NB200: 92-95% after charging battery

Similar Questions

• Satellite L30 - 11 d - after charging battery, it is said that 8% remaining

  Hello

  I have Satellite L30 - 11 d and the battery will be cooler. Laptop works when the power adapter is connected. When the AC adapter is plugged in the battery icon seems to be charged and the led will turn orange and green then as if the laptop has finished loading.
  However once the AC adapter is removed he says only 8% remaining and will stop in 5 minutes.

  I just bought a new AC adapter, and I updated my BIOS. Very confused on how to solve this problem, any advice will be very useful.

  Thank you

  Hi TL30,.

  In my view, this problem is only related to the battery and it should be replaced. A block can only be recharged about 500 times and after that, replace it because it can t be charged to 100% more.
  It has nothing to do with the adapter BIOS or sector

  Contact a service provider allowed in your country, or you are looking for online shops where you can buy a compatible battery. On your current battery, you will find a part number where you can ask Google to do this.

• local area connection adaptor is not working properly after draining battery

  My computer Windows 7 MSI drained yesterday, and after charging battery and reboot, I have no connection to my wireless router.  In Device Manager, it says "connection of local card is malfunctioning.  I've seen similar problems with this message, but not like what I experience with the battery drain.  If anyone can help, I will be VERY grateful!  Thanks in advance!

  Lisa

  Hello

  Welcome to the community Microsoft and thanks for posting the question.

  According to the description, it looks that you are having problems with the connection to the Local network.

  1. What is the brand and model of the wireless router?

  2. are you able to connect when the wired connection?

  3. What is the model of the laptop MSI?

  Method 1: update the firmware of the wireless router and check.

  You must contact the router support to this task.

  Method 2: To update the network drivers on the computer manufacturer site and check.

  Meet us if you experience problems with the connection to the local network or any other issue of Windows, and I'd be happy to help you.

  Good day!

  Hope this information helps.

• charge battery after installing the new battery does not exist

  I use Windows 7 Ultimate Spk1 32 bit on my laptop (big mistake)
  I recently installed a new battery & put it through the cycles of preparation 3 times following the instructions.
  The next time he went down to the alarm of low level newly together and I added the power adapter, nothing happened, the battery wouldn't charge.
  After many attempts to do nothing improved load, especially my temper.
  They advised me to install another battery which I just did, and this SECOND new battery just sits there & will not charge either.
  When he arrived he had 10% fresh rate showing so I removed the AC adapter and let him draw 8%, but when I replaced the adapter he had served on 8% & does not load.
  What is going on? How a simple thing like recharging simply disappears. ?
  Does anyone have a solution for this problem?

  See you soon
  Geoff

  The charging circuit inside the laptop and recharges the battery while the laptop is plugged into the mains. If the load circuit does not have the laptop is running on a charged battery or the power cable, but won't charge the battery.  The fact that the machine failed to load two new and old battery suggests the charging circuit has failed.

• Satellite L850 - charger / battery problems, not normal...

  Hi all.

  First post and all, I had a glance through to see if I can find my particular problem, and I don't think I can.

  I posted this in another sub-forum, but then realized it's here... oops!

  A L850. It will work fine on battery, but only supplies not the charger cable. Helpfully, a colleague also has an another L850 (I bought two together) so I can charge my battery of separately in his machine.

  If I start the machine on a charged battery, it works fine. If you connect then the power adapter, the led is lit on the front of the machine, but it's clearly not load the machine works until the battery is flat and then turns off and will not turn on back until you charge the battery apart and put it back in.

  Whenever the machine is powered, it also complains that the RTC battery is flat, and you will need to set the time in the BIOS. It is the coin cell CR2032 internally on the motherboard isn't?

  what I don't understand, is that the unit understands clearly that the charger is plugged, as seers to say it is the battery. Except that it isn't, and is not to be unity. Œuvres battery for about 40 minutes of our days, after that, dead machine.

