Name covering the sticker in the see column
Hello
I recently had problems with the pictures of the column view. It seems that sometimes the name which is normally displayed on the file begins to display on top of the thumbnail of the file on the far right. It will happen usually after I moved to a new file and a new preview. I will include pictures to illustrate:
Here's an example of what it should look like:
Here is an example of the question:
The question is easy, although temporarily fixed by changing to a different display format, such as list and switch back. I'm more worried that this may be an indication of some sort of bug or problem.
All this began after I had several problems do transfers of data on three different drives, and my phone has restarted following a 'problem '. Please let me know if anyone has come across this problem before, or has any ideas about what may be the issue. I already rebooted my laptop a few times as good viewfinder also restart all leaving the laptop on... Specific computer below information:
MacBook Pro (13-inch, mid-2012)
El Capitan 10.11.5 OSX
Processor: 2.9 GHz Intel Core i7
Memory: 16 GB 1600 MHz DDR3
Graphics card: Intel HD Graphics 4000 1536 MB
Let me know if there are any other details necessary to diagnose this problem. Thank you.
Try the start mode by holding down the SHIFT key at startup. Secure boot is quite slow because the operating system performs some cleanup and verification tasks, so give it time. Once you're completely connected, restart normally.
Tags: Mac OS & System Software
Similar Questions
-
Column of Outlook Express folder in find
When Outlook Express 6 detects emails from a name in the right column indicates the folder in which it is in. How can you tell which folder this folder is located in?OE does not have the capacity to tell you where the folder is located in the folder hierarchy. You can select different trees under local folders to find what subfolder is and what kind of tree it is under. Unless folders.dbx is corrupted (which happens a bit), then OE will not create folders for you. If folders.dbx is corrupt or not, I would suggest that you backup the files and the registry (see www.oehelp.com/OETips.aspx#6) before things become corrupt, because you seem to have a complex organization from your e-mail folders.
Steve
-
adding multiple files *.csv while retaining the original file name in the first column
Hi guys Cela made some time.
I am trying to add several *.csv files while retaining the original file name in the first column, the real data set is about 40 cases.
file a.csv contains:
1, line an a.csv
2, line 2 in a.csvfile b.csv contains:
1, line a b.csv
2, line 2 in b.csvresult output.csv is:
I would like this:
a.csv, 1, the line in a.csv
a.csv, 2, line 2 in a.csv
b.csv, 1, the line in b.csv
b.csv, 2, line 2 in b.csvAny suggestions to speed up my hobbling attempts would be aprieciated
Thank you
-SS
What you could do is given in attachment.
Started with 2 files:
a.csv
copy of a.csv
Both with data:
-
I want to get only year sysdate with my name of the defined column. but not able to get it.
SQL > select to_char (sysdate, 'yyyy') as 'mahesh tyagi' from dual;
Mahé
----
2015
SQL > select to_char (sysdate, 'yy') as 'Manu' from dual;
my
--
15
So I couldn't do 'Manu' or "mahesh tyagi" as the column name.
The column name is "mahesh tyagi" is simply displayed it shortened to sqlplus due to the known values in the column length.
create table year_test select to_char (sysdate, 'yyyy') "mahesh tyagi" double;
year_test / / DESC
You can change the way sqlplus displays the header of column with something like
column "mahesh tyagi" format a15
-
How to get the names of the table columns in the quick dashboard
How to get the names of the table columns in the quick dashboard
Thanks and greetings
------------------------
Kishore PMake a prompt like:
SELECT case when 1 = 0 then 'D0 time. " "" T02 by month name "other" 'D2 market' '. "" M04 region' ' the end 'Sample Sales' UNION ALL SELECT case when 1 = 0 then 'D0 Time. " "" T02 by month name ' else ' 'Time D0. "" T02 by month name ' ' the end 'Sample Sales.
Put the name of column in single quotes.
