Similar Questions

• Names of the devices connected to the router

  How can I tell the names of the devices that are connected to my router E2000? Cisco connect says I have 4 devices but I only have 3. I'm trying to understand source of the 4 device.

  Open the Cisco connect software. Go to "Setting up the router" and click "Advanced settings". Who will open the router configuration page.

  Click the status tab. Go to the tab "Local network" sub on the button "DHCP Client table". Here is a list of the devices connected to the network.

• EMail address added to < < my device name > > < < my device name > > now using < < my mailadress (identical to the Apple ID) > > for FaceTime and IMessage.

  My iPod touch get now and then next alert message due to change on my iPhone.

  EMail address added to < < my device name > > < < my device name > > now using < < my mailadress (identical to the Apple ID) > > for FaceTime and iMessage.

  Why I get this message? iPhone is disabled due to my work offshore for two weeks, but the use of the iPod touch is allowed.

  What is my apple ID used on other devices with the same name as my iPhone?

  I would be happy if anyone has an explanation of why I feel this strange behavior.

  When you connect to FaceTime or Messages on another device, another peripheral other device using this same ID will get the message that has been signed to. Some iOS (and OSX) update log for other devices will get the message when that happens.

  You said "by reason of change on my iPhone"

  What has changed on the iPhone?

• Is there a way to see the ip address of the devices connected via the airport?

  Hello world

  Is there a way to see the ip addresses of the devices connected via the airport? I can see the name of the devices but not what ip are they?

  Thanks in advance.

  Open AirPort Utility

  Hold down the option on your Mac so you double-click on the image of the AirPort router

  Wireless clients are displayed

  Click on the small arrow next to each wireless client to see details about the device and the connection

• Email rec'd 'a device began synchronizing with devices connected to your Firefox account' Please explain

  What is happening with my account of Firefox? I received an email as follows: «a device started syncing with devices connected to your account in Firefox» If there is a security problem, Firefox's history on all my computers. Please explain what is happening here quickly. I think I'll remove the Firefox browser everything and start over with someone else. I can't take risks with my information.

  This isn't a security problem. With the team of Mozilla Sync, I have confirmed that it is an email waiting turning Sync in Firefox on a new computer, tablet or phone. In the future, they will cease to send this type of email to avoid worrying people.

• Qosmio G50-12 q - how to configure the devices connected to the USB mode standby

  Hello

  I wanted to use the PC sleep function.
  I also wanted to as devices that have been extinguished when in stand by.

  Once implemented this function the PC will regularly stand-by, but the device connected by usb are set on fire, any other master type, a device a usb wi.fi, etc.

  Someone told me that maybe some functions in the Bios only are not put in place to do that once entered the booth by the PC off all devices those connected.

  What checks and I have to perform in the configuration PC bios?

  How we in the bios? By pressing the keys on which?

  Thank you

  * valkyrie @ *.

  Please post comments if workaround posted by Akuma helped!

  It would be really appreciated.

• Equium P200-1ED is able to power external USB devices connected on it?

  (1) is anyone able to confirm if the Toshiba Equium P200-1ED is capable of powering an external USB device connected to it via one of its 6 USB ports?

  (2) what is the maximum power that the Toshiba Equium P200-1ED can provide only one USB port?

  (3) can the Toshiba Equium P200-1ED providing the power referred to in Question (2) above to each of its 6 USB ports?

  Please don t after several markets on the same subject.
  After you recommend first one:

  http://forums.computers.Toshiba-Europe.com/forums//message.jspa?MessageID=115025#115025

• My devices connect only to an airport machine

  I have two extremes of the airport, which connects to my modem and creates a network and one which runs the network. However, all of my devices are connected to the Airport Extreme that creates the network. What I am doing wrong? They are on different floors of the House and appear to be configured correctly, but the devices that sit on adjacent to the Airport Extreme, extension of the network does not connect to it. I know your supposed to have an Airport Extreme and multiple Airport Express, but we already had the old (4th gen. I think) Airport Extreme, so we decided to use it. Thank you!

  There is no difference between express and extreme to extend...

  However if you started near the main AE... you must turn off the wireless and then turn it back on... and it needs to connect to the Extender.

  Unless you have a problem in the configuration.

  Post screenshots of airport utility and we see what happens...

  Remember, if the signal is bad for the AE on the upper floor... It can transmit a signal any better than that. So if the client devices connect ok the Repeater is in the wrong place.

• Satellite A30 does not start with the USB device connected at boot time

  Hello

  I have a Satellite A30 and sometimes it does not start.
  After turning on, not even the BIOS starts.
  even if sometimes the BIOS starts, but the OS does not load.

  I figured out that its related to USB devices connected at boot time.
  If no USB devices are connected, it starts without a problem.
  Even if the start-up is suspended, as soon as you unplug start it BIOS USB devices.
  Its ok to connect USB devices later, once the system has started.
  I disabled "removable devices boot" and "network startup."
  just in case, but it makes no difference.

  BIOS is version the most recent (1.70) and it comes up with all kinds of USB devices.
  printer, mouse and (self-powered) external USB hard disk.

  Is this a known issue?
  There is no known workaround solution?

  Hello

  I put t know why this happens, but it has to do with the BIOS.
  The same thing happened on my old laptop. I couldn't start my unit while the USB printer has been turned on and connected.
  The only solution is to disconnect the external USB device during the boot process.

  RSY you should check if the order of boot in the BIOS has been on the HARD drive first.

