Navman my65t put appstartupsec.exe

Similar Questions

• Add the .exe file in labview 8.6 Installer

  Hi all

  I need to create an installation package for an application LV8.6.

  The problem is that the application needs a file external .exe. How can I add it to the installer?

  I put it in the same directory of the dll, but in specifications of generation /view/source files/project only DLLs are correctly displayed.

  Can I put the .exe manually in the package?

  Thank you

  You must add the file to the project. Did you do that?

• Data Execution Prevention ended at Half Life 2 (hl2.exe)

  I bought half-life 2 and install it on my new Vista pc. So I finished the installation, and I open up half-life 2. It takes a strangely long time to load, and the second it seems to finish loading, it closes, saying that he had a problem and hl2.exe had to be closed. In my taskbar, a small message will appear, indicating that the prevention of execution of data is completed half-life 2, click here for more details. So I clicked on the little bubble, and he showed a lot of things on the data execution prevention. And so I tried to disable it to hl2.exe and hl2_launch.exe, and then I restarted my computer. Once rebooted, my computer, I opened hl2.exe again. Same thing has happened, data execution prevention blocked hl2.exe. (And I'm sitting at my desk thinking, "Hold it.") Didn't I just put hl2.exe and hl2_launch.exe as exceptions in the data execution prevention? ") So I googled until I found another way to help." Then I went in cmd, it ran as administrator and copied and pasted the code from a help page - bcdedit.exe/set {current} nx AlwaysOff

  and you press on enter. I restarted my computer again. When it restarted, I opened half-life 2 and whadd' are knows, I HAD THE SAME PROBLEM. So what the hell is happening? Is it my computer? Or did Bill Gates? Help, please. It seems that I can't turn off DEP, and I can't add a program as an exception, even though my computer says I can. Oh yes, and I am the administrator, with all the privileges on my computer.

  Hello
   
  As you have already given an exception to this game and the problem persists, it must have some other programs interrupted during the launch of a game. Try to disable all non-Microsoft programs and then play the game to check its operation.
   
  1. follow step 1 to perform a clean boot to disable all non-Microsoft programs: http://support.microsoft.com/kb/929135
  2. restart the computer and launch the game to check its operation.
  3. If the game works fine, then follow step 2 to step 6 to find out what is causing the problem: http://support.microsoft.com/kb/929135
  4. follow step 7 to start the computer as usual.
   
  You can also check if the problem continues in a new user account.
  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile
   
  For more assistance, you can post your request here or contact the game manufacturer to find if there is a patch for this game: http://support.ea.com/
   
  I hope this helps.
   
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Explorer.exe does not start automatically

  HII,

  When I restart my laptop is wrong on the desktop whenever I need to run explorer.exe thru new task (from the Task Manager)
  I also put explorer.exe at startup option still i m facing the same issue.
  How to solve this problem?
  

  Hello

  Logon as administrator

  Regedit start - type in the search box - CONTROL top - right Click-RUN AS ADMIN

  Navigate to this key

  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon

  In the RIGHT PANE, double-click SHELL - value data and the entry should be explorer.exe.
  
  If you have ANY other information it please write and post here and of course change to the above

  Close Regedit and restart.

  Windows Vista explorer.exe does not start at startup
  http://www.WinVistaClub.com/T231.html

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Cannot open. Files EXE in Windows 7

  I recently updated my computer to IE 9 to 11 of the EI. When I try to download the drivers for my printer online, it does not open .exe files. Some .exe files can open, but there are some of them who cannot open. I tried to reset, but has not changed. Please help me as soon as POSSIBLE!

  Best regards

  Sherwin

  I already found the solution because some of the files are read as a .exe file when it downloaded programs including, but not limited to Google Chrome, QuickTime, Lenovo a recovery key, etc.. However, I hope this Lexmark S515 download reads not the .exe and I have to put a .exe at the end of the file to read in an .exe file because IE 11 it is not read correctly, but thank you to those who responded with solutions to this problem.

  Sherwin

• . Exe edition hosting with video content

  I created a project animated (on mac) who played by the FLVPlayback flv videos.

  I'm trying to make it as an .exe file that runs on windows (offline).

  When I make the file and put the .exe on windows works the interaction of the presentation and the images are there but the files FLV is empty.

  How can I tell the .exe where to extract the files in my directory? (I've linked the in the project but when I publish the link seems broken.)

