N300 not see the Lan cables

Similar Questions

• HP250G4 (M9S81EA): the laptop computer does not see the usb cable

  Hello, have a problem with HP250G4 (M9S81EA), doesn't want to install cable diagnostics. After you install the cable drivers, win10-64 cannot define it. All the drivers are installed on your laptop and work properly. The cable is the same worker checked on another laptop. None of the Google tips help not hurt for 3 days with this problem. I hope for your help.

  USB device not recognized
  Works Yusb last device connected to your computer, and windows cannot identify him.

  The request failed usb device descriptor

  I installed on this laptop Win 7.8.10 and the unit still does not work, I think it's a hardware problem of the laptop. But at the same time, other usb devices are working properly on...

  < feature name = 'Application' type = 'Description' sequence-id = "3" >
  < attribute name = "a0" value = "HPAdvSysDiag_USBPort" / >
  < attribute name = "a1" value="5.9.0.0"/ >
  < attribute name = "a2" value = "2" / >
  < attribute name = "p1" value = "09/11/2015" / >
  < attribute name = "p2" value = "F.1A" / >
  < attribute name = 'p3' value = "96.39" / >
  < attribute name = "p5" value = "" / >
  < attribute name = "p15" value = "2" / >
  < attribute name = "p16" value = "0" / >
  < attribute name = "p17" value = "0" / >
  < attribute name = "p20" value = "00000001" / >
  < attribute name = "p4" value = "1" / >
  < attribute name = "p0" value = "2015-12-26 22:45:56" / >
  < attribute name = "p10" value = "0" / >
  < attribute name = "d15" value = "F3" / >
  < attribute name = "a4" value="00.00.00.34"/ >
  < attribute name = "d0" value = "3" / >
  < attribute name = "z0" value = "94L7PW-7R07T8-XD7WMF - 8 d" 7403 "/ >
  < attribute name = "e0" value = "434" / >

  Help someone or not?

• After I start my computer dell laptop I connect the LAN cable to run internet ON my laptop but it doesn't detect LAN cable

  Hello..

  After I start my computer dell laptop I connect the LAN cable to run internet on my laptop but it does not detect the LAN cable, using the ultimate32 bites. (But if I connect LAN canble then start computer it works fine)

  Hello

  1 windows operating system is installed on the computer?

  2. do you think that no matter what error message in Device Manager? If Yes, what is the full and exact error message?

  3. What is the number of brand and model of the computer?

  Method 1:

  If you are using Windows 7, I suggest to see the link and try to run the troubleshooter and check if it works.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  The link applies to the Windows Vista and Windows 7 operating system.

  Method 2:

  Check the link and try using the network troubleshooter to fix the problem.

  Using the troubleshooter from network in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  See also:

  Use Network Troubleshooter event logs to solve network problems

  http://Windows.Microsoft.com/en-us/Windows7/use-Network-Troubleshooter-event-logs-to-solve-network-problems

  Method 3:

  See the link and check if it helps.

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

  Let us know if it helps.

• No lights when the LAN cable is connected by Satellite A30-141

  I'm trying to connect my satellite A30 141 to a router using an rj45 plug. When I connect to the ethernet port, nothing happens. no lights on my laptop. someone at - it how to deal with this issue. I can reset the port of a Charter service engineers.

  any help would be much appreciated

  Hello

  I put t know which lamps do you mean because I don t find any LAN LEDs on this laptop. In case you I would recommend checking the status of LAN card in Device Manager. Check if this card has been properly recognized and if there is no yellow exclamation point.

  In addition, I put t know what you expect. If you connect the LAN cable to the laptop from the LAN icon in the taskbar should usually shows the connected state of LAN cable (NO red x). If you do not see this icon please activate this option in the properties of LAN.

• Toshiba NB550-111 - no connection if the LAN cable is more than 2 metres

  Hello

  My newly purchased Toshiba NB550-111(Windows 7 Starter Service Pack 1) has problems with the LAN card.
  If the LAN cable is more than 2 meters, no relation to Allied Telesyn switch (no indicator led on the switch, 2 other desktop computers already connected). I tried not to connect in a different port (one used previously by one of desktop computers), no connection. I tried with 3 cables, still no results.

