NB500 lights no more

Hello world

2 days ago I was in the Middle using my NB500 and all of a sudden the laptop is automatically disabled. I tried to turn it back on but it will start.

So here's what I tried to correct the problem:
-J' tried to take the battery, while leaving the charger plugged into the laptop and tried to turn it on, but it won't turn.
-J' tried to take out the battery and unplug the charger re laptop and now the button of power for 30 seconds then plug back the re-shipper and tried to turn it on, but it won't turn.

Here's what I noticed on the laptop after that this problem occurred.
-When I have the re-charger plugged, the led that lights up orange when the re-charger is connected the laptop to load is not turn on more when I recharge it plugged. So this can indicate with the new charger is broken or is the laptop. But it is likely to be the laptop because when I used it last with charger plugged into the laptop, the laptop suddenly shut down without any reason. So it can ' tbe that the notebook is on battery.
-When every time I have press and hold the power button for 5 seconds with the battery remains in the cell and release the power button, the green light that lights up when the laptop is actually a quick flash.

So, if anyone knows how to fix this please help me.

On this virtual path, it is not easy to say what the problem is here. We can only speculate on the problem and unwanted material.
I can't say for sure, but to me that sounds like to power, electronic problem (motherboard).

I fear that you will not be able to solve this problem alone. Contact the nearest service Toshiba, explain the situation and ask for help.

Tags: Toshiba

Similar Questions

  • Hello! My AirPort Express (802.11a/b/g) lights no more. I think he lost his power. What should I do to restore its power?

    Hello! My AirPort Express (802.11a/b/g) lights no more. I think he lost his power. What should I do to restore its power?

    If AirPort Express light does not illuminate, this indicates that the internal power supply inside the Express did not, and the device will need to be replaced.

    If you really a 802.11a/b/g in the Express version, it is at least 8 years old and probably much older than that.  Average life of this product was about 3-4 years, then you have had surprisingly good luck with your product.

  • T3i does AF in low light DISCOS more (using 550 ex)

    I do disco photography and I've had my t3i for about 2 years now and I use the 550 ex.  Recently, the red light blinks when I try to get a focus in low light using the kit lens.

    I know that red light works because I used it with a trigger and I put the flash on a 7 d and it works very well.  In order to get a update now in the Dim light, I have to use a secondary video light for the camera to focus.  The AF works very well in regular light and dim light - but not in a dark nightclub (but it used to).

    Make sure that your device is set to 'One Shot' AF as support on the flash light does not work if the unit is in "AI Servo" AF.

  • Satellite Pro C50-A-153 does not not turn on more - overheat?

    LS,
    A week ago I bought a new laptop, a Toshiba Satellite Pro C50-A-153.

    Last night I was watching some micro-credit (looking for a new holiday) and I noticed that the laptop was overheating.
    I hit the market / stop butten and it turned of... later.
    And now the computer lights no more.

    _Situation: _
    laptop was placed on my table, completely cleared of any blokades for air intake.
    The table was heated. Now after hours of reflection, the computer does not work.
    With or without power line in it.

    What should do?
    Erik

    Hello

    Let's hope that Timox tips might work for you.
    In case of workaround won't help you, I would say that some hardware is dead, and so the laptop does not power and more.

    What part of material likely to be affected? Hmm, in the worst case, your motherboard is faulty.
    But I think first of all that some less expensive parts need to be checked for example RAM modules.

    RAM failure would prevent the laptop to boot and so I would check the modules first.
    I don t think there is something wrong with HARD drive because even if the HARD disk is defective, the device turns on but could not start the system.

    But it's a new laptop... so don't replace anything. The guarantee is valid and in the event of hardware problems, the guarantee must cover the laptop repair.

  • Backlight does not turn on more Satellite M70 147

    Hello outhere.

    The backlight on my M70-147 M-series lights no more.
    First of all, I noticed that when the awakening of the laptop from the standby or hibernation mode.

    At first I thought that the screen did no more work, but when I looked closely I could still do believe the icons on the desktop remotely. So, initially, I rebooted the laptop and then most of the time the backlight will light and stay on.

    But now he did not do more, not even when I close the screen (to force the standby mode) and then open it again, the backlight won't turn on.

