NB200 - upgrade the RAM and install Windows 7?

Hello to you guys.

I'm back and received the news for you. I got my new Toshiba NB200-10Z. I would like to ask you:

What are your comments on the upgrade of RAM? The difference is notable? It worth the cost?
What RAM memory slot I'm supposed to get? And what is the maximum memory I can update?

What are your ideas on installing Windows 7 as the only operating system OR to have both on different partitions?

Thank you all in advance

Hello

Just one question: you have a new laptop and why you didn t consult the user manual?
I ask this because in the user manual, you can find all the information on the upgrade of the RAM.
In my opinion RAM upgrade is always useful because the RAM modules are cheap nowadays and with 2 or 3 GB, you have enough RAM for applications.

Regarding the issue of Windows 7 you can install it if you want, why not? You can do what you want with your laptop, but I prefer the pre-installed version of XP at the moment because Windows 7 isn't on the market yet.
If you want to install you need extra partition for it.

Tags: Toshiba

Similar Questions

  • HP 110-243wb desktop PC: can I upgrade the ram and memory of my HP 110-243wb desktop PC?

    Can I upgrade the ram and memory of this HP 110-243wb desktop PC? What suggest you and you thank in advance.

    What did you find?  Was it a 8 GB module?  Two modules of 8 GB is the MAXIMUM.

    Yes, this is why I suggested the part numbers.  You have to match pairs.

  • Satellite A200 - 1 MB-Question on upgrade of RAM and installing XP

    Recently bought a PC laptop toshiba a200 - 1 MB.
    It came with a 1 GB of ram (512 + 512 DDR2, 667 Mhz).

    I want to move the ram to 2 GB, is it possible to add RAM by keeping the originals in place?

    In addition, I want to replace Vista with XP, it is possible to do. The product recovery cd came with preinstalled in vista. Can I install the drivers from the recovery cd and install xp separately.

    Thank you

    The two locations are already occupied.
    If you want to upgrade the RAM you have to remove a module.

    You can upgrade the RAM up to max 4 GB (2 x 2 GB)

    You can use the DDR2 667 MHz (PC2-5300) 200 - PIN SODIMM

    > Also, I want to replace Vista with XP, it is possible to do. The product recovery cd came with preinstalled in vista. Can I install the drivers from the recovery cd and install xp separately.

    This is possible. You need to install the XP from your original CD of Microsoft. XP drivers can be found on the Toshiba page

    Best regards

  • Satellite L655 - 14 d - upgrade the RAM and sound card

    I have the Satellite L655 - 14 d there 3 GB RAM, I would like to know if I can upgrade the RAM if yes how? I would also like to know if I can add a card his 5.1 or 7.1 internally or externally without problem.

    Help, please

    Hello

    Sound chip is part of the mobo. Impossible to upgrade this or replace this part.
    You can use an external sound card, but I put t know how it will work in your laptop.

    Regarding the upgrade of RAM;
    Yes, you can upgrade the RAM.
    Check the user manual and extra, you can consult this section of the forum:
    http://forums.computers.Toshiba-Europe.com/Forums/Forum.jspa?forumid=114

  • I upgraded the ram and wish to have access to more than 3 GB, so I'll need to install Windows 7 64 bit

    Original title: Aero

    Yes please

    As the 32-bit drivers won't work not on Windows 7 64 bit is very important that you check that the 64-bit Windows 7 drivers are available for all your equipment (not only devices such as printers) before you upgrade. The Windows Upgrade Advisor is a useful starting point, but to be sure to look on the Web site of the manufacturer of your PC, or to defect, the manufacturer of the equipment.

    Presents a useful set of FAQS:

    http://windows.microsoft.com/en-us/windows7/32-bit-and-64-bit-Windows-frequently-asked-questions .

    It is possible to install Windows 7 using a flash rather than on a DVD player. Please see:

    http://windows.microsoft.com/en-US/windows7/installing-windows-7-on-a-netbook .

  • Can Tecra M9 - I upgrade the RAM and get a Windows 7 recovery disk?

    Hello!

    I want to know if it is possible to upgrade my Tecra M9 about RAM - memory? I think that I now have 2 GB.
    I also need to know if Toshiba sells a recovery disk to my computer with Windows 7, or do I have to buy a Windows 7 disc and serch for drivers on my own if I want to have the new operating system?
    My language on the portable computer setting is Swedish.

    Cordially Mikael

    Hello!

    I also put t know how much RAM have been mounted, but I checked the Tecra M9 user manual and it can be upgraded to 4 GB of RAM. This means that you need two modules with specification of SO-DIMM DDR2 200pin for upgrade. In the user manual, you can find some information about it.

    On the issue of Windows 7, I think that Toshiba will not release a Windows 7 recovery disc because this model isn't Windows 7 supported:
    http://APS2.toshiba-tro.de/KB0/KBA9A02PX0000R01.htm

    You can install Windows 7 from a Microsoft disc but you will have to collect the drivers on different websites or other, you use the Vista drivers.

