NB300 - multiple problems

Bought a NB300 in June for my daughter. As I've been in and out of hospital all summer I didn't know that there are so many things wrong with it until this week. No sound, can't shut down properly - supply obligation into hibernation instead of this, it cannot uninstall programs.

My question is how to do this sorting by Toshiba, as it is obviously still under warranty and I don't have the time or desire to mess around with it myself. I can't find anywhere on this site to tell me.

Thanks in advance ##Gael

Who knows what's wrong there. You can do in this situation is better to make the new operating system installation using the HDD recovery procedure. Please check the user s manuals document and pick up info how to do this.
With the factory settings, I hope that everything will be OK again.

If you still have questions let us know.

Tags: Toshiba

Similar Questions

  • multiple problems

    I use a desktop HP p7-1154 with Windows 7 computer.

    I'll have multiple problems but not stabilize those. Sometimes when I go on Internet Explorer, I get more than one copy of opening. Then, I sometimes get the message "Internet Explorer has stopped working" and will close. This will be repeated at the opening or while I'm online. Duplicates are also on the opening of different programs.

    Some photo programs that I use, breast different tools do not work. Program companies say that they have never heard of this problem, even after that I performed their suggestions.

    When someone plays games of cards on this HP sometimes when they click on a map several cards open, ruin this game.

    I ran Virus and Checkup, Spybot Search & Destroy to Norton, CC Cleaner, Malware Bytes and most of them said 'No problems a' I also do not have a system back Restore Point far enough away from using it.

    I'd appreciate any suggestions really.

    Most of the things have been resolved. We always get several cards when you play, but I can live with that. The Internet issue is corrected, which makes me very grateful...

    Alex

  • Windows Vista/Defender telling me that I have multiple problems after update

    I use Windows Vista.  I've had problems since getting an update a few days ago.  Windows Defender is constantly telling me that I have multiple problems - if nothing has changed outside the Windows Update.  When I try to open my Convert (bought) the DVD program, it displays the message from the Red Cross stating that "Windows cannot access the specified device, path or file.  May not be the appropriate permissions for access you to them.  I should have all permissions on a computer at home.

    It would help if you gave the details of the messages you see Windows Defender.

    It could be that you have a fake antivirus infection similar to this:

    http://www.bleepingcomputer.com/virus-removal/remove-Windows-enterprise-Defender

    A symptom of this would be applications for payment activate the software.

  • My wife and my daughters both UAC accounts saying now that they have multiple problems and insufficient for memory.

    My son used my daughter and wifes UAC because I had his safety to tight to his liking. My wife and my daughters both UAC accounts saying now that they have multiple problems and insufficient for memory.  My UAC (admin) is fine. I opened his account and it's good? It seems to me that all UAC accounts would receive if it were a virus? My wife and my daughter lost all the photos and several icons on the desktop. The Help window opens automatically when you connect. The two seem to have lost the Explorer, I am at a loss. Any suggestions?

    Hello

    'insufficient memory' and hidden data

    If this is the case you can be infected

    read the error messages wrong than some malware product to try to rip you off at the link below

    read the information at the bottom of the below link to the subject of some malware that hide your data files and the cure for it regarding

    Read article 17

    http://www.bleepingcomputer.com/virus-removal/remove-Windows-Recovery

    also follow the correct for that malware removal steps, just to be safe, let's

    _______________________________________________________________

    otherwise, the foregoing:

    try a restore of the system before this happened

    http://www.windowsvistauserguide.com/system_restore.htm

    If necessary do in safe mode

    Windows Vista

    Using the F8 method:

    1. Restart your computer.
    2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
    3. Select the Safe Mode option with the arrow keys.
    4. Then press enter on your keyboard to start mode without failure of Vista.
    5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
    6. Do whatever tasks you need and when you are done, reboot to return to normal mode.
  • CS6 is compatible with El Capitan? I have multiple problems, mainly with InDesign, that is broken, disappearing type elements, limited cancellations, low memory warnings. I would like to hear from someone representing Adobe on this.

