NAC - not in HTTPS in the NAC (CASE) servers

I was wondering if anyone has seen this issue.  I am not able to HTTPS in my NAC servers, but I'm still able to manage via my managers of the NAC.  What would cause this?

David,

The network you are trying to access your CASs, is this part of the network of managed subnets CASs?

Faisal

Tags: Cisco Security

Similar Questions

  • Question of the NAC CASE HA

    Hello

    I currently have an IB and OoB VG environment. BOTH work fine, but now I want to add HA at a time. Watch you documentation (CASE 4.1.3 user guide) I see that I need to two addresses IP of Service, one for the trust interface and one for the unreliable. In my case because they ar works normally in mode VG, iwould have the same ip address in both approved and not approved. Is the same applies for addresses IP of Service? can I use the same ip address of service on both sides?

    Should I total 1 three IP addresses for both of the IB of the int AC, 1 for the two int of the OoB AC and 1 for both addresses IP of Service?

    Thanks in advance for any info...

    For a VGW solution, you must use the same IP for approved and unapproved.

    You will need three IP addresses: primary real IP, real school, of the Service. It is a system not by interface.

  • IMEI on the rear case have 1 number that does not correspond with the *.

    Hello

    I checked my Imei on 5 and I noticed that on the back casing has 1 digit does not match one that shows up on * #06 #.

    *#06#:  **************

    case back: *.

    I check the imei number with: https://checkcoverage.apple.com/ , imei number on the * #06 # is correct.

    Please tell me what might be wrong here.

    Thank you.

    < personal information under the direction of the host >

    I have no idea what * # is #06. However, the back case can be changed (the warranty and do who knows what other damage). If the phone, that shows that the IMEI?

  • My computer crashed and I reinstall first elements 7, but it will not recognize my serial number there are two on the CD case please help

    My computer crashed and I reinstall first elements 7, but it will not recognize my serial number there are two on the CD case please help

    When you ask a question you will need to provide some basic information

    Mac or Windows and EXACTLY what version of the operating system?

    Recent Mac AND Windows operating systems have been known to cause problems "weird."

    Lost information - response #1 in https://forums.adobe.com/thread/2008767

    Invalid License http://helpx.adobe.com/creative-suite/kb/error-serial-number-valid-product.html

    -http://helpx.adobe.com/creative-suite/kb/invalid-serial-number-cs4.html

    - and http://forums.adobe.com/thread/1038761

  • Model of session not in sync with the Http Session

    Hi all

    I have an application developed in JDev 11.1.1.4 and we do not use the ADF security for the connection.
    The problem occurs, random is that some of the LOV on my homepage get null (having no data). These LOVs are met using the values passed as a parameter of the feeder link (values fundamentally HTTP session to the web layer). So I added a method in the workflow to set the value of session at the model layer (default method). Also, each call to the call of the Impl Am I am setting the value in the HTTP session and then call the method, but some how what is the value of model session level is not in harmony with the HTTP session and the list is empty.

    The entries of what I can do to get out of this prblm?

    thnk

    In this case you need to replace the method of activateState/passivateState of your store/bed and am the values of the xml structure, you get as parameters to this method.
    For more information, see the docs http://download.oracle.com/docs/cd/E12839_01/web.1111/b31974/bcstatemgmt.htm#sm0495

    Furthermore, is nothing, you must open a SR on that it works as expected.

    Timo

  • all the site went "not found HTTP 404 error. The requested resource is not found. "and the"Firefox cannot load Web sites but other programs can"page is not helping

    all the site went "not found HTTP 404 error. The requested resource is not found. "and the"Firefox cannot load Web sites but other programs can"page is not help somehow

    One possible cause is security software (firewall, antivirus) that prevents or limits Firefox or plugin-container process without informing you, possibly after the detection of changes (update) for the Firefox program.

    Delete all rules for Firefox and the plugin-container in the permissions list in the firewall and leave your firewall again ask permission to get full unlimited access to the internet for Firefox and the plugin-container and the update process.