    Welcome them

  • How to remove the BONES from the system and install windows 7

    I had two OS on two two different drives, vista and windows 7 by mistake my brother to the format of the other readers on which windows 7 has been installed without knowing that... so I had to start my laptop by reinstalling windows 7 on the disks by replacing Vista... now at startup, there are two options to choose the OS but only does not work (the new windows 7 I have installed). Is it possible to uninstall both Nos. While one install windows 7 on a disk...?

    Hello

    You have to format the drive that contains the former system of operation of the new plant in disk management and is should not appear more.

    or

    Re-format both drives and install the clean image of windows 7, you can format the two disks of windows 7 (click on the Advanced icon) install menu. then continue the installation.

    or

    In windows 7 Type MSCONFIG in the start menu to run the System Configuration utility. the button remove the tab "Boot" the is no longer necessary OS entry.

  • Unable to do port forwarding, to connect to the VPN and install Windows updates

    first of all, I tried to launch a minecraft Server trying to port forward, had problems with this, so I tried Hamachi, wouldn't connect to the VPN, then I tried Tunngle, at least, it was more useful, so I tried to use Device Manager to search for tunngle found when trying to manually install it, then he said that he could not or invaild something (or something of the sort) then it says windows may need to be put updated to fix this problem, so I tried to update to windows and it will not be updated, he is stuck at 0%, I tried the thing to download the patch to update windows and that has not helped,): I DO

    Original title: Windows Update will not be blocked at 0%

    Hello

    Thanks for posting your query in Microsoft Community.

    Depending on your problem troubleshooting to establish a VPN connection, I recommend that you post your question in the TechNet forums. TechNet is watched by other computing professionals who would be more likely to help you.

    TechNet Forum

    http://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w8itpro

    Hope this information is useful.

  • I have a linux operating system and I would like to remove it and install windows xp. I'm afraid that if I wipe the drive, I'll be unable to boot the windows xp disc. Is this true?

    I have a linux operating system and I would like to remove it and install windows xp. I'm afraid that if I wipe the drive, I'll be unable to boot the windows xp disc. Is this true? What is the best way to remove the linux operating system and install windows xp?

    original title: HOW I CAN UNINSTALL LINUX OPERATING SYSTEM

    If there is absolutely nothing on the disk you want, just format the drive and install Windows XP:

    1. start from the CD. You may need to change the first boot to a CD device in the BIOS. To do this, when you switch on the look for a configuration message indicating what key to start typing, F2 and del are commonly used. The message appears for very long and it you miss, you have to restart the computer. In the BIOS, look for a section that contains the boot sequence, change it to CD, save it and let the computer to restart.

    2. the installation sequence is answering the message press any key to boot from the CD, and then press ENTER to set up Windows, press F8 to accept the EULA, delete the partition, press ENTER, type L to confirm delete, type C to create a partition, choose (Quick) format. Then begins the installation and restart will therefore ignore the subsequent message to press any key to boot from the CD-ROM.

    3. actual installation will begin and takes about 30 minutes. Finally, download all the missing Windows service packs and other updates.

  • Change Partitions and install Windows 7 Ultimate

    I have 2 GB of ram & when I bought my Sony laptop, I got Best Buy Geek Squad partition my 150 GB C:\ drive to have a G:\ and H:\ drive partitions. I want to remove or delete partitions G:\ & H:\ and C:\ use all of the 150 GB less space reserved for shadow copies of backup.  Disk Mgr, I cannot extend the C:\.volume. After I develop C:\ I want to upgrade Vista Ultimate to Windows 7 Ultimate, or install a full version of Windows 7 Ultimate, regardless of the method will work best... All my data is backed up & I have all my DVD software if I have to reinstall all my programs.  What is the simplest and most accurate procedure to implement these two changes? Aka VDS disk management won't allow C:\ to extend its volume in the free space of 50 GB. For some reason, backups of photos take almost all C:\ 100 GB with free space only 1.45 even after I have remove all except the most recent backup.  I am very frustrated and if I knew how, I would go in the BACK, rub everything and load Windows 7 Ultimate full version and start all over again, but I don't know enough to know if it will work.  I appreciate your instructions... Thank you.

    Since you have backups of your user files and your programs can be installed again, the simplest method is the one that is most likely to lead to a stable system of Windows 7 for long distances. Boot from the Windows 7 DVD. Use the facilities on the DVD to remove all the present partitions. Next, install a new Windows 7 system hard disk. Once completed the installation stage, let the system updated with all the security and update other Microsoft offerings. Then, install your programs, and copy backup your user files.
    It is also possible to boot from the Windows 7 DVD and use its facilities to remove G and H. Then you can develop C to fill up the drive and install Windows 7 on C.
    There are tutorials on Details he to do that and other options on the web.
    Tom Ferguson

  • Satellite L70-A-139 - guaranteed zero when removing the cover for the RAM and HARD drive

    Hi all

    I have a Satellite L70-A-139 youcef.
    And at the back of the laptop, there is a cover that is fixed with a screw.

