NB550D - does not start after Windows Update

NetBook may have turned off during the update of Windows like now it will not go beyond the Green loading bar with 'Microsoft Corporation' below. It gives an option to start windows normally or to load files to repair, but the two find themselves stuck on the Green loading bar. SafeMode (all options) earn as much as classpnp.sys and then freezes.

Using a different laptop I did a windows repair disc and then copied the files on the USB key (netbook has no CD drive) according to the guides online. When the USB key is loading files of repair, there is a flashing cursor, and then he's new to the Green loading bar. SafeMode (all options) gets stuck on disk.sys with inserted USB.

Found a few threads with similar symptoms with most being caused by a questionable HD (verified, nothing obviously disconnected) connection or the SATA mode in the BIOS the wrong (seems to make no difference between ACHI or Compatible). Next plan is to start a live version of linux and try to replace the classpnp.sys file with on another copy of Windows 7.

If anyone has experienced this before or can give indications that they would be much appreciated,
Thank you.

Hello

To be honest, never had any problems after a windows update.
But it looks like an anomaly in the system.
My first idea was the use of the repair option and you try to start the operating system using the option: use the last known good configuration.

But if it would not help, then you can try to replace the files to aid and booting from the Live CD. Not sure if this would solve the problem, but I think that it of certainly worth trying otherwise you will have to reinstall the OS using the HARD drive recovery (if still available)

Tags: Toshiba

Similar Questions

  • Windows does not start after Windows update.

    Original title: udate Windows vista problems

    I have dell dimension e520, Windows Vista home Basic, 32-bit SP 2, and in January, I upgraded RAM to 4 GB to 1 GB. McAfee security on the computer. The system worked until the last updated (March 2012).  The computer does not start correctly after March 2012 update and System Restore restores to February 21 implemented to date.  The computer will then automatically install the updates again and restart, after which the computer will not start up again (an annoying loop).  I also lose saved data after the system recovery sets return date.  I tried Microsoft Fixit, which did not help.  Thanks for your help. Hurry LOL available updates.

    PS computer says 'patch blocking windows to start.  Some updates successfully installed previously, but on the next time you download windows updates, that try to download updates and others have "failed."  Sorry for the confusion but I'm rushing and I try to include all the symptoms, I don't see dealing with the problem I have.

    I had to take it to get fixed, thanks to the effort.  The person fixing said he ran a few cleaning tools and which appeared to fix.

  • Computer does not start after Windows update

    I built my computer in December last year, which makes it less than a year. It has worked fine until this last week when I decided to give a few necessary windows updates a lot. I decided to download and install all night, and now it does not start. I get nothing on the screen. I don't get the safe mode options. I didn't get last known good configuration options. I don't not even a splash screen. After a full minute, it turns off again, regardless of how many times I turn it back on. It happened for a few days. Are no external hard drives not connected; only an intern. The only devices I plugged are my keyboard and mouse. Can anyone offer a solution? Whatever happened to you?

    I am running Windows 7 Ultimate Edition.

    The first time I tried to start after downloading the updates, he went to the boot screen windows 7 usual, that clear blue that says it configures windows and not turn off the computer during the process. Before we were told: "Welcome to Windows," he said "Shutting Down", but not before the configuration of progress has reached 100%. At this time, everything seemed normal. After the computer turns.

    Hello

    To fix your problem, you can follow the steps on this link. You can perform troubleshooting listed on this site by clicking here. The listed on these links troubleshooting steps are applicable to Windows 7 and more.

    Let us know how it goes.

    Best regards

  • VMWare Virtual Center Server does not start after Windows Update

    Help!  I'm under vCenter 5.1 on Windows 2008 R2 with SQL Server 2008 R2 Standard.  I have applied the latest updates for Windows (critical only) as it applied Service Pack 3 to SQL 2008 R2.

    Now the vCenter Service does not start.  It generates error 7024 in the Windows system log:

    The VMware VirtualCenter Server service stopped with the error special service that the system cannot find the specified file...

    and error 1000 in the Windows application log:

    Could not initialize the VMware VirtualCenter. Closing...

    PS - I confirmed that the SQL instance is running.

    Absolutely nothing has been done except the Windows and SQL updates.  Everything worked fine until this point.  Ko an article deals with a "space" condition, but there are a lot of available space.