    See:

    You can try to reset (power off / on) of the router.

  • Why do I not see http or https in front of the web sites that I visit?

    At the top of THIS page, I see mozilla.com , then https://support but when I go to any other page such as www.cnn.com or www.msnbc.com I see NOT any http or https in front of her. IF I try to go on my site of the Bank, it will load the information before and fill https as I expected, but I don't see where I get to show me a framework.

    It is the result of a very undesirable evolution 7.0.1 to copy what Google Chrome is doing and what Google in the search results.

    Firefox is customizable and configurable. It is regrettable that the simple original/more coding is always changed and we have to cancel then steal as much CPU changes with corrections more to restore the original intent and content. For the solution, see

    Please mark "resolved" a response that will better help others with a similar problem - hope it was her.

  • Tried everything: 1 address, but not able to connect via HTTPS to the server:

    Hello

    I am trying to connect to the third of the OSB business service web service.

    objective WS is protected with SHA1 base 64 encoded password.

    I am able to connect to the service target of SOAP UI. I am also able to Telnet to my server for dev to the URL of the WS.

    But when connecting from OSB BS I'm tried them all: 1 address, but not able to connect via HTTPS to the server: error.

    Can you please help me solve the problem.

    I tried different policies, but still does not work.

    Kind regards.

    Problem solved. We need to use the proxy server.

  • I bought Photoshop CS2 in 2005. I recently changed my PC and load the software on the new PC.  I load the CD and proceed through the steps.  When it's time to serial number software tells me the serial number on the CD case is not valid

    I bought Photoshop CS2 in 2005. I recently changed my PC and load the software on the new PC.  I load the CD and proceed through the steps.  When it's time to serial number software tells me the serial number on the CD case is invalid.  It is the same serial number, I used previously.  How do I remedy this situation so that I can use the software on my new pc?

    First, use the serial number to the right of the download for Windows.

    Do not place information in the field of the Organization after you enter the number. Which causes problems.

    If you have windows 8, you may need to change the directory to progra ~ 2 on some 64-bit windows systems:

    The reason for the use of progra ~ 2 on a 64-bit system when installing a 32-bit application is the 8 character limit imposed by Windows. PROGRA ~ 2 totals up to 8 characters, program ~ 2 is 9

    You have 2 options:

    1. in the installation, change your path to C:\progra~2\... and install it. It should work.

    2 copy Setup on your local drive. The right click on Setup.exe, properties > Compatibility tab > run in compatibility mode. The choice of XP SP2. Click OK. Run Setup.exe

    Either we have to work.

  • my cc to photoshop updated to 2014.2.0 in text only mode can type the top case. can not lowercase

    my cc to photoshop updated to 2014.2.0 in text only mode can type the top case. can not lowercase

    my windows 7 pro 64-bit

    someone had this case? and help

    Thank you

    Check the character Panel. Is "all caps" (TT) on?

  • Case suggestion for the 13th of Yoga? Not a fan of the deal official

    Hello

    I put the yoga today and I am very happy with it so far. I was wondering if you guys have a recommendation for one reason other than the official case of slot because the official case leaves a bit of yoga exposed and vulnerable to scratches.

    Thank you

    I like the official case because I use it when I'm in tablet mode, it protects the keyboard.

  • lost my series for adobe photoshop elements 13. I was a fool and I threw away the box and the cd case, thinking that I would not need for my new computer. Is it possible that I can get my return series so I can install the program?

    I lost my serial number for my copy of adobe photoshop elements 13. I was a fool and I threw away the box and the cd case, thinking I wouldn't need never the number. Is it possible that I can retrieve my serial number or maybe get a new?

    If you have registered the software when you installed it first, then you might find the serial number in your Adobe account online.

  • xdg-open does not take into account the url and opens the different website when Firefox is the default browser in Ubuntu

    I am running Ubuntu 14.04 64 bit with Firefox version 38 for Ubuntu
    It is complected, and I tried to explain everything clearly.

