Similar Questions

• New blackBerry for BlackBerry smartphones need a little advice on Wi - Fi

  Hi all

  I recently bought my first Smartphone BlackBerry, a Bold 9700 and so far really enjoy.

  I however, have some teething problems with Wi - Fi that I hope you could help me on.

  I have an active data BB Plan (I think that's what it's called) that allows BBM, internet E-mail etc.

  I noticed that my wifi connection during the day is a case of "hit & miss". The night, no problems, solid connection.

  The Orange Signal is very poor here where I live, so I looked forward to the use of the WiFi for UMA, Web mail, etc.

  I was wondering if it is my router (Netgear RangeMax WNR1000), its parameters, the 9700 or my mobile operator (Orange UK)?

  I've updated my 9700 to 5.0.0.86 device software 2 (Platform 5.1.0.175)

  125 MB of space free application memory

  My current router encryption is WPA and using the Legacy Mode (band G I think) at 54 Mbps.

  Can anyone shed light on my intermittent WiFi during the day?

  Thank you very much

  Madaxan

  UPDATE *.

  Well, after scouring the internet and trying to get help from Netgear, my WiFi was still not usable through my Netgear WNR1000 and intermittent.

  Enough was enough. Am in my car and drove to my nearest PC store. I bought a really cheap

  Linksys WRT120N Home router (£30).

  Got home, installed with the default configuration settings. Piece of cake.

  Turned on the BB 9700 wifi... UMA logo and Wi - Fi appeared instantly and securely from the last 24 hours.

  I got 100% UMA BlackBerry Internet signal and Wifi...!

   

  Needless to say, I am now very happy that I can use this phone for its main purpose. The call of my home region that is not a 3 G/GPRS signal.

  So for someone who suffers from the lack of WiFi, UMA or intermittent WiFi signal, I invite you to go and replace your router. I'm so happy I did.

  With so many people have reported problems of WiFi connection, I hope that we can build a list of compatible routers that work with our dear BB.

  Now, I am fully aware that some people say that Wi - Fi standards are the same, 802.11b/g/n, etc., but let me tell you that, on PAPER, they are SAME, how manufacturers interpret this standard and to implement in their products is a whole different kettle of fish.

  Linksys, thank you.

  I hope this helps...

  Madaxan

• Make a simple class, I need a little advice

  I have a simple scroll bar class, but it does not work. Anyone can point out what I'm doing wrong?
  I have a movieclip with movieclip instances track_mc and drag_mc to the breast. I create my new class and pass the name of the host element.
  In the constructor I can trace the correct clips and drag_mc gets his onRelease function.
  When I click it the startDrag() does not work and the drag() works traces undefined for drag_mc, why is this, what I'm missing here?

  > he drag() traces undefined function
  Problem with simple range. Inside of the callback functions, the members of the class are out of reach. To resolve, use the import statement:
  Import mx.utils.Delegate;

  and then use:
  drag_mc.onPress = Delegate.create (this, drag);

  Without the import statement:
  drag_mc.onPress = mx.utils.Delegate.create (this, drag);

• A brand new user has need of little help and advice...

  Hello

  I just took the bold gamble in Indesign and it's the first day of my 30 day trial.

  I need help and advice from you folks... Please.

  I have been successfully creating Brochures A5 (A4 folded) using MS Word and print it on a desktop printer. MS Word sorted my order page for me when printing to the correct pages have been implemented.

  I read as much information that I could find, but I'm still able to do the same in Indesign.

  I'm looking forward to you use the advanced functions of layout and have control over what I do, but I need to work on this fundamental step before going any further.

  I hope that what I explained is logical.

  Concerning

  John

  So presumably you create a new document, the portrait of the A5, facing pages. Make sure that your number of pages in the document is a multiple of 4.

  Create, type, twist, meditate, edit, smile, save.

  To create your booklet using InDesign, on the file menu, select print booklet.