• Device USB not recognized - device connected USB has malfunctioned and Windows does not recognize it

  I have a HP Pavilion dv4 laptop running Windows 7 Home Edition Premium and the USB ports worked well for a HP deskjet printer and an older Casio digital camera. Then one day, the laptop decided not to recognize the Casio digital camera and gave the error message "USB device not recognized" and also indicated that the device connected to the computer has malfunctioned. This prompted me to buy a new digital camera Canon. Well, a new camera has not fixed the problem. Now, anything that is connected to one of the 2 ports USB will not be recognized by my laptop. Help!  I am at a loss to understand this.  I tried using Microsoft suggested below:

  Suggestion 1: the problem with USB devices, uninstall and reinstall all USB controllers. This allows controllers to recover the port USB of his condition does not respond.
  USB controllers represent the USB ports in Device Manager.

  a. Click Start, type Manager of devices in the search box of start and press ENTER.
  b. expand Bus USB controllers.
  Note: you may scroll through the list to find this point.
  c. the first USB controller under Bus USB controllers right click and then click on uninstall to remove it.
  d. Repeat steps above for each controller USB is listed under Bus USB controllers.
  e. restart the computer. After the computer starts, Windows will automatically check for changes on the hardware and reinstall all USB controllers that you uninstalled.
  f. check the USB device to see if it works.

  This has not fixed the problem.  Then the Device Manager, I tried to update the drivers on all the USB controllers and root hubs. While some may have received software updates downloaded, it still has not corrected the problem of unrecognized USB device after the computer is restarted.  I hope that someone knows the solution to this situation and can pass it on to me. Thanks for reading and any help display.

  Read previous messages revealed the solution for USB devices not recognized on my HP Pavilion as well as several other laptop models.  Shut down the computer and remove the battery and wait for about 15 minutes. Reinstall the battery and restart the computer.  USB ports are working to download pictures from my digital camera from Canon and charging a cell phone, etc...   I hope it helps others with this problem!

• Do output sony 5.1 HDMI, audio devices connected TVS optics carry

  Hello

  Try to connect it to an existing SONOS system.

  All HDMI devices must connect to the TV.

  Worried that Audio optics translates PCM instead of keep 5.1 if it is how the content is

  Thank you

  Chuck

  Yes, the optical port of the TV would be able to sound output from devices connected using HDMI connection. Make sure that the settings on the source device is set to 5.1 surround sound output.

  If my post answered your question, please mark it as "accept as a Solution.

• We are trying to install FSRM (File Server Resource Manager) in windows server 2 k 3 R2 SP2. After installation, its error message that gives as no network device connected. Suggest me!

  Original title: problem in installing FSRM

  We are trying to install FSRM (File Server Resource Manager) in windows server 2 k 3 R2 SP2. After installation, open the FSRM in "All programs", its error message that gives as no network device connected.  Suggest me!

  Hello

  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Windows 7 networking forum.

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

• Audio event system has detected a device connection event audio location description of the Panel right-Black Jack

  I have no sound on my Dell inspiron 6400. Volume is not muted, sigmatel peripheral is enabled, hardware (speakers laptope) work, drivers have been updated and reinstalled.  Windows xp service pack 3.  The problem occurred after that children were playing a game of Dora on CD.  Above the popup of the event (System event Audio Audio System has detected a device connection event audio description location of the right panel Black Jack) appears.  Can get sound by using an external speaker.

  I note a number of comments suimilar on other sites but no resolution on these offers from

  If you go into Device Manager, you see a yellow fringe (!), which reports an error?

  To access the Device Manager in Windows XP:

   

  1. Click Start and then click Control Panel.

  2. Click the performance and Maintenance link.

     Note: If you see the Classic view of Control Panel, you will not see this link. Simple, double-click on the System icon and go to step 4.

  3. In the performance and Maintenance window, click the icon at the bottom of the window .

  4. In the System Properties window, click the hardware tab.

  5. The hardware tab selected, click the Device Manager button.

  Double-click sounds and game controllers.
  This will bring up a dialog box. From there you can update drivers, see the details of driver and driver rollback.

  If you uninstall CD Dora, you are able to get her back? It may be a conflict with the 3rd party product.

  Please let us know.

• How to find on which device connected to my system does not work?

  I have XP Professional.  Cannot start Windows Driver Foundation-User Mode Driver Framework(Manages user-mode driver host processes.)  In the window 'services.msc' and try to start Windows Driver Foundation, I get the message: "error 31 - failed to start service. A device attached to the system does not work. "Question: how to find on which device connected to my system does not work?

  1. click on start and then click Run.
  2 type devmgmt.msc in the run box and press ENTER. This will open your device manager.
  3. in the Device Manager window, click view, and then click Show hidden devices
  4. develop options in your device manager and see if there are any device with a yellow exclamation point or something that is rare. If you find one, you can uninstall and reinstall the driver for this device, as long as you have the installation for device drivers files.

  I hope that helps!

• Irritating device connect/disconnect sounds

  I have a Dell Vostro 1510 laptop with the update to SP3 and XP Professional operating system. While listening to a music CD, I get intermittent device unplug his follow up immediately by the device connect sound. There is no indication of the offending device. What gives?

  Hello

  1. have you made changes on the computer before this problem?
  2 do you find this sound only during playback of music CD?

  Step 1: Search for the issue in the clean boot state.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Reference:
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
  1. click on Startand then click run.
  2. type msconfigand click OK.

  The System Configuration Utility dialog box appears.

  3. click on the general tab, click Normal Startup - load all device drivers and services and then click OK.
  4. When prompted, click on restart to restart the computer.

  Step 2: Also, look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.

  Reference:
  Using the event viewer
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/snap_event_viewer.mspx?mfr=true

  Understanding of event viewer
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/event_overview_01.mspx?mfr=true

  Procedure to view and manage event logs in Event Viewer in Windows XP
  http://support.Microsoft.com/kb/308427