NB250 - error creating recovery media

Similar Questions

• N5P48UA #ABA: error creating recovery media

  I started my creation of recovery disks and did not have the correct DVD.  I stopped the process without throwing step of engraving and close the application. Now, I have the correct DVD and the custom of system I would all disks. None of the recovery disks have been created, but the system says I did. How can I tell the system to continue with the original game?

  Hi @gmercer,

  Thank you for your query.

  I take that when you tried to create your recovery media, you do not have the correct DVD and you stopped the process. Now that you have the correct DVD, you are no longer able to complete the process, because it indicates that you have already made one. Please, contact the HP support and explain your situation. They will be able to help you. Please contact HP to Contact HP Supportassistance.

  To express the gratitude of my post please click on the "Thumbs Up Icon'." "  If my post solves the problem you are experiencing, please click 'accept as Solution' to help others find what worked for you!

• Cannot create recovery media

  Attempting to create a recovery media for my new laptop Toshiba L-500; I get the following error message:
  {Cannot read the following file.
  D:\ZZImages\ZZImages\PREINST13. STORMWATER MANAGEMENT
  (Code d'erreur: 020150-20-00000000)}

  This has happened while creating recovery disc 1 and disc 3... with the same error message. considering that the Recovery Disk 2 was created without any problem.
  I tried burning the files again for discs 1 and 3, which could once again, but 2 disk has been created again successful without any problem.

  Please indicate the possible solution.
  (4.7GB//120Min//16X used transonic DVD-R) to create Recovery Media Creator Toshiba recovery disks)

  Try to use TDK or Verbatim DVD-R. I used these empty discs to create recovery discs on several different Toshiba laptops and every time everything was fine.

  It seems crazy, but you may have problems using some some discs.

• Need help with the recovery partition/create recovery media

  HI - first thing I did when I got my thinkpad is a clean install of w7, but then I thought about it and restored the recovery partition, conviniently located at the end of the training, in order to create a backup dvd factory. Thing is, when I click the autorun (lenovoqdrive.exe) and select 'create recovery media', I get an error stating that "program files (x 86) \lenovo\factory recovery\recovburncd.exe" is missing... obviously since the operating system partition was crushed.

  I tried RnR and looked on the software + drivers page and nothing happens as "... \lenovo\factory recovery\" when it is installed. So, where can I download the program that creates the recovery discs?

  (I know possible to restore the operating system of the *.wim file but I want to leave that as a last resort).

  Okay here's what I did to who mightve had the same question: as mentioned earlier, I have restored the partition Q with (your favorite free partition recovery tool), then booted from a usb winpe (with imagex) generated from victory aik (free).

  first I deleted (from winpe boot usb) windoze partition with diskpart and recreated the 2 partitions S & C (and Q is on the left) by hand according to 'recovery.ini' found on q. then I restored S and C 'sdrivebackup.wim' and 'cdrivebackup.wim', respectively, using imagex.exe, which is actually two one liners.

  Finally, I tried the bcd to fixation by hand according to "bcdinfo.txt", also found on Q, but that did not really work... so I just jumped into a bootable win7 USB and he rewrote the bcd by itself (I assume). the last step has been fixing the mbr by using /fixmbr and /fixboot bootrec.exe.

  ATM I started just and afaict it behaves exactly like the first start-up of the plant. see you soon

• HP 15 Notebook - r063tu model: what quality of Flash drive required for creating recovery media for laptop 15 HP (r063tu)?

  I want to create a recovery media for my laptop HP 15 (model r063tu) on a Flash instead of DVD drive (had a bad experience with the DVD in the past). Should I buy a 16 GB or 32 GB of capacity 3.0 USB drive. Because it will only be to create recovery media, obviously I won't be able to use it for other purposes, so want to buy everything as this is sufficient (and save on costs!). Thank you.

  Hello

  32 GB is necessary because the recovery partition is almost always about 20 GB or more.

• Envy 15-ah150na: create recovery media - does not recognize a 32GB kingston generation 3 data traveler flash drive

  Hello

  I have tried to create recovery media on a clean formatted FAT32 drive Kingstone (32 GB 3 generation) flash and keep giving me the message that the flash drive has insufficient free space.

  Tried after formatting the 32 GB again and the same message, tried the NTFS file system and still the same.

  Pending a solution please. Thank you very much.

  Best wishes

  LF

  Official response with the support of HP on twitter:

  Try to use the tool of media recovery. http://windows.microsoft.com/en-us/windows-8/create-usb-recovery-drive. The USB has a boot device.

  .. who has worked on the same USB stick 32 GB .  BUT it is not the same as in the HP Recovery Manager.

