Necessary allow the passage of two following ip addresses

Hello

I need allow the following both the ip address from the outside world through our firewall PIX515e.

I get an error on ip and subnet mask when I try to enter in these.

Anyone know the correct syntax?

The IP that I need to allow any access to are;

207.236.99.201

192.206.158.10

Any help or advice or suggestions is greatly welcome!

TIA,

Gary

access-list (name) allow ip 207.236.99.201 255.255.255.255 any

access-list (name) allow ip 192.206.158.10 255.255.255.255 any

Replace (name) with what you want to call the access list.

This will allow unrestricted access to those IPs to all domestic destinations. If you want to restrcit certain guests to replace everything with the IP address and the subnet mask.

Then apply the access list to your external interface:

Access-group (name) in the interface outside

HTH & rate please.

Tags: Cisco Security

Similar Questions

  • How to divide the screen into two parts in order to see the two different parts of the same file? [Suggestion] [Android]

    I am Brazilian and I use Adobe Acrobat Reader DC a lot. I would suggest an implementation of features present in the PC, I missed a lot of things on Android, which is 'New window' or something like that, like split the screen into two parts in order to see the two different parts of the same file.

    For smartphones, its use is restricted, but for tablets, it can be really useful, because it allows the display of two distinct points of the same file,

    I have reduced considerably the use of paper using this application, however, I need to navigate the file always pick up a few points seen earlier, which causes a lot of discomfort compared to printed documents.

    This is a suggestion, but I would like it to be considered.

    Thank you for your request. We have taken note of the same and must try to integrate it into one of our future releases.

    Thank you.

  • Custom properties to allow the applicant Blueprint set the IP address and select a network

    Hello

    I have a property definition that defines


    VirtualMachine.Network0.Name

    This provides a drop-down list with the preset values, by which an applicant may select a network to which they want to connect their virtual computer. It works perfectly and the VM has asked is connected to the respective vSphere port group.

    I try to combine the above property with the

    VirtualMachine.Network0.IPAddress

    I have this Setup to allow the applicant to specify an IP address. Whatever the applicant put slot shape that is assigned the IP address simply network profile and the specified user address is ignored. This happens if I configure the property above in a group of properties or directly on the plan of action through custom properties.

    Any ideas?

    I think the confusion here is with the objects on network on the design canvas.

    I worked on a similar solution this week. I need the customer to select the network and to set an IP address. Ultimately, this does not work if there is a network object on the canvas of the design. We have to finish with that.

    Second, you can't assign network properties to a component of virtual machine on the EHR Architecture directly. The designer will complain if you try and these values are set directly. The properties must be part of a group of properties.

    So for me, I have a property group with:

    VirtualMachine.network0.Name

    VirtualMachine.network0.Address

    VirtualMachine.network0.SubnetMask

    VirtualMachine.network0.primarydns

    VirtualMachine.network0.Gateway

    Under the definitions of properties, I have a drop-down list of values for virtualmachine.network0.name.

  • IPhone 7, there will be an adapter jack allowing the two using headphones AND charger?

    IPhone 7, there will be an adapter jack allowing the two using headphones AND charger?

    Hello

    Apple has not yet announced a.

    You can submit your comments and suggestions to Apple here:

    https://www.Apple.com/feedback/iPhone.html

  • Message "do you want to allow the following program to make changes to this computer?", in windows 7 "

    I just got this new laptop, and I got tired to remove my accout paswsword so I have things that him... and now every time I try to change things it appears: "do you want to allow the following program to make changes to this computer?  It then invites me type an administrator password and then click Yes. and there is no space to type my password... and also I can only except the No. I can't insert a cd... I have HELP lol

    Access is denied.

    now what? He still does not

    This happens because only Bikesh T jumped an essential step on many machines. Here you go:
    1 log in under an administrator account.
    2. click on start.
    3. type the three letters cmd in the search box.
    4. press on Ctrl + Shift + Enter
    5. click on "run as Administrator".
    6. type the following command and press ENTER:
    NET user administrator / Active: Yes

  • Whenever I use Adobe Creative Cloud, I have the same question; do you want to allow the following program to make changes to this computer. Whenever I click OK. But the question is always every time. I have download the new versin of the designer c.

