N5520 very low Audio with Skype

Similar Questions

• Very low audio on my Satellite L755-M1KS new

  Hello

  First of all, I could not find my model here on this Web site or on any of the Web from Toshiba sites also which is very weird.
  My problem is, the sound is very low since the first day when I bought it.
  The laptop is still under warranty and I don't know if it's a software issue or a hardware one.
  I am located in Abu Dhabi, I don't know where is the center of support toshiba here and I don't know why this particular model can not be found anywhere!

  Help, please!
  Thank you
  Toshiba Satellite L755 - M1KS

  Unfortunately I can't find your laptop Toshiba on page too.
  Anyway, if you use original recovery image Toshiba (original preinstalled OS) and you are not happy with her closest contact with the service provider authorized Toshiba and ask for help.

  You can find the ASP on http://gulf.computers.toshiba-europe.com/innovation/en/generic/ASP_SUPPORT/
  Check it out.

• My laptop volume is very low, even with the maximum setting. It also has a very annoying echo

  I tried every setting available on this laptop, go all together if not try several changes in all settings. The volume is still low and has a very annoying reverberation and echo effect, even with these settings turned off. I got it for a week, and I was very happy with any other accept the audio. The reasons for buying this model were media processing and so far I have and become more disgusted daily with her. It is a Pavilion dv6 and it has beat audio software. If anyone has a solution, it would be much appreciated.

  Hello

  One thing that can help is the following.  Do a right-click the speaker icon in the taskbar and select "playback devices".  Left click the device once to highlight default (it is usually 'speakers and headphones') and then click the properties button.  Click the enhancements tab and put a check mark in the box "Loudness equalization.  Click on apply to save the changes and then click OK in all other windows and see if allowed at all.

  Kind regards

  DP - K

• Tecra M11 - very low audio volume

  I have a Tecra M11 for a few months and I am overall very happy with my new laptop.

  A question I have is the speaker volume level. When I play the video or the sound of music is about audible, even with the speakers lining and the relevant channels appeared in the volume mixer in Windows 7.

  When I open volume mixer I see that the speaker volume is at max, where is the application that plays music. I can't bar which moves vertically to show the level of the sound playback, a green one, and it does not go beyond 25% of the full bar.

  Everyone experienced, or got any advice on how I can get my speakers a little harder?

  Al

  Have you tried reinstalling the Audio driver?

  External speakers work ok?

  Have you installed the latest version of the BIOS?

  If you play a Midi file, is also very sweet?

• L430 - very low Audio output

  We bought several L430 notebooks and with Windows 7 audio output is very weak... we tried with the realtek drivers and windows HD, but the result is poor put off...

  
  

• BlackBerry Z10 Volume is suddenly very low

  Hi, hoping someone can help. Since the 10.1 update last night, via the headphone volume is very low even with the boost of helmet on. This not only for music applications, but also files on my phone, so I don't see what is a file/app issue.

  Does anyone else know this and have a way to fix it? I restarted, stop and played with all the settings of volume... no change... I can't even put my helmet and stifling a conversation at the counter next to me...

  The speaker works perfect? or is it just low volume headphones?

  You have already try this...

  Try changing the Audio call, go to the phone application > slide down from the top > select settings > Audio call > try using the Boost of boredom or Bass Boost and test the volume of calls.

• Webcam with integrated microphone. Very low sound MIC, but also an ai Genius separated from the webcam microphone. How do we install the additional microphone?

  Webcam with integrated microphone.

  Webcam with integrated microphone. Very low sound MIC, but also an ai Genius separated from the webcam microphone. How do we install the additional microphone? more details on settings please

  to check your setting first:

  Right click the speaker icon in the notification area and choose: Adjust Audio properties.

  Or: Control Panel, sounds and Audio devices.

  Volume tab: click Advanced under Speaker settings and open the drop-down list for the speaker setup and choose your speakers, click on apply.

  Click the performance tab and move the sliders to the complete and best, click OK.

  According to the Volume of the device, click Advanced.

  On the page of the Volume control, click Options in the menu, click Properties.

  Mixing should be your system and not one of your pickups.

  With reading selected all the check boxes.

  Click record, peripheral mixing system, check all the boxes.

  Click play again, and then click OK.

  Volume control, "as you like it".

  Vague, put the max slider.

  All others are ok in the middle.

  Close the Volume control.

  Now we will install your micro Genius:

  Click on the Audio tab:

  Audio playback: System.

  Sound recording: click the menu drop down and choose your Genius mic, click on apply.

  Click the voice tab:

  Reading of the voice commands: System.

  Voice recording: click the menu drop down and choose your Genius mic, click on apply, click OK

  When you want to use your Web Cam microphone, you will need to go back and select again instead of your micro Genius.

• The microphone volume is very low on a Dell inspiron 13 7348 with Windows 10

  On my new Dell inspiron 13 7348 the microphone volume so low that my Skype partners can barely hear me. I checked all the settings in Skype and software audio dell and I updated all drivers... without success

  Connect a microphone extermal solves the problem, however, I prefer to not always have an additional microphone with me!

  Has anyone found a way to increase the volume of the microphone?

  Since an external device works well I'm afraid that the build-in microphone is actually of minor quality... what a disappointment

  So far, nothing has changed. I continue to go all my encounters with my laptop and this webcam with microphone build - in which I used the last in 2005... It's ridiculous... Don't know how many times I have had to explain to my colleagues why I use this external microphone... BTW, their Skype works well on non Dell computers with Windows 10 so I guess it's a problem that only affects users of Dell...

  As I said before, it's a big disappointment, and in the future I will avoid Dell products.