  Don't bother more. I accept the foregoing as a solution.

  Good luck with users who have this laptop. Also issues with the network adapter to which I am trying to fix at the moment.

• creating recovery media after upgrade to 8.1 window

  Hello friends. I have a lot of confusion. I bought a laptop on December 2012 with window 8 preinstalled and created the recovery media about 6 or 7 months later. And now, I upgraded my system to window the window store 8.1. And now again I would create a recovery media for windows 8.1. So my question is if I create recovery media on a flash drive usb and if in the future I want to reset my pc or reinstall my system, I'll make window 8 or 8.1 on my system. I'm not a computer expert. If anyone can help me please. Thank you.

  Hello:

  You will get Windows 8.

  If you want to do a recovery W8.1 image you can do the following...

  You can create a system image in W8.1 and save it on a portable hard drive or set of DVD as you might in W7.

  Instead of making a bootable cd as in W7, you need a boot flash drive boot. You can use a flash drive to very small capacity (256 MB) for the startup recovery W8 flash player.

  Check out these links for more information.

  Create the image of the W8.1 system:

  http://www.hanselman.com/blog/CreateACompleteSystemImageBackupWithWindows81AndFileHistory.aspx

  Create bootable W8.1 flash player to access the system image.  Don't forget, you can use this drive, you can boot from it and access the system image you created on DVD or a portable USB hard drive.

  http://anewdomain.NET/2013/09/13/create-USB-recovery-drive-Windows-8-1/

• VAIO SVS13A290X cannot create recovery media

  Hello everyone!

  I have just bought a SVS13A290X, win 8, vaio care 8. Just after I tried to create recovery media, but I couldn't.

  There is no possibility to do in vaio care. He do not have a restore option, but not the option to create a recovery media (sic).

  I went to the Sony esupport site and there is an old video on how to create a recovery media. But it does not match the real software.

  I did all the updates with windows 8 and the sony software and nothing has changed.

  Anyone else had this problem with this model PREMIUN SVS?

  Caesar

  Uninstall and then reinstall vaio care and updating

• Envy TouchSmart laptop, 15 - create recovery media stuck please insert one of the following media

  Envy TouchSmart Notebook PC 15 - 8 64-bit Windows - create recovery media stuck on "Please insert one of the following media" - USB Flash drive or any optical drive found. She just keeps spinning a small wheel. The USB Flash drive is inserted and its light flashes.

  Hi, new Cheryl, I spoke with HP support. There is bad news and good news. They does not solve the problem with the process, they don't even try to. They just said that they embarquerions me a flash drive already created recovery media, without cost to me. If the problem is not resolved, but it is resolved. Thank you for your help, it is greatly appreciated!

• Create recovery media requests double layer DVD

  Good evening everyone.

  I just took delivery of my 5 new books for new employees of my company.

  3 of these notebooks are HP Probook 450 G2 (REF: J4R69EA)

  (These are the models with 128 GB SSD drives)

  The other two are Lenovo E540 with similar specs.

  So let's start, create recovery media. To ensure that is done before I give them to end users in question.

  While trying to create the windows disk, the program "HP Recovery Disc Creator" requires the double layer DVD: "Please insert a DVD double layer to move forward."

  The DVD in question that I use are discs of "Sony DVD + R 120 min / 4.7 GB" that in the past have always worked. (and now work for Lenovo laptops)

  Searching this forum told me to:

  http://support.HP.com/us-en/document/c03481733

  Unfortunately, this is not the same interface I. I choose only a drive to create a backup to

  (in this case, it is drive F:\ internal drive)

  I also tried an external DVD burner with the same results.

  I have not tried a USB, but this isn't what I want, and since you can create a backup set.

  Link to a screenshot: (you must copy paste in your browser apparently)

  http://loxsvc.netau.NET/HP/HP%20Discss.PNG

  It would be not that big of a problem if there was a real windows 7 key printed on the laptop.

  If I had a key, I would just reinstall the machine immediately with an image clean windows 7 so I don't have to clean up all of the HP software.

  but unfortunately this is not the case. So I need a Windows 7 recovery disk must be created.

  Any suggestions apart from the purchase of DVD DL?

  Thank you for your time

  -Sven signed

  Hey @SCamm,

  To get your question more exposure I suggest you post in the trade forums since it is a commercial product. You can do it at Business Forum.

  Record double layer DVD-R and DVD + R discs can store much more data. DVD + R DL, also called DVD + R9 are what is needed to create the media recovery on this laptop.  Sorry to say.

  Thank you.