    See the previous question.

    Please follow every time I use Adobe Creative Cloud, I have the same question, you want to allow the following program to make changes to this computer. Whenever I click OK. But the question is always every time. I have download the new versin of the creative c

    Double Post

  • PowerPoint does not allow me to view the video and I followed the procedure all recommended them, what to do now?

    I try to add a video to my Powerpoint, but he repeats to me it is uanable to view. I have the latest version and followed the steps that were recommended but it still not allow me to view the video. What can I do?

    What type of video file you are trying to add? If you can't get to display video in http://www.youtube.com, that means flash player is installed and works very well.

    Please contact supplier (Microsoft) for help with PowerPoint.

  • How can I see where the letters are on the keyboard after the passage for the french, Spanish or German

    I use a standard keyboard, but write in Spanish, German and French and English. How can I see a Visual of the key Governing Council after the passage of languages so I know where the special keys are for each language?

    Tuesday, July 17, 2012 17:42:37 + 0000, DavidSouthard wrote:

    I use a standard keyboard, but write in Spanish, German and French and English. How can I see a Visual of the key Governing Council after the passage of languages so I know where the special keys are for each language?

    If I were you, I would not go to all languages. You can get all the
    These special letters on the English keyboard with the help of a third party
    program. I use a program background small freeware called AllChars.
    This allows me (in all applications, type many common special characters
    (many of them are used in other languages) by pressing the key ctrl
    followed by a combination of two-character mnemonics.

    For example, for n the two characters are ~ and n. "C is for c, and, for u, you and.

    To get it, go to http://allchars.zwolnet.com/

    Ken Blake, Microsoft MVP

  • I don't see the option 'Allow the Apple Watch unlock'.

    Everything is set up according to the instructions, but it does not show. Early 2013 MacBook retina

    Hello Russbude!

    Here are the instructions that you need to follow in order to allow the ability to unlock your Mac with your Apple Watch. I will also link to the Apple Guide which are instructions, in this way, you will have access to the manual for future reference. Good luck!

    Unlock your Mac with Apple Watch

    If you have a Mac (2013 or later version) with macOS Sierra, your Apple Watch can instantly unlock your Mac when he wakes up from his sleep. You must be connected to iCloud by using the same identifier Apple on your Mac and Apple Watch.

    To use Auto unlock, you must have a password for your Apple Watch - open settings , type the password, type activate password on, and then follow the instructions on the screen.

    Turns on automatic unlocking. On your Mac, choose Apple menu > System Preferences, click Security & Privacy, and then click general. Check the box "Allow your Apple Watch unlock your Mac". If you have not enabled your iCloud of two factor authentication account, follow the instructions on the screen, and then try to select the check box again.

    For more information about two-factor authentication, see the article Apple Support for Apple ID two-factor authentication.

    Unlock your Mac. If you wear your watch, wake your Mac - no need to type your password.

    Tip: Make sure your Apple Watch is on your wrist and unlocked.

    https://help.Apple.com/watch/#/apd4200675b8?CID=ACS:applesearch

  • Detect the shift in two consecutive low contrast images

    Hello

    To determine how fast a sample of ice sliding USB camera (rate of about of 30 mm/min) I head to align an image every 5 ~ 10 sec and then compare the two images. I'm fighting to get a robust method to determine the displacement. The main displacement will be that in a sense however ice may move a few pixel widths in the other direction as it slides in front of the camera.
    Currently I am comparing the two images taking a large (400 x 800 pixels) KING of the second picture, then taking the pixel values average of all the columns in the two images that then allows me to subtract 1 d arrays that result and find the position where the difference is minimal.
    This works very well for the "perfect" images but no longer reliable with less then perfect images.
    Because the images are samples of ice with very little "features" (not counting the odd are bubbles) and low contrast, I feel that I have to rely on profiles in levels of medium gray rather then a 'function' follow-up or detect an edge etc..

    The berries average grayscale of the King plotted in the graph to see the clear peaks and valleys, so another method would be to match the data but I don't know how to do it again.

    Any suggestions on how I can better determine the displacement between the images? The method should relatively quickly because it must be in 'real time', i.e. within seconds.