Make your rank as a function:
Rank ('F1 income'. "" Recipes 1-01 (after all) "by @{pColumn} {'D0 time'. ({"" T05 annually name '})It works fine for me
concerning
John
http://obiee101.blogspot.com
-
name of the variable column for a source
Can I have a column name variable for a text box, such as this one source
Select (: P2_column_name) of the budget where id =: P2_id;
I get the: P2_column_name variable and not really the content of the column.
what I am doing wrong, thank you, DougOnly works for reports. It sounded like you want to select in a correct form, update the value and then present at the table element?
Thank you
Tony Miller
Webster, TXI cried because I don't have an office with a door until I met a man who had no cubicle.
-DilbertIf you answer this question, please mark the thread as closed and give points where won...
-
Get the name of the column of row
All,
In my Jdev 11.1.2 app I want to know the name of the attribute column that is modified. I am able to get the attribute name that currently use the getAttrbute() on the line (if you open the VO we see name |) Type of | Column, etc.). How can I get the name of the column?
For example: the name of the attribute is Nom_tiers, column name can be Party_Name. I am able to do Nom_tiers but not Party_Name.
thnks
Published by: in the line of fire on 14 December 2011 14:13getEntityAttrForAttribute("attribute_name_here").getColumnName)
-
Return all column names of the cells that match a value in a single cell
I want to be able to scan all the cells in column 1 in column 3 (there could be several) which belong to the same line and check if they all have a value y (X). If they have no value, I want all columns to display all the names of the matching columns as follows: "column 1, column 2" for Elemento.
This can be a good start:
B2 = if (counta (C2) > 0, C$ 1, "" ") & IF (COUNTA (D2) > 0', ' & D$ 1," ") & IF (COUNTA (E2) > 0', ' & E$ 1," "") & IF (COUNTA (F2) > 0', '& F$ 1,' ')
It's shorthand dethrone select cell C2, then type (or copy and paste it here) the formula:
= IF (counta (C2) > 0, C$ 1, "" ") & IF (COUNTA (D2) > 0', ' & D$ 1," ") & IF (COUNTA (E2) > 0', ' & E$ 1," "") & IF (COUNTA (F2) > 0', '& F$ 1,' ')
Select cell B2, copy
Select the cells B2 the bottom of column D, dough
To add additional columns, you copy the atomic unit:
& IF (COUNTA (D2) > 0', '& D$ 1,' ')
and update D2 with the new column and D$ 1 with the new column.
then... If you add a new column (G, for example) that you want to change it:
and IF (COUNTA (D2) > 0', '&D$1,' ')
TO
and IF (COUNTA (G2) > 0', "&G$1," ")
and the updated formula would be:
= IF (counta (C2) > 0, C$ 1, "" ") & IF (COUNTA (D2) > 0', ' & D$ 1," ") & IF (COUNTA (E2) > 0', ' & E$ 1," "") & IF (COUNTA (F2) > 0', ' & F$ 1,"") & IF (COUNTA (G2) > 0', '& G$ 1,' ')
fill down like before
-
Combine the two columns of text
I have two columns of text (say that name is a column and the name is the other)
I would like to combine the two columns for the text of these two columns are in a column. (First name and last name in the same column)
Is this possible? If so is there a tutorial somewhere?
Hi Danielle,
The & (concatenation operator) is your friend.
Formula in D2 (fill down)
"B2 &" "& C2.
& joins elements into a single string.
"" inserts a space.
Kind regards
Ian.
-
Validate the XML column when inserting
Hello
I'm on 11 GR 2.
