NB200-10Z - loose battery

Similar Questions

• NB200-10Z - battery care

  I recently bought a netbook NB200-10Z. I'm not really sure the battery care.

  Should I keep the battery charge all the time, when I do not use the machine or only to connect the battery to the hand when it is unloaded.
  In short how I look after my battery to maximize its life expectancy.

  Hello
  I have three golden rule for my battery...
  -For the first and the second time, you should drain at all then a charge to full capacity.
  -L' another time, remember to recharge the battery when reach about 30%.
  -Remove the battery when the Netbook has been plugged for more the 8 h.

  Also try to download this tool http://www.batteryinfo.de.vu/

  It gives the level of your battery and other useful info.

• NB200-10Z starts but the screen is blank

  Hello

  I have a Toshiba NB200-10Z netbook.
  It turns on but the screen is blank.

  Can someone help me coz I don't know the cause of her

  Hello

  Try this:
  Remove the battery and unplug the AC adapter.
  Then wait a little (1 hour should be enough)
  Then reconnect both sides and try to turn on your NB200.

  If it s not a serious issue, then your NB200 should turns correctly.
  Otherwise it s a serious question, and you will need professional help from a technician of the ASP.

• Drain power NB200-10z

  Hello

  I have a netbook NB200-10z, which has a power consumption good while it is activated and in use. However, if I turn it off and do not use it for say a week he loses half its load, after 2 weeks, he died. I tried to remove the battery from the netbook to see if I had a suspect battery. The battery kept his charge that points to something in the laptop using the power while it is turned off.

  Hey can anyone me or is this normal?

  Terry

  Hey,.

  I think this happens on most laptops, because in the BIOS are a few characteristics that they must be turned off to stop the discharge while it off s.

  You should follow the instructions posted by Akuma. Disable these options, save & exit the BIOS Setup. Check again, and the battery should not be more.

• NB200-10Z - freezes after turning on

  Hi, I used my NB200-10z for 6 months with no problems.

  But today I could not activate it immediately. I have to turn on and off the switch several times to make it work. The battery is charged and there is power.

  After I press turn on button, the cooler switches on, the HARD drive indicator is green and the image "Toshiba Leading Innovation" appears. The HARD drive light turns downwards, and then the picture freezes. And then nothing happends. The laptop does not have the "F2" or "F12" keys I turn it off and try again. After several time the operating system starts and the laptop works perfectly.

  This situation repeated again - I have to turn on and off the switch several times to make it work.
  Please, help me, what I do that Notepad starts correctly?

  Hi Inccino,

  Which is really strange. Normally this happens if a material part can t be recognized correctly but it is difficult to say what is the cause

  In my opinion, you can try to update the BIOS. Maybe it will work

  Otherwise it s time for professional help-online service provider approved
  http://EU.computers.Toshiba-Europe.com > support & downloads > find an ASP.

  Good luck! :)

• NB200-10Z does not start - slect boot device message

  Hello, sorry for my English, I'm Italian and I have him translated by the translator.
  I am writing because I have a big problem.

  My toshiba NB200-10Z has this break: I turn it on and I get the "Toshiba innovation leader" screen and bottom left shows «crazy (F2) Setup, press (F12) to the boot device selection menu...»

  No matter what button I press him, and still nothing happens. I tried to replace diskbench hard ram, but nothing does not change.
  I don't know what to do.

  I am very worried. Can you help me?

  Thank you to tell me everything

  Dino, Rimini Italy

  Usually, the message appears because the laptop could not boot boot device...
  In most cases the disk HARD is not found in BIOS due to the fault and therefore the laptop not found system.

  Question: are you able to access the BIOS F2 key?
  If so, the HARD drive is listed in the BIOS?

  You can boot from another bootable media such as disk or a USB key?

• NB200-10Z - how to restore factory settings?

  Hello

  I seem to have a pretty annoying problem with the NB200 - 10Z.
  The operating system is WinXP SP3.