  You will probably need to jump back from the button print settings, adjusting the size paper, Orientation, color, and in the print tab booklet for 2-high shot on horseback.

  A large part has been posted on this topic, these are the basics, printing booklet is not the best module ever written Adobe, IMO

• You can save a. CPTX (project) as one. CPTL (model) and convert later than for one. File CPTX? I just need a little clarification on this operation in Adobe Captivate 8.

  You can save a. CPTX (project) as one. CPTL (model) and convert later than for one. File CPTX? I just need a little clarification on this operation in Adobe Captivate 8. Thanks in advance!

  Sorry, but I neglected to include a bit small (but essential) information on this thing cptl.

  A file cptl is a model of Captivate. When you create one and create a new project based on a template, you point to the .cptl file. And at this time, no matter what the .cptl file has inside of it at this time is copied to a new project file. From there, you simply save the project and .cptx is assumed. The CPTL will already have the draft resolution together and many other things. The beauty is that once it is all set up correctly, it allows you to create faster training because you don't have to stop and consider things like the resolution of project, which should show the first slide, which should show the last slide, but also a host of other possibilities.

  The reactive substance, you need to ask one of the new kids on the block who is struck with it. I'm old school and have yet to fully embrace it. It's new and full of contradictions. And I really struggled with how many people ask to see training which normally runs on a large monitor displayed on their tiny phone screens where text messages are often barely legible.

  See you soon... Rick

• Need a little help. Script to export the single document for different types of files.

  Hey guys, I'm new to scripting. have looked everywhere but cannot find an answer to this, I'm sure it's pretty simple

  
  At work we export logos all the time in a few different formats for the clients.
  I looked in the script as a way to automate the process.

  So far, I thought a little script to export my Illustrator formats document... now I need to be able to export this document even outside as a res low and high PNG, low and high res JPEG, EPS, PDF and TIFF etc.
  I have scripts to do all these separately but just need to know how to put it all in a single script I can do all at once

  Here is an example of my two different scripts to export PNG. I just need to know how string together so I can add all of the formats without breaking it.

  	function savePNG() {}
  	var destFolder = Folder.selectDialog ("select the folder to export the PNG files to :');")
  	If {(destFolder)
  	If (app.documents.length > 0) {}
  	var Nomdoc = app.activeDocument.name.match(/^.*[^.ai]/i);
  	var destFile = new file (destFolder + ' /' + Nomdoc + "-HR.png");
  	if(destFile == null) {return ;}
  	var doc = app.activeDocument;
  	var artRect = doc.artboards [0] .artboardRect;
  	var exportOptions = new ImageCaptureOptions;
  	exportOptions.resolution = 300;
  	exportOptions.antiAliasing = true;
  	exportOptions.transparency = true;
  	doc.imageCapture (destFile, artRect, exportOptions);
  	}
  	}
  	}
  	savePNG();

  and here is the version low resolution

  	function savePNG() {}
  	var destFolder = Folder.selectDialog ("select the folder to export the PNG files to :');")
  	If {(destFolder)
  	If (app.documents.length > 0) {}
  	var Nomdoc = app.activeDocument.name.match(/^.*[^.ai]/i);
  	var destFile = new file (destFolder + ' /' + Nomdoc + "-LR.png");
  	if(destFile == null) {return ;}
  	var doc = app.activeDocument;
  	var artRect = doc.artboards [0] .artboardRect;
  	var exportOptions = new ImageCaptureOptions;
  	exportOptions.resolution = 72;
  	exportOptions.antiAliasing = true;
  	exportOptions.transparency = true;
  	doc.imageCapture (destFile, artRect, exportOptions);
  	}
  	}
  	}
  	savePNG();

  Thanks for any advice you can give!
  Eli

  Oh, you want to perform two functions, one after another at the same time? then just name with different names and perform one function after another, if all files will be saved in the same folder, the argument selectDialog move method on each of your functions to don't do only once.

