Neam Zvouka kao da napravim zvucnike da rade a zv karticu imam

Similar Questions

• HP first... of the RADs?

  where can I get the radian unit?

  If you are looking to "score" a number as a radian when the calculator is in degree mode, then you could try the following:

  Enter the number as usual, then use the 'UNITS', select 'Angle', then 'rad '.  This will add '_rad' to your number.

  You will now be able to do the following (where "pi" is the symbol for pi):

  Sin (pi_rad/4)

  and get 0.707...    <-sqrt 2/2

  In addition, in radian mode:

  Sin (45_deg) returns the same response (.) 707...).

• Version number of RAD image

  I use RAD to create an image of a cRIO. I chose to create a new version of an existing image. My new version number was 1.0.3. I had an error in the path of one of the names of files, so the recovery did not work properly, and no image has been created. When I corrected the error, the previos version number (1.0.3) was no longer available (try to use gave an error) and I had to go with a new version number (I chose 1.0.4). Is it possible to reuse the earlier version number? I tried to quit and restart RAD, without result.

  Gunter

  Ok!

  Just to let you know, this utility is open source, so you can go into the LabVIEW code and change the behavior of your specific needs, or discover the limiting of the version control.

• Replication and Deployment (RAD) Utility v5.5.2 error Image Retrieval Application

  I fight to create an image of a CRIO-9024. I hit the DIP switch mode security and power to bike for the cRIO so that he can start in safe mode. I downloaded the latest version of the utility RAD v5.5.2, still at the opening of the application, I'm prompted with the following message:

  RAD requires a feature that the software that you have installed. Please update the Configuration system OR version 5.5.1 or higher.

  Because I know that I have installed a version higher than that I just have to do it, assuming that it is a bug. The application recognizes my cRIO deployment target, select it and I have to do to get the picture of the application. I select the type of image as a new image of the application, give the image a name and continue by clicking ok. I then tried the navigation to a specific folder to store the image and continuing with the recovery and I get the attached request Image recovery error. I've read throught he other forums and saw that others have received this error because the directory C:/AppImages default was never created. SO I created this directory and allowed him to store in the directory by default and always received the application image retrieval error. I am at a loss from what to try next. I just need to create a backup, can my customer stored it in the case of defective or damaged cRIO. I tried to make it easy for them to do it themselves, but clearly, I'm in trouble. Is there another way I can support this place for them? No clue as to why I get this error?

  Thank you

  Josh K.

  Although it can be listed that you have a fairly recent version of the System Configuration, it's a good idea to update to the latest version.  I've seen questions similar to this in the past for which update Sys Config solved the problem.  Version 5.6 is the latest version:

  http://www.NI.com/download/NI-system-configuration-5.6/4517/en/

• Dev native BB in IBM RAD with WebSphere application?

  I work for a company that is internally our native code for our application. We have a thin client with all our web-tier in Java EE with IBM RAD and WebSphere.

  I havn't been able to get the BB SDK to download correctly rad in the ' help > software updates section. because it gives me a message of page 5 of unsatisfied dependencies.

  Is there a way I can get the BB SDK works correctly in RAD, or what I need to install Eclipse separately and make development in Eclipse.

  Thanks, I managed to get the Android SDK through the same process of work.

  So I contacted RIM and got the answer:

  'currently the BlackBerry for Eclipse Plugin will not work with IBM RAD'

  and why the rules exist:

  "We will check with our team of Docs to ask why it is still available if the feature does not work."

• How to develop the GUI of Blackberry in Netbeans (RAD).

  Hello

  I want to develop Blackberry GUI quickly.  so I prefer Netbeans IDE 6.5 but I'm unable to find drag and drop features of rapid development of applications such as JME. So please help if you know how RAD blackberry 4.7 on netbeans 6.5

  Thanks in advance.

  -Jitu.

  If you want to do a moped for Blackberry then use Netbeans with the Visual Designer.

  But after all, do not forget to use the preverify.exe utility (located in the JDE/bin folder of the Java development environment).

  It is necessary to check the MIDlet jar bytecode to meet the requirements of the API of the RIM.

  In case you want to create the GUI with net.rim classes in Netbeans there is no way, using MDS Studio.

• 12 c and LDAP for RAD formulas

  Hello

  I have problem with 12 c and OID (11.1.1.7) forms.

  Usually, we stored all the connections of the db for forms in OID. I'm trying to configure forms to get the db connection but without a bit of luck.

  Safety forms, there are 4 options:

  (1) administration of OPSS forms resources

  (2) administration of LDAP forms resources

  (3) associations of Runtime LDAP forms

  (4) migration of resources

  In option 3), I managed to connect with the OID forms, but in the other three options 1, 2 and 4, I 'is not a valid connection. Correct entry of LDAP credentials to continue. »

  I checked the credentials for sleep and the port of oid, everything is OK.

  Anyone?

  Concerning

  Matthew

  It is confirmed by the Oracle we have a bug here:

  Bug 22336350 : CANNOT CREATE the RAD FOR FORMS 12 c WITH IDENTITY OID AS STORE

  Concerning

• How do you install rad lab on Adobe Photoshop CC?

  Rad lab works fine on adobe CS6 but not Adobe Photoshop CC. How to solve this?

  Hi armandoa,

  Please read the installation instructions provided by the manufacturing of Plugin. They are compatible with Photoshop CC.

  Check out there website update for the plugin.

  If you're looking for Actions, see migrate presets in Photoshop CC

  Kind regards

  Assani

• Default forms and RAD

  Hello!

  I want to create a default RAD for forms to create an individual wheel for each customer. I followed the Doc ID 1390533.1 but the forms keep asking login information - for some reason, do not use the default RAD. If I create an individual RAD for the end user; everything works perfectly.

