NAT 0 to inside and outside of translations in ASA5520

Similar Questions

• Browse catalyst prepared - export between inside and outside as in the catalyst?

  Hello world

  Dear people of Sony, is possible to add a feature to export / trasncoding files between In and Out marks only as in catalyst go? Was surprised not to find, very handy when there is a large file that has two or more WB settings required, to export part of the file with the parameters a, marking the section with inside and outside and then adjusting those yet to export the or other parts of the shooting with an another WB settings?

  I know there is a feature to copy sections of the files ' between inside and outside "only but it would have been more convenient to have it as in catalyst browse my humble OPINION."

  Or is there a simpler workflow that I'm missing out on?

  See you soon

  Max

  P.S. Thanks to solve the strange Maj WB problem that I reported earlier, Travis and team, I have since reinstalled catalyst prepare 2015 and in awe of the capabilities of the software. Great job.

  Hi maximdryginsony:

  Thanks for the question.

  I think the function of catalyst to prepare that can solve your problem is a subset of creation. What you can do is put an In/Out point with a WB setting, and then click Log. Create a subclip (see screenshot). This will create a subelement with the color settings.

  

  -Travis

• Inside and outside firewalls blackBerry smartphones

  can someone help me how to fix my firewall activate with a small yellow lock, when I download an application, I get a message that the application has attempted to open a location inside and outside of the firewall allowing in my IT strategy.

  Hello and welcome to the community!

  Only the creator of the it policy which is located on your BB may change this policy to allow what you want. If you're on BES, then you must speak to your BES admins... but be careful because COMPUTER on BBs strategies generally to support the policies and procedures of the organization that is associated with the BB (for example, your employer).

  If you are not on BES, then it seems that there is a latent policy on your BB that blocks what you want. You can remove the it policy, but this is a delicate procedure.

  Let us know if you are or are not on BES, and if you are not we can provide you the procedure to follow for the cleaning of your BB of the latent IT policy.

  Good luck!

• Change the path inside and outside areas in the vector mask

  Hey all lovers of the PS/CS,.

  This is probably an easy, yet, being pretty new to this, I have to ask.

  I have so this vector mask on a layer, and singing along to the Beatles I'm changing tracks on this subject. Well, what it is is a rectangle to crop a photo, nothing crazy. This rectangle is too big for my taste - so I just draw another, smaller on the inside and plan on deleting one.

  But! The second, smaller rectangle is considered to be a delicacy to take away the first (so its interior is considered to be 'black' mask-wise, that is cut out, and its outer part is 'white', which is kept in). Thus, when you remove that first, largest, the entire image will appear, except for the part that I want in the Middle, which is cut! Yes - it's the opposite of what I want.

  Now, I tried to use the path selection tool and change the fill color of the rectangle, but you can not... So, how you reverse both inside and outside of a closed path? Thanks in advance!

  Charles

  So, how you reverse both inside and outside of a closed path?

  Select the path with the tool Selection of track and in the Options bar change the path of the operations.

  

• ASA Version 9.0 (1) - Ping works both inside and outside, WWW does not work for remote VPN

  I am at a loss, I can connect VIA VPN and Ping inside the IPs (192.168.1.2) and outside (4.2.2.2) IPs of the remote VPN client, but can't surf WWW. Inside the network, all users have WWW access and the network is fine. I'm new on the revisions to ver 8.3 and don't see what I'm missing?

  Info:

  ASA-A # sh xl
  in use, the most used 12 4
  Flags: D - DNS, e - extended, I - identity, i - dynamics, r - portmap,
  s - static, T - twice, N - net-to-net
  NAT inside:192.168.1.0/24 to outside:24.180.x.x/24
  flags s idle 0:10:46 timeout 0:00:00
  NAT outside:192.168.2.0/24 to outside:24.180.x./24
  flags s idle 0:00:59 timeout 0:00:00
  NAT inside:192.168.1.0/24 to any:192.168.1.0/24
  sitting inactive flags 0:11:51 timeout 0:00:00
  NAT any:192.168.2.0/24 to inside:192.168.2.0/24
  sitting inactive flags 0:11:51 timeout 0:00:00
  ASA-A #.