  I was looking to restore it to its factory settings by using the tools of Toshiba, pressing F8 during the boot sequence, this however does not take me to a screen where I can choose 'Repair' as online guide of Toshiba said.
  My only options were by selecting start normally, or start in safe mode, safe mode with network and so on. I have consulted the original manual included with the laptop, but that doesn't make the light on the problem, in fact I found the manual to be pretty empty.
  There isn't any help on formats, restore to factory or other maintenance. Disappointing.

  Another option is creating a recovery disk, however, Toshiba tool will only advise that it cannot find all the stations that contain writable media, simply because the NB200-10Z is not a CD/DVD/BD drive. The only available ports are SD and USB.

  So my question is, how do I format/reset to factory settings the NB200-10Z without external CD/DVD/readers writers, using the USB/SD slots? Because I can't find a way to create an ISO recovery with the Toshiba tool, which I was able to get on a bootable USB device.
  And even if there is a way to do it, how do I adjust the NB200 to boot from USB? Looking at the bios settings and boot options, showed that only the LAN and HARD drive are supported.

  Greetings,

  Boris

  Hi Boris,.

  Usually, if you start media recovery disk creator, you can choose on which device (CD/DVD or USB) the recovery media must be created. There you should be able to change between the CD/DVD drive and USB. If you select USB you can create the recovery on a USB media.
  You can boot from that disk if you connect before you start the computer, then go to the start of the BIOS (F12) menu and then you can select the USB key.

  According to the manual of the drive recovery HARD can be started while pressing the value 0 (zero) key before Windows starts.

  Check this box!

• Toshiba NB200-10Z change HARD drive to SSD

  Hello. I plan to buy Toshiba NB200-10Z netbook. I would like to ask if the next drive 'OCZ-OCZSSD2-1VTX60G 60 GB Vertex Series SATA II 2.5 SSD Drive' will fit this netbook?

  Post edited by: Lee

  Hello

  The SSD must fit into the laptop with no problems, because it s the same size as a HDD normal (2.5).

  The point is if SSD drive will work in NB200. Normally, an SSD should work on all SATA interfaces, so in your case, I would try an SSD.
  After that, you can validate the experience with this player. I am interested in. :)

  Good bye

• NB200-10Z - what touchpad driver should I install?

  I have a nb200-10z... and both pilots theres on the download... semantic page touch pad or Alps touch pad? what one do need me?

  Ive had a problem when using the touchpad, it stutters and crashes sometimes for a few seconds during its use... really annoying especially when playing games. He also did something weird when typing... sometimes it will just move the cursor above so I'll carry on typing in the middle of stuff ive already typed! seems to do it on the internet and not on word. How can I fix? I will call toshiba on this subject, if you guys don't know.

  also, he started only to hang on shutdown... every time... He did this whenever my external dvd player usb or any what device as the mp3 is NOT connected... even if I "remove" it and disconnect and then stop it crashes. so, I must leave the usb cable connected to stop correctly. any suggestions on that?

  any ideas on either? It certainly will not be closed properly if a usb device (all) is connected to the USB sleep n load...

• Power cord for a Toshiba NB200-10Z bought in the United Kingdom EU?

  Hello

  I just ordered the Toshiba NB200-10Z of Amazon.co.uk because the model wasn't available everywhere in Finland, despite being listed on the site of Toshiba Finland. It ' probably be only with the style UK power cord & plug-and - my concern is where can I find a power cord appropriate for the unit (with a schuko type plug)? Or are the UK and different EU cords also at the other end where they plug in the power adapter, which is what I need to get a power adapter and a power cord?

  Thanks for any information.

  Best regards
  Boucicaut

  Hello

  I agree with Al - eX. As you can see on the underside of the adapter AC/DC it can handle voltages range from 110 to 240 volts.

  You need only a new power cord. Therefore, you can contact the service provider authorized in your country. Maybe you can exchange the cable and if you get one free.
  Alternative go to your favorite computer store. Such a cable, you must find there too.

• NB200-10z Wi - Fi can not be turned on.

