NB200 - C000021A error and blue screen appears

Hi people, I have the following problem with my notebook of mothers a Toshiba NB200 - 10g. Basically it was a virus or a virus a little these days. Downloaded avg and malwarebytes in the hope of resolving and it has problems but pop ups were still appearing and found virus.

In any case today he will be present when starting to move the party to boot windows he's going to where the login screen would be the screen flashes blue for the blink of an eye and the C000021a error message comes back on unrecoverable system error and computer stops and restarts x 1000

I have read a bit about this problem and seems to be down to the fact winlogon.exe will be missing or corrupted by the virus. I tried all different modes start safe mode, last config etc. known. My major problem is I have no usb key to load anything on and the laptop doesn't have a CD player, so my options are very limited. Next plan will have to be to take it to the store tomorrow and get them to run a windows recovery program, but the problem is that I end up having to lend him my laptop tonight. Is there something I can do at all? Tried F2 and f12 to get into the bios, nothing that I can change. No joy, tried f8 and all start different modes. Do I have other options at all?

Thank you

Just to add, by pressing and holding 0 and then let go when it switches is supposed to be to get it to reset the good that happens the HDD RECOVERY at the bottom of a blank page for a second about XP tries to start again? Seems a little odd.

Advertisement

Hello

Obviously, you can't do anything else as to reinstall the new OS.
Maybe HARD drive recovery would still be available on the HARD disk. So try this HARD drive recovery.
This Toshiba HOWTo might be useful:
http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=58

If the recovery of HARD drive is not available, then you could try to reinstall Win XP using a disk from Microsoft as part of the USB key.

Here you can find more information how to create a bootable USB key.
http://wiki.EeeUser.com/windowsxpusb

Good luck

Tags: Toshiba

Similar Questions

  • While to my desktop screen; the error on blue screen appeared... STOP: Ox0000000c5 (Ox00000002, Ox00000001, Ox00000004, Ox805515A1)

    Original title: in my desktop screen. the BSOD appeared...

    Hello everyone,

    While to my desktop screen (don't remember if I was doing anything however), the BSOD appears, indicating the system stopped to avoid any damage occurs.

    The following was then shown (exactly as you see):

    STOP: Ox0000000c5 (Ox00000002, Ox00000001, Ox00000004, Ox805515A1)

    Then a memory dump has been launched.

    The only way to get rid of the blue screen was to unplug the computer from the power source, then turn it back on.  After reboot, "error reporting box" appears asking if I wanted to report this error to Microsoft I did), then closed the box.  Almost immediately after, the computer I connected to the Internet to a site that says "Microsoft error report" in the upper left corner of the screen.

    Then, there was some additional information about the page displayed on some system functions in my computer does not.  I was directed to click on a link to the so-called "Roxio...?  & then asked to download, "Pxengine 4_18_16A.exe(Provided by Sonic Solutions, version 1.13.37.0, created on 20/07/2009).

    This is now a 5th time a blue screen appeared during 5 days.  This time, the only difference is in the codes and being redirected to the page described above to download something I've never heard of and have no idea of what it is supposed to do.

    I would appreciate any information that someone has just what it is.  I'm simply puzzled.

    Thank you very much in advance!

    Hello

    1. don't you make changes on the computer before this problem?

    2 do you have software Roxio installed on the computer? If so, then Uninstall the software and check.

    You can also check if the problem persists in the clean boot state.

  • conmputer crashes and blue screen appears and the computer restarts

    my computer guard crash blue screen appears and then the computer restarts, reinstalled windows xp and the problem persists

    If you reinstalled Windows, then you can be sure that it is hardware related.

    The three most likely culprits are the processor, graphics or RAM card. Unfortunately exactly identify the problem will always be tricky unless you have access to the spare parts that you can switch to turn.
    Neil
    www.nwarwick.co.UK
  • Error on kernel stack inpage error and blue screen

    (Note: this post was created on behalf of another user.)

    Recently, my PC had blue screen errors.  Thinking it was probably a problem of aging HD, the HD has been replaced and a new install of Win XP Home Edition with Service Pack 2.  Blue screens persist despite the new drive.

    The error is a "Kernel Stack Inpage Error".

    It is a new drive with the same errors as before so I think that it is not a virus and probably a problem with another piece of hardware.  There is a minidump file available if need be.

    Can someone please help with these errors?

    Thank you.

    If you would like to get BSV and run it, then choose:

    Options, lower pane Mode, all the drivers

    You'll be on your way and see the battery and your ATI drivers.

    Updates Microsoft released the second Tuesday of each month (Patch Tuesday) so it would be on 07/12, but since you have SP2, I can't say what would happen or what updates you decided to install.  If you have accepted the recommendations of MS for video drivers (which are usually poorly), who knows what is happening.

  • Re: Can't do and blue screen with the recovery tool

    Hello

    After I start my computer, leaving the office, but I can't do anything, everything freezes!

    I tried the recovery (with F8) tool and it starts, but after a while the bluescreen apears.

    Can someone tell me what is the problem?

    Thank you

    Hey,.

    What laptop, you have exactly and blue screen appears exactly?