  ASA-A # sh nat
  Manual NAT policies (Section 1)
  1 (inside) to destination of (all) Inside_Net Inside_Net the VPN-NET VPN static static
  translate_hits = 3, untranslate_hits = 3

  Auto NAT policies (Section 2)
  1 (inside) (outside) static source Inside_Net 24.180.x.x
  translate_hits = 3, untranslate_hits = 184
  2 (outdoor) (outdoor) static source VPN-net 24.180.x.x
  translate_hits 97, untranslate_hits = 91 =
  ASA-A #.

  Journal of the Sho:

  % 305013-5-ASA: rules asymmetrical NAT matched for flows forward and backward; Connection for udp src outside:192.168.2.10/137(LOCAL\User) dst outside:192.168.2.255/137 refused due to path failure reverse that of NAT
  % ASA-609002 7: duration of outside local host: 192.168.2.255 disassembly 0:00:00
  % ASA-609001 7: built outside local host: 192.168.2.255

  % 305013-5-ASA: rules asymmetrical NAT matched for flows forward and backward; Connection for udp src outside:192.168.2.10/137(LOCAL\User) dst outside:192.168.2.255/137 refused due to path failure reverse that of NAT
  % ASA-609002 7: duration of outside local host: 192.168.2.255 disassembly 0:00:00

  Current config:

  ASA Version 9.0 (1)
  !
  ASA-A host name
  domain a.local
  enable the encrypted password xxxxx
  XXXXX encrypted passwd
  names of
  IP local pool vpnpool 192.168.2.10 - 192.168.2.20
  !
  interface Ethernet0/0
  Inet connection description
  switchport access vlan 2
  !
  interface Ethernet0/1
  LAN connection description
  switchport access vlan 3
  !
  interface Ethernet0/2
  switchport access vlan 3
  !
  interface Ethernet0/3
  switchport access vlan 3
  !
  interface Ethernet0/4
  switchport access vlan 3
  !
  interface Ethernet0/5
  switchport access vlan 3
  !
  interface Ethernet0/6
  switchport access vlan 3
  !
  interface Ethernet0/7
  switchport access vlan 3
  !
  interface Vlan1
  No nameif
  no level of security
  no ip address
  !
  interface Vlan2
  nameif outside
  security-level 0
  IP address 24.180.x.x 255.255.255.248
  !
  interface Vlan3
  nameif inside
  security-level 100
  IP 192.168.1.1 255.255.255.0
  !
  banner exec   ********************************************
  banner exec   *                                          *
  exec banner * ASA-A *.
  banner exec   *                                          *
  exec banner * CISCO ASA5505 *.
  banner exec   *                                          *
  exec banner * A Services Inc.              *
  exec banner * xxx in car Street N. *.
  exec banner * city, ST # *.
  banner exec   *                                          *
  banner exec   ********************************************
  exec banner ^
  passive FTP mode
  DNS server-group DefaultDNS
  domain a.local
  permit same-security-traffic intra-interface
  network obj_any object
  subnet 0.0.0.0 0.0.0.0
  network of the Inside_Net object
  subnet 192.168.1.0 255.255.255.0
  network of the VPN-net object
  Subnet 192.168.2.0 255.255.255.0
  access-list extended sheep permit ip 192.168.2.0 255.255.255.0 192.168.1.0 255.255.255.0
  allowed incoming access extended gre a whole list
  inbound udp allowed extended access list any host 24.180.x.x eq 1723
  list of allowed inbound tcp extended access any host 24.180.x.x eq pptp
  list of allowed inbound tcp extended access any host 24.180.x.x eq smtp
  list of allowed inbound tcp extended access any host 24.180.x.x eq www
  list of allowed inbound tcp extended access any host 24.180.x.x eq https
  list of allowed inbound tcp extended access any host 24.180.x.x eq 987
  inbound udp allowed extended access list any host 24.180.x.x eq 25
  inbound udp allowed extended access list any host 24.180.x.x eq 443
  inbound udp allowed extended access list any host 24.180.x.x eq www
  inbound udp allowed extended access list any host 24.180.x.x eq 987
  pager lines 24
  Enable logging
  debug logging in buffered memory
  asdm of logging of information
  Outside 1500 MTU
  Within 1500 MTU
  ICMP unreachable rate-limit 1 burst-size 1
  ICMP allow all outside
  ICMP allow any inside
  don't allow no asdm history
  ARP timeout 14400
  no permit-nonconnected arp
  public static Inside_Net Inside_Net destination NAT (inside, all) static source VPN-NET VPN
  !
  network of the Inside_Net object
  NAT static 24.180.x.x (indoor, outdoor)
  network of the VPN-net object
  24.180.x.x static NAT (outdoors, outdoor)
  Access-group interface incoming outside
  Route outside 0.0.0.0 0.0.0.0 24.180.x.x 1
  Timeout xlate 03:00
  Pat-xlate timeout 0:00:30
  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
  timeout tcp-proxy-reassembly 0:01:00
  Floating conn timeout 0:00:00
  dynamic-access-policy-registration DfltAccessPolicy
  identity of the user by default-domain LOCAL
  Enable http server
  No snmp server location
  No snmp Server contact
  Server enable SNMP traps snmp authentication linkup, linkdown warmstart of cold start
  Crypto ipsec transform-set ikev1 VPN remote esp-3des esp-md5-hmac
  Crypto ipsec ikev2 VPN ipsec-proposal-remotetest
  Protocol esp encryption aes - 256, aes - 192, aes, 3des and
  Esp integrity sha-1 protocol
  Crypto ipsec pmtu aging infinite - the security association
  Crypto-map dynamic dyn1 1jeu ikev1 transform-set remote VPN
  Crypto-map dynamic dyn1 1jeu reverse-road
  map VPN - map 1-isakmp ipsec crypto dynamic dyn1
  VPN-card interface card crypto outside
  Crypto ca trustpoint _SmartCallHome_ServerCA
  Configure CRL
  trustpool crypto ca policy
  Crypto ca certificate chain _SmartCallHome_ServerCA
  certificate ca 6ecc7aa5a7032009b8cebcf4e952d491
  308204 4 a0030201 d 308205ec 0202106e cc7aa5a7 032009b 8 cebcf4e9 52d 49130
  010105 05003081 09060355 04061302 55533117 ca310b30 0d 864886f7 0d06092a
  30150603 55040 has 13 0e566572 69536967 6e2c2049 6e632e31 1f301d06 0355040b
  13165665 72695369 676e2054 72757374 204e6574 776f726b 313 has 3038 06035504
  0b 133128 63292032 30303620 56657269 5369676e 2c20496e 632e202d 20466f72
  20617574 7a 656420 75736520 6f6e6c79 31453043 06035504 03133c 56 686f7269
  65726953 69676e20 436c 6173 73203320 5075626c 69632050 72696 72792043 61 d
  65727469 66696361 74696f6e 20417574 686f7269 7479202d 20473530 1e170d31
  30303230 38303030 3030305a 170d 3230 30323037 32333539 35395a 30 81b5310b
  30090603 55040613 02555331 17301506 0355040a 130e5665 72695369 676e2c20
  496e632e 311f301d 06035504 0b 131656 65726953 69676e20 54727573 74204e65
  74776f72 6b313b30 5465726d 20757365 20617420 73206f66 39060355 040b 1332
  68747470 7777772e 733a2f2f 76657269 7369676e 2e636f6d 2f727061 20286329
  302d 0603 55040313 26566572 69536967 61737320 33205365 6e20436c 3130312f
  63757265 20536572 76657220 20473330 82012230 0d06092a 864886f7 4341202d
  010101 05000382 010f0030 82010 0d has 02 b187841f 82010100 c20c45f5 bcab2597
  a7ada23e 9cbaf6c1 39b88bca c2ac56c6 e5bb658e 444f4dce 6fed094a d4af4e10
  9c688b2e 957b899b 13cae234 34c1f35b f3497b62 d188786c 83488174 0253f9bc
  7f432657 5833833b 330a17b0 d04e9124 ad867d64 12dc744a 34a11d0a ea961d0b
  15fca34b 3bce6388 d0f82d0c 948610ca b69a3dca eb379c00 48358629 5078e845
  1941 4ff595ec 7b98d4c4 71b350be 28b38fa0 b9539cf5 ca2c23a9 fd1406e8 63cd
  18b49ae8 3c6e81fd e4cd3536 b351d369 ec12ba56 6e6f9b57 c58b14e7 0ec79ced
  4a546ac9 4dc5bf11 b1ae1c67 81cb4455 33997f24 9b3f5345 7f861af3 3cfa6d7f
  81f5b84a d3f58537 1cb5a6d0 09e4187b 384efa0f 01 has 38201 02030100 df308201
  082b 0601 05050701 01042830 26302406 082 b 0601 db303406 05050730 01861868
  7474703a 2f2f6f63 73702e76 65726973 69676e2e 636f6d30 12060355 1 d 130101
  ff040830 02010030 70060355 b 200469 30673065 060, 6086 480186f8 1 d 060101ff
  45010717 03305630 2806082b 06010505 07020116 1 c 687474 70733a2f 2f777777
  2e766572 69736967 6e2e636f 6d2f6370 73302 has 06 082 b 0601 05050702 02301e1a
  1 c 687474 70733a2f 2f777777 2e766572 69736967 6e2e636f 6d2f7270 61303406
  03551d1f 042d302b 3029 has 027 a0258623 68747470 3a2f2f63 726c2e76 65726973
  69676e2e 636f6d2f 2d67352e 70636133 63726c 30 0e060355 1d0f0101 ff040403
  02010630 6d06082b 06010505 07010c 59305730 55160969 5da05b30 04 61305fa1
  6 d 616765 2f676966 3021301f 2b0e0302 30070605 1a04148f e5d31a86 ac8d8e6b
  c3cf806a d448182c 7b192e30 25162368 7474703a 2f2f6c6f 676f2e76 65726973
  69676e2e 636f6d2f 76736c6f 676f2e67 69663028 0603551d 11042130 1fa41d30
  1 b 311930 17060355 04031310 56657269 5369676e 4d504b49 2d322d36 301D 0603
  445 1653 44c1827e 1d20ab25 f40163d8 be79a530 1f060355 c 1604140d 551d0e04
  1 230418 30168014 7fd365a7 c2ddecbb f03009f3 4339fa02 af333133 300 d 0609 d
  2a 864886 05050003 82010100 0c8324ef ddc30cd9 589cfe36 b6eb8a80 f70d0101
  4bd1a3f7 9df3cc53 ef829ea3 a1e697c1 589d756c e01d1b4c fad1c12d 05c0ea6e
  b2227055 d9203340 3307c 265 83fa8f43 379bea0e 9a6c70ee f69c803b d937f47a
  99 c 71928 8705 404167d 1 273aeddc 866d 24f78526 a2bed877 7d494aca 6decd018
  481d22cd 0b0b8bbc f4b17bfd b499a8e9 762ae11a 2d876e74 d388dd1e 22c6df16
  b62b8214 0a945cf2 50ecafce ff62370d ad65d306 4153ed02 14c8b558 28a1ace0
  5becb37f 954afb03 c8ad26db e6667812 4ad99f42 fbe198e6 42839b8f 8f6724e8
  6119b5dd cdb50b26 058ec36e c4c875b8 46cfe218 065ea9ae a8819a47 16de0c28
  6c2527b9 deb78458 c61f381e a4c4cb66
  quit smoking
  Crypto ikev1 allow outside
  IKEv1 crypto policy 1
  preshared authentication
  3des encryption
  sha hash
  Group 2
  life 43200
  Telnet timeout 5
  SSH timeout 5
  Console timeout 0