    Thanks as always for all of your help.

    Jack

    Hi again

    Advice of Follwing Mike subtract images I've played around with this feature and have now the principle works well.
    In case someone else I would try something similar please see attached the VI and two images of the example that I used to experience.

    Well yet, which doesn't seem to work, it's the method of detection of peak/Valley. Any width I put may not find the Valley... suggestions welcome!

    Have a great day.

    Jack

  • 4730 proBook s: what version of the BIOS allows the activation of virtualization technologies?

    I use Oracle VirtualBox with 7 VM Linux on my ProBook 4730 of s (OS is Windows 7 64 bit). Somewhere around the BIOS update F.20 my machines virtual Linux no longer works, because of virtualization technology has not been enabled in the BIOS. I tried to enable it in the BIOS settings, but he refused to be activated. So I followed the instructions to return to the correct known copy last BIOS on the recovery partition, and yet I could not enable Virtualization Technology in the older BIOS revision.

    Then I went the drivers and software from the HP Web site section for my ProBook and downloaded the revision of BIOS Feb 2011 (apparently the earliest possible review of BIOS for my laptop model) and then flashed my BIOS with this revision. And virtualization technology setting STILL refused to activate it.

    I've seen in this thread in HP forums:

    http://h30434.www3.HP.com/T5/notebook-operating-systems-and/HP-ProBook-4730s-BIOS-cannot-enable-virt...

    anyone else with the model of my laptop had the same problem and the same symptoms: VMs worked up to a point in time and at that time there the Virt. Technology implementation option in the BIOS could not be reactivated.

    So my two questions are:

    Any available for this model of laptop BIOS revision allows the activation of the option of setting of virtualization technology?

    and,

    In the event of a revision, which one is it and can provide you a link where I can find a downloadable copy of it?

    LTW

    OK, after you call the tech support of HP, I found the answer to my version of this problem. When I tried to activate the virtualization technology in the BIOS, I was logging in BIOS using my account in the BIOS. At least for me (and probably for others too, since it is advice from HP support gave me) it was bad. You must log in with the account Guest User of the BIOS BIOS, and when you do, a lot of parameters of the BIOS, including virtualization technology, can be turned on/off. So my problem is solved.

  • Lost all audio on the month or two there.

    On------.

    About a month or two before, for some reason, one day, all of a sudden I had no Audio whatsoever.  When I go to YouTube I get lists and can click on any video, the video comes and plays - but no sound!  I got the advice of onliners who know a LOT more about computers, I also tried my server (comcast) & never get direct responses (windows), if they respond at all (also use excuse that it is not on their end maybe try Dell, windows or Comcast) frankly, you're my last choice because I sent a couple of times and never had ANY response (s).  I hope that this time will be different.  It's no fun to have all these videos & not being not able to hear the songs their mouths are turning to.                        Thanking you in advance!    Patti T

    You get any audio at all - like the normal Windows and beeping sounds?  Which would decrease the chances that the problem is related to hardware (which could be like things).  Do you have a Dell?  If Yes, you can have a program included diagnosis (mine is activated by pressing F12 immediately after pressing the power on button) - and which allows to test the audio hardware (at least partially).  Another thing you can try is to download the drivers for sound card latest (compatible with your version of Vista) on the website of Dell (or the web site of the manufacturer of the card) and install it to replace what you use right now.  Follow these steps to get the drivers: http://pcsupport.about.com/od/driverssupport/ht/driverdlmfgr.htm.  Once you have the drivers, you can install them via the Manager device as follows: http://www.vistax64.com/tutorials/193584-device-manager-install-driver.html.

    If this does not work, please transfer your question in music and its Forum: http://social.answers.microsoft.com/Forums/en-US/vistamedia/threads where people who specialize in audio issues will be more than happy to help you with your problem.

    I hope this helps.

    Good luck! Lorien - a - MCSE/MCSA/network + / A +.

  • Will not allow the transfer of files without authorization. How do I get permission?

    2 laptops to home network.   Windows 7.    1 x 64-bit, 1 x 32-bit.

