Navigation/Bluetooth question.

Similar Questions

• C2Y65AV dv7 Bluetooth question WANT after the victory of 8.1 to Win 7 Downgrade

  My laptop is an ENVYdv7 C2Y65AV

  He came originally with Windows 8.0, and I later upgraded to 8.1.

  I never liked 8.0 or 8.1 so I "had" to Windows 7 Professional. I did my research, realizing that there may be questions. I downloaded the drivers, bought a new drive hard, etc..

  Everything went past better than expected and I'm happy with the "downgrade", except for 1 issue.

  1. I have difficulties to get my Bluetooth to connect completely to one of my devices (headset or headset).
  My WiFi works well, I think the Bluetooth 4.0 is part of the Intel Centrino WiFi card. When connecting to any Bluetooth device, it appears in the Bluetooth devices screen. It will discover and 'connect', but nothing happens when I try to use them. The sound always comes through the laptop speakers.

  I have the Intel Centrino Wireless N 2230 BNHMW came with the laptop. It worked fine with Windows 8.1. All my devices Bluetooth paired easily with the laptop when Windows 8.1 is running.

  I went to the Intel Web site, made sure my driver for the wireless card for Windows 7 is the most recent and correct version. They have a software utility that installs on your laptop, then search and download the last correct version.

  I downloaded all the drivers for this HP downgrade, driver and software help section () of the Internet site. What great resource is this site!

  Suggestions? Advice?
  I appreciate any help!

  Thank you
  James

  P. S.

  One interesting thing about Windows 8.1.

  When I installed Windows 7 Professional, I bought a new hard drive SSD just for that purpose. I had saved my hard drive took a shot with 8.1 Windows on it just in case this downgrade are successful.

  Just for grins, I added it as a second hard disk (later) in the case where I needed to get the missed files.

  When I restarted my laptop, I went into the Manager startup and selected my main drive with Windows 7. It started normally.

  Then the seconds after startup, a message pops up saying that I had to reboot for the changes to take effect. I don't remember making some, but thought that something was updated?

  So I did. I rebooted and Windows 8.1 supports and edit files on my hard drive SSD (disk win 7) which ultimately disabled the Windows 7 boot disk.
  Attempt to start the hard disk Windows 7 has frozen just after the start of Windows 7 screen.

  I pulled the plug on the rebooted Windows 8.1 to Windows 7 hard disk. Before I could however, he had to scan the hard disk for changes and correct. Then Windows 7 booted up normally.

  This Windows 8.1 is of course control. Can you say 'Hal' from the film '2001 A Space Odessay'

  Hello

  The 2230 Intel chip is crap. I suggest to get decent bth less Intel 6235 or 7260AC to get a connection. The 2230 provokes many questions it is better to get rid of and use a correct wifi card.

  See how to change the order of boot on Windows 8 laptops:

  http://superuser.com/questions/663733/Windows-Boot-Manager-and-two-hard-disks

• How to use a headset with Navigation Bluetooth?

  Is it possible to have the Navigation software provides guidance on a BlueTooth headset?  You can use it to the voice input?

  lsrothstein,

  Yes, it is possible to have streams of directions through the bluetooth device. Regarding entry voice (i.e.: speaking of destination for nav) which also works. The device must support the A2DP profile so that the flow through it. I have the Motorola H17txt ear pc. & the Blueant s4 speaker & they work great, w / either goole vz NAV or nav.

  Hope this helps, good luck,

  pcw67427

• navigation bar question elementary

  Hello! If I create a Web site in DW, what the navigation bar...? If I got 30 pages or more for example... what should I do to return to the navigation menu bar!  What is the best way to reproduce the navigation menu on every page of my Web site? Can u redirect me to some good tutorials or give me some instructions for this elementary question! Thks!

  Server-side includes work just fine for info repeated on each page:

  If your server has PHP: http://www.stevedawson.com/tutorials/php-includes.php

  If the server has ISS: How to include HTML in many Documents using SSI

  Or, if you do not want to go down the road of include and your site isn't supposed to be bigger than those 30 pages, look in templates Dreamweaver here:

  https://helpx.Adobe.com/Dreamweaver/topics.html

• Navigation button question

  OK, I'm moderator, and not much of a programmer.

  What I have is a button which acts like a music video. you fly over and he did some aninmation, roll-off and and the reversal of the animation. Here's the code.