I have a table
create table root_table (id number, text xmltype);
I tried to sign up:
Start
dbms_xmlschema.registerSchema ('test', xmltype)
"' < xs: schema xmlns: XS ="http://www.w3.org/2001/XMLSchema"xmlns:xdb ="http://xmlns.oracle.com"elementFormDefault ="unqualified">
< name XS: complexType 'RootType' = >
< xs: SEQUENCE >
< xs: element name = "Required" / >
< xs: element name = "Énumération" >
< xs:simpleType >
< xs:restriction base = "XS: String" >
< xs:enumeration value = 'A' / >
< xs:enumeration value = 'B' / >
< xs:enumeration value = 'C' / >
< / xs:restriction >
< / xs:simpleType >
< / xs: element >
< xs: element name = "MinLength" >
< xs:simpleType >
< xs:restriction base = "XS: String" >
< xs:minLength value = "4" / >
< xs:maxLength value = "20" / >
< / xs:restriction >
< / xs:simpleType >
< / xs: element >
< xs: element name = "MaxLength" >
< xs:simpleType >
< xs:restriction base = "XS: String" >
< xs:minLength value = "1" / >
< xs:maxLength value = "4" / >
< / xs:restriction >
< / xs:simpleType >
< / xs: element >
< xs: element name = "MaxOccurs" type = "xs: String" maxOccurs = "2" / >
< xs: element name = "MinOccurs" minOccurs = '2' maxOccurs = "2" / >
< xs: element name = "Optional" type = "xs: String" minOccurs = "0" / >
< / xs: SEQUENCE >
< / xs: complexType >
< xs: element name = "root" type = "RootType" xdb:defaultTable = "ROOT_TABLE" / >
((< / xs: Schema > '));
end;
/
table should point to the table where the XML column is default, I guess that
is the 'root' in the same line a reference to the name of the xmltype column?
Now - how do I ensure the XML I have insert in the column "change" is validated against the schema above?
concerning
Mette
For both options, save the diagram with these options (you can substitute the url of course):
Start
() dbms_xmlschema.registerSchema
schemaURL-online "test.xsd.
schemaDoc-online xmltype (bfilename ('TEST_DIR', 'test.xsd'), 873)
local-online true
genTypes-online fake
genTables-online fake
enableHierarchy-online dbms_xmlschema. ENABLE_HIERARCHY_NONE
options-online dbms_xmlschema. REGISTER_BINARYXML
);
end;
/
Then the #1 option:
create table root_table)
Identification number
text xmltype
)
XMLType column can store as xml binary securefile
XmlSchema 'test.xsd' element 'root '.
;
SQL > insert into root_table values (1,
2 xmlparse (document
3'
')4
5
A 6
XXXX 7
12345 8
9
10
11
(12);
insert into root_table values (1,
*
ERROR on line 1:
ORA-31061: error XDB: XML error event
ORA-19202: an error has occurred in the processing of XML
LSX-00222: "12345" is too long (maximum is 4)
SQL >
SQL > insert into root_table values (1,
2 xmlparse (document
3'
4
5
A 6
XXXX 7
1234 8
9
10
11 ')
(12);
insert into root_table values (1,
*
ERROR on line 1:
ORA-31061: error XDB: XML error event
ORA-19202: an error has occurred in the processing of XML
LSX-00213: only 1 occurrences of the 'MinOccurs' particle, the minimum is 2
SQL > insert into root_table values (1,
2 xmlparse (document
3'
')4
5
D 6
XXXX 7
1234 8
9
10
11
12
(13);
insert into root_table values (1,
*
ERROR on line 1:
ORA-31061: error XDB: XML error event
ORA-19202: an error has occurred in the processing of XML
LSX-00290: invalid enumeration choice "D".
SQL > insert into root_table values (1,
2 xmlparse (document
3'
')4
5
A 6
XXXX 7
1234 8
9
10
11
12
(13);
1 line of creation.
For the #2 option:
create table root_table2)
Identification number
text xmltype
)
XMLType column can store it as clob securefile
;
create or replace trigger root_table2_biu_t
before the insert or update
on root_table2
for each line
declare
doc xmltype: =: new.tekst.createSchemaBasedXML ('test.xsd');
Start
doc.schemaValidate ();
end;
/
SQL > insert into root_table2 values (1,
2 xmlparse (document
3'
')4
5
D 6
XXXX 7
1234 8
9
10
11
12
(13);
insert into root_table2 values (1,
*
ERROR on line 1:
ORA-31154: invalid XML document
ORA-19202: an error has occurred in the processing of XML
LSX-00290: invalid enumeration choice "D".
