NB100 - freezes on the BIOS screen

This laptop has got sick. It opens to a bios, select screen with F2 to Setup and F10 for Boot Manager, either selecting simply said he is selected and then wait. Can not go further.

I wand to remove the hard drive so I can retrieve the data but cannot penetrate inside the case. Anyone know how to remove the hard drive? It's a Toshiba NB100 (no optical drive).

Any help with be appreciated.

> wand to remove the hard drive so I can retrieve the data but cannot penetrate inside the case.

you don't need to remove the hard disk to retrieve the data, you can create a USB windows live for a start, then, and backup important data all

http://www.ANewMorning.com/2009/01/15/create-a-live-Windows-USB-stick/

Tags: Toshiba

Similar Questions

  • Computer laptop HP G72 freezes on the bios screen after installing a replacement battery.

    After you have installed a spare battery, my G72-259WM freezes on logo screen or bios of HP. If I tap to shut down the pc, unplug the unit and remove the battery. Then, re-insert battery the pc boots fine. When I stop still, I have to go through the same process. I tested the memory strips to be good and have replaced the HARD drive (the original had questions) to a WD Scorpio Blue 500 GB. Everything works fine once the pc is started. Is it due to being of a batterty of spare parts? or is there anything else that might be causing it?

    Its quite possible that battery is causing this issue since it has never occurred before the battery. Use this link to run a self test on the battery: test of a hard disk by using the Built in Self Test

    Let me know what results you get from the test.

    Thank you
    Sean

  • Mini 110 freezes to the bios for 5 min each time it starts

    Hello. I have a HP Compaq mini 110-1010ER notebook. Not so long ago, everything was fine.  Recently, it began freezing at startup, the display of the menu of the bios screen. After 5 min the screen initial sturtup black with the letter 'Q' and the choice of the bios menu, it starts without any error message and works normally. What could be?

    Solved! In the SD Reader slot, there was no card microSD card adapter. When I got out, the laptop began to load normally. A big thanks to MangKanor

  • Re: Satellite Pro A200 - black screen after the BIOS screen

    Hello
    I'm new to the forum and have a big problem. So, any help is welcome and appreciated.

    My Satellite Pro A200 turns black after the BIOS screen and a black screen with a blinking cursor. Also just as the screen goes black a beep can be heard which shows windows boot.
    I can access the toshiba Setup screen but not the installation of security mode.

    Kind regards

    Hello

    You wrote that you can access the BIOS, but have you checked if the HARD drive is recognized properly? Perhaps because the computer cannot start HDD isn't recognized then you should check this.

    If the HARD drive is recognized, I would try a Toshiba Recovery disk recovery facility. It seems that Windows isn't able to start and if you reinstall the whole system should help get rid me of this. Go to the start menu and select the CD/DVD drive as a boot device.

    Check this box!

  • Need to access the BIOS screens

    "HP Pavilion p7-1447 c desktop PC Win8x64.  FN2 gives me the diagnosis UEFI screens.  I need to enter the BIOS to set the NumLock on at all times.  How to access the BIOS screen?

    Hello

    Turn on and immediately press the ESC key to access the select start--> F10 menu to access the BIOS.

    Best regards

    ERICO

  • Microsoft Windows Vista Home Permium freezes to the logon screen or gets stuck

    Microsoft Windows Vista Home Permium freezes to the logon screen or crashes on the black screen with Copyright Microsoft Corporation with the load with six green bars moving through bar. It will start in safe mode. I ran the auto repair (recommended) when starting after being forced to stop. After it says its full it restarts and remains stuck on the black screen with Copyright Microsoft Corporation with the load bar with six green bars that cross so I force disable it again.

    I had no problem with this computer, he got in last seven. It was working fine yesterday and then the without wire came out, so I restarted the computer to find the connection again as I had done several times before. That's when it froze on the opening of session and password screen. Who started this cycle of freezing or stuck on the black screen with the loading bar permanently running.

    UPDATE:
    Start safe mode then made the instructions on the clean boot. Not checked, all iteams he says and rebooted and it worked. So I went to the next step to select only half to refine the list. Restarted and when at the loading screen for a little over 30 sec - 1 min (which is more short than the time it took to work initially after the first stage of the boot with all unchecked), but it goes to a completely black screen that has not happened before. So now, a little lost, or do I have to keep trying to refine?

    Hi Greg,.

    It will not harm the computer to run it in a boot environment.  Some programs do not work properly because they were probably responsible for their own services and rely on them to work.  You have disabled all non-Microsoft services, and things like printers and software can be difficult.