    I also looked at other forums and topics, what the cause could be a faulty inverter or a broken rear window.

    So can anyone with the symptoms described tell me what could be the cause?
    I am sure that everything goes well with the graphics card because when I hung on my laptop to my LCD of dads he just showed the Office from my laptop on the LCD display. Also the first time I did it after pressing Fn + F5 several times the screen of my laptop would come on a few times. But now it does not more.

    So can anyone with the symptoms described tell me what could be the cause?

    Thank you very much.

    > Can then anyone with the symptoms described tell me what could be the cause?

    For me, it looks like a faulty FL inverter.
    The FL inverter is a small part behind the frame of the screen and it controls the backlight.

    Usually the external monitor should work fine because the FL inverter affects the internal display only...
    However, the problem can be solved by the replacement of this part.

    I recommend you contact the Toshiba ASP in your country to get this part replaced

  • Satellite P300D - multimedia keys are not light up

    Hello

    I have a series of Satellite P300d and I love it but the word Satellite and multimedia buttons lights no more, I I've read the book and looked in the settings confusing incase she is somehow got turned off... Can anyone help? Is this a bulb or something?

    Amanda

    Hello Amanda

    Remove pre-installed Package added value (Control Panel > programs and features), restart your laptop, and after doing this download and install again.
    The correct version, you will find under http://eu.computers.toshiba-europe.com > support & downloads.

  • X 1 carbon Gen 4 food wholesale/more heavier?

    Just got my new gen 4 X 1 not affect carbon, very light and so far, its great. I noticed something weird because I also have a T450. The power supply provided with the carbon is a 65W FRU 45N0263, it is larger and heavier than the 65W power supply provided with the FRU T450 00HM 616, there is a difference of 3 oz.

    I'm just confused as to why? A so-called portable lighter premium more but a heavier food, weird choice?

    Just watched again, my mistake. The T450 came with a power supply 45W, 20V, 2.25 A adapter. So it is small and lighter, while the carbon X 1 comes with a power adapter 65W, 20V 3. 25A.

  • HP Pavilion F6 / Mute key Light-Now does not?

    Hello

    A little over a week ago, I went out and bought a HP Pavilion 15 laptop-e092ea.

    It's a brilliant machine and I'm really happy with it, but there is just one small thing that has popped up.

    I'm sure many of you know, Pavilion series laptops have a mute very practice that serves to the F6 key. This key is a small LED that lights up when you press on to show that the computer is cut.  Until yesterday that the light was working fine until something came on the screen mentioning an update of the BIOS. I went ahead with the update and everything seemed fine. I then discovered that the LED was not lit when I used the key to turn off the computer.

    I tried to reinstall the audio drivers and restart the computer several times after reading some information on the forums, but nothing works. The key still works perfectly, but given that the computer is fairly new, I just fix the problem. I would take it to a repair place, but it is too small and the pricing is not fair in the slightest.

    The lights of the Caps Lock, button / stop and led for Mode without wire/flight work, it's just that touch Mute, that does not illuminate. As I said, this is a minor thing but I would be nice just to have working again.

    I am running Windows 8.1 if it's of any help.

    Anyone know how I can fix this problem? The update of the BIOS could affect it at all?

    Thanks to all those who can help you.

    Thanks for your reply.

    In fact, I managed to get the light works again after reinstallation of an audio driver using HP Recovery Manager.

    I tried to reinstall the driver using the Windows Device Manager, but it had not worked.

    As soon as I used the Recovery Manager when amber was light once more.

    Thanks for your help.

  • My laptop does not light.

    I have a HP G61 - 408CA, and it just will activate not more.

    The power adapter led is lit and the (lightning bolt) battery light constantly flashes when the battery is connected. This light flashes more quickly for about 1 second when I press the power button. Without the battery, the obviously lights at all.

    I tried a hard reset. I tried with and without the battery, and I also tried a different power adapter.

    Any tips or ideas?

    I think the motherboard gave and the only way to make it work again is to replace the motherboard. Post back if you have other questions about this.

  • [Camera RAW] Is it possible to adapt the algorithm of auto lighting?

    I find auto to be a decent starting point to adjust exposure and generic lighting, but I find that the algorithm is incorrect:

    1. the algorithm always puts the white on the edge and generates black/white clipping. Auto should never allow that.