    I have set up accounts on both computers at home as an administrator.
    I just want to transfer files / photos between them.

    My account on both (admin) will not allow the transfer of files without authorization.
    How can I get permission? I have set up on the two passwords I tried to use, but not joy.
    I missed something obvious?  I thought that I could just drag and drop!
    HELP please.

    Ownership of a file or a folder,

    Right click on the file/folder, select properties and then click the Security tab.

    Click Advanced, and then click the owner tab.

    Click on edit and then do one of the following:

    To change the owner to a user or group that is not listed, click other users and groups and enter the object name to select (examples), type the name of the user or group and then click OK.

    To change the owner to a user or a group is listed in the change owner to box, click the new owner.

    To change the owner of all subcontainers and objects in the tree view, select the Replace owner of subcontainers and objects of the box.

    See also why I can't delete a file or folder?

    How to open a file if I get an access denied message?

    http://Windows.Microsoft.com/en-us/Windows7/how-do-I-open-a-file-if-I-get-an-access-denied-message

    What to know before applying permissions to a file or folder

    http://Windows.Microsoft.com/en-us/Windows7/what-to-know-before-applying-permissions-to-a-file-or-folder

  • How to match the 2 points for follow-up?

    Hello

    How can I match points followed by two different objects. I would like to correspond to the movements.

    (Basically, I have 2 slow travel shots along a window, each with different lighting. I would like to match the two windows...)

    Thanks in advance,
    René

    That's how I would try to pull this: basically stabilize you the motion, adjust the window handles and layers to exactly match A shooting more than hit B by manually adjusting for the property position and time-remapping keyframes, then re - introduce the request

    SHOOTING A - the hidden underexposed

    B - the overexposed shot

    1. place the shot b. shooting above cut only the time and place as accurately as possible

    2. stabilize the movement at A glance and apply to the layer

    3. stabilize the motion Shot b and apply to the layer

    4 use the difference mode to place exactly layers one over the other.

    Now you have a model with the two shot of stabilized and the window is exactly in the same place.

    5. create a solid capture A above and set it as a cache alpha - mask for your window.

    6. for turned a set a keyframe for the position and the effect of time remapping in the boot image. Make sure that the window is exactly in the same position, and layer handles are exactly on top of the other.

    7. go to the end of the shooting and align the window again and set a keyframe for TR a Position

    8. carefully examine the shooting through and make images more if necessary keys. the little the better.

    in the end, it should look something like this:

    9 re - introduce the request by attaching the two shots to a null value with the data of monitoring of plan B (you already have the tracking data, simply change the type of track to transform and apply it to a null)

    you could probably get a way without stages 6 to 8, if there wasn't any change of parallax.

  • under certain conditions allow the update of an item in 10g

    Hi all, I'm a total newbie to Oracle forms and I need to develop a base of to display the data in a table.

    The logic that is needed is to allow the update one field and that too that it has one of two possible values.

    For example, consider the following two documents:

    Record 1:

    Name: Naren

    Status: NEW REQUEST

    Sheet 2:

    Name: Ravi

    Status: REQUEST for CONVERSION


    Only the status of the file 2 column can be updated on the "PROCESSING REQUEST' to 'NEW APPLICATION'.

    I create a list box to the Status column with values of TREATMENT of DEMAND and the NEW REQUEST.

    But that allows me to update the status of 'PROCESSING REQUEST' to 'NEW APPLICATION' and 'NEW APPLICATION' to "SEEK treatment".

    I want to enable the update of status only when its value = "PROCESSING REQUEST"

    Can someone help me please? Maybe that trigger to use.

    Thank you.

    Your code is wrong.

    IF: UP_TEM_PAYCARD_REQUESTS. STATUS <> 'TREATMENT of the REQUEST' THEN

    SET_ITEM_INSTANCE_PROPERTY('UP_TEM_PAYCARD_REQUESTS.) STATUS, UPDATE_ALLOWED, PROPERTY_FALSE);

    END IF;

    SET_ITEM_INSTANCE_PROPERTY accepts FOUR arguments (take a look at the online help.

    Plan to retry the EXCHANGE WHEN LIST and POST-QUERY-approach with the correct code.

Maybe you are looking for