  dhcpd outside auto_config
  !
  a basic threat threat detection
  Statistics-list of access threat detection
  no statistical threat detection tcp-interception
  user name UName encrypted password privilege 15 xxxxxxxxx
  type tunnel-group remote VPN remote access
  attributes global-tunnel-group VPN-remote controls
  address vpnpool pool
  tunnel-group, ipsec VPN-remote controls-attributes
  IKEv1 pre-shared-key *.
  !
  class-map inspection_default
  match default-inspection-traffic
  !
  !
  type of policy-card inspect dns preset_dns_map
  parameters
  maximum message length automatic of customer
  message-length maximum 512
  Policy-map global_policy
  class inspection_default
  inspect the preset_dns_map dns
  inspect the ftp
  inspect h323 h225
  inspect the h323 ras
  inspect the rsh
  inspect the rtsp
  inspect esmtp
  inspect sqlnet
  inspect the skinny
  inspect sunrpc
  inspect xdmcp
  inspect the sip
  inspect the netbios
  inspect the tftp
  Review the ip options
  inspect the icmp
  !
  global service-policy global_policy
  context of prompt hostname
  anonymous reporting remote call
  Cryptochecksum:43db9ab2d3427289fb9a0fdb22b551fa
  : end

  Hello

  Its propably because you do not have a DNS server configured for VPN users. Try this command:

   group-policy DfltGrpPolicy attributes dns-server value 8.8.8.8

• PIX-limit connections embrionic & total between INSIDE and OUTSIDE.