    2. the algorithm is more focused on the right exposure settings, rather than evening the entire image to make a curve smooth color.

    3. I think I wish I could say just the algorithm "Okay, its good and all, but I want each time for the algorithm to be a little less exposed.". I don't like the lighter images, unless I go to this effect. I love the deeper images, and I find that too much light makes the entire image... flat.

    Is it possible that I can change the 'Auto' button to choose a different algorithm, for example, less light or more light?

    Is it possible that I can change the order of precedence of the auto, focus on the configuration of other parameters before you adjust the exposure, or focus on the lighting curve smoothing, rather than put the lighting in the same area?

    I wish there was a way to point to something and say the program, "this point, this is where you need face lighting the most for auto.» If this area is bad, its automatic failure on the curve of the car. »

    No, it is hard-coded in. However, you can apply the car in a different way. You can shift/click on the individual settings to only set Auto for these adjustments you want to make.

  • Rolls of Safari and Mac short slow in one account, many incident reports "nsurlstoraged".

    Safari now usually takes a long time to open the windows and tabs and enter the URL. Sometimes, it makes everything else on this slow user account. The problem does not exist in the other user accounts. The problem when you perform a safe boot.

    I don't know when the problem started but I didn't notice the Mac and especially light ran more slowly after installing manually updating of Combo OS X El Capitan 10.11.2. I have rebuilt the Spotlight index by using the method of the preference system and Onyx. I have reset the SMC.

    I also deleted cookies, disabled the Safari extensions and manually deleted the "com.apple.Safari" of the ~/Library/Caches folder. Maybe not in the right order or schedule however.

    Checking the Console I see in the reports section of diagnoses listed user many accidents of 'nsurlstoraged '. Sometimes the new get generated without that user to do anything like that, often, if not always new are generated when a new tab or window is opened.

    Here is an example of nsurlstoraged crash report less much of the section "binary Images:

    Process: nsurlstoraged [860]

    Path: / usr/libexec/nsurlstoraged

    ID: nsurlstoraged

    Version: 760.5.1

    Code type: X 86-64 (Native)

    Parent process:? [1]

    Manager: nsurlstoraged [860]

    User ID: 501

    Date/time: 2016-06-03 09:53:07.770-0700

    OS version: Mac OS X 10.11.5 (15F34)

    Report Version: 11

    Anonymous UUID: E411A541-9861-5B4D-6C9B-BCD80B3D1BAA

    Time since started awake: 6000 seconds

    Integrity of system protection: enabled

    Crashed thread: 1 dispatch queue: com.apple.cookied.cookieserver

    Exception type: EXC_BAD_ACCESS (SIGSEGV)

    Exception codes: KERN_INVALID_ADDRESS at 0x00007fbbbdb0d885

    Note the exception: EXC_CORPSE_NOTIFY

    VM regions near 0x7fbbbdb0d885:

    MALLOC_SMALL 00007fbb8c000000-00007fbb8d000000 [16.0 M] rw-/ rwx SM = PRV

    ->

    STACK GUARD [56.0 M] 00007fff556e7000-00007fff58ee7000-/ rwx SM DRAW keeps stack for the thread 0 =

    Thread 0: Dispatch queue: com.apple.main - wire

    0 libsystem_kernel.dylib 0x00007fff9af0df72 mach_msg_trap + 10

    1 libsystem_kernel.dylib 0x00007fff9af0d3b3 mach_msg + 55

    2 com.apple.CoreFoundation 0x00007fff8b2f91c4 __CFRunLoopServiceMachPort + 212

    3 com.apple.CoreFoundation 0x00007fff8b2f868c __CFRunLoopRun + 1356

    4 com.apple.CoreFoundation 0x00007fff8b2f7ed8 CFRunLoopRunSpecific + 296

    5 com.apple.CoreFoundation 0x00007fff8b3399b1 CFRunLoopRun + 97

    6 com.apple.CFNetwork 0x00007fff8752b407 _nsurlstoraged_main + 851

    departure from 7 libdyld.dylib 0x00007fff8f5135ad + 1

    Thread 1 crashed: Dispatch queue: com.apple.cookied.cookieserver

    0 com.apple.CFNetwork 0x00007fff87543cfd CompactCookieHeader::getEnumeratedString (CookieData::FieldNames) const + 239