    CS6 is compatible with El Capitan? I have multiple problems, mainly with InDesign, that is broken, disappearing type elements, limited cancellations, low memory warnings. I would like to hear from someone representing Adobe on this.

    Many people find such problems with CS6 in El Capitan. There will be no update for CS6, it has reached its end of life.

    You must go back to the previous version of the operating system, or upgrade to creative Clud.

  • Custom Script of Multiplication problem

    I'm having a problem when I create a certain script multiplication where is just is not calculating correctly.  Its looks simple, but with my knowledge of scripts, I am unable to understand.  I read these forums and used a script that I found in another thread and it works for one of the calculations that I do, but then it does not work for another which does essentially the same thing.

    So here's the scenario - I have a longer calculation of subtraction multiplication then back to the multiplication and the final multiplication script is the I can't work correctly even if I copied and pasted one (which works fine) and adjust the field values. I don't understand. The calc looks like this

    Text 1

    x 2 text

    = Text 3

    -Text 4

    = Text 5

    x 6 text

    = Text 7

    So, I have in the script customized for the first solution of multiplication.

    Get the value of the field, as a number

    var v1 = + getField("Text_1").value;

    Get the value of the field, as a number

    var v2 = + getField("Text_2").value;

    Calculate and set the value of this field for the result

    Event.Value = v1 * v2;

    And in the solution of subtraction I

    Get the value of the field

    var v1 = getField("Text_3").value;

    Get the value of the field

    var v2 = getField("Text_4").value;

    Set this field equal to the subtraction

    Event.Value = v1 - v2;

    And then I have in the final solution of multiplication

    Get the value of the field, as a number

    var v1 = + getField("Text_5").value;

    Get the value of the field, as a number

    var v2 = + getField("Text_6").value;

    Calculate and set the value of this field for the result

    Event.Value = v1 * v2;

    I have been using the following numbers:

    Text 1 = 417000

    Text 2 = 0.25

    Text 4 = 25000

    Text 6 = 4

    I received the following responses:

    Text 3 = 104250 (correct)

    5 text = 79250 (correct)

    Text 7 = 417000 (incorrect; should be 317000)

    Can someone help me?

    You must pass in forms editing mode (forms > add or edit fields) and then select "forms > edit > set field calculation order of fields" and organize the list of the calculated fields in the logical order for your form.

  • Division / multiplication problem

    Hello

    What type of data I use in order to get output 1?
    declare
    a float:=1;
    b float:=3;
    c float:=(a/b)*3;
    begin
      dbms_output.put_line('Rezultat: '|| c);
    end;
    In this way, I'm suis.99999999999999999

    Hello

    Rounding errors can occur with any numeric data type.
    If this is a problem, can help turn:

    c := ROUND ((a / b) * 3, 20);
    

    Rounds the result to the nearest multiple de.00000000000000000001 before you assign it to c.
    If (has / b) * 3 is supposed to be an integer (or a multiple of half, or a tenth or a hundredth, or...) then this will ensure that it is.

  • How to disable the button after the first click (click multiple problem)

    Hello

    I have a ' create' button related to processes of insertion in the database view. The problem is that when I click on him twice, I have two insertion in my database (even with the option run processes: "Once a visit to Page"). Is it possible to disable the button after the first click? and activate on load before the header?
    or maybe there's better solution? I thought that the process of the option run must stop multiples (insertion).

    Przemek

    Przemek:

    You can do the following.
    (1) set the "button"style"of the 'Create' button to be 'Button HTML'"
    (2) set the "key Attributes" have
    ID = "myButton".
    (3) in the "optional Redirect URL" section set to 'Target' ' "URL".
    (4) for the URL, specify {code}
    JavaScript: $x('myButton').disabled = true; doSubmit ('CREATE') {code}

    CITY

  • new firefox has multiple problems, I need answers

    several problems with this new version.
    1. the URL of the site that I'm looking does not apprear in the navigation bar. It stills says "search type here" even after that I have and am looking at a new site.
    2. previous/next buttons are gray, so if I look at a web page and navigate it, I can't go back to where I was.
    3. the default search in a new tab engine is still Bing, no matter what I type in 'options '.
    4. the view of a new page is clumsy and too much space is taken up with a bunch of firefox, even if I take some toolbars. Addition or subtraction of the toolbars from the view does not have a difference in all of the space allocated to the view of the site.
    5. I have lost the "kindle-it" icon, so now that if I want to push kindle I have to go to the search at the bottom of the tab Add on process, then open the - several steps that did not previously exist.