  It is medium possible and straight forward to limit the number of connections embrionic and total if a PIX from the outside to the inside by using the parms in the NAT and STATIC commands.

  This list is possible to limit the embrionic connections and total from one host to the PIX INSIDE make the connections to the outside?

  Follow these steps exactly the same way. Assume that the host inside is 10.1.1.1.

  Keep in mind that if you have the following:

  public static 50.50.50.50 (Interior, exterior) 10.1.1.1 netmask 255.255.255.255 1000 25

  Then, it creates a static for the inside host 10.1.1.1 and will limit connections to or FROM this host to 1000.

  If you do not want to chew a static (and an external address) for this inside the host, you can do something like the following:

  Global interface 20 (external)

  NAT (inside) 20 10.1.1.1 1000 25

  and outbound connections to this host will be PAT had the address of the external interface, but will be limited to 1000 connections or semi-open 25.

• PIX 515E (7.0.1) - problem with the VPN connection between inside and outside

  Hello

  I ve creates a VLAN on the pix.

  In this VLAN, users are allowed to connect only to the Internet. Everything is fine, but when trying to connect with his VPN Client to their company, it has problems... (Outside traffic flow, but no traffic came back.)

  Is the only solution for this problem to create a Pool of Nat with public ip addresses, one to one mapping, or is there another solution with a public IP address (NAT on PAT) possible for this problem?

  Thanks for your replies.

  D.

  The problem is that the esp is an IP Protocol, so PAT will not work in this scenario. When the return traffic returns to pix he doesn't know how to get to the inside host. The only way to do this is by adding a static nat (1 to 1 mapping) and create a rule to allow esp. Is what type of vpn client? Microsoft vpn? Cisco vpn? If cisco VPN, perhaps, they can use NAT - T on the vpn that overcomes the question PAT by encapsulating ipsec within UDP packets. You need to talk to the admin VPN and itself it allow.

  -kevin

• Access a chart xy both inside and outside of a loop

  Every morning.  Semi-new LabVIEWer here (five weeks fun).

  This one has left me speechless.

  I take data from up to three units GPIB, generating three sets of data current-voltage, and I'm working on a xy real-time graph.  Data in a table to two dimensions (n rows and six columns), and I select a few areas combo to display on x and there axes (maybe I would like V1 vesus I3 or I2 versus I2, or whatever.

  That the ILO works very well.

  The problem is, that it 'live' update (which, surprisingly, works well and quickly), I need to include the graph and the code used to parse the data inside the while loop ('while' n sets of data are taken) and it means that once the loop is completed, I can not access the graph or the code.  The best I can do is use property nodes to change things like auto scale.

  Rather than post my code, which, after five weeks, looks like a sick human kidney vascular system, I would ask if you experienced people have a general strategy in this type of case.

  I'm sure 90%, which is also the fact that I am struggling to find a way of keeping and using the data table filled outside the loop, that such dumping in a table.  In this case, I want a table for it, but shouldn't there be a way of storage of the table?  I come from a background of textual programming rather than based on objects, in case you had not guessed!

  Thank you!

  AndyI wrote:

  As I say, I think it's just my misunderstanding of the philosophy of LabVIEW, and there must be a very simple procedure to achieve this.  I would like to know what it is.

  Yes, as soon as the REAL case is over, the case of FALSE runs that feeds a table empty indicator on the outside. Also use a registry to shift to the outside while loop and initialize it to the outside with a table empty. At the end of the iteration, feed the updated table to the terminal of shift register to the right.

• Panel source of Play/Pause plays between inside and outside

  It is a behavior that has recently changed. I don't know what causes the change I do not remember change parameter. But let's say I put a + point in the source window, then put pause playback. If the playback head is outside of the in + area and I touched the game, playback does not start from the read head, but it is to the point and from there. It drives me crazy.

