Need a driver for Canon Selphy CP400 with Windows 7

Similar Questions

• Cannot install driver for Canon selphy cp720 on Windows 8

  Cannot install the driver on windows 8

  I was indeed able to correctly install the driver Windows 7 on Windows 8.1 (x 64). I downloaded the V4.0 - German pilot (since it's my native language) page of Canon and used Compatibility Settings (Windows 7 + admin) Support and the executable installed the driver without worries. After the Installation of the printer showed normally and I am able to print photos using Version 8.1 Windows of the guns 'ImageBrowser Ex' (which I installed in front, requiring "Run as Administrator" too, otherwise indicating a failure during install).

• have windows 8, need printer driver for Canon mp 160

  I have windows 8 (64), I need printer driver for Canon pixma mp160 printer. Unable to find one, any suggestions?

  I can't find a specific driver for 64-bit Windows 8. There is a 64-bit Vista/Windows 7 driver. Try this.

  http://www.USA.Canon.com/Cusa/support/consumer/printers_multifunction/pixma_mp_series/pixma_mp160#DriversAndSoftware

  Install according to the instructions. Do not connect the printer to the computer until you are instructed to do so.

  Tom Ferguson

• I need a driver for my Deskjet 1220C on Windows 7 64 bit

  I need a driver for my Deskjet 1220C on Windows 7 64 bit

  Install the driver with Windows update with usb to printer connection.

  There is no downloadable driver available on the portal to suport HP for your printer. Available only for Windows 7 x 64 driver is provided by Microsoft.

• Creative Webcam Live! USB webcam, I need a driver for my webcam works in Windows 7, it is creative VF0050

  I need a drive for my webcam work in windows 7. It is a live webcam. VF0050

  From this link http://support.creative.com/Downloads/searchdownloads.aspx?strString=VF0050&ShowDetails=1
  It looks like not there is no driver for Windows 7.

• I need a driver for my 1280 Deskjet on Windows 7 64 bit

  I always have a problem to find a driver for my printer Im HP Deskjet 1280 with Windows 7 64 bit operating system. Can someone help please.

  I need it for my new computer HP Pavilion P6-2021UK.

  Stem

  What version of Windows 7 do you have?  (Open a DOS window and type WORM.)

  Try the following: start, devices and printers, adding a printer, add a local printer, LPT1: (just as a placeholder), then, and then click Windows Update.  Your computer must be connected to the internet.  It may take a few minutes for the current list, once it is click on the HP manufacturer (not HP) and scroll down beyond the Designjet 800PS printer Deskjet 1220C.

  If for some reason you can't get the driver via Windows Update is also available on the Windows Catalog Site but this site is a little awkward to use.  The HP 1220C driver can be downloaded from the Site catalog Microsoft Update here.  You should not use IE, this site does not support other browsers.  The x 64 version of the driver is the one who is 11.6 Mb, the smaller is the x 86 driver and the largest is for the rare IA-64 architecture.  In this case, you save the file downloaded from the Microsoft website, and then extract the files into a working directory.  When you add the printer select the option "have disk" and point to the file where the driver was previously extracted.

  

• USB 3.0 driver for Pavilion 20-a210d with Windows 7

  We just bought a HP Pavilion 20-a210d All in one desktop pc, with windows 7 installation usb 3.0 not detected. Please help to get the drivers for my new desktop pc. Thank you.

  Hello

  Please use the following driver:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?cc=us&LC=en&softwareitem=CP-108667-1

  Kind regards.

• 'check' drive for consistency at startup with Windows 7

  Hello

  Since upgrading from Windows Vista to Windows 7, my computer has been running a process to "verify the drive for consistency" before the login screen. Sometimes I can get out by pressing a key, but often the program is not responding. So far no problems have been revealed through the disk check.

  How can I disable the process?

  Thank you

  Check here and see if one of the two fixed works for you.  I would try the premiera first, because it does not involve the registry and seems simple enough.

  Thank you

  v M.V.P. - desktop experience | M.C.S.A. | M.C.P. - MS Server 2 k 3, Network Architecture

• printer driver for canon lbp 1260 with USB-parallel connection (W7 Home premium 64 b)

  Default W7 to IEEE-1284 controller installation when LBP1260 is connected in parallel - usb (no available on computer parallel port) cable.
  Properties of the IEEE-1284 controller: functions of the device: USB printing support
  device type: bus controller USB (Microsoft, 21/06/2006, 6.1.7600.16385) "best device driver software".
  Impossible for the downloaded installed printer driver or transfer to computer XP driver.

  The HP Laserjet 4 printer driver installation (or 4 +).   Canon engine has been used in LJ4 series and the pilot pushes the LBP1260 perfectly and has since Windows 98 :) sure to allocate the (virtual) USB port to the printer, if you don't when you installed the driver.

• How to use a flash drive for HP Pavilion p6331 with Windows Vista for backup worki?