• Impossible to find in the Menu to create recovery media ThinkVantage programs

  Hi all:

  I'm doing a product recovery disc for my Type 8380 - 85U Thinkcentre. desktop computer.  The help file says to go to Start --> all programs --> ThinkVantage --> to create recovery media to do this.

  I did, but there is no option in the menu of ThinkVantage to create recovery media.

  I need to know what the real app is only the tip of the shortcut to.

  I called the Tech Support line and told to search for and download document Outphasing-67520.  I have done this and downloaded the Lenovo systems Toolbox which told me to provide me with the utility to create the recovery media.  I installed the Toolbox systems and create product recovery disc was not one of the functions that this app provides.

  Can anyone tell me the name of the file and if possible the location of the executable file that indicates the shortcut in the menu create recovery media.

  Thanks in advance for any help getting this done product recovery disc.

  Best regards

  Michael, W1RC

  Hi Netnubar:

  You WROTE:... the executable file is "RRMedia.exe".

  Thank you. You are right.  My problem is solved.

  Wonder why two of the IBM support people didn't know that.

  Best regards

  W1RC

• Satellite C70-A-13D: cannot create recovery media - error 02016e-3 c-0000000

  Hello

  I am creating a recovery flash drive on my new laptop satellite c70-a-13d windows 8 operating system and get the following message

  differences between the files following z\recovery\install20.swm target path e:\\zzimages\zzimages\install20.swm (error code 02016e_3c_0000000

  and the recovery disc creation end not any ideas what is wrong ive tried to do a few times - the flash drive is a toshiba transmemory 16 GB uhybs-o16gh

  Any help would be appreciated,
  I'm reluctant to buy the discs just to have the same problem with them also!

  Try please create recovery DVDs. A few empty drives are cheap. If the same problem happens again I recommend you to contact the nearest Toshiba service provider in your country and explain the situation. It's not your fault, and maybe you will get new free recovery disk.

  All don t delete anything on the HARD drive.

• NB300 - error creating recovery USB stick

  Hello

  I just bought a NB300 and have now tried twice to make the Recovery Media Creator with a 8 GB USB and it totally destroyed two sticks of memory new!

  I followed the instructions, it gets to the bit on formatting the memory stick then comes up with an error with the creator of media software and then close the program.

  Memory sticks are then useless and won't reformat.

  Everyone knows this problem or have any ideas?

  Hi pedrochellie,

  I doubt that the recovery media creator has destroyed your new USB
  You find the USB key in Windows disk management? If Yes, delete the current partition to this topic and create a new.

  In addition, you should test another brand of USB. Maybe they are incompatible I have good experiences with the Transcend USB keys.

  If you have an external RATING, try to create a disc.

• Satellite Pro C660-111 - error creating recovery DVDs

  Hello

  I am trying to create recovery discs to aid Recovery Media Center to Toshiba for my new Satellite Pro C660-111. However, I have tried three times now and it gets about one-third through the first of two discs and comes up with the following error:

  Missing E:\Boot\bcd
  (Error 020123-F1-00000000 code)

  Help please! What I am doing wrong?

  Thank you very much
  Franki

  Hello

  What kind of blank DVDs that you use to create the Toshiba Recovery disk?

  Maybe the error is related to the disk, I used DVD - R Verbatim media and had no problem to create diskettes.

• Pavillion15: cannot create recovery media when plug sandisk Flash Drive Cruzer 32 GB Force

  I put my new 32 gb sandisk Flash DRIVE on my pc and then followed the steps HP support assistant to create a recovery media. I get a message to say the minimum 22 GB capacity. He gets 90% and then comes up with a message saying that we live errors in the creation of recovery media. Please try again.

  Hi @JS100,

  Welcome to the HP Forums!

  It's a great place to find answers and advice!

  You have the best experience in the HP forum, I would like to draw your attention to the Guide of the HP Forums.

  Learn how to post and more

  How can I find my model number or product number?

  I understand you are trying to create a recovery on a USB media.  The process is progressing well until it gets to 90% and fails then indicating that she has problems in the creation of recovery media.  Please try again.

  Please use a white, not more than 32 GB and USB flash drive high quality brand not like Windows compatible 8.  As he only missed the first attempt, I suggest that you format the USB key before you re-attempt to create the

  image.

  Here is a link to the computers HP - create a recovery Image on disk, or save a recovery Image on a Flash USB (Windows 8) drive that can also help.

  If you are unable to complete the creation of the recovery media please contact HP support for assistance.

  Contact HP to Contact HP Support assistance

  To say thanks for the reply please click the thumb below.

  If you have managed to create your recovery media. Please select solution provided to help others who may experience the same difficulty.

  Good luck!