    The first two of these problems are so severe that I spent to googlechrome as my browser by default until they return to normal. the others are boring, but the general impression is that this 'new' version of firefox is very much worse than the previous.

    Hello halimabr, most of the problems you've described sound like stem by obsolete extensions - please test if you can reproduce this behavior when you start firefox in safe mode, once...

    Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox

    You can also try to reset firefox and see if that can solve the problem...

  • All of a sudden, multiple problems suddenly, as no address bar, back button works do not, etc.

    On my computer starts, when I opened firefox, everything was different (at the time I installed Lavafox and darker Google) home page has not been loaded (instead, it was the new tab page with recent history pages), the address bar was visible, but did not show any page or tab unless I started typing something in it the back button didn't work, my toolbars have been stripped and do not show up until I switched their show/hide, there is an empty space of 1 inch at the top of the browser between (the border with the mini/max/close buttons. and the tab dropdown Firefox mainmenu)

    It seems that all my problems have been resolved by simply disable all my Addons and reset of firefox. Must have been one of the addons do not behave.

  • Portege 7200 multiple problems

    Hello

    It is my last ditch attempt to try and get some sort of difficulty for my Portege 7200.

    I will try to explain as best as I can, so this is.

    I had a system dual boot (Linux & Win98), did not want Linux HD so formatted and reinstalled Win98.

    Everything works except for a few problems that I hope you guys can help with.

    1. at startup (before windows logon) I am invited with cannot find VREDIR. VXD and a few other VXD files.

    2 screen dislikes the adapter PCI/AGP of Trident Cyberblade e4-128. Only the driver installed, that followed the instuction on the Toshiba tools and utilities cd-rom. keep getting invited to change my display at startup configuration. Once logged into windows screen does not match the entire screen (black border). Have used the companion disc one receives with the Portege to stretch the LCD. The screen is bigger, but the display quality is bad.

    Can anyone help as I am at a loss on any one of the above point.

    Kind regards

    Joe

    P.s. If there is more clarification or information then pls let me know and I'll try my best to get it.

    Hello
    most likely, these files are not at all. This message usually when these files become 'independent' in the registry, or when certain network/protocol device missing files.
    The problem with these files occurs generally when you install something in the network control panel that does not install correctly.
    If you have recently installed a network adapter or Protocol in your system, remove it and reinstall it.
    The IPX protocol is often also responsible for this message.

    Good bye

  • Multiple problems (unable to see the focus groups etc.)

    For a while now, well, several versions, I had problems with Skype works correctly.

    When I see groups of discussion, it says "Untitled Discussion" with 0 participants, but sometimes we are able to talk through even if it is said that to me. Sometimes if the group already exists, I am unable to join the voice, I have to be already on appeal with the person who hosts the discussion group to make it work.

    Message also seem to take up to 30 minutes to send (normal text chat).

    I can't see also photos that people send me on Skype... I have to go to the web version on my email to be able to see the pictures.

    I tried several solutions already to try to solve the problem, but nothing has worked. I tried to update, but he was already at the latest version. I tried a reinstall. I tried to go back to some older versions, but the problems remain. I tried to uninstall - delete the temporary resettlement, but it did not work. Currently, even after uninstalling and installing one of future versions of version 6 of Skype hoping it becomes usable.

    Internet and computer must be able to run it without problems too.

    65/10 with usually around 14 internet ping.

