NB100 - settings Internet erased!

Similar Questions

• When I click on modem settings, Internet xp tells me that a modem is installed without success.

  original title: Modem parameters, is not available.

  When I click on modem settings, Internet xp tells me a modem is installed in vain and to [uninstall my modem drivers, reboot, then install again]. How can I know which? Once ive installed them where can I find install again? Can I install them from Device Manager. I checked the modem drivers in the device manager that they work properly. I had a problem with a driver lately, maybe it's that. ?

  OK I found more information box, with the [] mentioned above, are titled slcpappl so im assuming it is the modem, now do I uninstall and install correctly?

  Hello

  Just chime in here. But I wonder if you have performed an analysis antivirus on the computer lately? If this isn't the case, I suggest strongly that. I have seen a few cases where like this slcpapple mention it's actually malware. So please what virus scanner and report it here so that we can at least rule out.

• Time settings Internet

  I tried the time servers following Internet:
  Time.Window.com
  Time.nist.gov
  NIST. Time.gov
  time - nw.nist.gov
  time - a.nist.gov
  time - b.nist.gov

  When I'm in the settings window of time Internet and I click on update now, I get the following error message:

  An error occurred while Windows timed with time.nist.gov (or server whicher, I tried to use)

  No idea what I am doing wrong?

  Mike

  Hello mdchips,

  Thanks for posting on the Microsoft answers Forum.

  I've included a link to an Article on dealing with Windows Vista time Sync problems how
  http://www.howtogeek.com/HOWTO/Windows-Vista/dealing-with-Windows-Vista-time-sync-problems/

  If your clock is constantly out of sync, even if she says that the synchronization was successful, the problem could be that your computer is losing time due to a problem with the system clock. There is an easy way to synchronize via the command line prompt.

  Clock synchronization of command line

  Open an administrative mode command prompt (make a right click, run as administrator), and then type the following command:

  w32tm/Resync

  If that's not enough, please post again and we will continue troubleshooting with you.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Firefox does not open now - I have just updated my privacy settings and erased cookies - what's past?

  I changed the privacy settings on the preferences of Firefox, including clearing cookies, history and cache, and now Firefox will not open. He said he had to restart after a privacy changes, but it does not and will not be opened by the icon in the dock or through the applications. What happened, and how can I fix the problem to begin to use Firefox again? Thank you.

  Hello

  Try to start safe mode:

  • Firefox in safe mode

  Also see this article:

  • Firefox does not work - fixed Common to restart you

• Security settings - internet Explorer automatically saves the url.s and temporary files of web pages I visit "how to fix this? or is it supposed to be defined in this way?

  my Windows 7 # 64 - a system ie #9 I downloaded 2 months Ago and now its slow way I, m ready to return to Explorer 8 #-Files to remedy this I ran a Microsoft Fix it Scan and it fixed everything except one-> he says that IE #9 records all URL, S and Temp , to all the Web Pages I Vistit is he supposed to save the Cache to make it faster, or is it wrong and how can I solve this problem... Very confused...

  All browsers do this caching.  This is to eliminate the need to keep the same things over and over again and so the download speed things up.  There are all kinds of ways to control this by clicking on the gear and then Internet options.

  Good luck.

• Restore settings after erase and reinstall

  I had to do a wipe & re-install on my Mac to clarify some issues. Fortunately, I have a Time Machine valid backup. How can I restore my bookmarks and extensions of the backup and avoid having to laboriously reinstall one by one? Thank you.

  See:

  • https://support.Mozilla.org/KB/recovering+important+data+from+an+old+profile
  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

  You can use this button to go to the current Firefox profile folder:

  • Help > troubleshooting information > profile directory: see file
  • < User > /users//Library/Application Support / Firefox/Profiles/< profile >.

  In Mac OS X v10.7 and later versions, the file $HOME/Library is a hidden folder.

  Open Finder and use one of them:

  • Go > go to folder (command-SHIFT-G) and in the type of dialogue: ~/Library
  • Open the 'Go' menu and hold down the Option key to display the library
  • http://kb2.Adobe.com/CPS/909/cpsid_90947.html Access the hidden user library files

• Connection of slow internet speed of Time capsule

  I have a time Capsule airport of 5th generation 2 TB (802.11 AC) and a modem TP - LINK TD - 8816 ADSL2 (bridged) connected to the TC. In recent weeks, a very slow internet connection has been detected (get the go-ahead in TC and airport utility)

  Of course, I started by judging my ISP but then realizes that configuration back to the modem for PPPoE over Ethernet, the connection achieved expected quotient of internet speed.

  I have reset the TC back to the default settings (to erase all of the current settings) and set it up again with the new and cool settings. Same results.

  For the record: I have experienced same speed slow results at the TC test by wireless or ethernet connections.

  Airport Time Capsule is running 7.7.3

  MacBook Pro (retina, 13 inches, end 2013) OS X El Capitan 10.11.3

  I came back to use the modem router Zyxel provided by my ISP with internet high speed optimal but misses my TC!

  Thanks in advance for your support.