  Is there a special way to create value by default RAD?

  Note: I use forms 11 g + 11 OAM.

  Best regards

  You're talking about the proper document to set up the default RAD. Please let us know what error message do you receive when you access default rad. check also if one message found in the formsapp_diagnostic.log.

• You're Rad if you know how to do this...

  Hello my colleague Flashophiles
  
  So, I bow down to you if you know how to help me with this one.
  
  I have a MovieClip in my Flash file that emulates a signature under development by animating a mask that covers more than a little more of the underlying bitmap (of the static, real signature) image by image. I am interested in allowing the signature public static color in the bitmap to dynamically set. Here's the pseudo-code with that until now I came:
  
  -Access the bitmap in the MovieClip
  -Replace each pixel of the bitmap black (somehow) (signature is black, the background white) with a pixel that is the chosen color
  -addChild the MovieClip to the main timeline
  
  I am also considering separating the bitmap of the MovieClip and just adjust the mask MovieClip dynamically...
  
  Any ideas on a any part of the present? You're rad!
  
  Thank you
  Graham

  Sorry hutn.jimbo - who doesn't, this will create all the bounding box of the selected color. We need get here a little 'amateur' ;)

  You can do something like this using the bmp.threshold method - however, 'how' you do are different depending on the way in which in which you have instantiated the bmp. If it is "placed" on the stage in the MC as you described, it will be much harder, because I am assuming that the first image of the MC will have the bmp basically 'not visible' so that it can be revealed by your mask animation. should that happen, it's that you attract the bmp in a bitmapData object and run the method of threshold in search all "black" pixels and set them up the new color. It would be much simpler if the image was brought to the vibrant scene in which you can perform these procedures before the image/mc becomes visible.

• Why must my RAD-100ax 17 files?

  F:\DCIM\100MSDCF contains images. FLOW and CLIP seems to have low resolution and Hi res video files in this order. THMBNL shows the photos.

  How and why to use the other?

  What I have to copy it into the folder used by my Publisher (first 14 elements)?

  Hi HiView,

  The different folders on the card matches records where the photos and videos are recorded and also some system settings that you can change on the camera. They also contain data of the photos and videos that you saved. We do NOT recommend delete the folders.

  Only files that you will need when you import files in your software are the DCIM (photos), STREAM (AVCHD), MP_ROOT (MP4) and CLIP (4K videos).

  We suggest you use PlayMemories home to import all your files on your computer without having to open each file. All the files you appears on the import window and can be imported into your desired folder on your computer. You can then extract or open these files in your editing software.

  If my post answered your question, please mark it as "accept as a Solution. Thanks_Mitch

• LabVIEW: No communication with the RAD-2 USB adapter table.

  Hello

  I try to use a DL2 - N adapter USB to I2C/SPI/GPIO Dinah (https://diolan.com/dln2). This constructor provides drivers for the Council as an example Labview vis I want to just use them to access all interfaces through Labview. After that, I design a test configuration for our latest range of products using this adapter card.

  What I did:

  (1) new installation of Labview 2014 (version evaluaton). System: DELL Precision M6800 (i7), Windows 7 Professional SP1.

  (2) install the drivers OR VISA and NOR-488. 2 (14.0).

  (3) install the drivers from manufacturer as explained on the Web site of NOR.

  (4) run Labview.  I can see instrument pilot screws under the range of function and run the example screws so far, ok (I guess)

  (5) run NI MAX. No listed USB port. Only COM1 and LPT1 (printer port).

  (6) I ran a few windows test applications provided by the manufacturer to access all the NXP microcontroller interfaces in the DLN2. Everything works. I can read the analog/digital, power digital input values and use the SPI and I2C (I see the SPI/I2C frame Sin a scope).

  I spent a day through the various links in the Web site of NOR (have watcheing almost every video demo on the site) and are still not able to guess why Labview can not see my USB device.

  Any clue?

  Kind regards

  Jose

  Hello

  Problem solved. After contacting with Dinah (the manufacturer of the adapter card) they updated the driver library. Now the USB communication and all peripheral work of the microcontroller. I have a UART, SPI/I2C (master and slave), GPIO 48 and 8 inputs analog (10 bits to 1 MHz). All accessible via USB and for less than $ 200 USD (that's way less the HW OR equivalent).

  With Labview, it can be used without any problem. Not a Council weird at all, if you know something about the material.

  Bravo for Dinah!

  Jose

• frequency response plot DFD rad / s

  Hello

  I'm trying to get the filter frequency response using the frequency plot vi DFD response. Is it possible that I can get the mangnitude and phase response of the plots of the frequency in radians per second? Now it gives me focus of frequency in Hz.

  Suni-

  The output of the frequency plot DFD response is an array of clusters of wave graphic form.  You will need to index the table out each graph (there is one in your example) and then bring out the start frequency and out of the frequency of the cluster so that you can convert to radians and insert and rear.  The attached picture shows what I mean...

  -GN

• Kako da ubrzam vindovsa rad 7 I da uklonim nepotrebne datoteke

  kakoda ubrzam vindovs 7 I oslobodim racunar bespotrebnih datiteka koje knew zasrarele

  Microsoft answers site provides support in English. The following URL Uniform Resource Locator () will ensure that you receive support appropriate for your location information. Open the link and

  Select your region from the drop-down list, and then click the arrow to continue.

  English

  Microsoft support:

  http://support.Microsoft.com/common/international.aspx

• with the help of rader adobey how to scan a picture

  using player adobey how to scan a picture?

  Player doesn't have the capacity for analysis. You can use Adobe Acrobat to scan to PDF, but it is not free as a player.