NDAS services stopped and do not work after installing Windows 8

Similar Questions

• His Dell Inspiron 1420, microphone and camera integrated into the laptop does not work after installing Windows 7 Professional

  No sound from my Dell Inspiron 1420 and the microphone and built-in laptop camera do not work after installing Windows 7 Professional 64-bit. My laptop has Windows 7 Vista 32 - bit family premium. My laptop is 64-bit capable and after going through the Upgrade Advisor, I installed Windows 7 64-bit. I can hear sounds when I use a headset plugged into the line-in Jack, but not through the speakers built into the laptop. I already tried new drivers from the Dell website, but I could not find.

  Any help will be much appreciated. Thank you.

  As it is has no drivers 64 bit Windows 7 on Dell Web site, your best chance is to install the 64-bit versions of Vista (if they exist) in compatibility mode, viz:

  Right click on the Vista driver, then select Properties > Compatibility tab. Now choose to run the program in Vista compatibility mode and then apply > OK. Right click on the file and select run as administrator to install it.

• Satellite P300-1This - Microphone does not work after installing Windows 7

  Hello world.

  At first, I'm sorry for my bad English, so I will say in no time.

  A few days ago, I removed a few programs, and I installed the new Windows 7 operating system. Everywhere I had to download the new drivers for the camera because they do not work. After you download the drivers of the camera, the camera become operative (YES!), but later worked for me, a built-in microphone was out of use. What may be of it with the cause and this driver to download and why the microphone not working?

  I can't talk with friends on Skype ;( Help me. I hope you know what I'm saying.

  Hello

  Do you really install any drivers after installing Windows 7? Maybe you have forgotten something and so it doesn t work.
  Micro is a part of webcam so be sure that driver webcam is properly installed and driver sound, you need to as well.

  After that, check the sound settings. Make sure that the Microphone is enabled and test it again with amp active microphone.

• Sony VGN - CR220E Webcam does not work after installing windows 7

  I recently installed windows 7 (not updated, clean installation of windows 7 on my Sony VGN-CR220E, and now my webcam does not work.

  Have already tried the tricks I know and searched the web and there are many others having the same problem, and there are number of recommended suggest solutions. Have tried several of them and has not worked for me after 2 days. Can someone who has actually had this problem and managed to fix it, please let me know.

  Thanks in advance...

  install http://esupport.sony.com/US/p/swu-download.pl?mdl=VGNCR220E&upd_id=5051&os_group_id=6

• HP laptop - 14-ac014tx: screen brightness will not work after installing window 10

  I was updating my computer to window window 10 8.1

  But I found that my screen brightnees do not work neither low nor high

  

  

  In addition, my touch of brightness of screen keyboard (F2 & F3) also does not work

  I have no idea how to fix this

  It make me very disappointed because of, I bought the computer in less than 6 months.

  If someone who knew what happens on my computer please help me, it really make me disadvantages

  Hi @weiwei17,
   
  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!

  I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your computer laptop 14-ac014tx HP and questions with your upgrade to Windows 10. Try to use the Windows Update Troubleshooter to fix the problem.

  Here is a document that shows how update the drivers that do not work correctly with Windows 10.

  HP has worked closely with Microsoft on developing for Windows 10. Currently there is no driver available for your system. You can try and check at a later date, because I see new drivers all the time.

  Here is a link to the HP Support Assistant, if you need it. Simply download and run the application and it will help with the software and drivers on your system that may need updating.

  Thank you.

• Card high speed does not work after installing Windows Service Pack for Vista

  I just installed Windows Service Pack for Vista and now my card Sprint high speed does not work.  The message I get is that the "peripheral No. is recognized. I was using the card top debit without any problems for over 6 months.

  What can I do to get this corrected.

  John

  Assuming that the Vista SP2...

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support, initially planned to end on November 26, 2009, has been extended until February 26, 2010. Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; ( Problems after installing a service pack). ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• HP Pavilion dv4 Notebook PC: touchpad scroll function not working after installing windows 7 (64)

  After a complete hard drive failure, I installed Win 7 everything works, as far as I know, except scrolling on the touchpad. I went through all the troubleshooting I can find.  The last one I tried was in the Control Panel, mouse and look for the details of the touchpad. It is not listed there.  I can't find a driver to install HP and Driver Downloads. Where can I find a driver for the touchpad with scrolling? The only thing listed under the mouse in the menu of device driver is a PC mouse.

  I'm sorry that the link of the page didn't work.  HP has problems with the website support, and even for me at times, page links do not work.

  As for the installation of Windows 9, how to acquire that is to order the HP recovery media. It is a DVD and CD set that will erase the hard drive (removing all data, applications and settings, reinstall the original OS, drivers and utilities for HP.  You get these by contacting HP Customer Service.

