NB 300 button walk / stop

Similar Questions

• OfficeJet Pro 8620: HP OfficeJet Pro 8620 button walk / stop keep flashing

  Condition:

  My Officejet Pro 8620 is about 1 1/2 years and all of a sudden it does not. (FYI: it worked again yesterday). My printer has been connected to 3 PCs in my house wireless, there is another printer (HP LaserJet Pro M401dw) in the same room connected to wifi even. Printer is plugged directly into the outlet. No attempt to replace the cartridge or install the new firmware recently.

  Location:

  This morning, I saw the power button flashes, in an unusual way, it flickered at a rapid pace, about 3 - 4 times per second. When I try to print something, the printer has not been to see the in my list of printers, so I try to touch the screen of the printer, but nothing happened. When I pressed the power button, it stopped blinking, and the HP logo was shown on the screen with a blue bar underneath. Then it was stuck there for hours. Tried the hard reset, use the tools of the firmware, connect my printer to my pc using cable, but my printer is not displayed on my pc (it is not detected by the pc, no new feature and nothing appear in "Printers and devices" when the cable is connected to my PC).

  So I unplugged the printer from the power source and wait a few hours, then reconnect the printer to the socket. The printer has started again with the power button / stop light up and the screen showing the logo of HP with a blue bar below the logo. But this time, after a few minutes, the screen is off, all buttons blink (home, help, back, wireless & power button) at a rate (about 3 - 4 times per second) fast, and after a minute or two, home, help, "back" button and stop brighter wireless (only flashing light up), but the power button keeps blinking. All the buttons and the display do not respond, press the power button / stop is unable to turn off the printer.

  I tried all possible troubleshooting methods suggested on this forum, but nothing to solve it, I hope someone in this forum can help me with this, thanks in advance.

  Hi @DenieceNg,

  It seems that the problems are on the increase, and maybe this could be related to a hardware problem with the printer.

  Here is the document of support for the power problems - printer does not turn on.

  If these problems persist, I would contact HP Technical Support because they may have additional resources that could help lead to a solution. What you can do, is to use the following link to create yourself a file number, then call and it can help to expedite the appeal process:

  Step 1. Open the link: www.hp.com/contacthp/

  Step 2. Enter the product number or select Auto detection

  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.

  Step 4. Scroll down and click on: contact HP options - click Get phone number

  File number and phone number are displayed.

  If this helps you find a solution please click the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

  Thank you!

• HP Pavilion dv7 button walk / stop does not

  Hi, I recently had my Hp Pavilion dv7-1245dx Entertainment Notebook (to the best of my knowledge bc, I can't look it up in my product number) fixed some viruses and malware that caused random stops and freezes. My laptop worked fine after that the fix so I installed the latest updates to better protect my laptop but when I left and my laptop came into fashion 'sleep' it would not respond and the screen was black. I stopped using the power button and it turned back. The computer does not start and the flash caps lock button three times which means a problem of memory, according to HP support, that happened before I got my laptop fixed. Later, I unplugged the AC adapter and moved my laptop but when I tried to put it on the power button does not respond and I can't do anything with my laptop. Both recommended options for the issue of cap locks and the power button is to go inside my laptop and tinkering with the battery and the memory module. I'm very hesitant to do so for fear of further harm to my laptop. I am on Windows 7 and advice on what I should do would be greatly appreciated. (will give you more information if necessary)

  With respect,

  ACertainGuy

  Your notebokdoes have removable covers for the module of memory in the bottom of the laptop. It's just as shown in the document I linked.

  You will need to buy a Jewelers screwdriver set.  A jewellers Phillips scredriver is necessary.

  Here is a link to a documentthat explains the flashing LED error codes and what they mean.

  The only other option, if you do not have enough confidence to do it yourself, is to take your laptop in a shop that will do it for you.

  Best regards

  ERICO

• HP Pavilion g7-1167dx button walk / stop does not

  Hello. It's my first time using this Ant so sorry if I posted something wrong.

  My HP Pavilion 1167dx g7 stopped working an hour after that I turned it off. It has been used for about 3 hours and I did nothing to the internal hardware and the computer is not overheating (just, I was playing a game I've played for 6 months and it does not put any strain on the system). When I turned it off is no hitches at the close. When I returned an hour later to turn on the I pressed the power button and nothing comes up. No fan, no clicking or lights. Only the light on the AC adapter is on. The laptop is 4 years old. I tried a hard reset, nothing helps.

