NB200-12W - t - it have integrated SIM?
Hello, new user, so apologies if this is a stupid question!
I have a 1 month, NB200-12W (PLL23E) and use it with a vodafone dongle to the United Kingdom. I would like to use the sim card in rather the dongle and would like to know the following:
1. my notebook has a built-in sim? The manual says it is and there is a slot, but when I put in a sim card it does not seem to locate correctly!
2. If this can you pls explain how I need to implement? What software, drivers, etc. must be loaded!
Thank you very much
It seems that nifer is right and your model isn't equipped with 3G. This means that you must use 3G dongle from Vodafone.
I think the manual written on it, because some models are equipped with feature and others do not. So don t you worry not about it, you need the dongle you have already used.
I am looking to buy a NB200-12W for the bigger hard drive, but I need to be running XP Pro to post a link in my corporate domain (active directory) can I downgrade to XP Pro (I have a full copy of XP Pro) or will I have problems?
You could do an install dual boot, so you have two choices at startup time. That's what I did, but in the opposite direction since XP is already installed. I created two new partitions, D and E. XP is on C, Windows 7 is on D and all my data files, music, movies, etc. is on E. I did it with the utilities on the Hiren's boot CD. I created a bootable USB and installed the Hiren on this files.
Because Windows 7 was installed first, XP Setup will overwrite the Windows 7 boot sector. To restore the computer to dual-boot two operating systems, you need to start and then a reinstall of Windows 7 until you get to the repair option. Then select fix boot and it will fix the boot sector so that you can select Windows 7 or XP.
Let us know what you decided to do it and how it worked.
IPod touch 6th generation have a SIM card and it can make phone calls with the devices iOS?
No, it's an iPhone without the "phone".
I have my 5 factory reset iPhone, now I can't set up my iPhone because it must be enabled, and I don't have a sim card to make. Is there a way I can install and use my iPhone without needing to be activated? Can someone help me please?
To skip the activation of sim card, you can use iTunes if you have a CDMA iPhone. However, if you have a GSM model you will need to insert a sim card to activate your iPhone (it can even be used/inactive). Here is an article that will help you determine if your iPhone is GSM or CDMA: http://osxdaily.com/2012/11/15/determine-iphone-gsm-or-cdma/
My wife made me an iPhone 5, but it doesn't have a sim. How can I find out what IOS is on the phone and sellers it work on?
On the back it is marked A1429.
Other Sim cards by train until one works, you will need to go to an Apple Retail Store or contact Apple Support and make them check the lock for you state.
For the iOS version, he will find in the Middle-> General-> about-> Version once the iPhone is fully active.
Fact to have integrated Wi - Fi AirPort Extreme middle of my iMac (early 2009 model) wireless networking is wireless?
Yes, this does mean that it can access wireless internet if you have a router like Terminal Airport Express or Airport Extreme wireless. Assuming you're not planing to carry your iMac autour with you and use it at Starbucks.
I want to put my iPhone 3GS as a new iPhone, but I don't have a SIM card, what should I do?
You must use a SIM card. If you plan to use the device as a phone, then get a SIM card by the carrier that you plan to use. Necessary to activate an iPhone SIM card.
Animate cc, the police is both by default when you change the size of the text field. Have integrated a font with the name prjFnt... but once I have change the rating in the design view of the prjFnt goes to the new roman times... what a mistake... don't
Animate cc, the police is both by default when you change the size of the text field. Have integrated a font with the name prjFnt... but once I have change the rating in the design view of the prjFnt goes to the new roman times... what a mistake... don't have we not no matter what patch
This problem has been fixed in the latest update to animate CC.
You can upgrade to animate CC 22.214.171.124.13 creative use of cloud App or via the Help menu > updates.
Hi, I am the F50 - 12W. It is under Vista Home Premium.
First thing I did was to go through the list of services and the vista settings, turn off everything I don't don't need or use. Worked a treat. But...
Only problem now is that I managed to stop the operation of the front buttons. They do the beep when you press on and do the thing of glow wee to show that they responded.
But nothing is really happening.
Anyone know what I could have done?
Really interesting, I had the same problem a few days ago on my Qosmio F50 I tried many things and at the end of the story, I had to reinstall Windows because an application or a Windows Update wasn't compatible with the software that controls the light buttons you want to say
In any case, I think in your case it of the same. After you have disabled/deleted some stuff and installed the updates/applications, only the buttons don't work anymore.
First of all I have to say it is important that you disable t n programs all services of Toshiba or startup in msconfig. This can affect the illumination function buttons and FN keys so check cela and allow all the stuff from Toshiba.
If it doesn't work after that you should try to reinstall the package of value added. This package contains the software and drivers of these keys. You must follow my workaround solution:
1. download the latest PPV for your F50 on the Toshiba site
2. go in Control Panel > Add/Remove programs. Find the Toshiba value added package and remove it
3. restart the laptop
4. download and install CCleaner. This cool cleans up the registry of Windows and system files. He should find some registry keys of Toshiba you should remove with CCleaner.