  What I can't understand is when the button is clicked, I want the navigation to occur on the main timeline or root. My question is, what is the code that I have to place instead of the route command that will allow me to position the main timeline is a framework or an instance of movieclip? Thank you

  anim_mc. Stop();

  anim_mc.addEventListener (MouseEvent.MOUSE_OVER, onMouseOver);
  anim_mc.addEventListener (MouseEvent.MOUSE_OUT, onMouseOut);
  anim_mc.addEventListener (MouseEvent.CLICK, onClick);

  anim_mc.buttonMode = true;
  anim_mc.mouseChildren = false;

  function onClick(e:MouseEvent):void
  {
  trace ("Click");
  }

  function onMouseOver(e:MouseEvent):void
  {
  var mc:MovieClip = MovieClip (e.currentTarget);
  
  mc.removeEventListener (Event.ENTER_FRAME, rewind);
  
  MC. Play();
  mc.addEventListener (Event.ENTER_FRAME, advance);
  }

  function onMouseOut(e:MouseEvent):void
  {
  var mc:MovieClip = MovieClip (e.currentTarget);
  
  mc.removeEventListener (Event.ENTER_FRAME, advance);
  
  mc.prevFrame ();
  mc.addEventListener (Event.ENTER_FRAME, rewind);
  }

  function advance(e:Event):void
  {
  var mc:MovieClip = MovieClip (e.currentTarget);
  
  If (mc.currentFrame is mc.totalFrames)
  {
  MC. Stop();
  mc.removeEventListener (Event.ENTER_FRAME, advance);
  }
  }

  function rewind(e:Event):void
  {
  var mc:MovieClip = MovieClip (e.currentTarget);
  
  If (mc.currentFrame == 1)
  {
  MC. Stop();
  mc.removeEventListener (Event.ENTER_FRAME, rewind);
  }
  on the other
  {
  mc.prevFrame ();
  }
  }

  If this code is on the main timeline, use:

  anim_mc. Stop();

  anim_mc.addEventListener (MouseEvent.MOUSE_OVER, onMouseOver);
  anim_mc.addEventListener (MouseEvent.MOUSE_OUT, onMouseOut);
  anim_mc.addEventListener (MouseEvent.CLICK, onClick);

  anim_mc.buttonMode = true;
  anim_mc.mouseChildren = false;

  function onClick(e:MouseEvent):void
  {
  this.gotoAndPlay ("maintimelineframelabel");

  otherwise, as a last resort, you can always use: MovieClip (root) .gotoAndPlay ("maintimelineframelabel");

  }

  function onMouseOver(e:MouseEvent):void
  {
  var mc:MovieClip = MovieClip (e.currentTarget);

  mc.removeEventListener (Event.ENTER_FRAME, rewind);

  MC. Play();
  mc.addEventListener (Event.ENTER_FRAME, advance);
  }

  function onMouseOut(e:MouseEvent):void
  {
  var mc:MovieClip = MovieClip (e.currentTarget);

  mc.removeEventListener (Event.ENTER_FRAME, advance);

  mc.prevFrame ();
  mc.addEventListener (Event.ENTER_FRAME, rewind);
  }

  function advance(e:Event):void
  {
  var mc:MovieClip = MovieClip (e.currentTarget);

  If (mc.currentFrame is mc.totalFrames)
  {
  MC. Stop();
  mc.removeEventListener (Event.ENTER_FRAME, advance);
  }
  }

  function rewind(e:Event):void
  {
  var mc:MovieClip = MovieClip (e.currentTarget);

  If (mc.currentFrame == 1)
  {
  MC. Stop();
  mc.removeEventListener (Event.ENTER_FRAME, rewind);
  }
  on the other
  {
  mc.prevFrame ();
  }
  }

• Navigation on question slides

  Maybe I'm missing something. I have a set course to the point with three slides in question. The question slides are not sequenced one after the other, but rather, spaced all screens in the content. I have the question changed to move to the next slide on a correct answer. This happens when the correct answer is provided. The slide plays through the time allocated to it rather than move forward.

  I don't GET the navigation options available. They seem much too rigid. Can someone tell me a quiz in Captivate 4 which is online, so I can see how others have dealt with the navigation options in the quizzes?

  Thank you

  Larry

  Yes. Had the same problem. After clicking on send, the slide will go through the timing of the slide. Simply adjust timing of the slide 3 seconds or more and set it if it seems too short or too long.

• CSS IE problem and navigation bar question

  Hello
  
  I have 2 questions:
  
  Is there a way to make all the elements of a horizontal navigation bar the same size, no matter the size of the word? I think I can use a background image, but perhaps someoneknows otherwise...
  
  and the problem with IE is that im setting the style of bottom border of a thing as dotted and thin but looks like "BOLD" or something on IE and normal in firefox, anyone knows how to fix this?
  
