NB200 laptop cannot boot from USB CD/DVD drive / blinking cursor

Similar Questions

• ProDesk G2 SFF 600 HP: HP ProDesk 600 G2 LTS cannot boot from USB or DVD

  We have 50 HP ProDesk 600 G2 SFF pcs and we need to install Windows 7.i can't boot from usb or DV.

  Please can someone advice me what to do?

  Thank you.

  Hello:

  We must go into the BIOS, turn on legacy mode and disable secure boot to install W7.

  Then you must also run this tool to set the USB3 drivers in your W7 usb flash drive.

  https://Downloadcenter.Intel.com/download/25476/Windows-7-USB-3-0-creator-utility

• C50-A634 satellite will not boot from USB or DVD

  My new toshiba Satellite C50-A634 won't boot from usb or dvd,.
  I downloaded victory 8.1 and burn the image to a dvd but I always get an error message "no boot... device please restart."

  Can you please help?

  Hello

  Startup mode of the change in the BIOS settings and you should be able to use the optical drive as first boot device - http://aps2.toshiba-tro.de/kb0/TSB2C03F80002R01.htm

• Satellite 5205-s705: How can I boot from the CD/DVD drive

  I can't run Setup from my cd/dvd rom, there is no such option in the BIOS Setup. How can I boot from the cD or DVD?
  Please, help me!

  Hello

  You are not able to boot from the CD/DVD drive?
  If you are unable to change the boot order in the BIOS, I would advise you by pressing the F12 key immediately after starting the laptop.
  A start menu should appear, then you should be able to choose the reader of CD/DVD (ODD).

  You can also try clicking on the C instead of the F12 button. The C button the STRANGE start.

  Check this back and forth!

  Good luck

• Boot from the CD/DVD drive

  Hello

  I had Windows XP on VMware Workstation 8.  I would like to use Parted Magic to change the virtual machine disk partition, but he needs to boot from the CD/DVD drive.  When you start the virtual machine, I would like to start from Parted Magic of the CD/DVD drive instead of starting in Windows XP?  How to change the boot sequence so it starts on the CD/DVD drive?  Thank you.

  Fan

  on the most modern machines, it is impossible to hit ESC or F2 in time for usually, I add the line
  bios.bootDelay = "5000".
  to my config.ini

• J2V78UAR #ABA: cannot boot from Usb when window 10 is installed on the laptop...

  Recently I bought the new laptop HP AMD E1-2100 unfortunately I Format C drive and install the new window 10... Now I have installed window 10 but I do not use the window 10 because it is not perfect as window 8 or 8.1...

  I want to reinstall window 8.1 Bootable USB on my laptop but it does ' t boot from usb even I changed the Boot order... IE

  USB floppy disk hard key/Usb

  USB CD/DVD drive

  OS boot manager

  Network card

  Please suggest me what I do?

  A key USB bootable you have created by recovery media creator?

  Go into the BIOS, use the tab of the System Configuration.

  Enable Legacy Support.

  Plug the USB key into one of the usb ports.

  Press the F10 key to save the changes and exit.

  Now, press the F9 key to select the first boot option.

  You should see the USB key as one of the options if it is in fact a bootable flash drive.

• Can't boot from USB or DVD. HP Pavilion g6 - 2257sr

  My new laptop HP Pavilion g6 - 2257sr doesn't let me boot from USB device.

  The laptop computer startup, I pressed ESC and F10. Then I put in place the order of startup UFEI - USB-device / DVD / OS selector.

  I use the official Windows 7 disc and several own USB devices with bootable images.

  But rebboting use OS hard drive provided.

  Help, please. I want to delete the current operating system on my laptop.

  Hello:

  I have a set of recovery first disks before continuing.

  To start the PC, you must go into the BIOS and enable the legacy mode.

  Then you should be able to boot from another device.

• Re: Satellite NB10T-A-101 - cannot boot from USB key

  Hello

  I bought a new Toshiba Satellite NB10T-A-101 and want to improve performance by changing the HDD with a SSD and install windows Pro 8.1.

  However, I am unable to boot from USB, it always mention:
  + Reboot and select proper boot device or insert boot media in selected boot device and press a key. +

  I already disabled secure, used 5 + usb startup different sticks (work fine on other laptops).

  Can you please tell me what the approach is to change the HARD drive and then boot from a USB bootable (UEFI).

  Thank you.

  Hello

  Laptop Satellite NB10T-A-101 was equipped with an Intel CPU 2810 n which is part of the new Intel Bay Trail-M platform.

  This new technology Intel Bay Trail allows installation of UEFI capable systems:
  Win 8 or 8.1 Win

  Just a few questions:
  Have you already changed the HARD drive to SSD drive?
  If so, the new SSD is recognized in the BIOS?
  Have you tried to boot from the USB flash memory stick 8.1 Win until you changed your SSD drive?

• Satellite A100-991 - cannot boot from USB device

  My Satellite A100-991 (MS Windows XP MCE, SP3) does not start from a USB key or USB hard drive. The same USB devices are bootable if they are connected to a desktop computer or a laptop from other manufacturers. I put the USB as the first boot device and use an image "Bart PE" on my USB device.

  In fact, I have installed 2.10 Phoenix Bios version and I wonder if I could update the BIOS by using the 'sa105v21.exe' program and that this would resolve the startup problem.

  Hello

  Have you tested different USB keys? I think that your current USB key is not compatible
  Also test the USB to different USB ports. A port may be defective for the computer to start t with him.

  Theoretically, you can try upgrading the BIOS but don t forget s a bit more risky and it should be the last step.
  Prior to this, load default settings in the BIOS and check if you can boot from USB.

• HP Pavilion 15 laptop: Need help, PC laptop HP Pavilion 15 could not boot from USB external hard drive.

