name the new dvd

When I put in a new DVD the computer automatically gives the new DVD of emptiness, a strange name with Chinese characters. I rename the new DVD, but is it possible to automatically find a blank for the name row or perhaps the date?

It is usually a function/option of the burning in use software.

Tags: Windows

Similar Questions

  • Windows 7 serial key is integrated in the new DVD of restoration?

    Hello!

    I set up my laptop, but the key of Win 7 is not readable...

    Is the key in restoring integrated image or do I have to indicate the same as a 'normal '?

    Is the key integrated if I order the new DVD of restoration?

    Thank you!

    The recovery disk contains the image of Toshiba and this image Windows 7, drivers and other software. Windows 7 is already enabled and requires no serial key.

  • Deliver the new DVD player.

    After you have installed a replacement from dell DVD player in my Office Dimension 4700 running XP PRO, the system shows the old drive with description of the DVD-RAM drive (D :). Drive D: is the name for the original DVD drive, which is fine. However, the system now displays a new disk, disk removable (f). This drive F: actually does not exist. How can I remove it. Any help is appreciated with gratitude. Thanks in advance.

    Dave

    Ok.

    I don't see that attaching your Kodak 50 in one has any merit of diagnosis.

    You have not said what happens if you insert a memory card in the HP.

    Internet research indicates that the Dell 942 also has a card reader location. That do my previous test and see what happens.

  • 1800 514 does not start with the new dvd/CD-RW drive

    My old dvd - rom on my toshiba s1800-514 drive was broken, so I had to replace it. I used an old teac as a temporary replacement cd-rom drive. but now, I bought a new dvd/CD-RW-drive combo (toshiba sd-r2612). but the laptop does not seem to post, I get the "toshiba" screen (when it says press f12 to select boot device). but it stops there and does nothing. I can open the player, it seems to be connected ok.

    Why won't it work? (only the bios setting which applies is one that I can't change...). the drive is nine ar so small chance it's already broken.

    What should do?

    Hello

    A few weeks ago one of my friends also had a problem with his replacement new drive. He wanted to move the DVD/CD player to a DVD burner.

    The only thing he had to do was change the master/slave settings!

    Goodbye Chris

  • Name the new document

    As part of an AppleScript I develop, I create a new document, I want to give a specific name. So I tried:

    say application "Adobe Illustrator".

    do new document with Properties ¬

    {color space: RGB, name: myString}

    end of say

    However, the document still appears with the name "without title-1. Is it possible to give the document a name when you create? Or can only do you when recording?

    I need the same thing and found the answer using the DocumentPreset object.

    In JavaScript, I put the name of the new document in the options DocumentPreset and applied when I created the document. getPoints is simply a conversion from inches to points, btw.

    var docPreset = new DocumentPreset;
    docPreset.units = RulerUnits.Inches;
    docPreset.width = getPoints(13.0);
    docPreset.height = getPoints(18.0);
    docPreset.title = 'test document';
    docPreset.colorMode = DocumentColorSpace.CMYK;
    
    var doc = app.documents.addDocument(DocumentColorSpace.CMYK,docPreset);
    
  • Error in the driver for the new DVD player,

    The SATA DVD drive is nine, works of a system boot when I put in a windows install disc and do a start up cold, but drive does not work to complete startup. Got update driver and same driver deleted and reloaded, still does not work, contact manufacturer (Memorex) not much help from them other that telling them that this is a conflict of microsoft. Checked the settings of currency, system error Code 39 in the properties of the device such that the system does not recognize the reader cannot understand cela one, seems to be a software conflict but do not know if this is another driver or Vista conflict causing the error code. Flat, system does not recognize the drive. After running the driver update you get a msg saying the system thinks that the best driver is already installed.

    Hello

    Try the microsoft 'fix - it' for your problem below

    http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

    and read this information too

    http://support.Microsoft.com/kb/982116/en-us

  • Satellite 5200 - need master/slave patch for the new DVD player

    I need a patch for DVD to use in a Satellite 5200.