5 reboot the laptop
6. install the PPV that you already downloaded
7 restart once again
You are lucky is it support buttons work and if not you should look into the Toshiba. Here, you can assign different application for the multimedia keys. For example switch illumination, you must allocate the dimmer.exe. That you should find in the Toshiba folder (C:\program Toshiba).
In the worst cases, you need to reinstall Windows using the Toshiba recovery disc or HARD drive recovery option. :(
My computer details:
Processor Intel P4 3.2 GHz Hyper-Threadin
1 GB of RAM
integrated video card type: Intel 82865 G 128 MB
I guess that the integrated video card works in VGA mode low resolution so that you can use the computer.
Have you checked the Intel site and run Windows Update to search for a driver?
If there is no driver, you can add a video card in the PCI or AGP in the computer slot.
After inserting the sim card it shows network and seems ok. but after awhile my iphone5 shows invalid sim. IM facing this problem for the last month and half. can anyone suggest me on this subject?
It could be the current SIM card, or it could be the settings of operating system or to the carrier.
Try going into settings > general > all. After a few seconds you will get a prompt to update if it is available.
If there isn't, I'll try to do a backup and restore then the device in iTunes to install a new copy of the software, then set it up as a new phone for a day to test it.
If after you restore the phone again to do, try to get a new SIM card from your operator.
If it's still doing with a new SIM card, it is material to the phone and you should get it looked at.
I recently bought a new iPad Pro in an Apple Store. I didn't put them up, but now I'm wondering if there's a SIM inside. I want to activate cell phone but don't want to start paying for the service, unless it will be able to be used immediately.
The iPad Pro WiFi + cell comes with a SIM card. Do not activate until you want to.
You happen to be in the United States, and if you decide you want to use Verizon, you will need to get a Verizon SIM (unless, of course, the iPad version, you got was for Verizon). They do not charge for them.
I've only had my netbook for a few days, so I'm not quite used to it again although I am well accustomed to Windows 7. I close the lid to activate the sleep mode, but it is difficult to wake the computer. I often hold the power switch to force a stop down and then restart. Not something I want to do.
I have a mouse USB is plugged and I activated the ease of USB wake up, but nothing works. I open the cover and press the keys, including try a quick press on the power button, but nothing happens. Someone at - it ideas?
I wake Eve mu notebook by pressing the power button.
I n t need to force close down. Just a short time, press the power button to wake up the unit.
In your case I would recommend if a BIOS update is possible.
You should check which version is available on the notebook computer and which version was released. If a newer version is available then update!
I have installed and configured the two and cleaning works. But for correspondence in real-time, deduplication triggers only after outside firstname and lastname are entered (Email ID, address). Please can someone explain how the processes are triggered.
Loading the batch by using list import, cleanup is working but does not. I can't see even duplicate Contacts after the execution of work for DQMgr for the deduplication (lot Contact Match).
Thank you and best regards,
See article 6 of the Guide of Services company:
My NB200 supports 3G, I inserted a SIM card of twins in it and it works well. The GPS also works very well and gives me the coordinates of where I am. However, as stated in the user manual, there is no navigation software installed.
What would be the appropriate software to install on the netbook? Do a search shows me application for mobile phones and dedicated GPS devices.
Thanks in advance for your suggestions.
As far as I know Toshiba doesn't offer any software of navigation, so you need to check navigation applications are available for use with laptops.
Visiting a few forums where you can read the experiences of people who use it and make a decision that is best for you.
All of us have some specific criteria for this stuff and my favorite program doesn't have to be the right one for you.
If you take decision please let us know the one that you want to use. I believe that you are the first person with this issue and it will be interesting to read something about your experiences with the 3 G, GPS and navigation using laptop.
Maybe you are looking for
Hello Whenever I want to open a PDF file, Firefox asks me "that should Firefox do with this file.I opened with Adobe Reader (default) selected and I have the box 'do this automatically... ". "checked. So, it seems to me that Firefox should not ask me
I did the updates of Microsoft Windows, using Windows Update, published Tuesday, November 11 for my HP Touchsmart spectrum 15-400ea. He has since a reboot is a sunsequently could not start and I get a black screen. No attempt to start 'blind' in BIOS
My thinkpad was repaired during the last 2 weeks and I have yet to receive the update. Manual update through the States of parameters of the device is up to date, but I'm still running build 0065. Is something I'm missing here, someone knows it how t
We are currently working on a system of data acquisition for an electric boat. We have a GPS speed sender who transmits the speed of the boat regarding the impulses per kilometre. We can get LabView to detect the input pulses, but have no idea wher
I use Internet Explorer 6 with Windows XP Professional 2002, service pack 3. Can I switch to IE 7? Can I switch to IE 8?