    Wil I void the warranty when I unscrew and take a look?
    I want to upgrade my HDD to SSD.
    The motherboard supports Sata III: D.

    Thank you!

    No, the mandate must still be valid.
    There is a removable cover at the bottom of the unit as shown here:
    [Toshiba Satellite C70 / C75 / C70D / C75D / L70 / L70t / S70 / HARD S70t drive replacement procedure | http://aps2.toshiba-tro.de/kb0/CRU3703HG0000R01.htm]

    Then you should be able to upgrade the RAM and HARD drive.
    I think this info should be mentioned in the user manual too.

  • Can I upgrade the memory and the graphics card on Satellite A60

    Hi all..
    I have a satellite a60 652.
    I want to improve it with new ram and graficcard.
    can I use more than 1, 5 GB of ram? later with an update of the bios?
    and if I can change the graficcard? If the answer is Yes... What is the best card I can actually use?
    or is there a map which is almost a geforce 7600 or 6600 (or ati 9700) I can use?

    Thank you for the help
    Ingo

    PS excuse my English ;)

    > I want to upgrade the ram and the new graphics card

    Upgrading RAM is possible but the graphics card is unable to be updated!

    If you want to upgrade the memory you could update to 1536 MB max.
    The A60 supports 512MB internal memory and it is so that one memory slot where the extra RAM module can be inserted.

    These modules are compatible:
    PC2700 512 MB (PA3312U - 1 M 51)
    1024MO PC2700 (PA3313U-1M1G)

    Concerning

  • No bar of tasks or cursor after replacement of the HD and install Win 7

    After a hard drive failure, I replaced the drive and installed Windows 7.

    After that Windows Update Setup, I don't have a taskbar, start button or the cursor of the mouse.

    I have only access to the desktop in safe mode. Any help is appreciated.

    Rob

    What exactly was the disc that you used to install Windows 7?

    Have you tried to format the drive and reinstall Windows 7?

  • Upgrade the RAM of Linux4.5 database server!

    Hello

    We have the machines Dell 2950 (1 GB RAM) with Linux4.5 OS installation oracle10g R2 (10.2.0.1.0).
    We want to increase the RAM from 1 GB to 4 GB.

    So, what are the steps to upgrade the RAM and what is the effect of the increase in RAM on the database server active
    and what are the changes that we do?

    Thank you
    Faziarain

    But after 4 GB of RAM, which is the swap area?
    In general or swap area recommended should be 1.5 or 2 RAM physical.

    Kind regards
    Taj

  • I have upgraded to Windows 10 64 Pro and all my apps Adobe has stopped working; I get the popular "MSVCP110.dll is missing" issue; I uninstalled everything, including the creative cloud, rebooted the PC and installed it back again! Same thing! I tried thi

    I have upgraded to Windows 10 64 Pro and all my apps Adobe has stopped working; I get the popular "MSVCP110.dll is missing" issue; I uninstalled everything, including the creative cloud, rebooted the PC and installed it back again! Same thing! I tried this several times. I'm really stuck! Can someone help with how this is solved; I follow online (two solutions) and tried both; not good! No matter what I do, I get the error! The rest of the applications say they are absent from the other files like this; It seems that there is something to do during the installation that keeps this issue alive!

    Run the command to check the file system once:

    https://support.Microsoft.com/en-in/KB/929833

    Also repair Microsoft Redistributable packages from the control panel > programs and features.

    If not installed, download and install the Visual C++ 2013 package.

    Let me know if you need more assistance.

Maybe you are looking for

  • HP Pavilion dv6-6023tx graphics drivers

    [Form of base system] Operating system: Windows 7 Home Premium - 64-bit (Service Pack 1) (Vivid RAM) memory: 4 GB Processor: Intel (r) CPU of Core i5 - 2410M to 2.30 GHz [Issue details] I have recently been becoming more frustrated about why I have s

  • Updating video card - computer crashing

    I am very computer illiterate so need help "basic"... I have for two months had hit a regular number (every day) with my computer blocks an hour after it started, the message always reads that video card expired need to upgrade. Can someone give me p

  • Button mute Microphone of Lenovo X 220

    I recently had to reimage my laptop with Win7 Pro 64-bit. I installed all the drivers listed, but still somehow my microphone mute button does not work. It lights up for a second at the start, but after that it will not repsond. Any suggestions?

  • bluetoothe does not not on HP 14-d106TX with windows 8.1

    Hello I have recentlly bought a new computer laptop 14-d106TX of HP. I installed all the drivers from the HP site. But the bluetooth is not working. It does not detect any of my devices bluetooth, or my phone or my headset. Please help me solve this

  • I have the desktop with the privilege of spending to Win7. How can I do this?

    I have Compaq Wintodws 7 upgrade privileges. How can I go about it?