    My original DVD is broken, so I bought a Toshiba SD-C2512 DVD but it does not work inside the Satellite, but with adapter to my desktop PC.
    I patch the DVD in master.

    Where can I get the file and the prog for patch?

    Hello

    I think that these patches do you mean are not available and as far as I know if you can spend a notebook of the master to the slave, for example there is a jumper on the drive.

    However, to me it sounds like this drive is not compatible with this laptop. Not every disc is compatible with all laptop (g. pins assignment.) e  ;)

    You must buy a new one and check the user's manual. There you should find a list of compatible drives.

    Good bye

  • Workstation XW8000 with XP recognizes the new DVD player but will not read DVDs

    I just added a DVD player for my HP xw8000 workstation. It is being prepared to try installing Windows 7. Windows 7 Upgrade Advisor says that my machine calls brilliantly... all green. Also, because many new software products are released for MSDN on DVD, it is necessary for me to be able to use this DVD ROM.

    I installed the DVD drive is recognized by WinXP Pro with all the latest service packs. Shows up as drive E in Explorer, it appears as a CD ROM In Device Manager it is listed as E - IDE DVD - ROM DVD-8212. However this player will not read a DVD!  I tested the DVD media in another more recent machine and it reads very well in a same DVD ROM.

    Is there something wrong with the xw8000 it cannot read from a DVD ROM drive?

    Thanks for any help.

    Weird that you receive notifications by email of responses. Usually, this is the default setting. When you type a response, it is usaully a box that is checked to receive notifications by e-mail. (Top right)

    I agree, the DVD player seems to be defective. It should work with only Windows drivers. The only additional files that you need would be to play movie discs, etc.

    Are your jumpers on both drives positioned same_If the cd drive is jumper as master, the other slave as you. If the other player is cavalier CS (cable select) the dvd player must be linked, CS. I think most of the HP machines are CS. Try that to see if it solves. If this isn't the case, maybe time to try another drive.

  • drive DVD/cd that came with the computer failed. you want to install two new dvd/cd players.

    Pavilion p7-1054 pc, windows 7.  I installed a new dvd/cd drive (hp dvd1260i).  works perfectly.  you want to install a second drive of cd in expansion Bay.  I don't see sata cables extra or riders on the new dvd/cd drive (hp dvd1260i).

    a power cable.  everything works fine. thenk you very much.

  • BSOD when trying to install Win7 64 bit with the new motherboard

    Hi all

    I have the following BSOD problem:
    I installed a new motherboard in my system (a MSI P43 C51). Before that, I got a Gigabyte G41MT-S2P. The rest of the configuration is: Q9650, Thermaltake truespirit 90 cooler, 2 x 4 GB DDR3 1333, GTX 470, 750W PSU, case name, SATA HDD 500 GB, Windows 7 64 bit.

    Well, the problem started when I tried to boot into windows with the new motherboard: I got BSOD 1 second after windows starts loading. I thought... new motherboard, install new windows, so I tried to install windows 7 64 bit DVD and USB stick, I get the STOP: 0x0000000A error during installation. I changed the HARD drive, thinking that it could be a bad sector problem, but no, the other hard drive behaved exactly the same thing. I got BSOD at 40% extraction, extraction of 90% and for the moment "Complete the installation..." ». I also tried to install with the stick of memory only one, spent between ports, everything. The material I have works, as I played on my PC every day in the last month and received no. BSOD, also had a small overclock the CPU and the GPU (100 MHz on the processor, that the old motherboard supported more than 343 fsb and about 100 MHz on the GPU). It was stable, no errors, no nothing.

    My thoughts are only, after asking some knowledge that work in computer support, it could be a problem of version of the BIOS (BIOS is 2005..) and the fact that my Win 7 installation kit is without Service Pack 1 (a colleague told me that he had this problem for the PC more than once and after trying to install SP1 It went smoothly and without errors)

    I just got a new "blank" DVD of Win 7 64 bit with SP1. What I'll try today is to Flash the bios with the latest version and install the OS on a HARD drive new, sealed. He could not be my system components, because they are compatible and they worked 1 day before with no problems! I have literally NO IDEA what could be the problem. Today, I'll try the installation of the new DVD and with the new version of the BIOS. If this does not work, I have no idea what I can do... It is a sucky situation.

