NEC ND - 1100 has DVD + RW hardware/driver

Similar Questions

• NEC ND-6500 a DVD +-R/RW drive satellite 2410-504?

  Can someone tell me if a NEC ND-6500 is DVD +-R/RW drive will work in my laptop Satellite 2410-504? I tried that provided new Assembly, but the BIOS did not recognize and give up an IDE #1 error message at startup. I don't know yet if it was a faulty drive or if the player is simply not compatible. Any help with this would be greatly appreciated.

  Hello

  you might find some useful information here:

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=3720&MessageID=11933#11933

  BR

  Tom

• M40: DVD/CD-RW drive has stopped working.

  Good day all. I have a Toshiba Satellite M40.

  For a long time, my DVD/CD-RW player just stopped working. She stopped reading any kind of optical discs - no data, no DVD or CD of music.

  The first step I took was to re - install the Windows XP operating system. It worked, but the problem comes back shortly after. The second time, I had to install the drive manually, and that worked for a while.

  The problem came back a third time, but this time, the disc of additional software supplied with the notebook, which includes the driver for the drive, does not. I get an error reading 'CD-ROM drive not found '. I tried to reinstall the operating system, but the drive does not read the product recovery CD. Windows starts just straight up normally.

  So, my faithful laptop for some reason any does not recognize the existence of the DVD/CD-RW drive, and I am at a loss for what to do. Any ideas?

  Thank you in advance,

  Desperate Nigeria :(

  Hello

  What is the status of the drive in Device Manager? Is there some whoo sign indicates that the reader may not work properly. Go to properties and check the status of the device.

• DVD/CD rom drive reads CDs but does not read the DVD.

  My Dell Inspiron 1300 laptop has a DVD/CD rom drive.  It loads all the CD I want and them automatically opens on the D drive.  When I put in a DVD movie it will not play.  I open my computer, and then look at the D drive, and it does not even recognize that there is a DVD inside but it shows a screen of a CD that I put in there.  This tells me that it works and it has a green light on the side which shows.  Also, when I insert the DVD it makes sounds as it tries to recognize, but then it stops and does not appear.  Can anyone help?  I really appreciate it.  I'm not very savvy computer.  I know that some in this topic because I am a teacher and try to catch up with things, but I'm certainly no computer technology.  Thank you very much!  Let me know if I need to give more info.  I think the reader is Sony CRX835EK but I'm not 100% sure on this one here.

  If your Player reads cd but not dvd which indicates that the material works very well. You need to change the registry inorder to solve this problem.

  1) click on the start menu
  2) click on 'run '.
  (3) type "regedit" and click ok
  4) go to the key of the string "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}.
  (5) delete "upper filters" and "lower in the right window.
  (6) right click on my computer in the start menu.
  7) click on properties
  8) go to the Hardware tab
  9) click on Device Manager
  (10) expand the dvd/cdrom drives
  (11) made a right click the dvd rom and click on uninstall
  (12) restart the computer

  After the reboot, windows should automatically install a ROM clean disc and read DVDs very well if you have the correctDVDdecoders

  

  .

• DVD/CD RW drive

  Why my DVD/CD-RW drive is not reading or playing a DVD of CD? It makes a noise as if he were reading the disc... then nothing happens.

  Hello

  Could be that the drive has developed a problem, try using a cleaning disc.
  Can be wear and must be replaced.

  =====================================================

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

• T61 DVD/CD-RW drive is unable to read and hangs

  Hello everyone, I hope that people still visit this area of the forums!

  I put highlighted and bolded the symptoms and make them easier to find.

  I recently bought a T61 6457-C15 on eBay and were in the process of setting up and customizing to my tastes. When I got the laptop, it looked as if Windows had been restored to the original state of the factory, as well as some free software, so I proceeded under this assumption. First of all, I used Windows Update to download all the updates that he could find including IE8. I wanted to have a program running on my computer before anti-virus I used a browser to access the internet. I ran IE8 and went directly to the Microsoft Security Essentials Web site and downloaded the installer. At this point, I tried to remove the Norton Internet Security pre-installed and expired using the built-in uninstall, but it failed. A message box jumped in saying that I needed to put the Norton installation disc in the CD-ROM drive so that the uninstall program can find a file of Norton support. My computer did not come with all discs, but my mothe had bought Norton 2008, so I took the disc and put it in the drive. The training started shooting immediatelyand the uninstall program found the file he was looking for in a few seconds. File support directed me to the site of Norton to get their removal tool, which has removed Norton from my system in the short term. Afterwards, I ran Microsoft Security Essentials install program and obtained MSE running on my computer before anything else.