  I'm in the same boat... There is something seriously wrong with the TC in PPPOE mode. And nothing you can do that on it. Apple has all the controls available in the outside world.

  I got around it by using a modem router or other router between modem bridged and TC.

  In the end I put the TC in static IP mode, and it worked very well with another router.

  See Re: time capsule Airport Guard disconnect

• All images are links (red x) but only on the user account of my husband on Windows Vista Edition Home Premium. The settings have been adjusted. Windows has been updated.

  My operating system is Vista Home Premium. We have two user accounts: mine (Administrator) and my husband.  On his account, all his images links are broken.  Images with assistance, the Explorer, Google (weather, calendar) desktop tools.  I did basic with verification troubleshooting settings, and the launch of Windows Update.  What is different on his user account?

  Hello

  1 are there any changes or updates made on the computer before the show?

  2. what browser you use on the computer?

  Method 1:

  If you use Internet Explorer and you should disable or hide pictures, then I suggest you to follow the following steps:

  a. open Internet Explorer.

  b. click on Tools.

  c. click on Internet Options.

  d. on the Advanced tab, check the option show the pictures.

  e. click apply and OK.

  f. restart Internet Explorer.

  Note: If the option to show images is disabled, you will not be able to see the photos using Windows and also supports.

  Reference:

  Images are not displayed on Web sites in Internet Explorer

  http://support.Microsoft.com/kb/283807

  Method 2:

  I suggest to optimize Internet Explorer and check to see if it helps.

  http://support.Microsoft.com/kb/936213/ro

  Note: Please note that reset settings Internet Explorer (IE) will reset all of the settings defined by the user, including those established by the installed extensions, toolbars and other add-ons for IE by default. This includes all the security, privacy and settings area. Also this will erase browsing history, delete all temporary Internet, cookies, form data files and especially all the passwords.

  Method 3:

  I suggest to create a new user account and check if the problem persists.

  Create a user profile.

  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

  If the new user profile resolves the problem, you can screw the corrupted profile and re - install the applications and programs.

  Reference:

  Difficulty of a corrupted user profile

  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  Let us know if it helps.

• iPhone will not stay connected to the internet?

  * Posted on MacRumors forums but no answers *.

  So basically since a few days my phone sometimes don't remain not connected to the internet network of BT-Hub3. I connect to it and then sometimes, it will stay connected for a minute for a few seconds and then disconnect. When I go to the wifi thing it seems available to connect to. After a couple of times that to happen, it will say wrong password (this is the password) and disconnect me and then I have to type the password. Repeat to infinity. It's honestly so frustrating.

  Sometimes it will stay and be fine but his is happened twice in the last few days and never happened before with any phone I've had.

  I try my phone with my BT-Hub4 internet network and it will stay connected. The only problem with this is that the internet is further (bottom), so has a low connection that does not charge anything unless I lean on my bed.

  Initially, I assumed my internet pick, but I'm typing this I am connected to the network BT-Hub3 without disconnect him, even once.

  I had the phone for a year and 2 months (previous owner had since October/November/December in the year of release) and recently got a replacement of the unofficial battery if this of any help. I also still have my phone on the low power mode. The phone always properly connect to the BT-Hub3 network even with unofficial battery and low power however mode.

  I had several other problems with the phone (camera, apps download not heat no reason apparent, random battery drains despite the new battery in just 3 months and has the same problem with the battery, slow Touch ID that apparently is not normal), which most recently happened.

  I had all the settings to reset a week or two ago but surely if who messed with my settings internet I would have had the internet issue earlier? Not sure if I should try to reset the network settings. I hate this and only do if I need to.

  One last note, I have the latest version of iOS so ignore saying his 9.3.2 on

  Hi pinkdolphins0400,

  Thanks for posting in the communities of Support from Apple! I understand that you are having problems with your iPhone does not stay connected to your internet connection at home. I use my home Wi - Fi network to stay connected, so I use all the cell data, if I can understand wanting to make sure that you are able to stay in touch. I am pleased to provide you with a few suggestions for you.

  The first thing I recommend you do is follow the steps described in the following article. It seems that you have already experienced some of these steps, but I want to be sure that you have covered everything.

  If your iPhone, iPad or iPod touch connects to a Wi - Fi network

  Since you mentioned that your iPhone will stay connected to your network to another, you can take a look at the network settings for the one that you are having problems staying connected to. Article below provides information about network configurations suggested for Apple devices. You can also check with the manufacturer for your BT 3 - Hub see if there are updates that must be performed. This can cause problems with disconnects.

  Recommended settings for the WiFi routers and access points

  For other problems you mentioned (apps do not download, camera, battery draining, contact ID, etc.) reset settings was a big step in troubleshooting to try. If these things are always happening, I recommend making a backup of your iPhone and then restore it via iTunes. The backup will ensure that your data is saved. When you perform the restore via iTunes, you'll want to set up as a new device (temporarily), and then test it. Once you test, you can try to restore your backup. You can find all of the information below, you will need.

  The backup of your iPhone, iPad and iPod touch

  Use iTunes on your Mac or PC to restore your iPhone, iPad or iPod to factory settings

  Restore your iPhone, iPad or iPod touch from a backup

  See you soon!