    If you have any suggestions, please, don't keep it to yourself :-D

    Thank you!
    Alex

    Hello

    See this thread for more information on using BlueScreenView, MyEventViewer and other methods of
    Troubleshoot the BlueScreens - top two responses.

    http://social.answers.Microsoft.com/forums/en-us/w7repair/thread/8df6485a-50cc-4cdc-BE3E-0f05c7745117

    ==============================================

    References to Vista also apply to Windows 7.

    Drivers could be at fault, however the problems of disk or security/antivirus/antispyware products are
    just as likely to be the root cause that they can force a driver to corrupt or go out of bounds.
    The video driver or something affecting it would be questionable.

    At the end of this message, I'll post a bluescreen generic and in the next convenience store
    How do to update the drivers and BIOS but also to check memory message.

    -----------------------------------

    BCCode: 0a 0x0000000A

    Cause

    This bug check is issued if the memory paged (or invalid) is accessible when the IRQL is too high.

    The error that usually generates this bug check occurs after the installation of the faulty device driver or service system, BIOS.

    If you encounter a bug 0xA control during the upgrade to a later version of Windows, this error can be caused by a device driver, system service, an anti-virus or a backup tool that is not compatible with the new version.

    Solve the problem

    If a kernel debugger is available, get a stack trace.

    To resolve an error caused by the faulty device driver or service system, BIOS

    1. Restart your computer.
    2. Press F8 to character-based menu that displays the choice of operating system.
    3. In the WindowsAdvanced Options menu, select last known good Configuration . This option is most effective when a pilot or a service is added at a time.

    To resolve an error caused by an incompatible device driver, system service, virus scanner, or backup tool

    1. Check the system log in Event Viewer for error messages that may identify the device or driver that caused the error.
    2. Try disabling the cache in memory of the BIOS.
    3. Run the diagnostics of equipment provided by the manufacturer of the system, in particular the scanner memory. For more information about these procedures, see the manual of your computer.
    4. Make sure that the latest Service Pack is installed.
    5. If your system has cards (SCSI) small computer system interface, contact the card manufacturer for updated Windows drivers. Try to disable sync negotiation in the SCSI BIOS, check the wiring and the SCSI ID of each device and confirming the proper termination.
    6. For devices (IDE) peripheral electronic integrated, set the built-in as only primary IDE port. Also, check each IDE device to the right setting master/slave/stand alone. Try to remove all IDE devices except for the hard drives.

    If the message appears during installation of Windows, make sure that the computer and installed devices are listed in the list of the products tested Microsoft Windows market.

    Comments

    Before upgrading to a new version of Windows, remove all third-party device drivers and system services and disable any antivirus. Contact software manufacturers for updates of these third-party tools.

    BCCode: 0a 0x0000000A<-- read="">
    * 1025.html http://www.faultwire.com/solutions-fatal_error/IRQL-not-less-or-Equal-0x0000000A-

    ==================================================================

    General troubleshooting BlueScreen to use with the methods above.

    Look in the Event Viewer to see if something is reported on those.
    http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

    MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
    TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.

    http://www.NirSoft.NET/utils/my_event_viewer.html

    -------------------------------------------------------------------------

    Also this, so you can see the probable bluescreens.

    Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
    http://www.winvistatips.com/disable-automatic-restart-T84.html

    -------------------------------------------------------------------------

    Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
    info that would help. Such as ITC and 4 others entered at the bottom left. And all others
    error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

    As examples:

    BCCode: 116
    BCP1: 87BC9510
    BCP2: 8C013D80
    BCP3: 00000000
    BCP4: 00000002

    or in this format:

    Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
    Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

    It is an excellent tool for displaying the blue screen error information

    BlueScreenView scans all your minidump files created during 'blue screen of death '.
    hangs and displays information about all accidents of a table - free

    http://www.NirSoft.NET/utils/blue_screen_view.html

    BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
    There are other causes.

