman

• you don't have permission to open this file, contact the file owner or administrator to get permission

  My windows\system32 folder, I cannot access some files in this folder.  I recently installed a monitoring program on my laptop and it is necessary for me to admit that some of the files in the system folder of 32 in April for the antivirus program.  Whenever I try to add one of these files, I get this error "you don't have permission to open this contact the file owner or administrator to get permission."  I am the administrator or owner and there is no other user account on my laptop.  Please notify.

  Hi ewingt26,

  I suggest you to take ownership of the files and check if it helps:

  Troubleshoot "access denied" when opening files or folders

  I hope this helps.

• error message "you don't have permission to open this file. Contact the file owner or administrator to get permission. " I am the administrator and the owner of the file.

  My XP computer crashed and now I have Windows 7 on a new PC.  I downloaded my files from an online backup and now when I try and open a Word document, for example, I get the error message "you don't have permission to open this file.  Contact the file owner or administrator to get permission. "  I am the administrator and the owner of the file. Help!  I am locked out of all my files!

  1. Right click on the folder that you want to take control and then click Properties.

  2. Click the Security tab, click Advanced, and then click the owner tab.

  3. Click on change. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  4. Click on the name of the person you want to give to the property.

  5. If you want that person to be the owner of the files and subfolders in this folder, select the Replace owner of subcontainers and objects to check.

  6. Click OK.

• You don't have permission to open this file - but... I am Admin and permanent air well

  Hello
  I have a folder on my desktop, and inside this folder, I have two additional folders and two files JPG (cover). In the main folder, I got 3gbish with a value of MP3s and small amounts of MP3s inside two subfolders. I was able to remove all the files in the main folder of fine, but cannot remove the two subfolders, two album art jpgs and the folder main itself. I can't delete, rename or change permissions.

  If I look at the permissions for one of these objects, I complete privs read/write etc. I'm the only computer account and I am administrator. I have no problem with my computer other than these files. I want that they went!

  This sounds like a registry problem? I tried to use utilities like LockHunter to help, but I get the same message "you do not have permission" as when I try manually. Don't know what else to do.

  Initially, lockhunter specifies the objects were locked by a process. It is windows media player. This folder was monitored by Windows media player for songs. I removed from the windows media Player library settings, however, I am still unable to remove the file manually or via lockhunter. LockHunter now no locking process but when I try to delete, it says "you are not allowed. Please contact the administrator '.

  It is a calculation home running Windows 7 x 64.
  Drive is local and not network.
  No changes were made to the system I know.

  Any suggestion would be appreciated.

  Kind regards
  Sean

  With what program you try to open the .dmp?

  If WinDbg, right-click on the executable and select run as administrator.