    1 com.apple.CFNetwork 0x00007fff87543ac3 CompactCookieHeader::assertCookieValid (unsigned char) const + 75

    2 com.apple.CFNetwork 0x00007fff874acc52 CompactCookieArray::assertCookiesValid (unsigned char) const + 182

    3 com.apple.CFNetwork 0x00007fff874acb7f CompactCookieArray::fastValidateAndReturnOrReleaseAndReturnNil (ay const CompactCookieArr *) + 19

    4 com.apple.CFNetwork 0x00007fff8768fcdf BinaryCookieStorage::readCookiesFromStream (__CFReadStream *, MemoryCookies *, __CFData const *) + 427

    5 com.apple.CFNetwork 0x00007fff8758e1fe DiskCookieStorage::readFileToCookies(MemoryCookies*) + 168

    6 com.apple.CFNetwork 0x00007fff8758db13 DiskCookieStorage::initialize (const MemoryCookies *) + 207

    7 com.apple.CFNetwork 0x00007fff8769a003 PersistentCookieServer::completeInitialization (const __CFString *) + 941

    8 com.apple.CFNetwork 0x00007fff8765f9b7 ___ZN12CookieServer27completeInitializationAsyncEv_block_invoke + 24

    libdispatch.dylib 9 0x00007fff9821c93d _dispatch_call_block_and_release + 12

    10 libdispatch.dylib 0x00007fff9821140b _dispatch_client_callout + 8

    11 libdispatch.dylib 0x00007fff9821603b _dispatch_queue_drain + 754

    12 libdispatch.dylib 0x00007fff9821c707 _dispatch_queue_invoke + 549

    13 libdispatch.dylib 0x00007fff98214d53 _dispatch_root_queue_drain + 538

    14 0x00007fff98214b00 _dispatch_worker_thread3 + 91 libdispatch.dylib

    15 libsystem_pthread.dylib 0x00007fff895744de _pthread_wqthread + 1129

    16 libsystem_pthread.dylib 0x00007fff89572341 start_wqthread + 13

    Thread 2: Dispatch queue: com.apple.libdispatch - Manager

    0 libsystem_kernel.dylib 0x00007fff9af14efa kevent_qos + 10

    1 libdispatch.dylib 0x00007fff98217165 _dispatch_mgr_invoke + 216

    2 libdispatch.dylib 0x00007fff98216dcd _dispatch_mgr_thread + 52

    3 wire:

    0 libsystem_kernel.dylib 0x00007fff9af145e2 __workq_kernreturn + 10

    1 libsystem_pthread.dylib 0x00007fff89574578 _pthread_wqthread + 1283

    2 libsystem_pthread.dylib 0x00007fff89572341 start_wqthread + 13

    Thread 4:

    0 libsystem_kernel.dylib 0x00007fff9af145e2 __workq_kernreturn + 10

    1 libsystem_pthread.dylib 0x00007fff89574578 _pthread_wqthread + 1283

    2 libsystem_pthread.dylib 0x00007fff89572341 start_wqthread + 13

    Thread 1 crashed with X 86 State of Thread (64-bit):

    Rax: 0 x 0000000000000000 rbx: 0x00007fff876f14b0 rcx: 0x00007fbbbdb0d885 rdx: 0x00007fbbfbe40999

    RDI: 0x00007fbb8c80a657 rsi: 0x00007fbbbdb0d885 PBR: RER 0x000070000007f550: 0x000070000007f550

    R8: 0 x 0000000000000003 r9: 0x00000000ffffffff r10: 0x000070000007f570 r11: 0 x 0000000000000206

    R12: 0x00007fff87543bd0 r13: 0x000000000000000a r14: 0x00007fbb8c80a657 r15: 0x00007fff876f158c

    RIP: 0x00007fff87543cfd rfl: 0 x 0000000000010246 cr2: 0x00007fbb8bc17000

    Logical CPU: 0

    Error code: 0 x 02000170

    Trap number: 133

    Binary images:

    0 x 106519000 - 0x106531fff nsurlstoraged (760.5.1) < A17C7877-2B5E-36B6-9AC5-644F244E9790 >/usr/libexec/nsurlstoraged