  function savePNG_HR(){
      var destFolder = Folder.selectDialog('Select the folder to export the PNG files to:');
      if (destFolder) {
          if(app.documents.length > 0){
              var docName = app.activeDocument.name.match(/^.*[^.ai]/i);
              var destFile = new File(destFolder + '/' + docName + " - HR.png");
              if(destFile == null){return;}
              var doc = app.activeDocument;
              var artRect = doc.artboards[0].artboardRect;
              var exportOptions = new ImageCaptureOptions;
              exportOptions.resolution = 300;
              exportOptions.antiAliasing = true;
              exportOptions.transparency = true;
              doc.imageCapture(destFile, artRect, exportOptions);
          }
      }
  }
  
  function savePNG_LR(){
      var destFolder = Folder.selectDialog('Select the folder to export the PNG files to:');
      if (destFolder) {
          if(app.documents.length > 0){
              var docName = app.activeDocument.name.match(/^.*[^.ai]/i);
              var destFile = new File(destFolder + '/' + docName + " - LR.png");
              if(destFile == null){return;}
              var doc = app.activeDocument;
              var artRect = doc.artboards[0].artboardRect;
              var exportOptions = new ImageCaptureOptions;
              exportOptions.resolution = 72;
              exportOptions.antiAliasing = true;
              exportOptions.transparency = true;
              doc.imageCapture(destFile, artRect, exportOptions);
          }
      }
  }
  savePNG_HR();
  savePNG_LR();
  

• New without the need of help/advice

  Hello everyone

  I am new to use without. We are a small company and our budget COMPUTER is almost nonexisant. I bought a PS500XV from a seller on Ebay with the intention to integrate in one of our servers in VMware ESXi 5.1. In it, I received a box with cables of power, a RS-232 cable and rails... NO software, NO manual, NOTHING not to mention when I sent the seller (which resembles a TON of Dell sale without) was quite short and said that they did not provide a service to the customer... all, I asked to was a little direction...

  So I'm here now looking for advice. There seems to be precious little on the page of Dell support for the product. It seems that when these aircraft are delivered, they understand the management / configuration software and I guess some sort of manual... I have NOTHING.

  Please is - anyone can help me and at least point me in the right direction. I carried on a keyboard, searching the Internet looking for info... nothing helps.

  Thanks in advance or a person everyone's help!

  Phil

  Hello

  You don't require any special software to manage the table, other than a browser.

  Unfortunately, you don't have a contract support, or guarantee, so you can't get a support account.  Allows you access to the documents, and related software.   The license to use the firmware comes with the contract warranty or support, not in the HW himself.

  All models of table work the same in regards to installation and operation.  Different controllers of discs, number of network adapters, cache will be different, but the software will not.

  It may still be possible to get the order table so that you can put under contract.  However, the 5000 series will end of life August 2014.  No support will be possible after that.  Some vendors sell these paintings with spare disks that would prevent you to get a support contract.

  Basic configuration.  The easiest option is to connect to the serial port, 9600, n, 8, 1 No. Flowcontrol. (Not HW and SW, AKA Xon/Xoff

  Press enter, you should get a login: prompt.   Enter with password grpadmin grpadmin.

  It should prompt allows you to configure the array.  You must select what interface.  (ETH0 is by default), then a record IP address for the port.  Then you enter a member name, which is unique to each Member of a group.  Then you enter a GroupName.  Whether the Group would be EQL - SAN, the name of the Member could be EQL-SAN-member1.  Then, you provide a group IP address (that corresponds to the address management and discovery).   You get so prompt to create the group.

  You will then get prompted for a password and an administrator password.

  Once created, you'll be a GrpName > prompt.

  You can now use the Web GUI, make sure you have Java installed, and point the browser to the IP address of the group.

