NB200 - battery indicator shows the life of the battery in percentage
Hello
Someone had this problem?
My (Windows and also the PM from Toshiba) battery indicator does not show remaining battey in minute but life only in percentage.
is this correct or there are some strage parameters in power setting menu?
Thank you
Mine did the same thing, it's just how it is in XP. But I think the Vista energy saver indicates the remaining time.
I think you'll need to download a battery of Internet utility to display the remaining time.
Tags: Toshiba
Similar Questions
-
How to show total pivot in value only and percentage only column
Hi all
I want to show the PivotTable by percentage of column only (no value), but the total in value only without display of percentage.
How to do this?
Thank you
LingHere it is 2 different approaches:
(1) is something like
Bike = $253 M = 20% = 27% = 53%Extract columns as
Product, region, dirty, dirty---> region is for values(East,West..), % and other sales is for Total as below
for the first sale exp: ((sales*1.0) /sum (sales by Product)) * 100.0--> column format and the percentage value
for the 2nd sale exp: sum (product sales)In the pivot table
Columns and product sales (2nd) online
Region to columns
% Sales to measures(2) you can go with Bike = 20% = 27% = 53% = $253 M
Use a cast as exp: cast (sum (product sales) as char)
If you are not agree with any of these just wait for our Guru David_T. You can get the best solution...
Published by: Srini VIEREN on 28 January 2013 23:50
-
BlackBerry BB Z10 Z10 stops when the battery indicator shows about 35%
Z10 BB stops when the battery indicator shows about 35 percent without any warning. Does not illuminate until the charger is plugged. Immediately shows charge remaining 40% +.
Please advice.
Stephen
Hello
Here is a solution I tried after lookng through various forums and type of works for me. A common thing in most of the solutions is to take the battery and sim card out, leave like this for 1-2 hours and put them, I found back in and turn it on. I'm not sure of the logic behind it, but I remember reading that this overshadow the phone battery problems (connected incorrectly - essentially a reset) and begins to charge.
I tried it 2 days back and I see that it worked for me, at least until now. I cross my fingers.
I hope it's useful, works at least for few of you.
Thank you all for the suggestions.
-
Why don't the LOCKING of upper CASE indicator showing when the button?
Why don't the LOCKING of upper CASE indicator showing when the button?
A CapsLock indicator should be part of installation Win7 OS normal and here's why. I use a brand new Microsoft Wireless Keyboard 2000 s/n 0356100416937. I can send you a photo or the retail sales receipt if you doubt this statement. It is there no CapsLock indicator on the keyboard itself, probably to extend the life of the battery. I also use an IOGEAR KVM switch to facilitate the transition between multiple computers. Emule KVM switch a keyboard of 102 standard keys, so even if I load the last Ko-driver (MS Intellitype 8.2) the pilot reports Microsoft keyboard not detected. Therefore, there is no way to determine when the CapsLock key is active. If you have ever tried to enter a long password upper-lower case with the CapsLock key in the wrong state, so you can imagine my frustration with this keyboard.
So, how do you display CapsLock indicator?
REMOTELY, HP TECHNICAL SUPPORT TOOK ME AND MY 520TOUCHSMART AS I HAD AN INDICATOR OF CAPS LOCK ON MY SCREEN, NOW HE IS GONE. I GAVE THEM MY MS OFFICE2010 CELA: NOW I FOUND SOMETHING ELSE. I LACK WILLINGNESS TO CONTACT OF COURSE FRIDAY. IF I FIND A SIMPLE SOLUTION TO MY PROBLEM, I'LL POST IT. SOMEONE HAS AN IDEA?
-
HI there I'm using iphone 4S with IOS 9.2.1 beginning indicating battery wrong percentage anybudy knows how to fix this help please me
Please explain exactly what you see. If the phone stops simply by showing a relatively high load, then it's quite possible the battery is bad and must be replaced.
-
Satellite C50D - PC Health Monitor shows the low battery
I bought a C50D a few days ago and noticed that when I ran the PC Health Monitor he showed the wear of the battery as poor. I tried a few full charge/discharge cycles and it does not seem to have improved the situation.
Is this something that is likely to correct itself in the next a few charge cycles or could I have a duff battery - the health monitor is not too well to evaluate the battery charge.
Ian
New batteries must be charged and discharged several times in line to achieve the best performance.
I'm not quite sure how many times you have to repeat this procedure but I recommend you monitor the battery working time m.
Of course, battery working time depends on the use of the laptop, but you should be able to see the improvement.
-
I just plugged my new keyboard magic and it doesn't seem to be a battery level indicator in the system preference/keyboard. There is on the Magic mouse, but not on the keyboard. Any ideas? El Capitan V 10.11.2
And what has this to do with the Pages for Mac?
Peter
-
My battery status shows the service battery. I have reset the alert status about 6 months ago, but he will not be reset again. Thinking I need a new battery Apple!
Batteries are no longer available on the Apple online store but can be at your nearest Apple Retail Store, you must check with your store. A better option is probably buy one yourself and replace it. Buy a quality like this http://eshop.macsales.com/shop/apple_laptop/batteries/MacBook_13_Unibody battery
Avoid imitations cheap as those who are sold on auction sites.
-
Two places of charger and different threads. The phone appears with a black screen, only this time with a RED bar to the left, showing the horizontal (usually green inside status bar) symbol which indicates a REALLY low battery and a NEW symbol for what looks like a power outlet under. See photo. Phone was unusable, while it is plugged. I pressed the two buttons necessary to reset and nothing happened for several minutes. While I put the phone down for a while, then only made the Apple logo appeared in a reboot. Surprised it took at least a minute or two to turn it back on. Clues as to what it all means? Or was - this all simply SO sink for battery charging that it adds this symbol of the additional card on the screen?