  Then I went on the Lenovo Web site and he had my automatic detection system. That took me to the support page for my system, when I went to the page «Downloads & drivers» I downloaded the connections to access and ThinkVantage Toolbox for Vista 32-bit (my OS is Vista Business 32-bit). I then used Lenovo System Update to get all the updates that are deemed necessary to Lenovo, including those for itself and the software and firmware components system. There were 35 or updates more suggest, and I trusted the software, so I started downloading all. I don't know, but I think that an update of the DVD/CD-RW drive was included in the list, but I don't remember if it's auxiliary software, drivers and firmware. After the Lenovo system update was convinced that she had all the necessary updates, I downloaded Revo Uninstaller and began to remove my computer from uneccassary and unwanted programs and cut the list of start-up. I did not touch any components Windows or ThinkVantage, and I searched each of the programs online, so I don't know I have to not delete or disable all drivers or file system or something to Lenovo. I removed mainly produced Apple and software doesn't work on my system, including an integrated camera driver (my system doesn't have a built-in camera) and third-party programs that were already missing files or otherwise unusable when I got my computer. Until now I had used a gigabit ethernet connection to download the software; I had not used the DVD/CD-RW drive with the exception of the one time wherever I mentioned earlier.

  Now that I have my system set up for my taste, including customization and power settings, I started to install my first program: Command & Conquer the first decade since a DVD-ROM. When I put the disc in the drive and closed, it took a few seconds for the drive to the start and once he did, he was constantly running at high speed and I could hear the drive back quickly in perpetual motion. After a few minutes menu finally appeared disk installation, so I clicked on the button install. I waited several minutes, but nothing happened, so I tried to view the contents of the disc by going to my computer > DVD/CD-RW drive (D, right, click on and select explore menu. ) When I did, the address of the Workstation window bar began to fill with a dark and said gray progress bar "loading (D", I think that with the name of the player or drive after him.). After he took several minutes to fully complete, nothing happened. I waited a few minutes to see if anything would change, (Nothing in fact), I clicked on the X button in the upper right of the window to close. A few minutes and clicks later, the Workstation window was labeled as (not), and the window itself has become dimmed. I started the Task Manager and tried to close the my computer window, but the entire Windows desktop disappeared with her, saying that he will try to restart. Even the Task Manager became inadmissible and quit after you close the workstation. After a few minutes of watching my background (and nothing else), I've ejected the disk, and Windows Desktop reappeared immediately and acted as if nothing had ever been wrong.

  I checked the Device Manager, but neither the DVD/CD-RW drive, nor any of the ATA controllers have been marked; in fact, they all said that they worked correctly with the drivers updated. I ran the diagnostics of the Toolbox ThinkVantage on the disk using a data CD, a CD and a DVD-ROM are different, but in each case, the drive failed the tests and a message jumps to the top box, saying that the discscould is not read because they have been removed or there is a hardware problem. I checked the discs that both before and after I took them out, and they were not scratched; also, all disks are made editor with a company of software or music. I restarted my computer, started the Rescue and Recovery and Ran PC-Doctor from here option. I ran the same drive read tests with the same results of failure. All the time the car was behaving in the same way he had when he did not first read a Disc. Then I removed and cleaned the drive both inside and outside with a can of compressed air. I also cleaned the ultrabay himself. Finally I tried to fix it with Microsoft Fix It, but when it is automatically ejected from the car and I put a drive, the disk was stuck in the drive and Windows frozen as before. I had to restart Windows two times (once with a BSOD) to take out the drive. When the disc has been removed the computer is back to its normal operation once more.

  Please help me, my DVD/CD-RW drive is a Matshi your UJDA775, my operating system is Windows Vista Business and model number of my T61 6457-C15. I tried all the troubleshooting patches and none have worked. I tried the update drivers and using diagnostic software and they have not worked. I tried to disable drag-to-disc burning and it did not work. I have treid remove and clean the drive and that did not solve my problem. I noticed that the driver for the controller "Intel(r) ICH8M-E/M SATA AHCI" is the only related driver that can be undone, so maybe that could fix. I also wonder if a firmware change caused this, and if so, if there is any way I can cancel that. The only other difficulty I have heard of that I have not tried is changing the registry, but I hesitate to do so. I have not tried to boot from the CD drive because I have no bootable CD and I'm afraid that my computer can stay stuck in this mode. I hope someone can tell me what I can do to try to solve this problem, preferably without destroying my computer. Thank you for taking the time to read my post.