  It manuals are online also.  I.e. psonlinehelp.equallogic.com/.../configuring_an_array_and_creating_a_group.htm

  There are also many other useful links, which you can find through a search engine.

  www.confignotes.com/.../Dell-EqualLogic-CLI-configuration

  Once you get logged in, you will be able to configure the RAIDset.   Suggest to not use RAID5.  He is more vulnerable.  RAID6 might be the best solution.  So be sure to select the name of the Member-> Network tab and configure the other network ports.

  Finally, make sure that you both modules control cable.

  Kind regards

• In big trouble and the refectory. Really need help and advice.

  Hi everyone, I'll try to be brief and make me delete the cause that there was a strange turn of events for me. A good friend of mine sold me his laptop: Acer Aspire 7560 G. Good enough for me to was for very occasional use. The laptop has dual boot: Windows 7 Family edition provided with the computer and Mint Lixux for which my friend created partitions. Last week, I decided to make the leap to Windows 10 via the free upragde. The process went well until the end when I was informed that there was not enough space on the partition of Windows 7 to complete the installation. So I went to my friend, so he could adjust the partitions in a more balanced way. He said that he could do. Of course, he is the one who partitioned the disk in the first place to the account of his love for Linux. I decided that I couldn't live without Linux in order to have a larger partition for Windows 7. My friend wiped the partition Linux and Windows 7, leaving for me recovery mode partition to reinstall the operating system, after that the other had been moved a little. In fact, he can never enter into Recovery Mode. Hours spent, and he did not want the best solution he found was to install a rather well preserved box of Windows 8 a friend of his who was given with a computer. Installation of Windows 8 is going very well, we had the key and everything. I'm not a Windows Guy. I'm a Mac guy my knowledge is limited, but I want to learn. Sometimes the Apple you know. The OS installed, but asked something like formalizing Windows on my computer. Now, I reinstalled Linux and I do not see the Windows 7 recovery mode. Is that mean I lost my chance to spend freely for good? This Windows 8 is not even mine, he's a friend of my friend. I'm really upset and I think someone has caused me major problems. Can anyone help please?

  Nice S.

  You have the product key of Windows 7 or Windows 8? If so, simply download Windows 10 then perform a new installation:

  How to download official Windows 10 ISO files

  then

  How to: perform a clean installation of Windows 10

  then

  How to: install and update drivers in Windows 10

  After the upgrade to Windows 10, you cannot use your Windows 7 or Windows 8/8.1 product key.

  Click on this Later.

  

  Check if you have installed November update:

  How to check if you downloaded or installed the update Windows 10 November

  If you do, then all you need to do is change the using your Windows 7 product key or product key 8:

  Click Start > settings > Update & security > Activation > change product key and then enter the new product key, and then click Next to activate

  

  If you continue to experience problems, contact support:

  Activate your Windows 10 license with Microsoft Chat support

• Little advice please?

  Hello world

  First post please bare with me.

  We have a little cumulative with default printers, the machine seems to remember installing a printer, but not the value by default once you re connection, it is by default to Microsoft XPS Writer.

  Someone at - it an adivce? It is running XP Pro windows environment.

  Thank you!

  If I underfstand that you hav posetd {(pas vraiment sûr si notre prise sur le guset ou hos) your VM WS is running on an XP host.}  I do not know what host operating system you guys use (it looks like a variant of Windows).

  Check if your printer on the host computer is not XPS. This is the default value for a new installation of Windows guests. If this is you must install another printer on the host and which are lacking.  For example if I install VMware 8.01 on Windows 2008 server host, I need instatll one HO old Laserjet 5 MP veru as default printer on the host computer.  Whenever I have install any OS, window or Linux as a guest VMwaer picks up the prrinter default host each works without fail and ask you if you want to use on the client (then unavalable to the host or other guests).

  Marty

• I have the all-new Apple TV 64 GB & I need a little assistance with it?

  OK, I have the all-new Apple TV 64 GB 1080i & how can you update App?

  As I have a game application that needs to be updated it is called asphalt 8 * is a car racing game *.

  & in the application it tells me that there is an update available, so how can I do to update?