  If you live in the United States or the Canada, details are on this page: http://www8.hp.com/us/en/contact-hp/phone-assist.html#section1

  If you live elsewhere, contact details are on this page: http://www8.hp.com/us/en/contact-hp/ww-contact-us.html

  ========================================================================
  If you feel that my suggestions helped you, please click on the Thumbs-Up symbol; If they helped to solve your problem, please click "accept as a Solution.

  I'm a volunteer and I do not work for, or represent, HP.

• My CD/DVD burner does not work after installing Windows 7.

  Hello.

  I recently installed Windows 7 on my laptop (about 2 weeks ago), initially delivered with Windows Vista.

  The facility is perfectly, and I enjoyed the simplicity of the new operating system.

  Everything was going well for about 2 weeks.

  I was able to burn CDs and DVDs.

  But today, when my father asked me to burn a CD for him, Windows Media Player 12 says that I had to connect a burner and restart Windows Media Player 12.

  I restarted the program, which did not work.

  I restarted my computer, that didn't work.

  I uninstalled my CD/DVD burner drivers and reinstalled them back on and I thought that WMP12 had started working.

  But when I put the blank disc inside my laptop and started the burn, my computer gave me a message there was an error in burning the disc, and I had to close WMP12.

  When I got the farm, WMP12 and then tells me to connect a burner and restart the program.

  After that, I looked for the drivers online set to level, or to the bottom of the slope to.

  But none of them worked.

  After that, I talked with a HP technician who told me that it is better to stick to the pre-installed operating system that comes with a computer and not downgrade or upgrade manually.

  She also said that because my computer was made for Windows Vista, it was the compatible operating system for my internal hardware.

  It gives me no drivers or anything to install.

  I should have come to Microsoft first, because now I realize that HP has nothing to do with Windows 7.

  If Microsoft, I ask you:

  When you install Windows 7 on an original Windows Vista laptop and that your CD/DVD writer works for about a week, then it stops working...

  What should I do next to fix this? :(

  Please help ~!

  -Kyo

  Hey Kyo - San,

  Given that the troubleshooter could not see the CD DVD drive, you can try to navigate to the following location in the registry editor and deleted the upper filter and lower filter keys and check if it helps you get the job of CD DVD player.

  1. click on Startand then click all programs.

  2. in the start menu search box type regeditand press ENTER. If you are prompted for an administrator password or a confirmation, type the password, or click allow.

  3. in the navigation pane, locate and then click the following registry subkey: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  4. in the right pane, look for UpperFilters and UpperFilter key and select it.
  Note You can also see an UpperFilters.bak registry entry. You don't have to delete this entry. Click UpperFilters . If you do not see the UpperFilters registry entry, you may still have to delete the LowerFilters registry entry.

  5. on the Edit menu, click delete.

  6. When you are prompted to confirm the deletion, click Yes.

  7. exit the registry editor.

  8 restart the computer.

  Note: Sometimes, this problem is due to two Windows that have been corrupted registry entries. To resolve this problem, you must use the registry editor to delete the corrupted registry entries.

  However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up and restore the registry, follow these steps in the KB Article: http://support.microsoft.com/kb/322756/

  Access the link below to learn more about the CD-ROM drive or the DVD drive that does not work as expected on a computer.

  http://support.Microsoft.com/kb/929461

  Note: the article above is for Windows Vista and the same applies to Windows 7.

  I hope this helps. Let us know the results.

  Thank you and best regards,

   

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Satellite Pro U400-15I - wheel of sound not working after installing Windows 7

  The wheel of sound on my Satellite Pro U400 - 15l does nothing after the clean install of Windows 7 to XP pro.
  I used the recommended software update tool downloaded from Toshiba. The VolumeIndicator.exe process is running and the sound works OK - but not under the control of the wheel! The Toshiba power control is not here, but this isn't a problem.

  Any suggestion is welcome.
  Bob Sheppard

  Hello

  Have you tried to update the audio driver of your laptop? You can check from Toshiba Web site for an update:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  You may notice any yellow exclamation mark in Device Manager?

• Satellite L500 - FN + F6/F7 does not work after installing Windows 7 SP1

  After installation of SP1 on Windows 7 64 bit does not work the screen brightness setting! 1.4.1 for Windows 7 64-bit installation Toshiba value added Package not help!

  Need help!

  Hey Buddy,

  > Installation of Toshiba Value Added Package 1.4.1 for Windows 7 64-bit no help!
  You have also all-new version of the Flash Cards Support utility? This tool is also necasary for the FN key function and can be downloaded on the Toshiba page too.

  Check this box!

• Buttons do not work after installing Windows XP to A200-1HV access keys above "F".

  Hello again!

  On the 1st sorry for my bad English = (Hot-keys close 'power button' Don't work.) I'm talking about the access key: browser, media, play/pause, stop, next button, the previous button. Are pilots have this key? I don't found drivers on the web page for this key.

  I have legal Windows XP SP3 with all updates.

