NB200-12N - USB port does not work

Similar Questions

• Satellite L650 - 12N USB Ports does not work

  My satellite L650-12N usb port does not work. I did everything that I could and it does not work.
  It shows a yellow exclamation mark on my system.

  I try so many ways, including the recovering auto troubleshooting, formatting and system he could not work.
  Under the key USB gives error code 43, I do not understand.

  The webcam and the wireless card no more.
  This boot problem after a storm in my area some time ago.

  Please can someone help.
  Thank you
  Sani

  Hello

  > This problem start after a storm in my area some time ago.

  Because other devices don't work properly and because procedure didn t get it back help you solve this problem, I think that the problem is related to the hardware malfunction possibly that the motherboard was hit by lightning, which would explain the problems

  I think you should ask the maintainer authorized Toshiba in your country to check the motherboard.

  But in my opinion, that the warranty does not cover the issues of environmental impact maybe your household insurance could help you

• El Capitan USB port does not worked well under Yosemite.

  Running a VMWARE image of the Linux kernel using a Sentinel of SafeNet USB license dongle canned.
  Has worked perfectly under Yosemite unfortunately too long to go back.

  The USB port does not work with other USB devices?

  I suspect an incompatibility with the EC and the sine of dongle USB EL strengthened using third kexts. They must be signed, and so a softer update for the dongle is probably necessary.

  http://arstechnica.co.UK/Apple/2015/09/OS-x-10-11-El-Capitan-the-Ars-Technica-re view/8 / #h1

• Satellite Pro 6100: USB port does not work after the return of the mode "Eve"

  I have a strange error on my USB ports on Satttelite Pro 6100 with XP SP2.

  Two USB 1.1 ports work fine after cranking up what the laptop goes into mode 'sleep' (automatically or manually).
  The restart afret optical mouse connected to the USB port does not illuminate and the XP system displays the error message on the device not recognized on USB port.

  Plug the mouse on or off doesn't change anything. Only restart helps.

  Any ideas?

  It's very strange, but it will be interesting to see if the same problem persists with other USB devices. Can you test and post again on the results?

• Satellite L40 - 18W - USB ports does not work after format HARD drive

  I formatted my laptop "L40 - 18w" after that all usb ports do not work.

  Could you please help me on this issue

  Thank you

  Ben is right. After the installation of the operating system as a first step, you need to install driver chipset.
  Please see the download page for Toshiba under http://eu.computers.toshiba-europe.com
  There you can find all the drivers for your model of laptop including driver chipset.

• Satellite A10 s203: USB ports does not work

  Hello! All of a sudden my usb ports do not work on my satellite sa10-s203. Tried everything (even restarted the ashes of l-top nothing happened.) Enybody can help me? Kris...

  Hello

  If the USB ports are properly recognized in device then as Quad Manager said it could be an external problem. The USB port is 500mA power. If the external device requires more power to work in this case, it of necessary to use the external power supply.

  Good bye

• A 'Powered USB Port' does not work on Mac Mini

  I have an external POWERED USB multiport block. When I plug the Superdrive into a Port powered on the unit, which of course is connected to my Mac Mini (2012) the Superdrive not even she acts as if it is connected and will not accept a disc. All ports are USB 3.0. I'm so uncertain that the Superdrive will work on any USB port other than the one on the Mac itself. Any advice? I El Capitan installed, but it has worked that way before the upgrade.

  This specific USB 3 hub? Not all work with the Mini

  Hub USB 3.0, attached to a Mac Mini does not work

  Re: Is there a USB 3.0 Hub that really works with the Mac Mini?

• M40-265 - 2 of 3 USB ports does not work

  Hi all

  Since yesterday, I have my Toshiba Satellite M40-265.

  My problem is 2/3 ports USB does not work.
  I've tried different USB devices such as memory stick, mouse usb and usb printer plugin.
  Just plug the device into the left USB port, if they will be recognised by windows xp home.

  Any ideas what's wrong with my laptop?

  CU,

  GG

  Hi Gerold,

  It looks like a hardware problem with your USB port. Visually check the ports that do not work and you should see a central plastic ankle against which should be four strips of copper fitting. Make sure that none of the tapes is twisted or damaged, it is quite common for one or several of them have been accidentally bent out of position or ankle Central plastic must be broken.

  Kind regards

• USB port does not work

  The model of my laptop is HP Pavilion 2235dx g4. I use windows7 32-bit. It has 3 usb ports. It contains a usb port, it is just side & two others contain he left aside. In this way the usb port on the right side works fine but two other usb ports on the left side does not work.

  What can I do for this?

  Help me...

  Hello:

  Download and install the AMD Chipset drivers and reboot.

  You want the first file on the Web page.  To install the smbus and usb 3 controllers.

  http://support.AMD.com/en-us/download/chipset?OS=Windows%207%20-%2032

  If you need graphics driver, AMD Beta driver should work for you...

  http://support.AMD.com/en-us/KB-articles/pages/latest-catalyst-Windows-Beta.aspx

• My usb port does not work. Device Manager says he has a "code 10".

  My dad recently bought a laptop on ebay. It's a HP Omnibook 900 with a 4 GB HD. The previous owner had improved from the original from Windows 98 to XP with SP3.

  It has a USB port in the back & it does not work!

  In fact it is not even appear in the Device Manager! I need to select 'Show hidden devices' to see same the USB hub root. The USB port has a yellow warning icon. In properties, it indicates the port is enabled but does not work because of a "Code 10".

  What the devil is a "code 10" & how in the heck to solve this problem, so that the USB works?

  The port is powered. When I connect devices usb load they turn on & load, but, of course, are not displayed on the computer. My best theory is that the port can be usb 1.0 but the software is intended for usb 2.0 and what could be the cause of the problem. That's just guessing on my part because I do not know with certainty if the usb is 1.0 or 2.0.