  Hello

  While I have a master's degree, my know-how is written the text, does not not with the computer functions that are new to me.  Whenever I try to my backup job, the default setting of my Media Smart desktop assumes that my files will be sent to some separate, newly purchased drive, drive E.  However, I don't have any drive E!  I bought some DVDs but they keep rejected and cannot be written above.  Seems cheaper solution was to buy a flash drive.  I tried to save, but the menu showed that drive new E or "insert DVD."  What I need to know where/how is insert (front of the back of the Tower?) flash player and the "selection" of this option.  Do I need to buy a special cable to connect this small Lexar Flash drive, 16 GB?

  Thanks for all the words of wisdom.

  Hello leathergirl. I checked the model number on the HP website and did not find a system with this model you listed.

  You can see the card reader in the E: drive when you try to back up your data.

  You should be able to navigate to any location (by car) which is able to accept data during backups. I don't recommend that you use the backup but just Windows copy and paste all data, such as documents, pictures, music, etc..

  Unless you use DVD +/-RW disc, the DVD disc can have that data written (burned) to them once. DVD +/-RW can be rewritten several times before becoming defective.

  The Lexar 16 GB Flash drive USB should be inserted into the USB port on the front and then recognized by the operating system and drivers must be installed by the operating system.

  You should be able to copy and paste your data to the Lexar FlashDrive using Windows Explorer. Lexar Flash drive must be placed in the list of drives on the left side of the screen when using Windows Explorer.

• Quick adjustment driver for a Latitude D630 with Windows 7 32 bit

  I loaded Windows 7 Home Premium 32 bit on a Dell Latitude D630.  Is there a compatible with the D630 AND Windows 7 Home 32 bit Dell QuickSet driver?

  I tried to use the serial number, [ADMIN NOTE: Service tag deleted by the privacy policy], in order to obtain the correct driver from the quick set button, but the pilot was offered, R182249, would not load.  The Dell site also does not list Windows 7 in the drop down menu to the operating system.  R182249 is listed as pilot QuickSet for Vista 32 or 64 bit.

  Any suggestions?

  Thank you.

  R182249 is for Vista 64 bit only; It will not work on 32 bit OS.

  R180762 should load on Windows 7 32 bit, it worked fine for me on a D820.

  To be more specific try unofficial driver all I listed here:

  http://en.community.Dell.com/support-forums/software-OS/w/microsoft_os/4599.Latitude-D630-Windows-7-32-bit.aspx

• need a driver for ATI Radeon HD4200 in window 8

  After the execution of windows 8, I now get an error message that my graphic needs an update of the driver.

  Hi Jomoprs,

  Thanks for the reply.
   
  We are happy to know that your problem has been resolved.
   
  Please do not hesitate to write us if you have any other related issue of Windows.

• driver for lexmark x 75 with windows 8

  How to find drivers for a Lexmark X 75 all in a system of Windows 8

  The last driver that I could find for the Lexmark X 75 is for Windows XP 32-bit. It is available through Lexmark websites, support section. Alas, this is not likely to work with 32-bit Windows 8 and will not work with 64-bit Windows 8.

  I'm sorry.

  Tom Ferguson

• Driver for HP LaserJet 3050 with Windows XP Professional 64-bit

  Does anyone know what driver I can use to install the HP Laserjet 3050 which is located on a network? I have Windows 64 HP.

  It is a known and very easy problem for you to solve.  On the computer to which the printer is connected, go to the properties of the computer and note the name of the computer.  Now, go to the printer properties and note the name of the shared printer sharing.  Now on the xp machine go to printers and faxes and click on add printer, then local printer, next and click on create a new port and in the dropdown choose the port and in the box that appears, type the name of the local computer and share the name of the computer to which the printer is connected using the following syntax : \\computername\sharename where you replace your real names.  Click ok and then next and when you get to the page of decision-makers choose hp on the left, then choose any listed laserjet pcl5 driver (Laserjet 2200 works fine) and then following and you can rename it to LJ3050 and end up and you should be able to print now from the xp computer.  To get the computer name of the machine windows 7, right click on computer and scroll down to properties and left-click.  As for the share name go to devices and printers and right click on the icon of 3050 and scroll the properties first and left click and then click on share and the share name will be there.

• I need a driver for Compaq Presario A945US on Windows XP

  My PC laptop laptop Compaq Prsario A945US was built as a

  Vista computer, but I chose to have XP. He was never good. I was told that the reason is they have installed a Vista driver and it does not work with XP. How can I find the correct xp driver. The audio device says it is bus audio conexant audio device onhigh definition. It has a yellow question mark next to him, saying: it does not work. I think good xp driver would do his job, but I don't know how to find.

  E-mail address is removed from the privacy *.

  First, download and run:

  http://support.Microsoft.com/mats/AudioPlayback/

  It can detect and solve your problem, but if not, try to contact Compaq support:

  http://www.Compaq.com/country/cpq_support.html