  Thank you

  Yes - you are missing the float: left... 8)

  --
  Murray - ICQ 71997575
  Adobe Community Expert
  (If you * MUST * write me, don't don't LAUGH when you do!)
  ==================
  http://www.dreamweavermx-templates.com - template Triage!
  http://www.projectseven.com/go - DW FAQs, tutorials & resources
  http://www.dwfaq.com - DW FAQs, tutorials & resources
  http://www.macromedia.com/support/search/ - Macromedia (MM) Technotes
  ==================

  "mfv84" wrote in message
  News:ee1vtp$EUD$1@forums. Macromedia.com...
  > I solved the problem of IE by setting the width of the border to "1px" instead of
  > 'thin' and I tried the "display: block;" thing, but he ordered the
  > navigation bar vertically! Maybe I'm missing something...
  >
  >

• iOS 10.0.2 Bluetooth questions

  Looks like Bluetooth problems with iOS 10 are widespread.

  Here's the problem I have.  Don't know if anyone has a solution...

  I have

  1. the iPhone with iOS 10.0.2 6

  2 Apple Watch (original v1) with 3 OS Watch.

  When I get in my car and the iPhone 6 pairs with my car stereo Bluetooth, connect Bluetooth with my watch falls every time.  Is this just a bug that is possibly corrected?

  Hello

  This is a known bug: http://www.macrumors.com/2016/09/29/iphone-7-bmw-bluetooth-audio-issues/

  Wait for 10.1

• iPhone bluetooth questions

  My iPhone 6 does not display my colorlink Bose speakers, although he has done in the past.  I cut and restarted without change.  He said that actually it is connected to the iPhone, but the inside diameter of the speaker appears on the bluetooth screen.  That is what it is?

  Check the instructions for the Bose speaker and reset After the reset of the speaker, put discovery/torque mode and activate Bluetooth for the iPhone. See if it appears.

• Satellite C670-199 / C670D - Bluetooth Question

  Hello guys

  My apologies in advance if it's a question real daft, but it models have built-in BT? The label on the specific keyboard for this but having real difficultiy find evidence of it on the laptop (IE how to light etc.) and comments online suggest otherwise?

  Help, please!

  See you soon

  Matthew

  > My apologies in advance if it's a question real daft, but it models have built-in BT?

  No, * Satellite C670-199 * is not equipped with a BT module.
  He has been fitted with a Realtek Wlan card that is NOT the combo card. This means that only Wlan is available.

• iPad/Logitech bluetooth questions

  1. a week old iPad 2 Air (iOS 9.2) and Type of Logitech + cover/keyboard. Set up the iPad, Bluetooth Logitech keyboard and everything was fine. Connected to iTunes and right after... on the iPad, the password lock screen 6 modified (specifically choose temp unforgettable number)

  2. called Apple Support, asked to reset the settings, re - up everything, didn't work, second attempt to restore the settings of network, or lives / versa, then went to configure everything at again and still no luck.

  3. reviewing the Logitech support pages both Apple until my eyes started to bleed and 'nada '!

  4. last attempt with a "fork it attitude" and merely an attempt to connect keyboard JUST to iTunes (as suggested in support of Logitech) and still once, after which follows the steps still not able to link pad keys via Bluetooth. (although in total honesty, never had the time to fully explore iTunes due lack of interest for Windows 8).

  5. a lot of people on the comment for the Logitech support site is complaint of interference of the Wi - Fi just makes that and Support Tech at Logitech States that multiple Wi - Fi could cause this. Close all except iPad and keyboard and no change.

  6. I have two last thoughts, there is a tab that I've set wrong on iPad (doubt since reset) or possible interference with a Comcast Internet connection due to phone, pad, smart tv.

  7. final consideration: Comcast equipment has two network connections, although according to the tech that installed 9 months ago, said that very few things will work on it because it was something to future 'something' catch up.

  Anyone have any ideas?

  You've lost a little me to step "connect the keyboard to iTunes. How did you do that?

  Bluetooth is a thing of communication without wire, but at a different wavelength than wifi, so interference should not be a problem.

  What happens when you try to pair the keyboard and iPad? They see each other?

• Satellite A200 23W: XP-> Bluetooth question and mass storage controller

  Hello

  I have a satellite A200-23W and just installed Windows XP SP2 and the problem is:

  1. that i can't see the anyware bluetooth (I istalled the monitor bluetooth from the web site of the Union European toshiba)

  2. also, in Device Manager, I see that the mass storage controller needs new drivers but I can't find?