You hear the sound of loading when you connect the phone to the computer or adapter?
Leave it connected to the adapter for at least 30 minutes, then check again if the battery charge during this time. Before you connect, make sure that the docking port is free of any debris or lint build-up, which may prevent it from loading.
The phone is recognized by iTunes if you connect it to the computer. You use the original adapter and USB cable provided with the phone?
-
My indicator shows only the first line of the string
Hi all
I'm having some trouble with chains, could you help me?
I use a device connected to my computer in a RS-232 port.
I configured the VISA series correctly. When I write a command to my device, the answer is something like this:
"XXXXX."
YYYYYY
2222
44444
WWWW.
The problem is when I try to read this response. The channel indicator shows only one line at a time every single loop. And the other orders received are stored in the buffer until their time to be displayed to come. I mean:
In the first loop device XXXXX responses.
In the second loop the device responds YYYYYY but now I stored what must appear:
2222
44444
WWWW
XXXXX
YYYYYY
2222
44444
WWWW
In the third loop, the device responds 2222 and stores again:
44444
WWWW
XXXXX
YYYYYY
2222
44444
WWWW
XXXXX
YYYYYY
2222
44444
WWWW
How can I configure my blocks to display the full string?
Thank you
Murilo
Post your code and we can better understand what is happening.
My first is however you spend only the corrent, reading of the indicator.
You use a chain shift reg with a knot to concatenate a String?
Your zip code and we'll have a glance.
-
LC - E6 quickly shows the flashing orange light. Will not charge the battery.
The charger that comes with my new 5 d Mk III LC - E6 battery could not operate right out of the box. Would not load my new battery, nor any of my other Cannon batteries. Amber led flashes quickly.
The old LC - E6 charger supplied with my EOS 7 d charging these batteries normally.
I updated the scrapped charger delivered with my 5 d Mk III, and bought a new LC - E6 B & h. This unit has the same question. Sometimes it will load some of my batteries of Cannon, but more often the clear amber, after 20 seconds of just flashes quickly and will not charge the battery. My old charger LC - E6 Bill still all these batteries in normal mode.
I use brand Canon LP - E6 batteries in these cameras.I followed the instructions found in the owner and guide online the site of Canon USA to charge the battery. The batteries are relatively new and show the good working condition on the information panel of the menu camera camera battery. These units (LC - E6) never worked properly.
Tim,
AC power removed normal home. All high-tech devices are functioning normally.
As for replacement by Canon, I don't have the original invoices for this item, so I'm just going to buy another.
Thanks again for your contribution.
-
Whenever I try to access my printer to print a document, it goes through the indices of normal routine but in the end, it shows the number of the DOCUMENT to print.
Original title: printer
What kind of printer do you use? You use the latest drivers on the manufacturers website? Where are you seeing the printing error DOCUMENT No.?
-
Kodak camera - Win 7 always shows the battery in 10%
A few weeks ago, I bought a camera Kodak Z990. I noticed some weird behaviors with the 'Z990 Digital Camera' windows that open when I connect the camera to my laptop to Windows 7 via USB.
- The taskbar displays two instances of the Z990 digital camera window - icon pop up for one is a peak of the camera, the other is a thumbnail of the current window. By selecting either to start from the taskbar displays the same window, and close the window causes the two tiles of the closing taskbar.
- By clicking on the link to import the photos and the video is ineffective. It is necessary to double-click on the link. The interface would lead me to believe that a single click should work.
- The most important for me - the descriptive text at the top of the window ALWAYS shows the status of 10% battery, regardless of the actual condition of the battery.
I've already updated the camera the latest firmware available.
Is there something that can be done on the side Windows of the things to address these questions, or all them are the result of driver from Kodak, and a solution can only come from Kodak?
Thank you
Steve
In my opinion, you should contact Kodak regarding this issue.
-
How to view the status of the battery power of the screen of boot menu showing the tiles?
How to view the status of the battery power of the screen of boot menu showing the tiles?
Just do the gesture of "drag the right edge" which evokes the "charms" on the right side. It also brings a great left low Panel with date/time, battery level, and State WiFi icons. No need to clutter up the screen with him all the time. ;)
-
current-time indicator shows all the way
As I updated my version of After Effects to 13.5.0.347 I don't see the current-time indicator spans the time line. This makes it difficult for me to know where to cut things.
See the screenshot.
Any help?
The update of the corrections after effects CC 2015 (13.5.1) is available, which corrects this problem: http://adobe.ly/1Il5JYe
Maybe you are looking for
-
Support for OpenPGP smartcard instead of the primary password
What about adding support for OpenPGP smart?You can change the password to 'simple' by a card authentication chip OpenPGP (required to decrypt the stored passwords). Best regardsArmando
-
Update the BIOS to 6.40 blocks a Satellite P855-102
Hello everyone, on 7 December, Toshiba has provided an update of the BIOS to P855 series. The old version of the update of the BIOS 1.90 and suddenly there was a 6.40 available for download... I checked the compatibility of more than twice and all (i
-
I just received the following email sospetta che più. the tanto per informare community pubblico. E. B. 01/04/2016 Dear client, Grazie I nostri recent news di sicurezza e diversi attempts di frode in 2015 (anno della prevenzione delle frodi) individu
-
I have two X 61 laptop, a bad display with bad card system. I would trade these two poster. Are there service manuals to help me get started?
-
A project is not import dependence projects any transfer using the Desktop Manager
One of my projects have been dependent on two other projects and those dependencies are kept in the generated files .alx so. But, if I transfer the claim referring .alx files using Desktop Manager, its not actually transfer the other two dependent pr