    Click Start, then options type power and press ENTER.  Let us make sure that the system is not configured to sleep.  Go ahead and put the power plan to High Performance, then click on change Plan settings below.  There will be a framework for "put the computer to sleep".  The value than ever.

    If it continues to turn black in clean boot mode, you may have a hardware problem.  One thing you could do if it's a desktop system and really need to use it now, it is the lid of the machine and aim a fan in the box.  This will help if it is overheating.

    Please complete the steps to diagnose the problem with the boot when you have the chance.
    Brent
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • When I restart Windows 7 home premium, the computer hangs on the bios screen.

    I don't know what exactly when this problem started, but I can stop the machine and it will start normally.  If upodates are installed and the machine restart it hangs at the bios screen all the time.

    For any question on Windows 7:

    http://social.answers.Microsoft.com/forums/en-us/category/Windows7

    Link above is Windows 7 Forum for questions on Windows 7.

    Windows 7 questions should be directed to the it.

    You are in the Vista Forums.

    See you soon.

    Mick Murphy - Microsoft partner

  • keyboard does not work when you start. Unable to get to the bios screen.

    When I reboot to get to the bios screen my keyboard does become functional until windows load. I don't remember what is a problem in the past, but since I disconnected everything recently I was wondering if it happens to be a USB port which remains hot during startup.  I have a Gigabyte motherboard.

    Thanks for all the help.  I found a port that remained hot during startup.  Not an easy feat because there are 6 USB ports on my MB.  Then after may restart to finally find, I remembered that I have also 2 USB ports on my Dell monitor that remain hot even when the computer is off.  A lesson I will never forget.

  • Lightroom 6.0 freezes in the start screen (victory 10 Pro)

    Hi, when I try to start Lightroom 6.0 first, the program seems to start, but it freezes in the start screen. I have Windows 10 Pro on a PC. Lightroom has always worked well on it. Can someone help me, please?

    Hi herberts,.

    Please update the Lightroom the last update which 6.5, see: keeping up-to-date for Lightroom

    In addition, you can disable the GPU in the Lightroom preferences.

    Open Lightroom

    Go to Lightroom preferences in the Edit menu

    Click the performance tab

    Deselect the graphics processor

    Restart Lightroom

    Let us know if that helps.

    Kind regards

    Mohit

  • Tecra M5 freezes at the home screen at startup (post Safeguard Easy Install)

    Since the installation of disc Safeguard Easy encryption, my M5 freezes to the initial Toshiba screen. Pressing Ctrl - Alt - Del was going on this and on backup password screen.

    It seems that there is a patch of BIOS for the Satellite Pro series, but I don't see anything for the Tecra, and Tecra M5.

    All advice appreciated.

    It's because of the bios Vista support for fastboot.
    There is a new version of utimaco released that fixes this bug.

  • Satellite P300-h-13: stops, restarts itself and then freezes in the BIOS

    Hello

    I have a laptop TOSHIBA SATELITE P300-h-13.
    When I turn it on, it starts before blocking immediately down and then it restarts itself (twice).

    Then it freezes in THOSHIBA default start screen.
    I can't access BIOS (says it charges but nothing happens).

    If I press the ESC key, I got a screen saying that the processor is detected and it gives me the ability to L2 cache, it says the RAM passed and then it indicates that the Bios system & video are overshadowed.

    I tried without the battery, but it doesn't change anything.

    Please help me solve this problem on.
    Thank you!

    Hello

    I don't know why this is happening and it's really strange question that should not happen on the new laptop.
    In such situations, you can simply try standard measures and see if it will work properly again.

    By the way: how old is your laptop? Have you noticed this behavior from the first day?

    In any case, try to enter in the BIOS somehow and set it to default settings. try to enter Advanced boot options using F8 at the start and check if the installation of operating system work (during the first backup of data, if possible).

    If nothing helps I would recommend not to do anything, but contact the nearest authorized service provider. Let them check your laptop computer and, if necessary, repair. Warranty will cover all costs.

  • Windows 7 freezes on the splash screen of Windows - in Recovery Mode, start DVD, Normal start, etc.

    Having a 64 bit Wondows 7 Home Premium on an HP Omni 120-1123w.  It freezes at normal boot and safe mode boot startup.  Get the "Windows is loading files', as the horizontal bar fills from left to right. When the bar is full the screen goes black for a second, then the phrase "Start window" will appear.  And that's all.  No converging balls.  It does the same thing if I boot from a DVD (once I get the message while pressing any key to boot from the disk).   He did the same thing when I boot from a USB flash on which I have installed Windows 7.  He even did the same thing when I hit escape to the Start Menu and press F11 for recovery of the system.