  Thank you

  Alex

  Hello

  With regard to the point;

  (1) the laptop supports BT certainly then have you installed Bluetooth driver too?
  BT monitor is a utility to control BT, but to use the BT, you need the BT stack!

  (2) this unit is probably the module of Robson former Turbo Memory.
  This material is only supported by Windows Vista.
  There is therefore no Windows XP driver.

  See you soon

• Alienware M14x R2 BlueTooth questions

  So, I was able to use before bluetooth, a Wiimote on the emulator dolphin. I had to restore my system due to a virus and then I used the resource DVD to reinstall all drivers, but Bluetooth drivers were a problem. Generic Bluetooth adapt Rev: A00 cannot be installed on my system because I receive this error "Please be sure that the wireless Intel(r) network adapter is correctly installed and enabled before installing." I activated the Bluetooth in the Bios and I activated in Radio Control Options. The only bluetooth software currently installed is Intel (r) PROSet/Wireless Software for Bluetooth (r) technology, and when you try to uninstall or repair this software I get this error "the removal of software you want to zone cannot continue.» To remove this software, please first be sure that the wireless Intel(r) adapter is installed correctly and enabled. "And finally when trying to install Dell Wireless Bluetooth 4.0 Module Rev:A00 380, the process works very well until he asks me to"Turn on Bluetooth using the wireless switch"of course, I have the witch enabled wireless but Bluetooth is not recognized. Several times when restart or start-up, tent windows also various components of Bluetooth, but all the facilities fail. I now accessible Bluetooth but when trying to pair I ever find a device. Any help will be greatly appreciated as I tried a resolution for over 3 months now.

  I think you mean 'Do', not 'done '.  This is perhaps why they are ignorant of your problem.

• Spry Navigation - CSS Question

  I recently added spry navigation on my site (http://www.faithbuilders.com) and changed the default CSS to match the site a little better. Everything works well enough, but I have a few things left to straighten.

  First of all, there is a gap between the right side of the drop-down list and the left side of the menu subcategory that pops out to the right. See the image below.

  Is there a specific part in the CSS that affects this gap?

  Second, given that the submenu appears on the right, it is hidden when the browser size is small enough to cover it. Is there a simple way to get out to the left OR right, depending on where there is room for it?

  Your help is greatly appreciated.

  ~ Sarah

  I'm giving It All wrote:

  I've recently added spry navigation on my site (http://www.faithbuilders.com) and changed the default CSS to match the site a little better. Everything works well enough, but I have a few things left to right.

  First of all, there is a gap between the right side of the drop-down list and the left side of the menu subcategory that pops out to the right. See the image below.

  Is there a specific part in the CSS that affects this gap?

  Yes change 95% to 200px in the css below rule: (as shown)

  / * Submenus should appear slightly overlapping to the right (95%) and upward (-5%) * /.
  UL. MenuBarHorizontal ul ul
  {
  position: absolute;
  margin:-5% 0 0 200px;
  }

  I'm giving It All wrote:

  Second, given that the submenu appears on the right, it is hidden when the browser size is small enough to cover it. Is there a simple way to get out to the left OR right, depending on where there is room for it?

  Your help is greatly appreciated.

  ~ Sarah

  Not that I know of.

• The navigation bar question

  Hello

  I'm going to build a website using Dreamweaver. I have built a navigation bar, but have used JPEG images for each button. Please see here -http://www.seemaidstone.co.uk

  What I really want to know is how to make a navigation bar like the blue on the Telegraph website (http://www.telegraph.co.uk) while Google can revisit the text and links.

  If any body could point me to a tutorial or simply explain how, it would be much appreciated!

  Thank you

  Mark

  MarkV84 wrote:

  IM using tables in dreamweaver, so just copy this code into the correct cell where goes my navigation bar?

  Thanks again

  Yes, simply insert the

  code in the table cell where you want the menu to appear and the css can be added to your css stylesheet.

  A word of warning if horizontal navigation build in this way are virtually a law unto themselves. If the end user is using a font setting expanded in their browser, it will destroy the look of the menu bar, because these links that do not fit in a single line will get pushed down to a second line. Ease of use is not altered, but the design is.

  If I ever cause to use a horizontal navigation bar ensure that links have enough space to grow, at least a couple of zooms browsers, which means that you can not links spanning the entire width of the design.

  I need links to span the entire width of the page, then I would most likely use images for buttons or investigate an elastic layout construction.