    If disk HARD recovery doesn't work you should try the Toshiba Recovery disk recovery facility.

  • problem on Windows vista 32-bit: blue screen appears and the system reboots automatically when you work

    signature of the problem:

    problem event name: bluescreen

    OS version:6.0.6001.2.1.0.786.3

    Locale ID: 16393

    More information about the problem:

    BCCode:10000008e

    BCP1:C0000005

    BCP2:94B525C6

    BCP3:9BA92C14

    Product information

    Product number: NC646AA

    Series No.:CNX9030FZ9

    HP Pavilion Slimline s3560in desktop PC

    Hi mkm.

    Were there any hardware or software changes made at the time the blue screen appeared?

    I suggest to close the PC and remove all devices in addition to the screen, the keyboard and the mouse.

    If the computer works without a blue screen for a reasonable period of time, you can start to add them one at a time to see if a specific device that is causing the error back.

    Chris
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Why a blue screen appears during installation of Windows 7 and not setup any OS?

    Dear support team,

    I have a Compaq Presario model: CQ3132L; Product ID: NY682AA-AB4 and serial No.: CNX00304C2. Today, I had a problem while giving a configuration with windows 7 Ultimate. A blue screen appeared and the error code was: 0x0000007B. There is a link below which shows the exact screenshot I encountered during the installation. I need a solution as soon as POSSIBLE because my PC died and I can't spend a single day without her. Thanks in advance

    link: http://komku.blogspot.com/2010_02_27_archive.html

    Enter the BIOS by typing /holding F10 key to power on. Check if the hard disk controller is set to AHCI or IDE mode. AHCI mode should work, but if it's the current setting, change IDE. If it is set for RAID on AHCI change.

  • When I connect broadband connection. a blue screen appears with error driver_irql_not_less_or_equal

    When I connect broadband connection. a blue screen appears with error driver_irql_not_less_or_equ

    . DMP files ar bellow:

    https://onedrive.live.com/?CID=BF931C2E054B2BA5&ID=BF931C2E054B2BA5%21105

    Original title: driver_irql_not_less_or_equal

    Accidents were not conclusive.

    BugCheck D1, {29, 2, 0, fffff880018b9f2a}

    Probably caused by: ndis.sys (ndis! ndisXlateReturnNetBufferListToPacket + 2 a).

    Follow-up: MachineOwner

    DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
    An attempt was made to access an address pageable (or completely invalid) to a
    application interrupt level (IRQL) that is too high.  It is usually
    caused by drivers using a wrong address.
    If the kernel debugger is available, get a stack backtrace.
    Arguments:
    Arg1: 0000000000000029, memory referenced
    Arg2: 0000000000000002, IRQL
    Arg3: 0000000000000000, value 0 = read operation, 1 = write operation
    Arg4: fffff880018b9f2a, address memory

    Debugging information:

    Update your network drivers, preferably from the support page of the manufacturer of your computer, which is strangely not available at this time. If you can't find a version update at Dell, try Realtek, linked below

    Identification information of the machine [of Smbios 2.3, DMIVersion 35, size = 2590]
    BiosVendor = Dell Inc.
    BiosVersion = A11
    BiosReleaseDate = 30/11/2006
    SystemManufacturer = Dell Inc.
    SystemProductName = OptiPlex GX520
    BaseBoardManufacturer = Dell Inc.
    BaseBoardProduct =
    BaseBoardVersion =

    OptiPlex GX520

    http://www.Dell.com/support/home/us/en/04/product-support/product/OptiPlex-GX520/drivers

    Note: This machine is pretty old and I see no driver support beyond Windows XP.

    Image path: \SystemRoot\system32\DRIVERS\Rtnic64.sys
    Image name: Rtnic64.sys
    Timestamp: Fri 30 mai 11:12: 23 2008 (48401957)

    Description of the driver: Realtek Ethernet NIC driver

    Driver update site: http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=7&PFID=10&level=3&Conn=2

  • I get an error on blue screen ATI2DVAG infinite loop and am looking for a suggested solution for XP.

    get an error on blue screen ATI2DVAG infinite loop and I am looking for a suggested solution for XP.

    Hello jvecc,.

    Thank you for visiting the Microsoft answers community.

    This problem is caused by a defective unit or a device driver. Visit the website of the manufacturer of your computer or see if AMd drivers directly will work for your hardware configuration and then uninstall and reinstall your drivers.

    Hope this helps Chris.H
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • blue screen appears and a physical memory dump _

    After a few minutes the blue screen appears and a dump of physical memory followed by the model turned off.
    How to solve this problem?

    Hello

    We really need more information to help you troubleshoot the BSOD - BlueScreens.

    Check this thread for more information on using BlueScreenView, MyEventViewer and other methods of
    Troubleshooting the BlueScreens - top 3 answers.

    http://social.answers.Microsoft.com/forums/en-us/w7repair/thread/c675b7b8-795f-474d-a1c4-6b77b3fcd990

    Please post BCCode or Stop Code and all information that you can collect to help us to help you.

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • HP elite e9160f had compatible windows error/process stop notice and blue screen freezes.