  Any ideas? I suppose that there is something wrong with the internal charging circuit, but the fact that the LED lights up when it is plugged suggests otherwise...

  Thanks for all the ideas.

  David.

  More information on this type of bit. When it is plugged in, the icon on the screen says "Plugged in, charge", but battery icon animates not charging about 10 seconds, then stops, and battery is clearly not charge as % drops away slowly.

  I found a Google one of them is the "remove all, hold for 30 seconds, reconnect power. This made no difference. I also found advice to uninstall the battery from the device manager driver software and allow it to re - install. This done, still no different.

  I got the hard drive and in a USB enclosure to retrieve all my files and am doing the 'factory restore' option I think that this is a restore hard disk partition. This work is far away, but in my opinion, is still running on battery only, so do not know if this is going to end!

• Not charging battery Camileo S10

  Hello
  Bought an S10 and I am very satisfied with the quality and performance when he is married with a class 6 SD card. The receipt first came it that I plugged it in to recharge the battery and the round red record switch. After the inspection being plugged all night as planned to indicate that the witness has no flashes. I used the S10 and the battery ran down and plugged in and again once the light red came on however the battery recharge. If I plug it to my pc, I can read all the files but unplugged, it's as dead as possible!

  I have acquired a similar happened fully charged battery and the same process as the first happened. Anyone has any ideas - it is a defective product?

  Concerning
  Ian

  Hello

  did you remove the insulation on the connections of the battery before charging?
  The red light flashes while recharging the battery? If the charge is complete, the Red led is constant.
  If this is not the case, there seems to be something wrong with the electronic charger.
  Recharging works only with AC charger provided.
  Camcorder must be disabled.
  Clean the battery contacts.

• Satellite L300D begins only after the battery has been drained and recharged

  I have a satellite L300D that has a problem at startup. Last week, it closed but got stuck on the "Disconnect" screen for a long time. Finally I manually turn it off by holding down the power button. Don't think no more of him it happened sometimes with my computers. However, when I went to turn it back on - it was nothing. Power lights came to the front of the computer, but not to screen at all. Could not even access the BIOS. Nothing. It was like that for several days.

  Tried all the common solutions - removed battery, disconnect the power supply and press the power button - still nothing. Tried w/o - just AC, just the battery. Even stripped down to the motherboard to see if I could remove the CMOS battery and reset the CMOS but it is soldered on the motherboard. Put all back together, still nothing.

  Finally, I had to recharge my cell phone using a USB adapter and given that the computer had power I tried the usb port and it worked (for example, I could charge the phone - still no screen on the computer). The computer's battery is dead and I plugged it in. That evening, after the battery was full, I tried the computer and it has perfectly worked. Started correctly, shut it down, restarted and it was fine. Unplugged this night there and reconnected again in the morning and... nothing. Just a black screen. No BIOS.

  Killed the battery again then reloaded and now my computer is working again.

  Any ideas on what could cause this problem?

  Thanks in advance.

  Hey Buddy,

  In my opinion her only the only one you can is update the BIOS like Akuma suggested. This problem is not related software so that s the only option you have I think. You can download the latest version of the BIOS here:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  If this is not the case, contact an authorized service provider please. Guys can fix all this hardware related problems can diagnose this problem. Maybe the motherboard or something else must be exchanged.

  Good luck! :)

• Flashlight to 9810 blackBerry Smartphones won't start after charging?

  Hi guys,.

  Put my 9810 on charge at 16:00 Sam, (batt was @ 40%) that came out tonight here.

  Came back to 19:00 ready to go out, 9810 has been turned off, red light blinking (on 10 seconds, off the coast of 30 secs)

  and the phone will now start not at all!

  Tried all the suggested advice, battery pull, the hard reset, even the trick 4hr 15 min battery charge.

  Swapped batteries with son 9800, (was 100%) still nothing, (my battery worked 100% on son 9800)

  so not the battery problem.