  Yes I wanted to exclude from a power supply dead because that is a solution easier and cheaper, but it seems power are the motherboard, but nothing happens on this subject. This means almost certainly of a motherboard failure.

• X 200 ban button walk / stop does not

  Recently the power button on the front of my ban can put is no longer the computer to hibernation.  It used to work and fact to wake a hibernation (or disable on a tour) to the machine that is just placed in the ban.  I think it stopped working for hibernation after that I installed a number of updates to the tool of Lenovo updates including a new BIOS and a Service Pack for Windows.  I don't want to go back and uninstall packages, and wa wondering if someone else sees this problem or if anyone knows a setting that got zero defect and must be changed. Thanks in advance.

  Fixed it by going to "chosen what to do power buttons", changing both "on battery" and "Plugged" of 'Put to sleep' to the 'status quo', save the changes, then change the two back to 'standby '.

• NB205 - white screen if I press the button walk / stop

  Hello

  I have problem with my NB205-325 bl, if I press on the power button then it will load the TOSHIBA logo and after, coming to screen empty and it does not start at startup. Everything was fine, if I used it the last time.
  OS: Windows 7 Ultimate

  What did I try?
  I gathered some information on this issue, and I found it helps sometimes if I remove the battery and remove the RAM. And if I was kidnapped ram, then I'll give you a few electritvy on this subject, but this did not help. (maybe I missed a part)? Also, I checked in my BIOS primary boot is my hard drive.

  My problem is same like in this video http://www.youtube.com/watch?v=LCm6BozBgAM&feature=related

  Anyone have any suggestions on this subject?

  Best regards, Olari

  Post edited by: Olari

  Hello

  Usually if laptop doesn't start and you get only a black screen, it seems to be a hardware malfunction

  First check out this article:
  [What steps must be followed if your Toshiba laptop does not start? | http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=21]

• Satellite P200 - disabling Internet special button Close button walk / stop

  I have a Satellite P200. Recently, the problem that my Internet push button itself so multiple Firefox Windows begin to appear at random intervals. Sometimes 2, sometimes it's 30. Needless to say, it's pretty boring.

  I found where I can customize the buttons and make the Internet button open a different program, but it doesn't seem to be an option to turn it off completely. If I "Unregister" the Internet button, then it goes back to the default function of opening a Web browser when it is pushed.

  Is it possible to completely disable these keys?

  Thank you!
  Jason

  Hello

  I have the same model of laptop and disabling option is not known to me. What you can try is to remove the utility of technical support of added value package button.

  In Control Panel, you will find option programs and features. Click to remove the VAP. Generally, it should ask you to change the installation and you can choose which part of this package can be deleted, if it is not completely remove the VAP.

  Download the last option in the download page of Toshiba, but when the facility starts choose custom installation and uncheck the box in front of the technical support of button utility.

  So for now I see it as the only possible solution.

• HP DV9700 not start. Farm in seconds after pressing the button walk / stop.

  My HP Pavilion DV9700, who works under Vista, stopped working yesterday.  I never did at the Windows startup screen.  Messages on-screen messages which function key to press for configuration, see starting, etc...   then stops.
  
  It started a day ago. I don't think that windows is the question.

  I tried to hard reboot... blew compressed air into the power supply area... no change.

  Don't know what to try next.

  Thanks in advance for any help you can provide.

  Steve

  Had to take the machine a tech I know.  It was the motherboard.   Thermal paste had disappeared from the excessive heat of the CPU and GPU and the poor ventilation of the machine design.   Costly, preventable and unnecessary repairs... HP was worth investing in better design systemboard for their laptops and notebook computers.

  HP response... your notebook $ 1200 of the scrap and buy another... and they will add the warranty one year.

  They thought that 5-6 years I got my laptop has a long service life of the device.

  I was actually insulted by this response and doubt my next laptop will be HP.

  Thanks to those who have tried to help however.

• How to configure X 220 to ignore button walk / stop and only start fingerprint reader?

  Hey all, sorry if this has been answered. If she was I didn't know.