    I have attached the file vpxd.log, he created.

    Clues?

    Thank you.

    OK it turns out that the WWW service is interfering with vCenter Service on Port 80.  The thing is that the WWW service has been set to manual start.  Somehow during the upgrade Windows or SQL, one of them decided to turn auto-start. After the reboot, the conflict occurred.  Once I put the WWW back service to manual start the vCenter service started OK.

  • Windows 8 Pro does not start after windows update updates for April

    Hello

    Pulled up to my PC this morning and was asked to install updates from windows update. Check the list, there are 11 important available updates. I have unchecked and hiding implementing Nvidia updated as I want to do the updates of my GPU myself. Installed the remaining 10, completed and has been asked to restart my PC.

    The problems starts here; I am more able to start windows.

    It is past the bios screen, shows the blue flag with a circle of rotation below and then... nothing more than a black screen and my screen goes to mode 'sleep'.

    I tried to start in safe mode minimum clean using a prompt (bcdedit/set {default} safeboot) repair my installation disk option, but it does not start even in safe mode.

    I run system restore turned on so that the option is not valid for me.

    The system is now check the disk for errors, but it seems to hang there as well as happens for more than 2 hours now...

    Any way that I can return the updates of windows on the outside? Any other suggestions than the reset of the installation disc?

    Spec: Evga x 58 classified 3, Intel Core i7 950, 2 x Geforce GTX 580 in SLI, 12 GB Corsair Dominator GT DDR3, Corsair Force 3 SSD 128 gb, Dell u2711 2560 x 1440. Win Pro 8 x 64, completely up to date with the latest drivers. PC worked perfectly up to this Point.

    Disappointed that the "major updates" Microsoft kills my work machine.

    Problem solved now and it was the update of KB2808735 who was / is the origin of the problem.

    I placed my SSD into another computer and was able to pull up in SafeMode off and remove the updates.

    Installed all the updates one by one until it chrashed again installing the update mentioned above.

  • Z50-70: does not start after Windows Update

    Hello everyone, I recently bought a Lenovo Z50-70. Today, after a Windows Update, I restarted the laptop and now the led, but nothing happens. What could have happened?
    Thanks for any advice.
    Stefano

    stefanocsl wrote:

    I can't enter the BIOS because when I turn it on, I can't do anything. Also does not show the word "LENOVO" to boot, I see the light, I'm not the fan noise or HD by pressing the power button does not turn off, so it is as if she is still locked, turn off I have to hold more than 5 seconds

    Rather than go deep with solve the problem, it's better that you call support for repair or replacement (better) because you just buy the device recently.

  • X 1 carbon does not start after Windows Update.

    Hello

    It was a yes I work on this X 1 computer laptop carbon and no default value.

    I had a windows update yesterday, I did it and my computer turns off naturally.

    This morning, I can not start it, it starts up fine, Lenovo sign appear but nothing after. only a black screen with blinking underscore.

    Any ideas?

    Thanks for your help.

    Hello

    Thanks for your help, but I already did that and no results. I call the warnaty Center and they change the card mother and ssd. so I lost all my files... they told me that they can save them...

    Now, I received a laptop cool but cannot be used because the SSD is not empty, no part of recovery and they gave me a cd of installation still... 2 weeks without a computer for my CEO with all files down... really painful.

    I close the topic, thanks for your help tho.

    Kind regards.

  • Windows Vista does not start after Windows update

    I am running windows vista on a PC laptop toshiba l300.  He did an automatic update of windows and this morning when I turn it on it will not load.  It comes with a screen saying download of updates please do not turn off your computer.  then, he turns his car on and keeps recycling through the same thing.

    I tried loading in safe mode, but it does the same thing in that. I also tried selecting the option, the last load charge effective network via the F8 key but again that has not worked.    I have not all disks with the laptop, so I don't have a vista disc.

    I'm not very computer and have done everything I can think off.

    can someone point me in the right directioin.

    I working on my main pc at this time and did the updates of windows to be sure it's XP

    Janhsmn,

    If you do not want to install updates on your computer, you can select the "Hide" option and it will ignore them in the future and continue with other updates. Do not forget that the reason why the updates could be the cause of this problem would be because as a conflict with a third-party software. And most likely will not affect both your systems in the same way unless you have the same third party software installed on all your machines.