  Have now tried reloading the OS using "application loader" and "BBDM" following the instructions in the two KB10144

  & KB27956. Each time, the process goes smoothly and seems to start the process of reloading, "load JVM and system software" except for the two programs 'hang' to "reconnect to JVM" (to wait for the initialization section of the device) I get a dialog box with

  "Application loader failed to connect with your device. Reconnect your device and try again"

  No matter what I do, I can't get past this point! Battery, or back makes no difference. A point of failure is always the same!

  Now also tried "BBSAK" but this not acknowledge the phone at all, then at least Loader application and BBDM would 'See' the phone when required according to the instruction.

  Did not add anything new to the phone, & last updated was months ago, and nothing has changed for the problem, the only charge battery as I have done thousands of times without any problem...

  Am currently resorting to an old phone without installation of BB and unable to access the backups on phone no BB!

  Desperately need help of any kind. 9810 obviously out of warranty now and it is uncertain whether repairable or not! Really need to get this phone up and run again, or get something better than what I use to present...

  Hi and thanks for the quick response, which confirms what I thought, a little after the attempt thorough I made to correct the problem...

  Have you contacted a company that specilises in BB repairs, (not local, but well recommended) they want £30 ($50) courier phone them for diagnosis, before they will quote price for a repair, depending on what is wrong with it. They also specify that if additional problems were discovered, then the price will change accordingly.

  My personal thought is that the main motherboard is foobard, or the ROM needs flashing, which is a lot of money. (there is really only 2 boards inside them, (if you've never disassembled one, not too bad a job!) more separate commissions, screen/slider and keyboard/trackball)

  As 9800 go around £40 ($70) and 9810 for £50 ($85) it seems to me that it might be false economy, try to get it mended, where I can get another for almost the money of diagnosis.

  Shame, because the phone was great before the 'crash' and maybe good for other parts, screen, case, keyboard, battery, etc.

  Might go this route of buying a 2nd hand unit and sale on spare parts recover some of the money...

  Is there anything common to the most recent BB, as had similar "Crashes" with son 9800 and an another 8900 but these were recovered with OS resets, but never happened with the biggest? models (8310/8700)

  See you soon

• BlackBerry Smartphones stuck on 'low battery' with a fully charged battery

  I have a Blackberry Curve 8330, I have had for years and never had any problems with it.

  But today, the battery is dead even if I loaded last night, I thought a little weird.  Came home, plugged into the wall, but although it recognizes to be connected with the little zig - zag, he is not required to load.

  I think that "grateful" is a better way to phrase it.  I put the phone battery from a friend, who fortunately has the same model as me, and his recognized the same battery as being almost fully charged phone and had no problem, but when put back in my phone, it says "low battery", guard the radio is off, and as soon as I unplug the wall adapter, the phone stops due to low battery.

  Tried with its battery too, recognized both as low battery.  She apparently is not the batteries or the charger or the actual usb port, and I am at a loss what to do.

  I have not downloaded applications, or updated the operating system during the weeks, so I don't know why you would choose now to start doing this.  Does anyone have an idea of what is wrong, and what I can do about it? Or is my blackberry doomed?

  Well, after the one on the desktop without the battery in it, it started fine this morning with a fully charged battery and is fine.  Hoping that he'll be fine next time I try to load it.

  Problem is at least temporarily resolved, thanks for the suggestions of things to try.  At least she stopped me from throwing my phone something = P

• Palm Pre crazy symptoms: 'phone in offline mode', won't charge battery, won't start, message error "an error has occurred that cannot be resolved.

  This is a long description of a series of problems with my new Palm Pre. You can search text to find your specific problem. There is no solution in my post. Looking for possible answers in future responses.

  I bought my Palm Pre 4 days ago and it arrived 2 days ago. Phone was working fine. Last night I plugged the phone and updated the operating system. After, I've selected "Done" and went to bed.

  -First set of questions: 'Phone offline', will not charge battery.