  Of course you need software. I think that these buttons are controlled by the Toshiba CONTROL utility and you can find it on the download page of Toshiba. I just hope that you have updated the BIOS to the version of Windows XP Home edition. It must be 5.20. To work well WXP you need this version of BIOS.

  By the way: I don't know about you but I believe that SP3 is not yet supported, and I just hope that everything will work well. Otherwise, install Windows XP SP2 home edition. It should work without problem.

  Good luck!

• Keyboard backlit Y500 does not work after installing Windows 7

  Got a y500, love, installed Windows 7 (experience challenging, but glad I did now that it's done). Everything works like a charm, EXCEPT the backlight on the keyboard. By pressing FN + space does nothing. The keyboard does not blink when starting upwards, either.

  After repeated calls to the line of Lenovo, the responses I get are simply: we don't know why the keyboard backlight lights with Windows 7 installed.

  I don't want to go through the hassle to put Windows 8 on just for the backlight.

  There must be a way to activate the backlight of the keyboard while running windows 7. Lenovo, can you please go to the top of the chain of command to those who are working on updates of pilot and see if there is a way to make it work? Or tell me if I do something wrong?

  TL; Dr: keyboard backlight worked while Win 8 has been installed, put win 7 on, is no longer works.

  I would check the cable connections, the most likely problem.

  You can get a new keyboard on ebay for ~ $40... I'd rather spend than that being without my cell phone.

  http://www.eBay.com/ITM/400543129741?ssPageName=STRK:MEWAX:it & _trksid = p3984.m1423.l2649

  If the link does not work, you can search and Y500 keyboard, but others do not look right.

• HP TouchSmart 15-j003ed USB 3.0 Controller ENVY & LAN driver not working after installing Windows 7

  Hello

  A month ago I bought a TouchSmart from HP ENVY 15-j003ed. After that I installed Windows 7 Professional 64-bit, the USB 3.0 controller and the LAN port does not, even when I use the drivers from the HP website.

  All the other drivers work, how is it possible, and at - it someone has a solution for me?

  Now I only use Wi - Fi to connect internet and changed the USB controller in the BIOS to USB 2.0

  Please try the PCIe GBE 10/100/1000 Realtek RTL8111B / RTL8168B / RTL8111 / RTL8168 / RTL8111C / RTL8111CP / RTL8111D (L) / RTL8168C / RTL8111DP / RTL8111E / RTL8168E / RTL8111F / RTL8411 drivers directly from Realtek - http://www.realtek.com/downloads/downloadsView.aspx?Langid=1&PNid=13&PFid=5&Level=5&Conn=4&DownTypeID=3&GetDown=false

  and

  Intel USB 3.0 xHCI driver directly from Intel-

  https://Downloadcenter.Intel.com/SearchResult.aspx?lang=eng&ProductFamily=software+products&ProductLine=chipset+software&ProductProduct=Intel%C2%AE+USB+3.0+Extensible+host+controller+driver

  Please click the White Star of KUDOS to show your appreciation

• Windows Movie Maker does not work after installing Windows updates

  my film creator of windows XP home SP2 after obtaining updates (SP3 and others) does not work. How to fix this or how to get free a similar program for video editing?

  See if the following .dll file will help. The Windows Update agent, Wups2.dll file are perhaps not properly saved.

  Open a command prompt window (start-> all programs-> Accessories-> command prompt) and type the command:

  regsvr32 wups2.dll

  Let us know if that helps.

  Marilyn

• HP dv6 6c98sa - switchable graphics - AMD Radeon 7470 m does not work after installing Windows 8

  As per the title, I upgraded my Windows 7 Home Premium 64 - bit of Windows 8 Pro 64 bit, of course according to a lot of discussions here (which I've read through) the AMD Radeon stops working.

  I had it running using some Toshiba drivers which I can't make it work again since I did a new install of Windows 8 last night (I love not upgrades, the plan was to run the upgrade to make sure no problem then do a clean at a later installation) - FAIL!

  With the standard driver for Windows 8 my machine has an AMD Radeon HD 7400 m (Microsoft Corporation WDDM v1.20), but it starts like, or should I say fails to start and display the following error message "Windows has stopped this device because it has reported problems. (Code 43) ».  If I turn off the device and restart, then it does not show an error and says it's working very well, I'm not sure it's good.

  AMD Radeon 7470 m (PCI\VEN_1002 & DEV_6760 & SUBSYS_185D103C & REV_00)

  and Intel HD Graphics 3000 (PCI VEN_8086 & DEV_0116 & SUBSYS_185D103C & REV_09)

  The Intel HD Graphics 3000 is running driver version 9.17.10.2875 (17/10/2012), which I have updated via the utility Intel drivers update last night.

  Any help would be appreciated.

  I've used - ftp://ftp.hp.com/pub/softpaq/sp55001-55500/sp55092.exe

  Works fine now :-)