  Any help would be much appreciated... It makes me crazy!

  Thank you in advance!

  use relative paths for your skin and flv.

  I come to start an air application, selected an installer of victory and the video played without problem in the exe file.

  

• Firefox 34.0.5 said plugin Adobe Flash is blocked, but the audit reports to update my plugin Flash (version 16.0.0.235) is underway. How to fix?

  About 1 month ago I have updated Flash and Firefox to newer versions. Firefox 34.0.5, running on Windows XP, SP3, displays Adobe Flash plugin in version 16.0.0.235, but it is now blocked again. No other versions of Flash are obvious. When I choose the screen Flash option to check the plugins are updated, Firefox reports the Flash plugin is up to date.
  This program's behavior is wrong and needs to be fixed. Review at Adobe, current Flash is 16.0.0.305.
  Who or what is broken here? Is Firefox broken and not properly related this newest version of the Flash plugin is available?
  I do not seem to previous versions of Flash installed on the system. This combo of the software was working properly for a while and then become broken, without path appropriate to allow users to resolve the issue. If Firefox is set to 'Block' a plugin, then it * MUST * be configured to easily and * CORRECTLY * allow this plugin to update. Using the latest software, my clicking on the function of "Check for updates" is reporting that Adobe Flash is the most recent version. Arrrrgh!
  I am now back to the "diagnose and repair broken Flash + Firefox" exercise that I just went thru.
  Best solution here would be to allow the user to easily override the mechanism of 'blocking' This could help users who use only access Flash video on trusted sites.
  If there is an obvious solution to this 'blocking' current Flash goofery, please inform. Otherwise, when I solve this problem, I'll post an answer to my own question here, stating what I did to solve this problem, because it seems to have an impact on other users Firefox + Flash, without a clear solution being posted.

  OK, fixed. You must manually update for Adobe Flash 16.0.0.305. Do this downloaded by the installation program Adobe Flash, for WIndows with plugin browsers. Closing Firefox, run the Adobe Flash Installer and restart Firefox, you should see the plugin Flash is now 16.0.0.305. I use Windows XP - SP3, on an old HP box. Seems to work ok now (video sites course streams without incurring of autoblocking). Inspection of network traffic shows smoother bandwidth also.

  Steps to follow:

  (1) download the latest version of the Flash plugin installed, for Windows with plugins, if you are using XP - SP3. Try to get the full 18 meg installer of Flash player.
  I followed a number of different links and eventually got to a page
  who has several options for different operating systems and versions
  the browser used. I chose Flash for Windows Setup with
  browsers that use plugins (as opposed to Windows IE/ActiveX).
  I can't find the exact URL that has the 16.0.0.305 plugin. I'll post
  the URL as a post follow-up, once I found where Adobe has it.

  The file you want is:
  'install_flash_player_16_plugin.exe '.

  Note, date 11 February 2015, the version I downloaded
  called 'install_flash_player_16_plugin.exe' is 18,129,584 bytes.

  I ran "md5sum" on it, and got:
  

  "1bca2e01063de6925c01b21abf9654d8" as the value of control.

  (2) Download this prgm (install_Flash_player_16_plugin.exe), and
  put it anywhere where you put the .exe files downloaded.

  (3) exit Firefox.

  (4) or use the "Run" box, or click a "cmd" to shell
  for a prompt C:\. Find the Setup program, and then run it. Should be
  update the contents of the directory:
  "C:\windows\system32\macromed\flash".

  (5) you can confirm that the content of this directory is updated.
  Check the content of the file "mms.cfg. It has two lines and controls
  If Flash updates will be automatically, or in the background.
  (I'm paranoid, and disable the auto update... Any program of automatic update
  is a perfect vector for insertion of viruses. Use this approach to your own
  risk.)

  (6) restart Firefox and confirm the Flash plugin is now worm 16.0.0.305.

  This should fix the autoblocking of Flash for the 16.0.0.235 plugin.
  -Rus

• Firefox 25-26 has been crashing on my laptop

  I have Windows 7 Pro x 64 running on a HP Pavilion.
  Since the 25th of Firefox, Firefox has been crashing up to and including 26.0

  He's going to break down, send a crash report, and if I choose to restart, it rises again and crashes in a minute.
  If I choose to quit smoking, once the crash report dialog box goes away and I restart it, it will crash again within a minute of the restart.