• Firefox Android on Nexus 7 (2012) does not erase the history/private data on exit even if I put it to do.

  I checked the updates for the version of Android, Firefox and I have the latest version. I changed the settings to erase privacy on Quit but it does not work, history still shows when I reopen it Firefox. Any suggestions?

  Found the problem. Previous Android version of Firefox did not have an option "Quit" to close the browser. I had an add-on called "quit now" installed. Latest Android now seems to have its own Quit option that appears now. I uninstalled the add-on "Quit Now" and when I close Firefox with its button leave the history is cleared. Others having the same problem should check their modules under tools to see if they have the add-on "Quit Now". I caught only solutions having seen 2 different options of Quit.

• Equium A100-147: Internet connection shuts down when idle

  I had a problem with my computer since I bought it, that my Internet connection is cut on me, apparently after I let the computer idle for a short period of time.

  Currently, with a direct cable connection, I can get the connection up and running again by disconnecting and then reconnecting the cable, but sometimes that doesn't work and I have to restart my internet box to raise the connection again.

  When I use the wireless, the same thing is happening, although I always reload the internet zone to re-establish the connection. It seems to be a problem of time, but I can't work on how to solve this problem. Any suggestions?

  Hello

  This sounds like a problem in the router settings (internet box)!
  My router supports an option that seems very similar to you time-out problem!

  If this option is enabled router disconnect after several minutes (this depends on the settings) if the internet connection is no longer necessary!

  I think you should check the router options!

  Good luck

• Blu - ray 570 - internet access failed

  I have problems connecting with my BRP570. I am running Mac OSX 10.6. I have a router Linksys WRT54G 2.4 Ghz and a Netopia modem. My internet is speed of 3 mbps. Everything worked perfectly for the last 10 months... until now.

  When I connect the BRP-570 directly via an ethernet cable from my modem I get the message that the connection is OK and the internet access is OK.

  When I connect the BRP-570 via a cable ethernet cable from the router attached, I get the message that the connection is OK and the internet access down.

  But even when I go back and use the wired connection directly from my modem, where internet access is OK, I always get error messages when I try to connect to an online service such as Netflix, Hulu or Youtube.

  I then get an error message saying "cannot find the server. "IP address:-.-.-.-
  The irony is that when I run the numbers of network settings Internet status all IP and subnet mask and all appears well.

  When I run the System Info screen I see all... EXCEPT at the very last line, it says "Provisioning Server Connection Status: failed.

  I tried everything... resetting the network settings, the settings on my Mac OS x network settings. I tried the stealth mode and non-stealth mode in the settings of Pings. I tried to reset each device again.

  Nothing makes no difference. I suspect it might have something to do with Earthlink, because he started after they reset the settings of my ISP. But even after clearing and reload all settings of network Sony BRP, the problem persists.

  I don't know why they make a device that has so many hoops to jump through to connect. I noticed that the Sony site is much the same. At least I have type the EXACT name of the blu - ray player it will reject everything, as if there is no such thing as a BRP-570.

  Ugh... frustrated!

  (I will not repost this twice, but I wanted to clarify more details in case anyone can be of any help. I'll start now to try to get in touch with Sony about this. (Thank you!)

  p.s. just tried to call Sony. After having been harassed in broken English for 20 minutes on the basis of the ABC of modems and computers that I will be transferred to the next level of tech support tomorrow. I would call the Helpdesk of Sony as catastrophic to nonexistent. Frustrating!

  Hello
  I have a few questions. Is your internet connection DSL or cable?
  What is this before you went with Earthlink? How your computer connects to the Internet? Is the model number of your BRD570 player really or is - this BDP-s570? I can't find a US / Canada of this model. I might be able to give you a few things to try, but I need more information.

• How can I configure Group Policy preferences Internet Explorer 8/9 in Server 2008?

  The only options I have are for IE 5/6/7, I'm doing it under Internet under User Configuration settings > preferences > Control Panel Settings > Internet settings

  Windows Server forums:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• Issues relating to Internet WRT110

  It happens every morning when I wake up.  I unplug my router & modem every night and in the morning that I plug them back in.  My computer (or something else, that I have connected to it) has some problems with connection to the internet, almost as if there is no absolute communications of the modem to the router.  The only thing that works for me to get up is to change the MTU settings on the router configuration page.  The problem with that is that I have wireless turned off so that the internet at work.  Once I changed the MTU settings internet works perfectly fine, but I can't go back into the router configuration page, until I have restart the router.

  This has happened recently and I don't know why he started to do so.

  Any suggestions on why he could do this and how can I solve the problem?

  I suggest that you reset the default router and reconfigure the router from scratch. If there is a updated firmware to update, the flash.

• How to reset the laptop to stock settings

  I want to reset my laptop to its stock settings by erasing all how can I do?

  Currently, I bought a used laptop and the person who sold it to me was not to erase everything on it, so I want to know how to erase everything and get the stock settings.

  Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Also ask them if it is possible to do the recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  See you soon.

  Mick Murphy - Microsoft partner