    You can do mode if necessary safe or the Vista DVD command prompt or
    Options recovery if your system is installed by the manufacturer.

    How to start on the System Recovery Options in Windows 7
    http://www.SevenForums.com/tutorials/668-system-recovery-options.html

    You can try a system restore to a point before the problem started when one exists.

    How to do a system restore in Windows 7
    http://www.SevenForums.com/tutorials/700-system-restore.html

    -------------------------------------------------------------------------

    Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to fix the system files of Windows 7 with the System File Checker
    http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates cbs.log Windows Vista (and Windows 7)
    http://support.Microsoft.com/kb/928228

    The log can give you the answer if there is a corrupted driver. (Says not all possible
    driver problems).

    Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

    How to run the check disk at startup in Windows 7
    http://www.SevenForums.com/tutorials/433-disk-check.html

    -------------------------------------------------------------------------

    Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
    keyboard and mouse, as well as of other major device drivers.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    Installation and update of drivers to 7 (update drivers manually using the methods above is preferred
    to make sure that the latest drivers from the manufacturer of system and device manufacturers are located)
    http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

    How to disable automatic driver Installation in Windows Vista - drivers
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

    -------------------------------------------------------------------------

    How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
    quit unexpectedly
    http://support.Microsoft.com/kb/958233

    Troubleshooting Vista Blue Screen, error of JUDGMENT (and Windows 7)
    http://www.chicagotech.NET/Vista/vistabluescreen.htm

    Understanding and decoding BSOD (blue screen of death) Messages
    http://www.Taranfx.com/blog/?p=692

    Windows - troubleshooting blue screen errors
    http://KB.wisc.edu/page.php?id=7033

    -------------------------------------------------------------------------

    In some cases, it may be necessary.

    Startup Options recovery or Windows 7 disk repair

    How to run a startup repair in Windows 7
    http://www.SevenForums.com/tutorials/681-startup-repair.html

    How to start on the System Recovery Options in Windows 7
    http://www.SevenForums.com/tutorials/668-system-recovery-options.html

    How to create a Windows 7 system repair disc
    http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

    I hope this helps.

  • New DVD - RW double layer burner on Satellite 2450-S203 (IDE 1 # ERROR)

    Hi all

    I have a toshiba 2450 S203.
    For this laptop, I bought a new writer NEC ND-6650 double layer DVD.
    I took out the orginal, unscrewed the chassis power off and place it on the new. Insert the new DVD burner in my computer, the led starts too burn. Insert a cd in there and nothing happened. Looked in my computer and the DVD player was not shown. Restart my computer and I got an erro: IDE 1 # ERROR. Can someone help me with this problem.

    Thanks in advance,

    Daniel

    Hello Niko

    Is it possible to make it work properly? My Tecra M1 has a CD burner. I wish I had a DVD burner inside.

    Thank you.

  • Impossible to do a series of recovery for the new cell G6-1369 disk.

    Have tried to make a game of the drive on the new DVD recovery and also a new stick of memory of 32 GB. It goes through the process-Prepared disk-copy the image - then gets halfway through checking disc and stops with the following message. (That we know of errors in the creation of recovery media please try again) Have tried now four times that takes absolutely ages but still get the same message. Ideas please!

    Hello

    I would call HP (the telephone number can be found on the corresponding link below) and explain that the Recovery Media Creator is unable to create a viable set of recovery disks and ask them to send you a set of free replacement.

    If you live in the United States, contact HP here.

    If you are in another part of the world, begin here.

    Kind regards

    DP - K

  • Windows DVD Maker will not play on the TV DVD player

    I have Windows Vista, and Windows Movie Maker to make a movie. I've published using Windows DVD Maker. I've made several copies and sent to various members of my family. While I was able to watch them when I tested them on my TV dvd player, none of my family members are able to watch their copies on their dvd players. In addition, when I insert the dvd in my computer's dvd player, it won't play either. How can I fix?