  Sometimes it will stay up, only to crash in itself perhaps after several hours or two.

  The last action I took was to uninstall and then reinstall Firefox 26. I did not carry over all data... no Favorites or addons and themes. Nothing. It was a vanilla installation. And Firefox crashed again after only a minute or two.

  I never had this problem with Firefox. The only active addons I've had were NoScript and iCloud, and as I said, the last installation did not include anything, and it still crashed.

  At this point, I went back to IE. I'll wait until 27 Firefox or something to try again, but someone else had
  This problem?

  Thanks for your comments.
  Tom

  Thanks for your replies Aman.

  I've marked this as resolved correctly; I selected the button on the email I received just to go back to the forum and my question.

  I think I found the cause in my situation.

  I had activated the iCloud addon sync with my new iPhone.
  Also, I put firefox.exe in Windows EMET.

  I disabled and deleted the iCloud addon, and I removed firefox.exe
  of EMET. Since then, Firefox has not planted.

  A test, I added the iCloud addon; Firefox has started planting immediately. I brought upward in safe mode, removed and the accidents stopped.

  Then I added firefox to EMET. Firefox started to plant again, so I removed of EMET.

  Since then, Firefox is still running.

  I know you asked for incident reports. I'll try to get these for you.
  But right now, those who seem to be the culprits.

  Thanks again for your help.

  Kind regards
  Tom

• Damaged BIOS 1 - Satellite Pro 6000 block

  Hi all

  I bought a laptop, a Satellite Pro 6000, but after a few weeks, he refused to start and gave me the bios message 1 damaged block.

  I downloaded the update to bios on the toshiba site, but it does not work.
  I have an external floppydisc. When I put the .exe to upgrade the bios on a floppy disk and turn on the laptop with the ~ button, I get the message "ready for the update of the bios, place the update disk and press any key when ready."
  I can hear the disk is searched, but nothing happened.

  How do I update the bios or is there something else wrong?
  Any help would be appreciated!

  In my opinion with the BIOS update you can't do anything wrong.
  If you BIOS, update by following the procedure described in the document FAQ Toshiba and the BIOS update can not be done properly, I'm afraid there is a problem with the BIOS chip and it may be defective.

  I can't say for sure, but if the BIOS chip is damaged, then you have a big problem.

• Support Toshiba ECO button configuration utility

  Hi, I need a small favor:

  In setting up the toshiba button, Eco button will appear in white, I try to put the *.exe manually, but does not work, in any case, I need the path to universal access to these buttons, like this:

  It\ program files\toshiba...etc

  Someone help me! Thnx!

  Can you please tell us what your problem is with ECO button? What you want to do exactly? To activate it or what?

• Satellite M40-145 needs more start after removing the BT to start

  Hello people,

  I am wrinting this post because I think that this version of Bluetooth stack probably has an incompatibility with my toshiba m40 - 145 PSM40E - Windows Xp

  I always remove the Bluetooth Managment (TosBtMng.exe) windows Startup, and now if I do that, I have problems when I'm back from sleep mode. Sometimes, I need to wait more than a minute or two to access the windows. While wainting my monitor stays off and my hard drive is flashing.

  Because I still put TosBtMng.exe to start windows my recovery is ok...

  Do you think this is normal?

  Hey nokai

  Toshiba Bluetooth site and you'll find piles of BT to download
  http://APS.toshiba-tro.de/Bluetooth/

• IdeaPad P500 settles not (none) Windows 7 drivers

  Hello

  I just updated my ideapad p500 to an SSD and installed windows 7. I got the installation to work, from bios to legacy and can boot into windows, but I can't install the drivers. I am trying to install all the drivers are direct on the Lenovo site listed under Windows 7 for the P500.

  I can't install the drivers, except maybe the ones chipset.

  When I run a pilot, he often proclaims "the following file is already on your computer" even if this is a new installation, and when I navigate to the location it says (C:\Drivers) will not be that whatever it be listed until I click on it.

  Ethernet runes that via claims then 'FichierFichier failed '. Then new Version of the unknown driver in a second box that opens.

  When I try to install the mouse driver (touchpad), I get a message saying "access denied" and that it does not support this touchpad.

  I also have the same as most of the other video card driver (minimum brightness all the time, can not change it) issue except that I don't have a previous version of the driver to return to. Where can I get a working version?