  P.S. Just adding a note; I went through the stories of the Microsoft and Lenovo update and related updates only I could find were: ThinkPad BIOS update utility easy ejection, driver Intel Matrix Storager Manager for Windows (32 bit) and maybe one of the Intel chipsets Support two Vista updates. I tried to roll back the driver AHCI, but it has no effect.

  Well, my problem is solved and here's how. I had some difficulty in finding how to contact technical support from Lenovo; online options directed me to the IBM support Web site, which was clearly designed for businesses. By selecting the option "Call technical assistance" on the Lenovo Web site and then selecting my country gave me a number of hotline 24/7. After about five minutes of waiting, a young boy by the name of "Tyrese" answered (I may be misspelling his name), but the connection was so bad that we could barely hear each other. Although he semed eager to help, when I told her my problem the first things he proposed were simple, like cleaning the disc, however, when I told him all my efforts, described above, to solve the problem myself and him read the paper since the diagnostic Rescue and Recovery program, after he checked against its computer database error codes quickly He said that the only solution was to launch a new drive. I was pleased to have secured such a resolution successfully appealed for support in less than fifteen minutes; Apparently, all the work that I did trying to fix it myself had paid off in a way. Unfortunately, although I tried to give my address for him, some of them stay out of the address label, which caused trouble to receive the new drive. Once I got it, I installed using the uninstall & remove (former player), stop, start, insert & install (new disc) method that I've referenced previously in this topic. I use the new drive since then without any problems, so I guess that the only solution was to replace the disk. Also, I noticed that the new drive is a Hitachi, maybe a T400/410 and T500/510 Ultrabay Slim drive, which should help to avoid the problems that other users have had with readers Matshi - ta more elders. I hope this description helps anyone else having a problem with the optical drives on the T61/61P.

• Satellite L10 DVD Super Multi Drive - E/s of entry Error Message

  Does anyone know why, when I try to play a CD or CD-ROM, I get a box saying i/o error of entry?
  I have a Satellite L10 with a DVD super multi drive. It can read DVDs and DVD ROM

  I thought maybe it was a cable connected the drive itself, but if it's that I need how out of the car and how to support.

  I tried updating the driver and uninstall it then reinstall the drive, but I still have the same problem.
  Cannot use the accompanying software as is all the cd.

  Please can someone help me.
  Thank you

  Hello

  In most cases the entrance of e/s, error message is related to a hardware malfunction (CD/DVD drive).
  The readers of the lens laser can not calibrate properly and therefore it can not read the CD inserted.
  These errors are not uncommon and occur mostly after a long period of use due to a material stressed.

  But let's check the last possibility of solution;
  Go to Device Manager and remove the drive from the list of devices CD/DVD.
  Then start the registry (regedit) and delete the Upperfilters and Lowerfilters completely from the following registry key values:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  Then, restart the computer and check if it of possible to read CDs.

• I can not eject a dvd from my drive iPhoto super-cannot see the drive open up Adobe Photo Elements and organizer and then apps get hung up "not responding" and cannot do anything - I've fixed dozens of times w msg success drive.  Help

  I can not eject a dvd from my drive iPhoto super-cannot see the drive open up Adobe Photo Elements and organizer and then apps get hung up "not responding" and cannot do anything - I've fixed dozens of times w msg success drive.  Help, please.  Thank you!

  Hello golden2,.

  I understand that you have a DVD picture in your SuperDrive drive, but it is not mount on the desktop and will not eject.

  Please, try the procedure described in this article using the disc is ejected.

  Get help with the SuperDrive slot on your Mac - Apple Support loading

  Do not eject discs or discs eject slowly

  1. If the drive ejects discs slowly or appears to have difficulty, insert and eject a disc several times. Check the disc to see if it has a label or other material stuck to the disc which increases the thickness. Remove the label if possible.
  2. If the disc does not eject, try pressing the eject on the keyboard button. Some older keyboards may use the F12 key to eject the disc.
  3. If the disc does not eject, try dragging the icon of the disk to the trash.
  4. If the disc will still not eject, try to hold down the mouse or trackpad button after you restart the computer. The Superdrive should attempt to eject the disc.
  5. If the disc still does not eject, reset the System Management Controller (SMC) and repeat steps 1 to 4.
  6. If the disc still does not eject, Contact Apple or an provider of services authorized Apple, or make an appointment with a Store Apple Store for further assistance.

  Take care.

• Satellite Pro A120: DVD/CD-RW drive does not work

  Hello: the dvd/CD-RW drive does not work. apparently it has been disabled somehow! Any ideas on how I can turn it back on?

  Have you tried the Device Manager and it says it works normally!

  Any ideas please?

  Thanks :)

  > apparently it has been disabled somehow
  I put t think that the disc has been disabled!