  Cables (cat5E, so important) have been tested OK before with a cable Tester, and I use both of them without any problem with another 2 desktop computers at home. I set another cable (5 m long, newly purchased) and tested for connectivity. It works very well with the other two offices, no results with the netbook. I tried with adapter it works, I disabled ' energy efficient ethernet "NIC, still no connection properties page. It only connects if the cable is less than 2 meters. I tried to connect the netbook directly to the DSL router, still no connection with a longer cable.

  The device is reported by windows as work very well, and the test Toshiba utility ends there is no problem. Windows I configured in the Control Panel, the Plan balanced for maximum performance in the power options, still no results.
  Any ideas, please?

  Now maybe stupid question but what is with WLAN? You don t want to use WLAN?

• I have a pavilion p6130fpc and it will not see the drives.

  I have a pavilion p6130fpc that will not see the drives. I tried 3 different hard drives and change the cable and port twice. I have also reset the BIOS and pressed the power button for five seconds after you disconnect without success. Someone at - it any other ideas?

  Willman,

  Unfortunately you are not alone. HP has sold a lot of different models with the M2N78 - motherboard. The problem is that the manufacturer of the Board of Directors (not HP) set up a controller chip NVidia which tended to overheat. Once this chip goes, ur stuck. The SATA ports are controlled by this chip.

  http://h30434.www3.HP.com/T5/desktop-hardware/m8530f-desktop-PC-with-a-M2N78-la-mother-board-doesn-t-see-my/TD-p/181716

• HP laptop: unable to identify the lan cable connection

  Microsoft Windows [Version 6.3.9600]
  (c) Microsoft Corporation, 2013. All rights reserved.

  Rodriguez C:\Users\anshu > ipconfig/all

  Windows IP configuration

  Name of the host...: fadiga
  Primary Dns suffix...:
  Node... type: mixed
  Active... IP routing: No.
  Active... proxy WINS: No.
  ... DNS suffix search list: Working Group

  Ethernet connection to the Bluetooth 2 network card:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Device Bluetooth (personal area network)
  #2
  Physical address.... : B0-10-41-80-AF-1E
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes

  Local Area Connection wireless LAN adapter * 5:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Microsoft Hosted network virtual card
  Physical address.... : B0-10-41-80-AF-1E
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Local Area Connection wireless LAN adapter * 2:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Microsoft Wi - Fi Direct virtual card
  Physical address.... : B0-10-41-80-AF-1F
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes

  Wi - Fi wireless LAN adapter:

  The connection-specific DNS suffix. : Working Group
  ... Description: RT3290 Ralink 802.11bgn wireless adapter
  Physical address.... : B0-10-41-80-AF-1D
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes
  Address IPv6 local link...: fe80::e809:c01a:618f:7b5a %4 (Preferred)
  IPv4 address...: 192.16.137.4 (Preferred)
  ... Subnet mask: 255.255.255.0.
  Lease obtained...: Saturday, June 11, 2016 08:56:13
  End of the lease...: Wednesday, June 15, 2016 12:56:15
  ... Default gateway. : 192.16.137.1.
  DHCP server...: 192.16.137.1.
  DHCPv6 IOOKING...: 78647361
  DHCPv6 DUID customer...: 00-01-00-01-1C-FA-E4-80-14-58-D0-C5-74-1D

  DNS servers...: 10.10.2.2.
  192.16.137.1
  NetBIOS over TCP/IP...: enabled

  Ethernet Ethernet adapter:

  The connection-specific DNS suffix. :
  Description...: Realtek PCIe FE Family Controller
  Physical address.... : 14-58-D0-C5-74-1D
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes
  Address IPv6 local link...: fe80::3070:15bf:b1ee:daab %3 (Preferred)
  Autoconfiguration IPv4 address. . : 169.254.218.171 (Preferred)
  ... Subnet mask: 255.255.0.0.
  ... Default gateway. :
  DHCPv6 IOOKING...: 51665104
  DHCPv6 DUID customer...: 00-01-00-01-1C-FA-E4-80-14-58-D0-C5-74-1D

  DNS servers: fec0:0:0:ffff:1 1%
  FEC0:0:0:FFFF:2 1%
  FEC0:0:0:FFFF:3 1%
  NetBIOS over TCP/IP...: enabled