    0x7fff69279000 - 0x7fff692b025f dyld (360.22) < A468D85E-D8D6-3461-8C99-49D3B9ACFC63 >/usr/lib/dyld

    0x7fff87477000 - 0x7fff876feff3 com.apple.CFNetwork (760.5.1 - 760.5.1) /System/Library/Frameworks/CFNetwork.framework/Versions/A/CFNetwork < EE9426D1-F11C-3DD4-AE08-EA29AEB27177 >

    0x7fff87811000 - 0x7fff8784fff7 libGLImage.dylib (12.1) < BB1F1A93-5101-3906-AB17-8D83FCB200F9 > /System/

    Summary of the external change:

    Calls made by other processes for this process:

    task_for_pid: 0

    thread_create: 0

    thread_set_state: 0

    Calls made by this process:

    task_for_pid: 0

    thread_create: 0

    thread_set_state: 0

    Calls made by all processes on this machine:

    task_for_pid: 1799

    thread_create: 0

    thread_set_state: 0

    Summary region VM:

    ReadOnly part of libraries: Total = 176.2 M resident = 0 K (0%) swapped_out_or_unallocated=176.2M(100%)

    Regions in writing: Total = 36.2 M written = 0 K (0%) resident = 0 K (0%) swapped_out = 0 K (0%) unallocated=36.2M(100%)

    VIRTUAL REGION

    The NUMBER of DIMENSIONS of TYPE REGION (not melted)

    ===========                     =======  =======

    2048K 2 follow-up activity

    Ship 4096 K 2 continuations

    Kernel Alloc once 4 K 2

    MALLOC 18.3 M 13

    MALLOC 32K 7 cover page

    Corpse process Info 2048 K 2

    BATTERY GUARD 56.0 M 6

    Battery 9824 K 6

    VM_ALLOCATE 20K 3

    __DATA 8312 K 142

    __LINKEDIT 91.5 M 4

    __TEXT 84.7 M 146

    __UNICODE 552K 2

    shared memory 32K 6

    ===========                     =======  =======

    TOTAL M 276,9 329

    Please post the results of your report to EtreCheck .  It is a tool of diagnosis developed by a contributor trusted and respected here, and this will allow us to see what is installed on your hard disk in the path of the applications, drivers, plugins, extensions, etc..  No sensitive information is included in the report, such as names, e-mail addresses or serial numbers.

  • NB100 - can't see the indications on the keys on the keyboard

    I just bought a netbook NB100 for my partner, my first thoughts were, what a great little machine is, well I liked all about it, so I tried to use it. The keyboard, what a nightmare, gray lettering on black keys, if you had a light directly above the keys, that's fine, in the shade or in a shaded room, I could hardly see the lettering, blue key functions stood out more.

    Let me know what you think, or am I a little on top.

    concerning
    Stephen

    It seems ok to me.

    Try increasing the brightness of the screen so the keyboard lights up more.

  • What is the Ipod 7th generation to come.

    Hey guys, I was wondering when do you think the Ipod 7th generation going? I did some research and it is said most probably in June/July 2017. I got an Ipod touch 6th generation last summer and tracks warranty in July this year, while I was planning to sell in July and to buy a new Ipod touch 6th generation and then next year in 2017, I can sell the Ipod touch 6th generation and buy the Ipod 7th generation. You think it's a good plan because I want to buy new gadgets to replace the 'old'? Also, here's what I think than the Ipod 7th generation should include:

    • Contact ID
    • Better graphics
    • More colors
    • Make bigger in size and lighter
    • More great flashlight like the 5s
    • It should be able to put a SIM in there so we could use WhatsApp on it
    • Do a charger like the Samsung galaxy S6 Edge so we just put the Ipod on the stand of little and it starts to load.

    If everyone loves these ideas please tell me. If a member of the staff of Apple sees this please consider

    If anyone hear know they are bund by their non-disclosure agreement not to say.

    Dose of Apple does not monitor these forums for suggestions.

    To make a suggestion to Apple:

    https://www.Apple.com/feedback/iPodTouch.html

  • HP 15 laptop: startup failure, failure of the DST on 15 HP, with 8.1 windows

    Salvation in the transition from my laptop it displays

    automatic repair, then displays diagnostic PC for hours.