  Premiere Pro 10.4.0 (30) CC aka 2015.4

  Mac OSX 10.10.5

  If you have activated with points in the source monitor and exit loop, it will always start playing from the point in. Press CMD - L on MAC or CTRL-L on a PC to disable looping. You can also find the loop on your button bar button and turn it off.

• OSX for learning inside and outside.

  Dear Apple community,

  I hope this is the right place to post this.

  I would like to know where to find a good updated material (it may be books or videos) all about OS X like filesystem, terminal etc. I found a few books on Amazon, but most of them is like $ 50-70 and obsolete, can someone suggest something?

  Thank you!

  You can try to search for the iBook Store. e-books are usually less expensive that printed books, are easier to find and are more frequently updated.

  Bob LeVitus writes always of very comprehensive guides, but you really should check to what interests you. Also remember that you can download files ePub directly to third-party publishers, not just Apple.

• Take a virtual server inside and outside the reserved area of the different shots.

  Hello. A problem that my team often discovered for testing (QA) is that when we re-establish checkpoints that were taken while the virtual machine was still a part of a domain is that it still does not work properly and that he enjoys the confidence of the questions. As a result, we have been in practice out of the field before making a new nod and then by restoring the nod to the field it is necessary to the virtual machine.

  However, it takes time. 175468 KB that can help me, I found, but I want to assure you that I understand my options properly with him.

  https://support.Microsoft.com/en-us/KB/175468

  I think that method 1 as a work autour is my best choice that we will not / do not have access to domain controllers. I want to know is that if I use this method, how will I get around because of the virtual will be always sent a new password with the PDC after that I reload for each snapshot? If my environment has 5 align the shots that I need to perform this register around on, at the time wherever I touched the 2nd snap shot to make the change of the password that has been saved with the first snap is no longer valid with the PDC and I'm having the same problems as I do now. I understand that correctly? If so, how to do this? TIA.

  Most of my pictures are on Windows Server 2008 R2, but I have a few on Server 2012.

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)

  *

  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• Can you only score one inside and outside in the source window?

  A little embarrassed to ask this as long as I've been using the first, but I have never needed to do before.

  I pull up a clip in the source window, put in and out of the points, and then drag in the timeline.

  Now, if it's a long clip, and I want to take part, how to see new in and out points? It overrides what is already there? Yes, I know that I can test this on mine, but my question is, what do I do if I want to go back and refer to the 'old' in and out of the points? In addition, once they are changed, it changes what I had previously added to the timeline? (I think not because I guess that what I dragged to the timeline will be there, and not update that the new clips are in the source for the same clip window)

  I know there is an option to make a subclip. Is this the only option? If so, I would not even sure how to do this in a workflow. In other words, I should have been the subitem knowing first that I go back and shoot another section of the same sequence. In any case, hope that makes sense and that any idea is appreciated.

  daveAndrade wrote:

  . . . I want to take part, how to see new points and exit?

  You play the clip and the brand new points and exit.

  It overrides what is already there?

  Yes. A clip can have one in and one out point at any point in time.

  ... what should I do if I want to go back and refer to the 'old' in and out of the points?

  Use the button cancel or place markers where you placed your points - you can have as many markers on a clip that you want, or go to the head of the section of the clip you want to go back to who is it on your calendar, select and press the f key, which move the monitor Panel source to this point and add to points that correspond to the clip as it is on the timeline.

  ... once they are changed, it changes what I had previously added to the timeline?

  N °

  I know there is an option to make a subclip. Is this the only option?

  Subclips, using markers, other methods - there are different options depending on how you want to work.

  I wouldn't even be sure how to do this in a workflow. In other words, I should have been the subitem knowing first that I go back and shoot another section of the same sequence

  You can make a subelement at any time. But if you start with a pair of pliers long source you want to extract raw materials, you already know he's going to be multiple-point involved over time on the same element in source.