ORA-06512: at "SYS." XMLTYPE", line 354
ORA-06512: at DEV. "" ROOT_TABLE2_BIU_T ", line 4
ORA-04088: error during execution of trigger ' DEV. ROOT_TABLE2_BIU_T'
Both options will perform a validation of strict type.
There are other possible configurations, such as CLOB based on a storage schema, but this approach is now obsolete.
If you are only interested in whether the XML instance is valid or not, you can also use a constraint check with the XMLisValid function.
-
Stored in the BLOB column display PDF problem
Hello everyone.
I tried to follow this tutorial http://asktom.oracle.com/pls/asktom/f?p=100:11:0:p11_question_id:232814159006 on the display of PDF files stored in BLOB columns. This is done on Apex 4.2, with my DB 11 g running. I have my procedure, which I will post below:
I am trying to run this through a region dynamic PL/SQL, and even if I don't get any error, the content displayed is a huge mess of truncated text and strange characters. I tried to run this procedure on many other types of documents, including word and jpeg image files, all with the necessary changes in my inside, and regardless of what I use, I always get a big mess of strange characters. Does anyone have information or ideas why this is happening?create or replace procedure "PDF" (p_id IN gvo_documents.doc_id%type) is l_lob blob; l_amt number default 30; l_off number default 1; l_raw raw(4096); begin select contents into l_lob from gvo_documents where doc_id = p_id; -- make sure to change this for your type! owa_util.mime_header( 'application/pdf' ); begin loop dbms_lob.read( l_lob, l_amt, l_off, l_raw ); htp.prn( utl_raw.cast_to_varchar2( l_raw ) ); l_off := l_off+l_amt; l_amt := 4096; end loop; exception when no_data_found then NULL; end; end;
If I understand correctly, your needs must be broken down into two problems:
1) click the link that opens a window showing a new APEX page
(2) an APEX page displays the document, download it not.I did not (yet) #1.
However, you can generate a URL that points to the new page in the select for the report.It's a related issue, but no response yet:
Open the pdf file in the browser windowThe key is to target = "_blank" to the anchor tag.
To generate the URL, you must use the APEX_UTIL.prepare_URL () function.If this does not work, a dynamic Action that makes magical things of JavaScript may be necessary.
# 2, I lost the URL that showed how to display a PDF file in a page "form.
From what I remember:
Start with a blank page with a pristine area of HTML (all items will in the HTML area)
Add an element to the PK/annual
part I forgot Create a Data Manipulation process
-Automated row Fetch
-By loading - after the header
-(stuff for your table/view)
part I forgot Create a (I think) "File browser" item type. For the parameters:
-Storage of Type "BLOB column specified in the Source element" (and put the name of the BLOB column)
-MIME Type column: (column name) - since there are several types, this is a MUST HAVE
-Filename column: (column name) - I highly recommend you have this.
-Provision of content is INLINE<-- this="" is="" the="">-->In addition, you will need a browser for each of the Types MIME Plugin (if not, the browser may try to "Download" the file)
Browsers can manage the types of images internally. Plugin Adobe can handle PDF files. I do not know Word/Excel.Yet once again, I don't remember the exact details, but that should cover most of it.
MK
-
In the Data Modeler, a FK column takes its name from the name of the associated column in the PK.
Is there a way to display the name of the FK column to something else?
For example, table emp a PK emp_id. If I create a FK to dept to represent the Director of this Department, the FK column is called emp_id. I call it mgr_emp_id.Go to tools - > Preferences-> Data Modeler-> logic-> FK attribute synchronization and uncheck the option name. Now, you can replace the name of column gene4rated with your name mentioned.
-
maximum length of the name of the table.