• How to quickly get 100 + photos from iPhone in pictures on iMac with the download speed very low broadband?

  Hi all

  I have an iPhone 6 Plus running iOS 9.3.1 and a retina iMac running OSX El Capitan 10.1.4.  I use iCloud photo library and I like the idea of having all the pictures synced across all devices.  This works well for one or two odd photos I take here and there.

  I have just been on vacation and taken 100 + photos with my iPhone and want to create an album of photo printed on my iMac, but the problem I am facing is that it takes so long to get the pictures on pictures on my iMac.

  My download speed high speed is very low - on 0.3Mbit / s, so the photos are always download to iCloud from my iPhone now, and I guess it will be another day or two to complete.

  Is it possible to get the photos from my iPhone to the iMac more quickly without creating duplicates or spoil my library?

  It's so frustrating to have to wait 5 days after her return from vacation before you can start making a photo album.

  Thanks for any help,

  Kind regards

  Ben

  You can connect the phone with USB and import or use iTunes sync or Capture of Image - this can cause a problem with duplicates

  And of course, you can stop by a store StarBucks, Apple (or other WiFi hotspot with good service) and complete quickly

  LN

• HP ENVY 17 F9M14UA #ABA TS: no audio beats since the upgrade to 10. St very low volume of the same volume at 100%

  Walking to Windows 10.  Loss of my audio Beats.  The volume is very low, so even than the value 100% volume

  Hello:

  See if reinstalling the audio driver solves the problem...

  This package contains the driver that allows to the Audio IDTHigh-definition (HD) in models of laptops that arerunning an operating system supported.

  File name: sp63555.exe

• Audio problem with Skype on the helmet

  Hello. I have a sound problem with Skype on my helmet, when I talk to my friend I can hear him on my helmet, although the rest of the sound on my speakers. How change that so I could hear any sound on my headset?

  You can try this:

  http://community.Skype.com/T5/Windows-desktop-client/Skype-audio-splits-to-both-headphones-and-speak...

• My computer microphone picks up sound at a very low volume. It is impossible to chat with no sound coming from my side! How should I do?

  My computer microphone picks up sound at a very low volume. It is impossible to chat with no sound coming from my side! How should I do?

  Buy a micro better use - one with noise suppression.  Sounds like inexpensive material.

• In my system C drive is very low space I'll increase the amount of space between the drive D & E hunt with problem

  In my drive C very low space is there so much with kindness help to change an additional drive space D

  Hello bethandbeacon.  I understand that you do not want to move some of your files.

  On most computers HP the D:\ drive is the recovery Partition.  You really should not move the files to this partition.  It is only to reinstall your operating system if something were to go wrong.

  If you are running low on space, you can try the tips in this article in order to free more space.

  Let me know if this can help, or if you have any questions.  Nice day!

• Latitude C640 with 1470 mini pci wifi has very low signal strength

  I just installed 1470 broadcom mini pci card with the 4.10.40.0 (from decompression R115321.exe) on a Dell Latitude C640 driver version.

  The card sees the network and connects, but I must be withinn 5 feet from the router, and even in this case the signal is 'Very low' (an or maybe 2 bars). I can communicate with various other wireless cards on other laptops with the full signal strength during the major part of the House.

  Why the intensity of the signal would be so bad?

  Is the 1470 is not very sensitive? the driver is bad for my setup? is there an INCOMPATIBILITY between the 1470 and the DLink DI-524 router? Is this an indication that the antenna on my wifi card is damaged? (I got it on ebay)

  Any help would be greatly appreciated.

  Thank you.

  Latitude C640

  Windows XP SP3

  Wireless 1470 mini pci card

  connected to the Dlink-524 (firmware 1.11) wireless router using WPA - PSK encryption

  
  

• Hello! I do a menu print of tarp for a round table, I did this from ms word since I have no idea where can we make a semicircle menu upside. My problem is that it has a very low resolution, please help me how to print possibly with 3' table

  Hello! I do a menu print of tarp for a round table, I did this from ms word since I have no idea where can we make a semicircle menu upside. My problem is that it has a very low resolution, please help me how to print possibly with 3' round table. Thank you

  Oh dear.  It turned into a terrible mess of a thread with opinions and advice.    You do your layout with Word.  In my experience, Word is a nightmare when it comes to positioning many areas of text and images.

  You shouldn't have changed the Word document in a JPG file, because the text all which perfectly progressive, which would be printed to "all" size without loss of image quality, then became an image file.  But if you "had" to make it a JPG, just about the worst possible way to do this is with the Snipping Tool, because the resulting image would have only the resolution of your computer screen.  Dows following?

  How big are the pictures you used in Word?  They probably didn't need to be very large, because each image is only an impression at a relatively small size.

  First thing to try is to open the Word Document and save in PDF format using the Standard option (after you select Save as PDF

  It will keep the text in the form of scalable vector objects which allows printing at any size.  However, I don't have the knowledge of how Word uses images.  I just did a little test, and while I could zoom in to see in the text, I'm not sure that the same is true of the images.  Depends on word refers to the image of the player, or he brings as an object of frame size, and I suspect it's the latter.  You need to do some research on it, because it might make you save a lot of time.

  You have Publisher?  Editor certainly reference the drive images, and friezer downsize to fit the page.  I suspect that you can import a Word into Publisher document, which would put you best part of the way with it.  I would like to test it, but I use it as a loyal user of Adobe InDesign.   If you are forced to restart, then editor or InDesign would be lot better, but it's doable with Photohop.  Just make sure that you start with enough pixels, which means 36 inches at 300 dpi or 10 000 square pixels.  When did save as PDF using the preset high quality printing, and ask your color printer (probably just use sRGB)

  Good luck