  How someone or something should turn off the drive? You have disabled the drive? I don't think so!

  You said that the drive appears in Device Manager. So I guess that the drive is enabled and is recognized by the OS.
  You are getting error messages or what's wrong?

  Perhaps the reader can read or burn CDs or DVDs.
  This happens if the lens of the drive cannot calibrate properly and can not handle the inserted media.

  Maybe the replacement drive is required!

• Burn DVDs with DVD/CD-RW drive

  I have a DVD/CD-RW drive is anyway that I can update the software or the disk hard so that it can burn DVDs / my reading on the subject, I need to change the physical disk drive. Is this correct?

  Thank you

  Jeremy

  Hello

  If it's a DVD-ROM and CD - RW "combo", then you will not be able to burn DVDs with the device, only the CD.

  The front of the tray has normally symbols tell you what features are supported.

  Tricky

• Year Error Occurred While ejecting DVD/CD-RW drive

  My dvd/cd-RW drive is recognized in windows 7 and said that the work, but when I go to open it, I get "an error occurred eject disc dvd/cd-rw" and nothing happens. Two days before that I had burned a recovery of AVG disk barely shoot a problem on another computer and everything's fine. The next time I went to use the error message appeared. I reinstalled the drivers and delete the upper and lower filters in regedit as recommended by Microsoft, with no result. Any help will be appreciated,

  I replaced e DVD/CD player and everything works fine now. The problem was the original CD/DVD drive has failed.

• The DVD R/W drive is not recognize the presence of any media in the drive. Whenever I try to play the media, the door opens and I get the message "insert a DVD and try.

  The DVD-R? Drive W is not acknowledging the presence of any media in the drive. Whenever I try to play the media, the door opens and I get the message "insert a DVD and try. Help me fix this error condition, please.

  This has happened a lot of tme, since the last 3 months and I am unable to play any CD or DVD. I have trried Windows Media Player, Real Player, Quick Play and even the free VLC Player, giving the same result unusable.

  Mine is a HP Pavilion 6407dv laptop with Windows Vista Home Premium pre-installed.

  Will be extremely grateful for the quick and useful help.

  Thanks in advance.

  -Rajaram

  Thanks for your reply. It was very helpful / sorry your proposed solution has not solved my problem. Kind regards. -Rajaram77

  Hi Rajaram77,

  ·         Are you facing this problem with all DVDs?

  Try this Microsoft FIXIT who could help you with the problem.
  http://support.Microsoft.com/GP/cd_dvd_drive_problems/en-us

  Bindu R - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• CD/DVD-ROM problems, drive not detected AND the category of CD/DVD-ROM does not appear in Device Manager

  I'm having serious problems here. My CD/DVD-ROM drive is not detected and will not answer. I can ONLY open the drawer at the beginning of my computer laptop startup. The drive does not appear in my computer and the category of CD/DVD-ROM does not appear in Device Manager. Therefore, the "uninstall/reinstall" is impossible if the computer behaves as it has never been this drive now or never. Previously, I was able to use it as there was no problem, but someday, it's simply not there.

  http://support.Microsoft.com/kb/982116/en-AU

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  See if the information above solves the problem.

  See you soon.

  Mick Murphy - Microsoft partner

• DVD/CD RW drive does not work after update from Vista Premium for Vista Ultimate

  I have a gateway notbook, series P-7805u - 8400.  DVD/CD RW drive was working fine until I upgraded to Vista Ultimate.  Now, I can't even restore to a point before the update, nor that I can run my recovery disks.  I have to correct this problem.  I hate not having a phone number where I can at least speak to a technician or a place where I can scream my lungs.  I need help, real help.

  Something is terribly wrong when you spend too much for a product that doesn't work not as advertised and then you can't get the help you need when you need it.  No wonder they want to keep things civil here...

  Oh my God, bless you... it works!  After removing the filters (try manually this hotfix if the Fixit 314060 does not
  ( http://www.pchell.com/hardware/cd_drive_error_code_39.shtml) after reboot, everything is back.  THANK YOU, THANK YOU, THANK YOU.

• get laptop but only dvd/cd-rw drive is running. LCD screen won't even turn. __

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: I have Windows Vista Home SRVPK 2

  Never had any problems b4

  I turn on my laptop and the only thing that happens is the spins of dvd/cd-RW drive

  the screen does not light or the light of the hard drive on my laptop

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hello

  Hardware problem and you need help from a computer store real (not the leeks and glances at a BestBuy
  or other BigBox stores) or system manufacturer support.

  We hope you sort.
  Rob - bicycle - Mark Twain said it is good.