  My desktop HP Pavilion P7-1074 4.5 years computer dropped last week. Planed to get a replacement on Black Friday or the day after Christmas. But I have to run some programs inside hard drve to the desktop computer. So I have attatched hard disk dive from my desktop to my laptop HP Pavilion 15 USB port with an enclosure.

  The laptop would recognize the external hard drive as a SYSTEM (F 62.2 MB of free space of 97.9 MB, OS (GTB-free 1.11 of 1.35 TB and HP_RECOVERY (H 1.33 GB free of 11.0 GB.))) But I couldn't find the program I want to run.

  I went into the BIOS to set the boot order to boot from USB first, but I could not get the result I expected. The laptop still start on its own hard drive. I tried all three USB ports, no one works.

  Could someone help me please?

  Thank you very much!

  Hi @db69613,

  Welcome to the HP forums! It's a great way to engage, ask questions and find resolutions by working with specialists from the community of HP. I understand that you need assistance with your desktop computer HARD drive that is connected to your laptop via the USB port. I'll be happy to help you with this.

  I'm just surprised at the levels of technical knowledge and technical skills that your possession. Hats off to you for this. It was very clever of you! It has been a privilege to have shared this platform with you and work with you.

  First of all, programs of a different version or windows session will not work on another computer as it was installed on the computer of origin at this time. It is an installation and application software, to the difference of the data or information that is accessible by any computer when the hard drive is connected. It is because no software installation binds the application of this specific operating system installed on this specific to the time machine.

  If the computer does not and the hard drive is accessible, all the content (such as music, photos, videos, and other information are accessible), but the programs have been installed originally are not available and will not work on any other computer when it is connected to the outside.

  However, if the hard drive works fine, windows is correctly installed, then the same hard disk can be installed on another PC of office and some of the programs should work ideally.

  I hope this helps! Please let me know how it goes. I really hope that the issue is fixed without hassle.

  To simply say thank you, please click the "Thumbs Up" button for appreciate my efforts. If it helps, please mark this as "'Solution Accepted". " If you need more assistance let me know and I will gladly do whatever I can to help.

  Please take care now and have a wonderful week ahead.

• Satellite A100 PSAA8E: Cannot boot from USB after Bios Update

  Hello

  I downloaded the latest bios (v6) for my satellite a100 (psaa8e) and after the update of the old bios, I noticed that I can not boot from USB. Is there a way to restore the old bios or will this problem solved?

  See you soon
  MB

  And before you can update the BIOS you were able to start the bootable CD from the external optical drive USB drive facilities?

  To be honest I really don't believe it. Try to connect USB FDD and you will see that the FDD is recognized and you will be able to use it as first boot device.

• Pavilion 11 x 360: cannot boot from USB

  Hello

  I can't boot from the USB flash or disk ext USB HARD drive. How can I change the boot order?

  BR,

  Mohsen

  Hello:

  Also enable the legacy and disable start-up secured from the BIOS, save and exit the settings, continue loading Windows.

  http://support.HP.com/us-en/document/c03653226

  Plug in usb, stop.

  The system restarts, then change the order by pressing f9 to start, start save and exit.

  Try restarting the system to boot from USB.

  Concerning

  Visruth

• Satellite R10 - ACPI BIOS Version 1.30 cannot boot from USB Thumb Drive

  I'm trying to recreate the image on this laptop, but the script I use is on a USB key, how can I boot from this device?

  >... the script I use is on a USB
  Sorry for the question but what do you mean with script?
  You have created recovery USB support?

• L50-A-1FK satellite - cannot boot from USB port

  Hello

  I am a first user of this forum
  It is a problem with my computer and don't know how to fix it.

  My computer is a L50 A 1FK Satellite with Windows pre installed 8.1.

  I'm not impressed with new Windows10 and I'm back on Windows 8.1.

  What to do when I start to install a version of Linux Mint meadow look.
  It is impractical to restart the computer to. Al dough BIOS is changed by marketing, that to look for start-ups to the USB. It does not work. If I try the same thing is happening with a live CD or DVD.
  How can I make sure that there re-boot on the USB.

  As in advance,
  Rob (Wildspoor.nl)

  Hello

  In order to boot from external sources (CD or USB port - flash memory stick), you need to disable startup secure in the BIOS.

  There is also a startup mode option (UEFI).
  In case the new (Linux) system would not support UEFI mode, you must change this mode of CSM.

• Boot from USB or DVD with UEFI bios upgrade

  Hello

  I have an Alienware Aurora R4. I am trying to upgrade the BIOS A03 to A05. My system uses the UEFI boot loader. I have problems starting in anything except through the windows.

  I tried to make a bootable USB flash drive with both the HP disk storage format tool and Rufus using the win98 and FreeDOS as the operating system. The bootable flash drive is recognized when I do F12 and I chose to start. It goes straight into windows.

  I tried to boot from the drivers and utilities disk and once again, he is going directly into windows.

  In my BIOS, I value UEFI then CD/DVD the HD device boot order and still it doesn't start from one of these devices.

  Is it possible either due to UEFI? If I understand correctly this is a 64-bit application and will not recognize any OS 32-bit like BACK. Is this true?

  What I have to go into the BIOS and change it for a legacy instead of EUFI start-up and if I do this will I have no problem starting after I do the upgrade of BIOS and return to EUFI?

  Thank you

  Mike

  I think that you have solved your problem.  If you need boot from a USB device, it will boot UEFI information appropriate unless your BIOS has an option to return to the start-up inherited automatically.

  Updated the BIOS normally resets the configuration to the default configuration for the computer.  If you are unable to update the BIOS, you will need to look through the BIOS configuration page to ensure that your settings are correct.  I would not be surprised if the first parameter you have to do to come back to the UEFI boot mode.