  MtD

• Need help with network inside and outside Transmittion script

  Hi, I have a problem in my script. I would get Vm net.received.average and net.transmitted.average. Somewhere, it displays the empty output for me, can I have a sample of script on obtaining transmittion of network for 7 days

  My script:

  $report = @ (get - Vm = $vms). where {$_.} PowerState - eq "Receptor"} $lastWeek = (get-date). AddDays(-7) foreach ($vm in $vms) {$vmNet = "" |} Select VmName, NetworkReceive, NetworkTransmit $statReceive is Get-Stat-entity ($vm) - start $lastWeek - finishing (Get-Date) - MaxSamples 1 - net.received.average stat. Group-object - property Instance $statTrans = Get-Stat-entity ($vm) - start $lastWeek - finishing (Get-Date) - MaxSamples 1 - net.transmitted.average stat. {Group-object - property Forum $vmNet.VmName = $vm.name $vmNet.NetworkReceive = "{0: F2}" f $statReceive.value $vmNet.NetworkTransmit = "{0: F2}" f $statTrans.value $report += $vmNet} $report | Select VmName, NetworkReceive, NetworkTransmit | Export-csv "c:\q33.csv".
  Thank you

  Both are related to the use of aggregation running on your vCenter

  Historical data interval 4 are grouped once a day, and on your vCenter this SQL task seems to be planned at 08:00.

  That is why the time stamp.

  Statistical data are aggregated to one historical interval to another.

  Since ask us the historical interval 4 (with the IntervalMins parameter), the aggregagtion to this historical interval is not yet made.

  This is why the last day 2 are not present in the report.

  You can play with the - Start and - finishing settings to have a period of 7 days which is at least two days yet at the time.

  $report = @()
  $metrics = "net.received.average","net.transmitted.average"
  $vms = Get-Vm | where {$_.PowerState -eq "PoweredOn"}
  $start = (get-date).AddDays(-7)
  $finish = $start.AddDays(7)
  
  Get-Stat -IntervalMins 1440 -Entity ($vms) -start $start -finish $finish -stat $metrics -Instance "" | `  Group-Object -Property Timestamp,EntityId | %{
      $vmNet = ""| Select VmName, Timestamp, NetworkReceive, NetworkTransmit
      $vmNet.VmName = $_.Group[0].Entity.Name
      $vmNet.Timestamp = $_.Group[0].Timestamp
      $vmNet.NetworkReceive = "{0:f2}" -f (($_.Group | where {$_.MetricId -eq "net.received.average"} | Measure-Object -Property Value -Sum).Sum)
      $vmNet.NetworkTransmit = "{0:f2}" -f (($_.Group | where {$_.MetricId -eq "net.transmitted.average"} | Measure-Object -Property Value -Sum).Sum)
      $report += $vmNet}
  $report | Export-csv "c:\q33.csv" -NoTypeInformation -UseCulture
  

• Audio randomly cut inside and outside reading

  I encountered this problem on all recent projects I've been working with a variety of audio types. My audio cuts in and out randomly to seemlingly while the video works fine. Sometimes, the audio will play fine for 15 seconds then stop, sometimes it stops and starts after 2 seconds approximately. I tried to adjust all my preferences, parameters, types audio and videos even types, but the problem always comes back. Spoke to a friend who is new to the creation and it is having the same problem. Considering moving back to FCP despite low interface.

  I'm currently editing Canon 5 d Mkii images in 1080 p, 29.97 FPS. I use none of the audio attached video clips - edition only in a separate piece of music m4a. My audio is 44100 Hz. I'm at 1/4 of quality video playback. I'm running a Mac Powerbook fully implemented to date with a 2.6GHz Intel Core i5 and 8 GB of RAM.

  Please help, almostly completely unable to change it. Thank you.

  Hi nsimmons,

  You could try to update for Premiere Pro CC (7.2.2). It solves this problem for some systems in the update.

  Thank you

  Kevin

• What is INSIDE and OUTSIDE in parameter of the procedure?

  Hello
  often IN, OUT and IN OUT are used with the parameter in the procedures and functions.
  This means pass by value, by reference, we did in programming c / c++?

  When you create a procedure or function, you can set parameters. There are three types of parameters that may be declared:

  1. - the parameter can be referenced by the procedure or function. The value of the parameter can not be overwritten by the procedure or function.
  2 - the parameter may not be referenced by the procedure or function, but the value of the parameter can be replaced by the procedure or function.
  3 AL '-the parameter can be referenced by the procedure or function and the value of the parameter can be replaced by the procedure or function.