    To hide the update in Windows Vista, please follow the steps below.
    1. click on 'start '.
    2. Type "Windows Update" and press on "Enter"(on the keyboard) ".
    3. Select "Search for updates"
    4. Select "View available updates"
    5 right-click the update that is causing the problem and select "hide update"

    Please let us know if you need more help.

    Thank you, Carlos
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Windows XP does not start after Windows updates

    Original title: recent Windows update for xp

    As a result a my computer Windows xp, last Tuesday, my computer is now inoperative.  He was fine before this, but cannot get it to turn on.

    When I tried again today, a message came up saying Microsoft to apologize for the inconvenience, but Windows did not start successfully.  A recent hardware or software change might have caused this.
    What should I do now?

    Grandmother,

    If the options above do not, I suggest you use the Recovery Console to try to fix your Windows XP

    Here's HOW - there images, so it is easier to follow. Read the section on how to use it.

    Once you are connected to the Recovery Console, type the following command and press ENTER:

    CHKDSK/p

    There is a space between 'k' and ' / '.

    This may take a few minutes and the command can fix registry issues possible that occurred. This is based on the experience that I have used this on an old XP machine and it showed a message after the recovery that looks like this

    See you soon ~!

  • Laptop does not start after Windows update

    I have HP laptop with Windows 8.1.

    It no longer starts after you install updates.

    It has happened before several times. I used system restore and it should correct the problem temporarily until the next time for the installation of updates.

    Now I can not even run system restore. He says that I have an administrator account.

    Help, please.

    The process I'll tell you will solve the problem, but it leaves a few effects. All the installed update will be uninstalled the version they had when you have installed 8.1 windows and programs in your programs (x 86) NO program file in the C: drive or the drive where windows is installed must be UNINSTALLED. The uninstalled programs will appear on your desktop as Applications.HTML removed. If you have any problem with the effects that I mentioned that process as follows:

    1. at start up press F11 to enter recovery.

    2. go on recovery to solve problems.

    3. then in troubleshooting, click on refresh your PC.

    4. wait it ends (it takes about an hour)

    5. your system is restored.

    Hope this helps

  • Computer does not start after Windows updates

    Windows XP Pro, computer was turned off during Windows Update 2-days ago (5.23.2011), now it won't start not to "last known config" hangs on the black screen, safe mode hangs at Mup.sys, suggestions

    Hi, Mike Murphy_24,.

    ·         There were several updates to install?

    ·         What happens when you start normally?

    Method 1: Disconnect non-essential external devices and then restart the computer. See if it boots fine.

    Method 2: If it is not booting all the advanced startup options, you can follow this article and check if it helps.

    How do I recover from a corrupted registry that prevents Windows XP startup

  • Windows does not start after Windows updates downloading

    I have an IBM Thinkpad R32 with Windows XP, 512 MB of ram and a Pentium 4 processor. Wednesday night, when I stopped, Microsoft downloaded a bunch of updates - 13 to be exact. When I went to start my computer the next day, I got a black screen saying "We apologize for the inconvenience, but Windows did not start successfully.

    When I select 'safe mode' I get a series of files. When I select "Last known configuration" or "Start windows normally" I get a blue screen with "a thread tried to release a source he did not' and the error code that goes in the bottom" STOP: 0x000000E3 "(0X80558BE0, 0X82FCA548, 0 x 00000000, 0 x 00000002). "When I press F8 for advanced startup options, I get the same result to choose 'safe mode' as before, but also the blue screen to 'last known...". "or"start windows normally ".

    I have a recovery disk but it seems to be the 2nd of the 2 discs, and I can't find the first. More I am concerned about the loss of material on my computer (have not saved in a while). My technical skills are marginal - I'm good at copy what is on the screen but that's all.

    Needless to say, I'm a little upset with Microsoft for burning my muddy computer with its updates. I set it so that I have to approve the updates, but I wasn't paying attention when I hit the button turn off with the updates.

    shadiahm,
    Thanks for posting on the Microsoft Answers forum.  The first thing to do is to remove the external devices (printer, USB drives, USB hubs, etc.), then restart.

    If you have your XP cd, you can run a repair installation: http://support.microsoft.com/kb/315341.  If you do not have a XP CD you must contact your PC manufacturer to obtain replacement disks.