Hi all
I think that the maximum length of the array and the name of column in oracle 11g is 30 characters.
I want to increase the limit I want to import a mysql database that is to have more big names in the table.
I can set the length of the name and the table column name?
Thanx.Before the migration, you can rename your tablename in MYSQL
http://docs.Oracle.com/CD/E12151_01/doc.150/e12155/oracle_mysql_compared.htmYou can't increase and change the length of the table
-
Interactive report will not save the BLOB column attributes
I created several interactive reports with the 4.0 and 4.1 which had columns of type BLOB with no problems and the download link worked fine. After 4.2 update, interactive reports get the following error when you click on the download link:
Not found
The requested URL /apex/apex_util.get_blob was not found on this server
If I open the edit page of the report, the BLOB downloads very well. When I looked at the report in detail the attributes of the BLOB column, I noticed that the BLOB column attributes had not been met. I tried several times to fill in (name of the Table column name, Primary Key, MIMETYPE, etc), but after applying changes and reopen the attributes page for the blob column, the values, that I entered is not saved.
For completeness, here is the select statement for the report:
Select "DESC_ATT_ID."
"BR_ID,"
"FILENAME."
"MIME TYPE"
DBMS_LOB. GetLength ("DESC_ATTACHMENT") 'DESC_ATTACHMENT '.
of ' #OWNER # '. " ALTEC_BR_DESC_ATT ".
WHERE BR_ID =: P3_BR_ID
Also, here is the value for the number/Date of the BLOB column format:
DOWNLOAD: ALTEC_BR_DESC_ATT:DESC_ATTACHMENT:DESC_ATT_ID
Can someone tell me please in the right direction to get the link to the interactive report work correctly?
Thank you very much
JerryHello
How about you, you do not format BLOB column, do you it manually like this example here:Apex. Oracle.com
workspace: somefeto
user: test
PWD: test
Application 63066in the same workspace, there is Sample File Upload and Download (App ID 10540), and it works very well...
If not, Pls, reproduce the problem on apex.oracle.com
Best regards
Fateh
------
If you believe that my answer is correct or helpful to you pls, then mark the reply as useful or correct -
Display the role name in the field "descriptive data.
Hello
According to the requirements of the standard, we have to show the role name in the "Description" column in the resource profile screen.
Currently, his watch an orc_instance_key number random.
We can map the attribute name of role to 'descriptive data', so that the name of the role is displayed in the column?
Help, please.
Kind regards.The role name field is available in the form of process? If Yes, go to design console open your definition of process and then click descriptive field map select role name.
Maybe you are looking for
-
Never had this problem until what MS downloaded and installed updates (for Windows7). So I said I'm going to widows 10 because I thought anyway, so I did this - still cannot open a new tab, or by clicking on the tab '+' or 'ctrl + T.I spent about an
-
Why can not I reload firefox using internet explore for windows 8.1?
I'm trying to reload firefox on my computer which uses windows 8.1. I had the browser here for years. I tried to download many sites and it keeps stuck in download mode or I get the message that blocks windows. I've never had this problem before. It
-
Diagnostics of Lenovo - standalone boot works? not!
https://forums.Lenovo.com/T5/ThinkPad-T400-T500-and-newer-T/help-kernel-panic-Lenovo-diagnostic-boot... 4.0.0.6027, start of Linux version works, 29/10/2014.
-
Satellite Pro A200GE-24 s - need Win XP drivers
Hello! I would like to buy a Toshiba Satellite Pro * A200GE-24 s * belonging apparently to * PSAE7E-01V010EN * series. All right, except that I would like to reinstall Windows Vista to my own copy of Windows XP. Problem is that I need to find the rig
-
EliteBook 8470p: lack of network drivers for elitebook 8470p
Hello world! I formatted my HARD drive and tried to reinstall win 7 pro (64 bit) home and he has reinstalled everything except my networking capability. The following devices appear in Device Manager with triangles of signs under 'other devices '. -E