    HP e9160f Vista Home Premium running is compatible notice of error switch Windows and blue screen freezes.  Any suggestions?

    I went ahead and ran the HP disks to reset to the factory settings and loaded Windows 7.  No problems now!  Thank you for your help and persistence.

  • Satellite P20-771: Error Message blue screen after the reinstallation of the OS

    I have a portable Satellite P20-771 / Pentium 4 3.40 GHz (800/HTT) / XP Home / 17' with nVidia Geo5700 driver.

    As I had a few problems with the software, and I reinstalled everything using the supplied CD. Unfortunately the canned computer malfunction sent me blue screen errors, which are due (it comes when I sumbit error to Microsoft) to device drivers. I've updated everything (I hope) of the Toshiba page, but I'm not an expert and I'm worried that I missed something or that something has not been loaded in the right order or that the parameter is incorrect.

    I thank in advance for your help

    Roberto

    Hello

    I read in this forum that the Blues screen error message appears due to hardware malfunction or malfunction serious software.
    Usually after installing the new OS since the portable Toshiba Recovery CD should work properly.
    It is not easy to say why the blue screen appears on you laptop.
    Maybe you can post the content of the error message in this forum, and maybe we will find a solution.

  • Error IRQL_NOT_LESS_OR_EQUAL blue screen

    Hello

    I just bought HP Pavlion dm4 1209tx and I get an Error IRQL_NOT_LESS_OR_EQUAL blue screen. It occurs usually when I play music or watch videos. Initially the system will just hang, then the blue screen appears. I'm just a beginner so any help will be greatly appreciated.

    Thank you!

    I was able to update the driver, thanks to you!

    So far, the system is not suspended yt or givng me a blue screen. I really hope that I won't get any more problem.

    Once again, thank you!

  • Error on blue screen "Unmountable Boot Volume" after about 8-10 minutes after trying to start in laptop with Vista

    Hello

    Have a Toshiba laptop and lately in the face of this problem. After posting the "Loading Windows" screen for about 8-10 minutes, the blue screen appears with the message "Unmountable Boot Volume".  This screen is observed in all safe mode options.  Using the system repair option also gives the same error screen...

    Also, I removed the hard drive and fixed it again. but same problem is observed.  Laptop has only the product recovery CD.   What are the options?   Please suggest...

    Thanks in advance,

    REDA

    try the system restore but restore it back before what is going on has begun

  • ATI2DVAG error: loop blue screen infinite

    I have VAIO VGC-RA840G Windows XP Media Center computer that is having a blue error screen. When you try to start, a blue screen appears saying driver ATI2DVAG is an infinite loop and it restarts again. I can only boot the computer in Mode safe.

    I booted safe mode and use the VAIO Recovery Console to recover C drive. It seemed to be successful until the second reboot - error repeared. It seems to graphics card (ATI Radeon X 300, on the map: EAX300Le-A334C) is a failure.

    What graphics card can I use to replace this card? When I place a new graphics card, how can ensure me that the VAIO recovery software don't not worth and try to change the driver of the old card?

    Thanks in advance for your help.

    Hi Merrill,

    Try to perform the system recovery once more and check if it works by following all the steps here: http://www.kb.sony.com/selfservice/documentLink.do?externalId=C268210

    If the problem persists, contact Sony Service support here: http://esupport.sony.com/US/p/service.pl

    Installed on your computer video card is ATI RadeonX300 size 128 and Type DDR SDRAM. You can use a new graphics card with the same above indicated. First, remove the preinstalled a x 16 PCI Express Slot graphics card and install a new one that does not have the power over 364.7 wattsmax. / 100 - 240V ~ 7A (50 / 60 Hz).

    Note: If my post answered your question, please mark it as an "accepted Solution".

Maybe you are looking for

  • How can I configure extract of Message in this latest version of Thunderbird?

    Used to be able to put in place a command something like extract Messages selected on one of the menus at the top. You set up and when click on the menu option send the attachment in the folder that you identified. I had this set up in the previous v

  • Satellite Pro 4340: need driver sound

    Hi people, I need to for the Toshiba Satellite Pro 4340 * Sound Driver *, please! System: Win Server 2003Sound card: + Yamaha Native DS1 Audio Codec +. (I'm loking on google but without suxes). better compliance

  • HP Photosmart C7180 all in one: does not connect

    Help! My C7180 All In One Wireless printer won't connect, I trouble shoot error code: 0x803C010B rises. This printer is 9 years old. Its been having problems printing as point by point when I copy it scans then prints point by point. However, when I

  • ADR 3.0 without Apex?

    Hi allI have a general question about ADR. My environment is ADR 3 more Oracle 12 c:1. I've read that you can use ADR 3.0 without installing Apex, which means that I can just install/config ADR on the level of database without having to install the A

  • Necessary troubleshooting after you rename the parent folder

    Recently, I renamed some files from the month to the 00 month (i.e. from January to January 01) and moved this month RAW files in a subfolder for this shoot.  The bad news is that I forgot to do in Lightroom!  Usually I choose a photo, update its loc