    Also, if you have access to your XP, you can start in repair mode and run SFC/scannow: http://support.microsoft.com/kb/310747 Mike - engineer Microsoft Support responses
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • WXP MCE 2005 does not start after Windows update on Satellite P100-240

    After the restart, following an automatic update windows laptop will not continue to boot, all that happens is that you get the Welcome to Windows XP Home edition screen, HARD drive activity, then a white with an arrow cursor screen and then the HARD drive activity no longer.

    It happened last Thursday 10 October 07. Can anyone help?

    Don t know exactly what s happened, but I guess something was wrong during the update procedure.
    If you will not be able to start Notepad in safe mode or start Notepad and then user the Toshiba Recovery CD to Gets the functioning of the laptop!

  • IdeaPad S10-3 does not start after windows updates 7

    Hi Experts,

    I have a laptop Ideapad S10-3 with WIndows 7. It was fine until I installed a few Windows-7 Updatss. Once the updates have been made, the system rebooted and after that it never started. I just get the first screen of Lenovo with the F2 and F12 options. Anything after that. If I press F2, it goes into the BIOS menu, but if I press the F12 option, and then nothing happens. I just see a black screen with the cursor blinking in the upper left corner. Can someone please help me get back system works again. Would be a great help.

    Thanks in advance.

    Kind regards

    Vijay

    Hello

    Thanks for the suggestions, but none of them worked. However, I could finally get my ideapad work as follows.

    As soon as the screen of Lenovo's Logo, press F2 to enter the boot menu. In the start menu, there is an option for the compatibility of the disk with AHCI options (or something similar) Compatible vs. I don't know what was before settings but in the condition of non-working, the setting was AHCI. I then changed to "Compatible" and restarted after the registration of the configuration. He then loaded windows.

    However, I do not how the setting changed on AHCI. Also in mode AHCI, my USB not detected. After I changed the compatibility mode, it detects and I was able to load Ubuntu from USB disk as well (as a book drive).

    Try if it can solve your problem in this scenario.

    Kind regards

    Vijay

  • Windows load with black screen and does not start after windows updates

    Original title: load windows normally screen will not continue

    I went to my computer tower and I chose to install updates when closing.  I went back later to re - turn on my computer and now it loads to the top of the black screen that gives you 5 options. safe mode, safe mode with networking safe mode command prompt, windows loads normally and finally to load windows from last known configuration that works.  Problem is that none of these options work.  they all return me to the same screen.  Help this laptop came preloaded with Win XP Media Center edition and I can't get back to work.  IM assuming I need a XP disk support center but I can't find them anywhere! HELP PLEASE SOMEONE!

    Hi Burton089,

    Your hypothesis is right. To resolve this problem, we need to repair your installation of Windows using the Windows XP disk. We recommend that you contact the manufacturer of the laptop to check if they have the Windows recovery disk.
    See perform a repair Installation

    Visit our Microsoft answers feedback Forum and let us know what you think.

Maybe you are looking for

  • 10.11.4 slow

    My Macbook Pro is slow after update to 10.11.4, and "Disk utility" is more a function that I can run. What can I do, if I already ran first aid, and all applications on the Macbook Pro are slow, including simply Start Up.

  • Boot Portege M300 problem

    I don't know why, but my computer in a moment itself turned off, and now I can not lights, also using power supply, taken orange electric symbol flashes constantly... what should I do to fix it? I don't know what I can do, can someone help me?Please,

  • Cannot find download Realtek Wireless LAN Driver for my Qosmio X 500

    Hello I have just reinstalled windows on my Toshiba Qosmio X 500-140 and installed all the drivers I need.But I could not find Realtek Wireless LAN driver in the download list. I just find the LAN Driver. If I can just connect to the internet with LA

  • Pavilion 15-n248sa: what processor speed is shown on the information sheet?

    I was recently going through all my stuff, work on which should be placed in a cell, when I found all the information about my computer sheets. On one of these journals, it says that I have an Intel Pentium Quad - Core 2.4 GHz processor N3520, but wh

  • Bluetooth Manager - evaluation version

    I just started to use Toshibas Bluetooth Manager. He said that it is the evaluation version - I think that the USB dongle that I use is not Toshiba. On the other hand, it works - it is: -. What happens after the 30 days evaluation period - it just co