  Hi I have a Toshiba NB200-10z. I am not able to turn on the wireless feature. See this screen capture:
  http://i.tinyuploads.com/NVT1Jc.PNG

  I have windows 7 ultimate 32-bit OS. Please tell me the solution to fix it on.

  Hello

  It seems that you have installed a new Win 7 on this laptop.
  The fact is that WLan can be activated using the FN + F8 key combination

  In order to use the functionality of the fn, the VAP (value added package) for Win 7 32 bits must be installed.
  Did you install this in the past?

• Is it possible to upgrade NB200-10Z with 3G modem?

  I have a Toshiba NB200-10Z (P/N PLL20E-002011RU), and it has no built-in 3G modem.

  Is it possible to insert a modem, as Ericsson 3507 g, is there a free mini-PCI-E slot, slot of SIM card and antenna for it?

  In addition, it would be great if it were possible to have access to data from Toshiba HDD Protection sensor to automatically turn off the screen and perhaps use as a virtual joystick sensor! Someone did he do suah a pilot already?

  As much as I know, these updates is not possible. The hardware platform of your laptop is not ready for these updates. Forget it.
  Moreover, when you want to order these parts?

  Second question is really interesting, but kind of funny and I wonder, really, that you think something like that. Virtual joystick? For what?

• How can I install new windows on NB200-10z without a CD player?

  Hello

  I have a mini computer "Toshiba nb200-10z" and is no more startup.
  I would like to make a recovery, but it does not work.

  I know there's a shortcut like press 0 when the laptop starts.
  With this shortcut, you can start the recovery in order to reset the software.
  But when I press the 0 button it gives me an error.

  So I think that the recovery disk/partition is lost.
  How can I install new windows on this minilaptopUri without a CD player?

  Hello

  Try this procedure:

  How to recover a Toshiba notebook with the HDD recovery procedure
  http://APS2.toshiba-tro.de/KB0/HTD1303440001R01.htm

  If this does not work, you can try to install Windows 7 with USB flash memory key.
  There is a nice tool from Microsoft called Windows 7 USB/DVD Download Tool
  http://www.microsoftstore.com/store/msstore/HTML/pbPage.Help_Win7_usbdvd_dwnTool

  You will be able to download (you will pay for the iso file) an iso file and would be able to create a bootable USB key.

  Here's a nice instruction how to install Windows 7 on USB
  http://www.intowindows.com/how-to-install-Windows-7vista-from-USB-drive-detailed-100-working-Guide/
  but in this case you need a new installation of Windows 7 DVD
  ?

• Cannot boot Linux from the CD/DVD USB drive - NB200-10z

  Hi all

  I try to install linux on my nb200-10z fedora11, but a strange thing happens: when I choose to boot from the cd/dvd and I insert my DVD my laptop boot linux normally HD; If for example, I insert the recovery dvd created with the toshiba utility, it starts on the dvd rom usb...

  A that someone has experienced the same problem? y at - it the possibility to solve this problem?

  I also noticed that if any usb cd/dvd-rom is present, the bios boot options show all cdrom option in the start menu

  Thank you

  Hello!

  Well, to me it sounds like it's the Linux boot disk isn't working properly if you can start the Toshiba Recovery disk successfully.
  Have you tested the same disk of Linux to another computer or laptop?

  In your case, I would try to burn the Linux disk again and use high quality as Verbatim DVD - R or TDK media.
  Never had any problems with the two manufacturers.

  Good luck!

• NB200-10Z - Webcam graphic render fail

  I searched on google, there are huge articles on this camera problem: graphic Reder fail, happened when using SOFTWEAR ASSISTANT CAMERA, which means the build in camera is not working!

  My model is Toshiba Netbook NB200-10Z. I tried the solution that advised on the internet websites, which is reinstalled the driver for the camera then updated. He however still cannot do the camera work.

  Please provide a solution for this problem.

  Thank you very much!

  Hello

  Have you noticed this problem on the first day? With the factory settings, I mean that everything should work OK.
  You have installed THIS version?