    Today, I noticed a strange behavior.
    I have several URL saved as .desktop files.

    I use webupd8.org as example.
    The code for the exec in the desktop file is:
    Code:

    Exec=xdg-open http://www.webupd8.org/
    

    Today, I noticed that if I try to go to webupd8.org, or most of the other sites, by launching the .desktop file for this site, or by typing the url
    Code:

    http://www.WebUpd8.org/

    in the dashboard Firefox opens to a completely different site. The site that opens is a site that I set up for my children's grandparents to watch videos and see photos of the children. This Web site opens each time. I'm not be directed to a site at random each time. This is the case when I try to visit the webupd8.org OR one of several websites using .desktop file or enter the url you want in the dashboard. Whenever I went to my own domain.

    It happens that I have also several sites registered in a reminder in the Firefox icon in the Launcher sidebar thing in Ubuntu.
    In the case of the beast, the exec code is slightly different and it still responds as it should. In this case, I have:
    Code:

    Exec = firefox-new-tab http://www.webupd8.org/

    Also, if I change my default in opera browser, for example as .desktop files and entering the url directly in the dashboard work as it should.

    To recap:

    When Firefox is the default browser, enter a url in the dashboard or use a to surf to a desired site .desktop file causes my be redirected to my own domain name (which is hosted remotely and not on this computer).

    If, however, I change the Exec command in the .desktop file
    Code:

    Exec=xdg-open <url>
    

    TO
    Code:

    Exec = firefox-new-tab < url >

    the .desktop file will open Firefox and go to the desired site.

    If I change the browser by default Firefox to another browser, everything works as it should and has always so far. That is, with the Opera for example, both
    Code:

    Exec=xdg-open <url>
    

    and
    Code:

    Exec = firefox-new-tab < url >

    result in the browser by opening and going on the planned site. Typed a url in the dashboard is not a problem if the default browser is not Firefox.

    Anyone seen this before? If so, how to solve it?

    Thank you very much for your answers!
    I checked the url of the home page in Firefox and it has been set at startpage.com, but then when I looked at the default programs in Ubuntu, I noticed that the default program for the web had been unintentionally configured to use a .desktop file that leads to t he admin for my Web site login page.

    I changed this back to Firefox and the problem was solved.

  • My site is not correctly appear in the Firefox browser. Can you help me?

    My site is not correctly appear in the Firefox browser. Can you help me?

    My Web site: http://hayro.la

    You can have zoomed pages by accident.
    Reset the zoom of page on pages that are causing problems.

    • View > Zoom > reset (Ctrl / command + 0 (zero))

    You can try the following steps in case of problems with web pages:

    You can reload webpages and ignore the cache to refresh potentially stale or corrupt.

    • Hold down the SHIFT key and click the Reload button
    • Press 'Ctrl + F5' or 'Ctrl + Shift + R' (Windows, Linux)
    • Press 'Command + shift + R' (Mac)

    Clear the cache and delete cookies only from Web sites that cause problems.

    "Clear the Cache":

    • Firefox/tools > Options > advanced > network > content caching Web: 'clear now '.

    'Delete Cookies' sites causing problems:

    • Firefox/tools > Options > privacy > "Use the custom settings for history" > Cookies: "show the Cookies".

    Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.

    • Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
    • Do NOT click on the reset button on the startup window Mode safe
  • CAPTCHA does not. have tried all the solutions support and installed the new FF. still does not. Help.

    CAPTCHA does not. have tried all the solutions support and installed the new FF. still does not. Help.

    Try creating a new profile as a test to check whether your profile is the source of the problems.

    See "basic troubleshooting: a new profile:

    There may be extensions and plugins installed by default in a new profile, so check that in "tools > Modules > Extensions & Plugins" in case there are still problems.

    If the new profile works then you can transfer files from the old profile to the new profile, but make sure not to copy corrupted files.

    See:

Maybe you are looking for