  In the upper left corner of the phone, there is the message "phone offline. Although the phone was in charge all night, it reads "battery of 26%. I called the general number of on the Sprint tech support and we tried the following things:

  (1) the phone reboots (press on and hold the power button / stop, then select 'Disable'. After setting down, hold down power button / power stop.)

  (2) to reset the phone (several ways - call tech support so that you do this properly)

  The individual Sprint and then sent me to another tech support person, likely to level 2.

  -Second series of questions: message error "an error has occurred that cannot be resolved;

  #2 Sprint tech support person had me also to restart and reset the phone in a number of ways. In his own words 'we tried all the palm pre stuff I know' and whenever the phone was insensitive. Often, we received the message error "the phone is in offline mode. We did a full erase and after that the phone will not re-start is no longer. At this point, the error message came up saying "an error has occurred that cannot be resolved" that referred me to www.palm.com for assistance. I think it's important to note here that this was not the typical error message (black screen with white letters) but rather the blue sky with a translucent box on background with white text.

  #2 Sprint tech support person then me connected with the support of the Palm and the dance continued. Yet once, we tried a whole bunch of reset and restart and the erasure of the options. Palm support asked me to go to: www.palm.com/rom to download WebOS Doctor, which I did. I downloaded the file. Although that was the case he had hold the button "volume +" and connect the phone to the charger. This caused a USB symbol will appear on the phone. When the record was complete, I got an error message which could not run the file. Palm tech support person seemed surprised. I mentioned that I was on a Mac and he said he couldn't help me. He me transferred to another person from Palm support that works with Mac users.

  Palm #2 tech support person advised me that I should have selected the download option 'mac' on www.palm.com/rom. I verbally walked him through the series of Web pages, telling him it is said that you need Windows (any version) or Mac (whatever version), but that at no time was there a possibility to download another WebOS doctor for different operating systems. After an exchange of views over she told me that she would have to have someone call back me tomorrow.

  -Third series of questions: phone stuck on the USB symbol.

  So for the moment, the phone is completely useless. Not fantastic. I started the mac on Windows 7 and downloaded WebOS Doc and received the same error message. I also ran Windows Vista virtually and received the same error message. Later this afternoon, I head into work to try the same thing on Windows XP.

  In the meantime, I got on this forum and found a thread that has provided a direct link to the necessary file:

  Palm.CDNetworks.net/Staging/ROM/webosdoctorp100ewwsprint.jar

  After downloading this file, I realized could totally be a virus, I was able to get WebOS Doc work on my computer. It took that I recharge the phone before, and now it's on the screen that says 'do not disconnect your phone' and the full file of 3%. Only... it was completed for almost 30 minutes to 3%.

  I hope that Palm will follow-up with me tomorrow, but I'm leaving on a business trip at 7:00 and I would love to have the thing work. All suggestions are welcome, even if you can just tell me how to get her think disconnected safely before my flight tomorrow. I want to get through security with my phone plugged into my laptop.

  Thank you.

  I picked up the phone at the local Sprint store and the sales ago replaced the phone. They were unable to understand what went wrong and, essentially, has declared a complete failure of the unit. I'm sorry that I'm not able to offer better news, but I hope that this info is useful to you.

• My iPod does not not after charging for hours

  My ipod does not not after charging for hours

  More details would be helpful please. What have you tried to do? What you are experiencing?

• Connection charger not charging battery

  connection charger not charging battery

  "Connecting to the charger" - do you mean the adapter?

  The phone load using a computer USB ports?

  Have you tried a different adapter?

• I have an Acer 1810tz-4008 and computer won't start battery. New charged battery - what should I do?

  Original title: the battery starting

  I have an Acer 1810tz-4008 and computer won't start battery.  New charged battery - what should I do?

  Hello

  Check with support from Acer.