    Thank you. What I did just check "ffdshow" configuration and found that the codec for mp2 was disabled, so I let him. Now when I load the dvd into my computer it starts automatically.

    Now, my question is that I have to burn the new dvd for my family, so they can watch on their dvd player TV? Are their other codecs apart from that I have activated that must be adjusted so that DVDs can be found on other dvd players?

    ======================================
    You didn't say if you have a folder VIDEO_TS on the DVD...

    OK... you say you can play DVDs on your freestanding
    DVD player and on your computer. Startups that appears
    DVDs are fine and the problems of members of your family
    need to be cleared up on their end.

    One thing I would try would be to publish the project as a
    .wmv movie file in a folder on my hard drive. Then I'd
    the following freeware to create a video DVD. There are
    a small chance that it would work better for you.

    (FWIW) It's always a good idea to create a system
    Restore point before installing software or updates)

    DVD Flick
    http://www.dvdflick.NET/

    Be sure to read the Guide:
    http://www.dvdflick.NET/Guide.php

    If you have problems to download DVD Flick...
    Try the following direct link:
    http://tinyurl.com/yzx9sck
    or...
    http://downloads.sourceforge.NET/project/dvdflick/dvdflick/DVD%20Flick%201.3.0.7/dvdflick_setup_1.3.0.7.exe?use_mirror=SoftLayer

    Save the file to a folder on your hard drive and
    install from there.

    Tutorials:

    Tutorial DVD Flick
    http://beginwithsoftware.com/videoguides/DVD-flick-Guide.html

    Burn any Format video DVD PC
    http://www.freevideoworkshop.com/dvdflicktutorial.htm

    To create a video DVD base that should play in a free
    permanent drive DVD... try the following...

    First... read the DVD Flick Guide to familiarize
    with the program.

    Open DVD Flick and insert a blank DVD in your drive.

    If the window of Autorun from your computer... just close it.

    Click the project settings button and check... Video /.
    Target format... residents United States... Choose... NTSC /.
    Accept.

    The title button left click Add and navigate to your
    Video clips and select the ones you want on the DVD.

    You can have by selecting one and then use
    the up and down buttons.

    Left click on the button create DVD / OK / Yes / Yes.

    Please wait while the DVD is created.

    When the text "Completed successfully" is displayed you
    DVD Flick can close. Now you can eject your DVD
    and play in your DVD player.

    At some point you might want to buy more
    Advanced Cyberlink, Nero, Roxio, software
    Ulead, etc... but at least it is a start.

    Good luck. John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

  • During the migration of projects opening in PICTURES project names will appear on the News Photos 'albums '?

    Prepare my Aperture library (with deep levels of files/projects/albums) to migrate to pictures.  I want to know if the NAMES of my files/projects/albums will be kept in Photos and will appear in the new view of photo albums.

    Using Aperture 3.6 and pictures is up to date. 10.11.6 OSX

    Yes, they migrate. To more easily confirm everything is fine select see the sidebar on the view menu. Also, your current Aperture library will remain unchanged during the migration, if youre not really take risks by trying.

  • I changed the my imac with a new drive and I lost the original CD/DVD which came with the new Mac.

    I changed the my imac with a new drive and I lost the original CD/DVD which came with the new Mac.

    and when I go to install the mac lion antiracism apple with reticle logo means error

    what can I do with these

    Please help money

    You can get the replacement system install & Restore CD/DVD of the customer support of Apple - to the United States, (800) 767-2775-for a sum low S & h. you will need to have the model or the serial number of your Mac available.

    If you are not in the United States, you may need to go through the regional Apple Store that serves your location to find the phone number. Here is a list of links to all - http://store.apple.com/Catalog/US/Images/intlstoreroutingpage.html , another resource: International Support Phone #s.

Maybe you are looking for