  Card tunnel Teredo Tunneling Pseudo-Interface:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Teredo Tunneling Pseudo-Interface
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Card adapt 6TO4 tunnel:

  The connection-specific DNS suffix. : Working Group
  ... Description: Microsoft 6to4 card
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes
  IPv6 address: 2002:c010:8904:c010:8904 (Preferred)
  ... Default gateway. :
  DHCPv6 IOOKING...: 704643072
  DHCPv6 DUID customer...: 00-01-00-01-1C-FA-E4-80-14-58-D0-C5-74-1D

  DNS servers...: 10.10.2.2.
  192.16.137.1
  NetBIOS over TCP/IP...: disabled

  Tunnel adapter ISATAP.workgroup:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. : Working Group
  ... Description: Adapter Microsoft ISATAP #5
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Tunnel adapter isatap. {74914F29-E819-4DEB-8CC2-D37CBFD70F3B}:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Adapter Microsoft ISATAP #6
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Rodriguez C:\Users\anshu >

  On the lan cable connection, it says as unidentified network.

  That's what I have to type the command ipconfig/all.  I tried to reinstall drivers recvoery as Manager, but no results. It worked without problem until now

  @anshu645

  Home networks typically use a form any of 192.168.x.x

  For example:

  192.168.1.14

  Found in your example:

  192.16. 137.1

  Also found:

  Autoconfiguration IPv4 address. . : 169.254.218.171

  +++++++++++++++++++++++++++++++++++++++++++++

  I suspect that the installer with your home network router is misconfigured and the network can't find a viable (useful) DNS address to use for the purpose of ISP Internet Service (ISP) connection.

  Please see the following:

  HP PC - troubleshooting wired home networks (Windows 8)

  HP PC - Troubleshooting wireless network and Internet (Windows 8)

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  My answer-click accept as Solution to help others find answers.

• Install HP does not see the printer in network, Windows DOES. Help!

  Hello

  I am trying to add my HP Officejet k8600dn to Windows 7 (32 bit) so I can scan, but the HP Installer (add device) can not see the printer. The unit is set up by cable to a switch on my network via an ethernet cable. If I go into the menu "Add a printer" Windows, I can install the printer very well. But I have to be able to scan and I don't know what to do.

  Tips on getting functional analysis if the HP software is unable to see my printer? Subnet mask and gateway on the printer are the same for the computer and the printer. I typed the correct IP address in the "Add a device" menu of HP, but he sees not just it. ARRGG!

  Thanks for any help!

  Hello

  I think that there is some confusion because the Officejet k8600dn is only a printer, it is not a multifunction device and does not provide the capability of scanning.

  You can find the specifications below:

  http://support.HP.com/us-en/document/c01287217

  If you have any different model printer, please specify the exact model.

  Kind regards

  Shlomi

• The blue windows screen Driver_irql_not_less_or_equal 7 when connecting the LAN cable?

  Hi all,
  I just want to ask how to solve Driver_irql_not_less_or_equal windows 7 blue screen when connecting the LAN cable?
  pls help me...
  Thanks in advance...

  We need the DMP file because it contains the single record of the sequence of events that led to the accident, what drivers have been loaded, and what has been loaded.

  You may be able to get the DMP files without crashing by booting in SafeMode (F8) with networking.

  If you are overclocking stop.  (chances are that if you are unsure if you are, you are not)

  To allow us to help you with symptoms BSOD on your computer, download the contents of your folder "\Windows\Minidump".

  The procedure:

  * Copy the contents of \Windows\Minidump to another location (temporary) somewhere on your machine.
  * Zip up the copy.
  * Join ZIP archive to your message by using the button (attachments) "trombone".
  * Please download to a service like Skydrive or "Rapidshare" to share files and put a link to them in your answer.

  To ensure the minidumps are enabled:

  * Click Start, in the search box, type: sysdm.cpl, press ENTER.
  * On the Advanced tab, click Startup and recovery... Settings button.
  * Make sure that automatically restart is unchecked.
  * Under the writing debugging information header, select image partial memory (256 KB) in the list box drop-down (varies from 256kb).
  * Ensure to that small Dump Directory is listed as % systemroot%\Minidump.
  * OK your way out.
  * Reboot if changes have been made.