  It is especialy boring being the only external devices can I plug a CD player (unwritten) & a floppy drive. It would make my life much more pleasant if I could run software, backup & file transfer, etc. with a usb drive instead! It could even than the laptop quite useful to be worth the bucks thirties, my father paid for it!

  Help, please. Thank you.

  Hi SnarFoo,

  Method1

  The Code 10 error code is generated when Device Manager it has not enough information or error that has spread upward through the device drivers is not recognised by the Device Manager. In addition, this error may occur if one of the pilots who needs the unit does not start. If multiple drivers are used by a particular device, it can be difficult to determine which failed.

  See the article and check if that helps.

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers

  http://support.Microsoft.com/kb/943104

  Method 2

  If the previous step fails, then remove and reinstall all USB controllers on the computer and check if that helps.

  To remove and reinstall all USB controllers, follow these steps:

  (a) click Start, click run, type sysdm.cpl in the Open box, and then click OK.

  (b) click on the hardware tab.

  (c) click the Device Manager button.

  (d) expand Bus USB controllers.

  (e) right click on each device under the Bus USB controllers node and then click Uninstall to remove them one at a time.

  (f) restart the computer and reinstall the USB controllers.

  (g) connect the removable USB storage device and perform a test to ensure that the problem is solved.

  Advanced troubleshooting tips for General USB for Windows XP problems

  http://support.Microsoft.com/kb/310575

• Satellite A200-13O - USB port does not work

  Can you help me? I have a new Satellite A200-13O, USB does not work.

  Hi Gilbert

  What do you mean exactly with the USB does not work?
  You plug the 3rd USB external devices advantage, which cannot be recognized?

  Have you installed all necessary drivers for these devices?

  What operating system do you use? If you are using Vista are you sure that the external USB device is compatible and supports the Vista operating system?

  Please post more details!

• Lenovo G505 3.0 usb ports does not work with Win7

  Hello.

  I bought Lenovo g505 and installed Win7 Ultimate SP1.

  The left, two USB 3.0 ports do not work.

  I could not find the drivers for it.

  Help, please.

  
  

• Photosmart C4280 All In One: USB Port does not work

  When I try to scan, I get a message saying that the USB port is not installed. It is installed, but I bought a new USB port and still get the same message.

  Hi @MrsQ3,

  Thanks for getting back to me with this information.

  Have you already tried to install the software and drivers from hp.com printer? If you do not try to download the HP printer installation wizard for installation. This tool will find the most recent version of the printer software and drivers available for Windows 10.

  If you have already installed the printer software, try downloading and does not perform the HP print and Scan Doctor. This tool can diagnose and solve many problems of printing software and printer.

  Please let me know how it goes.

  Thank you.

• One of my usb ports does not work. A top forward on a MacPro 3.1

  So I plugged it in a charger to charge a battery. He went for about 1/2 hour then I got a message a lot of power, port and it will stop the port. Something like that. So now the port does not at all with any device. Can this be reset?

  Running OS 10.6.8 snow leopard. 3.1 MacPro Tower.

  Try a reset of the MSC...

  MacIntel: Reset of the controller (SMC) system management

• USB ports does not work

  I intend to reset my laptop to factory settings by having the PC clean up the hard drive and reinstall Windows 8.  Before I do, I'm copying the files on my flash drives. I have a moment (I'll call him 'A') is a 32GB (brand new, he got today) which is/has been formatted with diskpart (so I can use it to create a recovery partition).

  About 78-80 percent of the formatting of diskpart, I put in my latest flash player (I'll call it 'B') to copy some various files that do not have to be copied, but thought I'd for a while once the laptop has reset.  Unfortunately, as soon as Flash Drive 'B' has been plugged in, my mouse work anymore (so I just unplugged thinking the battery died), and the laptop does not save Flash drive 'B '. I tried to put the other 2 ports USB that were not used, same thing, the laptop does not save it. I refused to get out of Flash Player 'A' because it is / was still formatted with diskpart. I checked the file Explorer, and the two flash player 'A' and 'B' were not under 'computer '.
  Fortunately the files I really need to be backed up, are. So, I'm ok with that. Oh yes and I tried to put in flash players, and they were not recognized by the laptop.
  Couple questions:
  (1) Will Flash drive 'A' be affected in any way since it was "unplugged", while being formatted with diskpart?
  (2) my laptop isn't even a year yet, then how/why would my just closed USB ports?
  (3) is it possible that all 4 ports could just die at the same time random?
  (4) I really hope that's not it, but my motherboard could be beginning of failure?
  My laptop is an ACER Aspire V3 771 G, 1 TB HDD, NVIDIA GeForce GT730M, 8 GB of memory (4 dedicated for video) DDR3, Core i7 and running Windows 8 and I have had since about June of 2013. Main uses are for some school work dealing with CADD, game on PC via Steam, YouTube and Netflix occasional streaming movies via a 3rd party source that so far has given me problems such as viruses and bugs.
  I'm going to try to uninstall the USB controller drivers and reboot the laptop, unplug the power and take the battery method, simply by restarting the laptop WITHOUT uninstall the USB controller drivers. I'll try these stars and come back to say if either one of the fixes worked.
  * Real quick as question 1. USB key "A" literally just a finish is put in shape and when I entered the command 'assign', that the flash drive has been recognized once again, until I quit diskpart, now it is not yet recognized and even goes with my other, and my mouse (which the battery is NOT dead).

  Well, I would just put it out there, it was just a hiccup. I went to the stop of the laptop and he "fell on a problem" and instead start again, he drilled in reactivating the USB ports.  They all work very well. YAY! :)