  Is there a way to set the BIOS so that the bot via a shot successful fingerprint? This seems to be such a better way of doing things. I'm interested in safety, but only if interested i can drag a player instead of hitting a button; put a password every time and that's way too much effort for me. But when I slide a finger unregistered, the computer remains off. When I swipe a registered finger, it lights up. It's great. Now how can I do so I can ONLY turns on this way instead of simply by pressing the power button?

  In fact, I think I found a better solution. I really dislike windows passwords, I simply don't want to load an operating system of the computer.

  My problem, on set the 'Power On' password to the security in the BIOS and allows the reader of fingerprints be used instead, was that it does not work and I still need to type the password. It was because the Legacy mode has been set as the default boot priority. Change first UEFI mode allowed me to set a power password I could jump by turning on the machine by a swipe of the finger. Happen that I set. Even much more than "it's impossible".

• HP Officejet 4500 G510n-z all-in-one series, button walk / stop

  HP Officejet 4500 G510n-z series all-in-one wireless.

  When I press and release the power button, it does not start and no lights appear.

  If I press and hold the power button for about a minute, the printer turns on and works fine.

  To turn off the printer, I need to press the power button for about a minute.

  Hi @Tonyey20,

  Welcome to the Forums of HP Support! I see the power button on your HP Officejet 4500 is inadmissible, if you press and hold the button for one minute, the printer will turn on and work normally.

  I would like you to start troubleshooting here: The HP printer will not be running or to respond when the power button is pressed

  Please let me know the results. I'll watch for your reply.

  Thank you

• Compaq V6000 closing right after button walk / stop is pressed.

  The laptop turns on and turns off 2 seconds after you press the power button. Any ideas what is wrong. It was working fine the day before and the next morning is then when this started.

  Thank you very much for the information on this problem. It was really very useful.

• No amber light in the button walk / stop during sleep, now no blue light when Windows is running.

  The first took place several weeks after a mysterious ailment judgment then "standby mode". Last night, "closing Windows" hung for 10 minutes until that I forced the closure in holding the power button. Now, Windows loads and runs - but without the blue light in the power button.

  I would like to know why, how to fix it and - especially - if it's dangerous. I count on my computer for all of my business account.

  Any help will be greatly appreciated.

  Now, Windows loads and runs - but without the blue light in the power button.

  -> If Windows runs as it should then light is only an indicator of power. You're probably dealing with a faulty LED. Nothing to worry about.

  I count on my computer for all of my business account.

  -> It would be a case of all stored inside the computer records and no external backup? A big accident waiting to happen? If Yes, then this would be an ideal opportunity to review your backup strategy. How your business would suffer if you lost a value one day of data? Value of a week? The lot?

• I woke up this morning and my iPhone 6 does not light. I tried to reboot it by holding down the button market / stop and the button "home" but the apple logo never appeared and I had on the charger for a while and still nothing. Please leave suggestions!

  I woke up this morning and my iPhone 6 does not light. I tried to reboot it by holding down the button market / stop and the button "home" but the apple logo never appeared and I had on the charger for a while and still nothing. Please leave suggestions! Thank you

  You can make an appointment at the Apple Store - Genius Bar store and bring it into service. You can also search an Apple Store - find a store - Apple.

• A 200 - 3 small buttons by the power button has stopped working

  Win XP, SP2, 1 GB memory, nothing too special.

  These cute little buttons have stopped pulling up of software. The only function seems to work is that next to the switch lights up the machine!

  Any ideas?

  The only recent change is that I've recently updated Microsoft Office 2003.

  The buttons ARE set to launch software.

  Hello

  Well, I put t know why it doesn't work, but these 3 small buttons are controls of Toshiba.
  Have you tried to update the driver controls? You can find it on the Web from Toshiba site

  http://EU.computers.Toshiba-Europe.com and support & downloads.

  In addition, you can check the settings. I m not sure but I think you can find them in the Panel.

  Good bye

• Pavilion g6: button Wireless stopped working on laptop HP pavilion g6

  The wireless button has stopped working on my g6 pavilion. I read that some people have had this problem.
  
  Anyone would be kind enough to help out me.
  Thank you

  Try to connect your laptop to the LAN (wired connection) or try to install Recovery Manager

  http://support.HP.com/us-en/document/c01868333