  Read here: on the App Store on your Apple TV (4th generation) - Apple Support

• Need a little help to understand the features of measure or-scope

  
  

  Hi taurna,

  The Stats.vi measure will take a measure through the complete waveform acquired in that particular record.  Help on the Fetch Multi steps Stats.vi:

  The waveform on the digitizer calculates waveform measurement is to
  an acquisition that you launched previously.

  But according to the measure of the positive width, you see only the first pulse width.  The definition of the measure can be found below (note the use of 'first two mi'):

  Positive width

  
  

  C/C++ equivalent: NISCOPE_VAL_WIDTH_POS

  The time difference in seconds between the first two mid reference
  crossings, where the slopes are positive and negative respectively. A
  Digital hysteresis is used to find the points.

  Help on the num in the statistics section:

  Num in stats returns the
  number of measurements to calculate the statistics.

  Saying "1" here, he did a single measure on your single purchase you took, since the while loop was taken out of your code.  If you want several measures to make, you need several acquisitions.

• HP Compaq dx6120 MT: I need a little help

  Hi I have an old computer

  I made a few changes to the device, so I did installed 2 GB RAM and 1 GB of graphics (Nvidia) and I want to upgrade the operating system from Windows Vista to Windows 7

  The device carry Windows 7 32-bit or 64-bit?

  or I have to buy a new

  It may be able to manage the OS of Windows 7 32 bit, not sure about 64-bit.  If you get it installed, drivers can be a problem and the Winaero of Win 7 function will be unavailable.

  You would be well advised to run the Windows 7 Upgrade Advisor to see if it can be upgraded or what needed to be addressed.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=20

  Looking to the strict minimum specs here, so don't expect not to many and the age of the system maybe you money would be better spent elsewhere.

  Keep this for reference and should you be able to install Win 7, you need to install the chipset drivers:

  gr = Y & DwnldID = 20019 http://Downloadcenter.Intel.com/Detail_Desc.aspx?a & lang = eng & OSVersion = Windows 207%...

• Need help and advice of HP PAVILION DV6-6141 pilot!

  Hello

  Just got a HP PAVILION DV6-6141

  basic specifications:

  Win7 64 bit

  Intel Core i7 2630QM 2 GHz

  8 GB of DDR3 memory

  6770 m 2 GB

  And I was wondering so people could help me with a driver update advice for her, because I don't want the laptop from top and die on me if I make mistakes!

  1.)

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=5154596&...

  Is this the right page to receive my drivers of for the HP PAVILION DV6-6141?

  If not could someone help direct me to the right page?

  2.)

  At startup, the bios indicates version: F.17, but I was wondering what the latest compatible version for my laptop?

  (I am double checking so I saw nothing!)

  3.)

  I recently tried to update all the drivers 6770 m ATI on this page that I linked above (could have been a mistake), everything works except for some bugs with the textures and games seems to crash on a regular basis

  4.)

  Is there any other kind of drivers that are compatible with the 6770 m to improve the performance of game and maybe stop the crashes/bugs, I saw people talking about modded drivers on this laptop, but I don't know where to start!

  Also if you know any good guys messages-son to help with this (if they have already been made) would be great!

  Thank you

  Here is the correct driver for your model DV6-6141eo download link:

  http://h10025.www1.HP.com/ewfrf/WC/softwareCategory?CC=US&DLC=en&LC=en&os=4062&Product=5154595&sw_lang=&Tool= &

  F.1b is the latest version of the BIOS available for your model. Here is the download link:

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-100034-1&CC=US&DLC=en&LC=en&os=4062&Product=5154595&sw_lang=&Tool=

  Here is the link to the latest graphics driver for your system:

  http://ftp.HP.com/pub/SoftPaq/sp55001-55500/sp55092.exe

  If you have already installed the latest graphics mentioned above, you can try the following driver:

  http://ftp.HP.com/pub/SoftPaq/sp54001-54500/sp54462.exe

• New/updated nine HP Desktop Win 7 Pro - need help or advice

  Hello...