  Acer - USA - Service and Support - drivers
  http://us.Acer.com/AC/en/us/content/support

  Acer - worldwide
  http://www.Acer.com/worldwide/selection.html

  ===================================

  Other information that might help:

  References to Vista also apply to Windows 7.

  Check with support from the manufacturer of their books online and the drivers and their forums system
  (as applicable) for known issues. Some manufacturer issued BIOS and other updates to help the battery
  problems.

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  =================================================================

  Other information that might help:

  Control Panel control - plan change Options - power plans - power - advanced settings
  Parameters for the drainage and the use of parameters (this is how much to use and not how much or how)
  long to load).

  In fact, what causes a lot of wear on a battery empties it too low on several occasions. With today
  systems overload are not a problem.

  Here are some tips to help and troubleshoot battery issues.

  Old battery? Unplug the power to the computer - remove the battery and clean the contacts with a pencil
  eraser (do not use this, if your battery is fine slots - just clean up the edges of the knife which fit in)
  them and be careful). Batteries are old, or it could be a problem with the computer.
  Check with the support of the machine system, and many of them have on line forums.

  New Lithium-Ion type battery usually last longer if you do not unload their less than 30%
  However on a laptop that not extend their life a lot. Best is to use the a/c adapter
  When this is possible.

  I use the free version of BatteryBar to monitor my battery. Click on the green button on the
  Yellow box on the right side of the page to download the latest stable version.

  BatteryBar - free version available
  http://osirisdevelopment.com/BatteryBar/index.html

  Another good program

  Vista battery saver - free
  http://www.codeplex.com/vistabattery

  Problems with the lives of its use and the battery of power - Mr Fixit
  http://support.Microsoft.com/GP/windows_battery_power_settings

  You can also check with the manufacturer of system and forums that many use their own
  proprietary software to monitor the battery and they could be known problems with your battery.

  ============================================================

  Battery meter: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/battery-meter-frequently-asked-questions

  Battery saver
  http://Windows.Microsoft.com/en-us/Windows7/conserving-battery-power

  Solutions to common battery problems
  http://Windows.Microsoft.com/en-us/Windows7/solutions-to-common-battery-problems

  What is the precise the battery meter?
  http://Windows.Microsoft.com/en-us/Windows7/how-accurate-is-the-battery-meter

  ============================================================

  Try this - to make a Restore Point

  How to create a System Restore Point in Windows 7
  http://www.SevenForums.com/tutorials/697-system-restore-point-create.html

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  Then Control Panel - Manager of devices - Batteries - Double click on each item - drivers - tab
  Update the drivers (which can do nothing) - then do a right click and UNINSTALL each - RESTART
  who will update the driver stacks.

  Problems with the lives of its use and the battery of power - Mr Fixit
  http://support.Microsoft.com/GP/windows_battery_power_settings

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Probook4540s: 87% charged battery, won't start not computer.

  87% charged battery, won't start not computer. When power plugged in and started it shows not charging. If I remove the power cable, stop immediately.

  There are several complete responses with the steps to follow, which I did. Finally a new battery of bouht and considers the motherboard bringing not at not charge. The sending of the stack of return for credit.  Will just have to use with the power supply.

• Re: using hp pavilion 15 and it says plugged in not charging battery

  The testing and calibration of the battery link (http://support.hp.com/us-en/document/c00821536) is for Windows 7.  Our PC has Windows 8.1.  I tried on the advice of anyway, but it seems holding down the home button while restarting can no longer pull the PC in safe mode.

  How about a reference for W8 and one for the W10?

  Hi @jenolanjim ,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems, with the help of the community! Thanks for the information on the links.

  I stumbled upon your post on the laptop and wanted to help you! I saw your question about your 15 HP Pavilion Notebook and need information about your system to charge battery. Here is a link to do this for Windows 10 and Windows here 8

  If you need, here is a link to test the adapter. The same goes for any version of Windows.

  Here is a link to the computer in Safe Mode , if you still need it.

  Hope this helps you.

  Thank you.