    I try to save anything on the PC.  Obviously something is damaged somewhere.  I don't know where.  I set the BIOS to default level.   I used the start menu F2 to run diagnostics.

    • CPU Test - passed
    • Connection hard drive test - passed
    • Start - passed test
    • S.M.A.R.T test - passed
    • Memory test - passed

    I then ran a sort of HARD drive test in BIOS called a DPS Self Test.   He ran for a long time, but finally passed.
    When the screen freezes, all devices lose power.  All the lights on the keyboard turns off.  If I boot from a flash drive, the flash player will Dim.

    Hello! It seems that you do every thing right and diagnostics of material seems good. IMHO you have a power supply problem or your mother Board has failed. Search

    bulging capacitors. A power supply can go wrong and get out your motherboard. Even if you have the side, turn, try to remove the RAM, using a stick at a time in different locations to see if you can start windows or load the operating system.

    Dokie!

  • New HP Pavilion freezes to the BIOS

    Hello

    my new Pavilion P6-2053de (core-i7 with UEFI BIOS) freezes at startup.

    It does not start at all. After the first saying blue screen "press ESC for boot menu", it does not continue

    If not by pressing any key.

    Pressing ESC soon going to a second screen - but no start menu freezes.

    Pressing F10 will soon also to a second screen - but no BIOS config, that freezes.

    I wonder how it could be that enter the BIOS is locked completely?

    How can I reset my system and the BIOS so that it can start and get into the BIOS?

    I tried to remove the HARD drive but no change.

    Thank you

    Ralf

    Rady wrote:

    Hi old_geekster,

    Thank you very much for your answer! Now I know that the type of my motherboard, but I had no success, still the same

    behavior.

    Strange is that both blue jumpers are placed differently in default mode on my Board compared to the specification. My jumpers are placed at 1-3 and 2-4 and not 1-2 and 3-4 in default mode!  It's strange.  Have the located at the position indicated in the specifications to see what is happening.  I don't think it will hurt anything and it could well be the problem solver.

    There is an another slider pin with 7 pins on the main Board saying BIOS_RECOVERY. There is no rider placed on these pins. How can it be used?  I am sorry to say that I don't know how to use it.  If there is no rider, it probably isn't a function for your motherboard.  HP uses the same mobos for different models.

    Any other ideas?  See my above response to your first question.

    Thanks in advance!

    Ralf

  • NB200 does not start after the bios - screen black screen with blinking cursor

    Hello

    I was using the laptop as usual when I think there may have been a virus activity - reason I say that is that my anti-virus closed unexpectedly. I couldn't restart programs files.

    I restarted the laptop.

    After the bios menu will I get a blank screen with a blinking cursor - windows does not start.

    I did the following:
    (1) create a USB bootable with Recovery Console window XP - boot with this i can see three drives C:, D: as SDA? I can see the content of these disks, so it seems that my HD works. I ran a fixmbr and fixboot, but this has not solved the problem.
    (2) create a Kaspersky bootable USB virus scan - ran it without problem - he found a few question (not on the disk boot sector) I've fixed.

    An option was to copy files from the laptop and then start it in recovery mode - so Itried to run the phone into recovery mode hold down the 0 key at startup - the bottom of the screen then displays * HDD Recovery mode * and nothing happens.

    Any help - other options would be greatly appreciated.

    My 1 year of that guarantee has expired a few months back so can't send in for repair.

    Thank you

    Hello

    I doubt that it is a virus.
    Seems the file system is damaged on the HARD drive and this is the reason why the laptop does not start until it could also be a partition of HARD disk malfunction.

    Try this; Turn on the unit, press F8, and then check if you have the laptop repair.
    If this is not possible, then you will need to reinstall new OS.

    Here you can order a recovery disc:
    http://backupmedia.Toshiba.EU/landing.aspx
    Of course you will need an external USB CD/DVD drive

  • Equium A300D - after updating the BIOS screen is empty

    Hi, I did a bios update on my Equium A300D-PSAK2E and its bricks of my laptop! When it restarts after update screen is empty!

    Is there a a sort of way to launch a recovery of bios by pressing certain keys on the power on the image of the bios on a USB?

    Kind regards

    Dan

    Hi Dan,.

    Unfortunately I think that there is nothing you can do if the BIOS update gone wrong... In this case the ROM module must be reflashed to an authorized service because guys have special tools to do this process delicate reflash.

    You can find a list of aspic here:
    http://EU.computers.Toshiba-Europe.com/innovation/generic/ASP_SUPPORT

Maybe you are looking for