    Win 10 Pro x 64

    i5 4690 k @ 4.6 GHz

    NVIDIA GTX 960 4 GB

    32 GB OF RAM

    Thanks to one that has a solution for this.

    Well, it seems that I could solve the problem.

    There is not any messages telling me that the SKYPE account has been locked, while Microsoft, it was not. They wanted me to change the password for some reason any, while they were locked. Since the account Skype has been locked the account Microsoft, things like who was online and worked this kind of things, but I had trouble sending messages etc. because the side inherited things Skype wasn't working.

    Change the password of Skype (which did change the password for microsoft at the same time) worked and I was able to send and receive calls and messages normally after that.

  • El Capitan 10.11.3 multiple problems

    Since I updated to El Capitan 10.11.3, I have had two very annoying problems. The first is a problem of tip of offset. The lag spike occurs, on average, every 20 seconds to 3 minutes, lasting about 5 to 15 seconds. It affects my entire computer, not just a single application. If there are moments where it will go up to 15 minutes without a hint of lag. I used MacKeeper to clean all junk files, restarted my computer and have even deleted all my photos (I them backed up, so no need to worry). I went to look at my use of the CPU and memory, but none of them go above 5% usage. I have 510 GB free 1.01 TB. My computer has 4 lag spikes while typing this. This is how it is.

    My second problem is my magic mouse and keyboard connection lost when my computer goes to sleep. They lose the connection and cannot reconnect. I have to turn off my computer completely using the top button is back and turn it back on for them to reconnect. I had this problem since 10.11.2

    Care of my computer:

    iMac 27 inches, end of 2013

    Processor, 3.5 GHz Intel Core i7

    Memory, 32 GB 1600 MHz DDR3

    Graphics, NVIDIA GeForce GTX M 780, 4096 MB

    My humble opinion your problems could very well do with Mackeeper.  Search for "mackeeper' here in the Discussions.  You will see that the warnings on this subject are ubiquitous.

  • Re: Satellite L300D-242 - multiple problems, usb ports, some keys on the keyboard

    Hello

    I'm having some problems with my computer laptop sateliite, everything worked fine until I changed the operating system from windows vista to windows 7 and now my USB ports arnt working, sometimes they work and sometimes they are not but its never the same one that works he constantly of the changes, also on my keyboard the game Skip, stop, mute buttons have stopped working.

    Can someone help me please?

    Thank you

    Hello

    To get to play, pause and other buttons works, you need to install the VAP (value added package).

    The USB ports are controlled by the chipset, so I recommend you to install the chipset driver to get this resolved.

    I hope this helps a little

  • Multiple problem templates Veristand 2014

    Hello.

    I have a strange behavior with my models running in Veristand. I am a very experienced with Labview Veristand user and this is the first time I've seen this problem.

    My HW is a pXI8110 with bit of Council set up to 1000 Hz.

    I have compiled several models of Labview in Veristand (14 to simulate the ECU of a vehicle plant). There is not so complex. These models read data from the CAN, run the code and connect the outputs to other models or CAN. I have also a custom device consumes 50% of 4 hearts.

    When I begin to test the system, I can verify that several code in some models is not running. I mean, I have 6 entries in a single model can and I see all the values on the 5 entries are working properly, but the code corresponding to the last entry does not work correctly. I checked that the maps are good and I also had the last value entered without any positive result.

    I also tried to change the order of execution of models, but it still does not work. I also increased the decimation of this model (instead of 10ms to 100ms), but it does not work.

    If I try the model in a project Veristand PC it works well, so I wonder if it can occur due to a leak of cycle time, because PXI is not able to run all the code model.

    You have any idea what to check?

    Thanks in advance.

    Miguel.

    Hello.

    I did several tests and model works again increase the decimation.

    To avoid this again once I generated a "code execution time-out" in each model using counters and I check if this time is greater than the actual runtime set in Veristand. In this case, I generate a warning. Then I manually adjust orders and the model run time. Unexpected results can be found if this happens again.

    BR,

    Miguel.

Maybe you are looking for