  Honestly, I do this for a dear friend and I would like to keep it this way!  Its xp fell under the "ms tech phone call" scam, and while I don't know if it'll never work, once again, she bought the following:

  HP Compaq 6000 Pro Small Form Factor (tour info)

  System - Dell: Intel Core 2Duo E7500 2.93: 4gm memory ram: 64-bit (info via prop comp)

  This is a refurbished pc.  I activate with the product key provided.  Set a restore point; installed hp photosmart more printer via the cd and google Canary worm 52.0.2715.0; There is a Mediatek RT2870 LAN card 12/04/16 1.5.38.101 WiFi adapter

  Windows Defender > used 3 hours "search for updates" after I downloaded from ms site, definitions, I think. From my own experience some years back I remember (with great pain) this problem.

  Wanting a good place to start "solid":

  • uninstalled MS security essentials
  • windows update is the KB976902 11/20/2010
  • directly ran here!

  My Question: What do I do then?  Download all updates for win 7, I guess and then Defender.  I'm sure she'll switch to windows 10 to 99%, so I should make a bee line it?  Given that I'll be 'teaching' his 10 windows and it comes from xp I thought it would be easier to dip in the first 7...

  My excuse for the length, it's my first post to the community after years of reading others.   Instead of recent viruses, including my edge get hi-jacked little time after my upgrade to win 10, I want to continue with the installation in the "right direction."

  Thank you very much!

  Hi Emma,

  Thanks for posting your query on the Microsoft Community.

  According to the description, it seems that you have properly installed Windows 7 on your computer, but facing problem in the installation of updates. Correct me if I'm wrong. This problem may occur if one or more of the following conditions are met:

  1. The Windows Update database is damaged.
  2. Antivirus software is configured to scan the folder % Windir%\SoftwareDistribution.
  3. Service (BITS) Background Intelligent Transfer Service does not receive a content link header.
  4. A required system file is incorrectly registered.

  If it helps, try the methods and check them off below.

  Method 1

  If I'm wrong, you tried not Troubleshooting Windows Update below to solve your problem and if this isn't the same link, then try to run the troubleshooter.

  Open the Windows Update troubleshooting tool

  http://Windows.Microsoft.com/en-in/Windows7/open-the-Windows-Update-Troubleshooter

  Method 2

  Step 1

  If the problem persists I suggest to reset the Windows Update components and for this, try to run the fixit described in the following article. If you already tried the fixit even before that I ask of you rerun the fixit.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058/en-us#LetMeFixItMyselfAlways

  Step 2

  Try to follow the steps in the Microsoft Article and check if it helps.

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows/troubleshoot-problems-installing-updates#1TC=Windows-7

  I hope this helps. If the problem still persists, post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Kind regards

• New curve blackBerry Smartphones user 9320, I need a little help

  9320 curve is my first Smartphone after an old style phone. I managed to understand the basics, texts, Internet access, etc. I need a bit of help with the rest, for example, I tried to download a free app, but get the error message 40721 - without put credentials cached.

  (A) what do I have to register my details somewhere to download (even free) applications, where and how?

  (B) I don't have a Blackberry ID, or more precisely do not know what is it.  How is it useful?

  Here are my most immediate questions, and I would appreciate a few basic instructions, where and how to...

  Thank you very much

  Hi Woundenberg

  I thing your carrier have not activated BlackBerry data Plan aka BIS on your account. BIS is different from a data plan normal, a normal data plan you will navigate on the internet but will not give access to the BlackBerry application. So I prefer to give you a call to T-Mobile for re - confirm whether or not they had allocated BIS on your account.

  When BlackBerry data plans are enabled on your device, and then click Manage connections > Service status > = BlackBerry Internet Service it will be " Mobile network ".

  Then call T - Mobile and let us know about your updates.