    I tried using F2 and found the failure of DST, and in the management of the firmware, BiOS update and roll back did not indicating that the Signature file was not available.

    How can I get my data back and restore my system? Looking for options and help

    Hello

    Thanks for posting in the HP Support forum. Welcome!

    I'm afraid that it is hardware problem - faulty hard disk drive (HDD). For more details, you can provide me with the full error code that was present there.

    However, since this is the defective HARD drive, you probably will not power recovery files (details to follow).

    Your options:

    (1) If your computer is still under warranty, please contact HP support and inform. They will work with you on how to replace the faulty component.  Contact HP:

    > > http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html

    > > http://support.hp.com/us-en/contact-hp

    (2) If your computer is with the warranty period has expired, you will need to replace the failed HARD drive - buy it yourself. There are various options - sellers you can choose one - you need 2.5-inch SATA HARD drive. You can get it online or retail store of PC.

    You can also consider installing the SSD instead of the HARD disk - it is strongly recommended that SSDS are faster, lighter and more folding. More info on SSD:

    > > http://www.computerhope.com/issues/ch001396.htm

    > > http://www.pcmag.com/article2/0, 2817,2404258,00.asp

    How to replace the failed HARD drive with new HARD or new SSD drive: Please, find information and instructions in the manual for your computer or look at examples of videos YouTube for HP 15. If you do not want this in your own, please make the computer (or ship it) to the authorized Service Center HP where technicians will do that for you. If you don't know where such a centre, check the latter or contact HP to help find one closest to you:

    > > http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html

    > > http://support.hp.com/us-en/document/c00372730

    > > http://www8.hp.com/us/en/store-finder/find.do?bs=SR4 & type = authorized

    (3) last part - once you replace the defective component - you have to reinstall your operating system - Windows or another return. Thus,.

    (3.1) IF your computer is originally shipped with Windows preinstalled from HP (aka OEM of Windows), then you must use the HP - DVD or USB pen drive recovery media you have previously created recovery media or purchased from HP. Some general info > > http://support.hp.com/us-en/document/c00006110

    (3.2) IF your computer is not originally came with Windows pre-installed, but you later installed the operating system on your own, you must use the operating system / Windows installation media and install Windows on your own.

    Please, let me know how it goes and post back if you need assistance. Impatience your feeback/response.

  • Satellite 1900-303 will switch

    For some reason, my Satellite 1900-303 lights no more.
    The old battery would claim to be charged and yet it wouldn't turn on.

    I bought another battery, but this has not yet resolved the problem.

    Can anyone help?

    Connect the laptop to the AC adapter?
    Please note that a new battery is not charged and before you will be able to use this battery you need to load!

    If the AC adapter is plugged in but the laptop does not start always then you must remove the battery, unplug the AC and must wait about 15-20 min.

    After this short period connect everything again and try to start the laptop!
    If it does not help there is not a lot to make :(
    In most cases, the hardware failure causes these questions and help of the technician is needed!

Maybe you are looking for

  • Enter e-mail address to answer email

    When I responded to an email I want to include e-mail, to what I say.

  • Satellite A300 - rotates but does not start

    Hello I have a Satellite A300. I had several probems for the boot since 2 months ago: when I want to turn on my laptop, it turns on but the screen keeps black and it does not load the screen "Toshiba Leading Innovation". 'Satellite' (to the left of t

  • Satellite L515-S4960: ESata port can be used for LinkSys WLan adapter?

    Buy Toshiba L515-S4960 laptop, bought a LinkSys RangePlus wireless notebook adapter, but I did not yet find a port to plug in. I wanted to extend the reach of the signal from my router. The place above the eSata port opens to support an adapter? I do

  • How they intend to while loops

    IM an example to count the number of loops of my program did. However, it doesn't seem to work. Ive attached a DBL the i indicator in the while loop of the block diagram. I joined the program below. Best regards, Sam

  • Organization of a page within ID using hyperlinks

    GreetingsI work with several pages within ID that are specific to several companies.I'm familiar with links to interactive PDF I make for several companies.But I would like to organize my ID file and make it easy to make the hyperlinks to anchors act