  Many riders will get a windows message saying "could not have installed correctly", but a new attempt does not work. I went to Device Manager and choose a specific folder for the driver (even just put a .exe in a single folder), but the device manager says that it cannot find the drivers.

  Now I'm hung up on a black background with a white logo of Lenovo starting for 5 minutes + (I have an SSD...). I would try a different HARD drive, but the process of switching them is miserable (remove the keyboard, optical drive and cover back together (which must be pried off) to swap a HARD drive?) Come on.

  How can I solve this problem? The computer worked fine with Windows8, but I want to run windows 7 on my SSD instead. There are drivers available, but none of them does not seem to work and I get the message "the following file is already on your computer" during the first installation. It has persisted through 2 format + fresh installs.

  I would be happy to provide you with any additional information.

  I used 7zip to unzip the driver files and everything worked. He saw in a post here, finally got my landline number.

• Access ni4882.dll with Qt and MinGW

  I have to control some electrical loads and power supplies by GPIB. We use Qt 4.7.4 with MinGW 4.4 (32-bit) on Windows 7 64 bit.

  The drivers package GPIB-NI-488. 2 package 3.0.2 for Windows 7 64 bit is installed. GPIB Troubleshooting Utility tool displays "pass" and the application of the Measurement & Automation can connect to it and talk to an intrument. So far so good.

  Now, I want to write an application can use the NI4882.dll (3.0.0.49153). Unfortunately, there are just objects for compilers files Microsoft and Borland and no lib file.

  Therefore, generate us a def of the ni4882.dll file with:

  pexports ni4882.h ni4882.dll h > ni4882.def

  -ni4882.def-

  LIBRARY NI4882.dll
  EXPORTS
  ? compareVersion@nGPIBAPI_NI4882@@YGXABVtSSVersion@@0AAJPBD@Z
  ? getCurrentVersion@nGPIBAPI_NI4882@@YG? AVtSSVersion@@AAJ@Z
  ? getOldestCompatibleVersion@nGPIBAPI_NI4882@@YG? AVtSSVersion@@AAJ@Z
  AllSpoll@12
  DevClear@8
  DevClearList@8
  ...

  --

  Then generate the lib with:

  dlltool k d ni4882.dll d ni4882.def-l libni4882.a

  Now, I build a small test QT program.

  -.pro file-

  INCLUDEPATH += $$ PWD/include

  LIBS += $$PWD/lib/libni4882.a

  --

  -.cpp file-

  #include "ni4882.h".

  ...

  Sub MainWindow::Init()

  {

  int DD = idev (0,3,0,T10s,1,0);

  If (Ibsta () & Err)

  {

  Err (tr ("Unable to open board:ibdev=%1").arg(dd)); "))

  }

  If (ibonl (0,0) & ERR)

  {

  Err (tr ("could not close the Council"));

  }

  }

  void MainWindow::Err (QString message)

  {

  Switch (Iberr ())

  {

  case 0:

  {

  message. Append ("(EDVR-erreur système)" ");

  } break;

  ...

  }

  qDebug ("Error: %s\nibsta = 0 x %x iberr = %d\n",)

  (unsigned int) Ibsta(), (int) Iberr ());

  }

  --

  The source code will be compiled and linked without error.

  But if I run, the output is:

  Error: Could not open the Board of Directors: ibdev = 32768 (EDVR - system error)

  ibsta = iberr 0x8000 = 0

  Error: Cannot close the Board of Directors (EDVR - system error)

  ibsta = iberr 0x8000 = 0

  So the question is: what is the problem? Why am I still getting this error EDVR. I also tried SendIFC (0) with the same result.

  With interactive control GPIB tool, I can communicate with my instrument and the Trace of e/s OR it connects. But I don't see the papers in my request tracking tool. Is this an indication?

  Any ideas?

  Marko

  Hi all,

  After a few questions about the use of the GPIB with Qt library, I wrote a description step by step to create objects for MinGW files:

  1 create a folder and copy the "gpib - 32.dll' of the"C:\Windows\System32"("C:\Windows\SysWOW64"in Win7) in this folder.

  2. copy "ni488.h" to "c:\Program Files (x 86) \National Instruments\Shared\ExternalCompilerSupport\C\include\. (Not ni4882.h!)