  Please also run MSinfo32 and download the output as well.

  To run MSinfo32 please go to start > run > MSinfo32
  Go to 'file', 'save' and download the PDF is saved with the DMP
  (Instructions for XP, Vista, Win 7, Win 8)

• BIOS does not see the hard drive

  For my Presario 6620DK, I bought a Western Digital 160 GB PATA HARD drive, which I want to install instead of the original Samsung SV0602H 60 GB ATA-100.

  Unfortunately, bios does not see the new HD. If I'm on the old hard drive, it is recognized by the bios.

  I have the jumper in the right position for Cable Select.

  What do I have to get new HD work?

  Hi, Arne:

  There is the outside possiblilty of the drive is bad.

  You have another PC, you can test it in?

  You have a 120 GB of HARD drive, you can test in the PC?

  If she sees the 120 GB HARD drive and not 160 GB HARD drive, then you have your answer.

  Paul

• In the new window of the tab, I get a full screen of a site, and I do not see the gear of NEW CONTROLS TAB

  In a new tab (+) window, I get a full screen of the Bing site, and I do not see the gear of NEW CONTROLS TAB.
  I tried dragging one bookmark in this window and then had this site full-screen. But when I exit Firefox and restart it, it is by default to the Site of Bing - I HATE BING
  I do not see the gear for new tab controls, and so I can't put it: 'display your top sites '.
  I uninstalled Firefox and installed the latest version - I found myself with the same thing, I had - including my homepage and exactly the same problem - your help would be appreciated

  What do you see on the page, just nothing?

  Could you come back: config, filter using newtab again once and if browser.newtab.url is bold claims to be 'set of users", right click and click Reset in the menu bit

  If you open a new tab, which solve this problem?

  Edit: sorry for typo's fault: browser.newtab.url

• Version 38.0.1 does not see the passwords stored in previous versions

  Version 38.0.1 does not see the previously saved passwords, and urged it to re - enter and save the password. After revert you to the version saved 31.7.0 pass back too. We have more than hundreds of copies of the program and all cached passwords, users do not even know what their password. This failure is a serious problem.

  Problem solved. Probably the file has been corrupted signons3.txt. I deleted the file, and the new passwords are kept. After this version of the software update and new version I've seen passwords, create a logins.json file and now everything is fine. On all other computers in the company such a problem does not arise.

• Can not see the Forum Signature

  The whole issue is that I do not see the image I created for one of my signatures. I find this strange but because it's only MY signature in this particular forum (the official Sims 3 ones) that I can't see. I see everyone, and I don't have this problem on another forum or website. However, I can see the signature when I look at the forum using my phone or another browser on my computer. There is this: the signature will appear suddenly after that I have post a photo in a real post, but as soon as I refresh the page or go to another, a large white space will be where my image is supposed to be. I asked others, and they all say that they can see it properly. I tried to reset Firefox, but it changed nothing.

  There have been problems reported in Firefox with images stored on Photobucket.
  
  Would be easier to host images with another image, hosting company.

  This issue seems to be caused by the default value of text/html Firefox sending accept header instead of an image request and this causes Photobucket redirect to a HTML page with the image and not the image that is requested.

  • [981195/questions/981195]

• Can not see the modules in the menu

  On my Samsung Galaxy 2 using JB 4.1.2 Note When I press the button menu in the lower left corner, the menu that is displayed will not display anything beyond 'Settings', that is, I do not see the addons, in particular the add-on button "Clean & Quit", which is the one I most need. Restart the phone often solves the problem, but only temporarily. Any ideas?

  This is probably the 832990 bug. The problem was solved for me after I disabled the checkbox 'do not keep activities' in the developer settings!

• in Firefox can not see the window of downloads, specialist of the jump in the trunk to be saw - the speed downloaded a lot and now can not see how to fix it?

  in Firefox can not see the downloads window, specialist of the jump in the trunk to see - the download speed
  Downloaded a lot and now can not see how to fix it?

  The download Panel has been moved to the upper right corner with a circle arrow down. You can also visit on: downloads of your browser to visit all your downloads.