  3. load PExports (my version is 0.44) and put the exe in your folder. I don't have a URL to load this tool but should be easy to find. It is freeware.

  4. copy "c:\QtSDK\mingw\bin\" dlltool.exe in your folder.

  5. create a batch file '1 - build def file.bat' with the content: "pexports ni488.h gpib - 32.dll h > gpib.def.

  6. create a batch file "2 - build file.bat lib" with the content: "dlltool k d gpib - 32.dll - d gpib.def-l libgpib.a.

  7. run the batch file "1 - def file.bat build" to create the file 'gpib.def' def

  8. start the batch file "2 - build file.bat lib" to create the file in the library 'libgpib.a '.

  9 copy 'gpib - 32.dll' and 'libgpib.a' in your software project. I created the 'lib' subdirectory and copied the files to.

  10. copy "ni488.h" into your software project. I created the "include" subfolder and copied the file in.

  11. in your PRO file type:

  # #####################################################################
  # Include the NI 488 library. 2
  # #####################################################################
  INCLUDEPATH += $$ PWD/include
  HEADERS += include/ni488.h

  LIBS += $$PWD/lib/libgpib.a

  12. in your type of source code:

  #include "windows.h".
  #include "ni488.h".

  bool InitializeGPIBBoard)

  {

  bool isStarting = false;

  boardID int;        / * id board @brief. */
  QString boardName;  / * @brief Committee name. */
  int boardDescr;     / * descriptor of Council @brief. */

  Get ID Board
  SendIFC (boardID);

  If (ThreadIbsta() & ERR)
  {
  ErrorHandling (tr ("failed to open the Council"));

  Return isStarting;
  }

  Open and initialize a Board or a configured by the user device descriptor
  wchar_t * aName = new wchar_t [boardName.size () + 1];
  m_para.boardName.toWCharArray (Anom);
  aName [boardName.size ()] = 0;
  m_para.boardDescr = ibfind (Anom);
  delete [aName];

  The Board of Directors is the system controller.
  If (ibconfig (boardDescr, IbcSC, 1) & ERR)
  {
  ErrorHandling (tr ("failed to create the system controller board"));

  Return isStarting;
  }

  Affirm the clear interface.
  If (ibsic (boardDescr) & ERR)
  {
  ErrorHandling (tr ("Assert clear interface"));

  Return isStarting;
  }

  ASO.

  isStarted = true;

  return isStarted.

  }

  13 be happy! :-)

  I hope this helps. If you have any problems, please write me a message or post on this thread of Council.

  Gruss und viel Erfolg!
  Marko

• view lab versions

  Hello:

  A few days ago, I got this message:

  Hello:

  Im trying to find a way to perform a search, a file stored in different subfolders of a main folder, and copy, I mean I have a VI that makes every day a folder (the name istoday date or date of yesterday) and inside that folder is a serial1.txt log file, but yesterday (for axample), the same log (serial1.txt) file was generated , how can I do a laboratory research discovers all of these serial1.txt files? By simply putting in the search field, the name of the main file?

  And I want to copy each of these serial1.txt to different paths?

  So at this time, I ve work and the file is ready, but this archive search just like that: Directory directory main/2nd / 3rd/files in the directory... I mean if the files is deeper and more subdirectorys, does not works well for me.

  Im working in mode lab 8.5 but when I tried to put the .exe file in the computers where I get my files, sorprise! computers have the express 7 or somethig like that so I can't use my file. IT is possible change the version of my file to version 7?

  In the Project Explorer, click right-click build specifications and select new > Installer. After that, you should be able to follow the instructions in the online help.

• get the installation directory

  I'll be installing a program (program A) then executes an exe or separate lot (program B) at the end of the installation file to move the files if necessary. My question is, how do I get the path to the program after installation? Preparing a key to the registry the best option? The problem I see with it is that I know not how can I get the path program has to write the registry key, unless I put my application to run after install and write the value of the key in my application. But then I can't say to run after installation, program B. It seems to be somewhat of a catch 22.

  All the world needed to do something like this in the past, and how to solve? I could just copy files via the application an itself at startup, but let's say that I am motivated to do it from the Installer package file.

  ... Then put the exe file that you want to run after the installation on the computer anyway. It is installed in the same place as the program that I run. So I can use get the application directory to find the files since both executables are in the same place.