need a phone apple Apple Watch use?

Similar Questions

• Unable to receive calls from Apple Watch, using WIFI AT & T calls, when the iPhone is turned on, turned off or in Airplane Mode.

  I work on this issue and wanted to involve the community.

  I have tests the functionality Apple Watch and have been unable to solve my problems with WIFI call. I use the AT & T and I am connect to the strip of the 5 GHz on my router Xfinity.

  I am able to make/receive calls from my iPad and Mac laptop when iPhone is off / Mode plane; However, this feature does not work on the watch. I can make and receive calls from the watch when the phone is turned on.

  Another problem is that I am not able to send and receive messages (blue or green bubble) of the watch - once again when the phone is turned off or in flight Mode

  I'll copy in 2 portions of the Web site: http://help.apple.com/watch/

  http://help.Apple.com/watch/#/apd0443fb403

  If your Apple Watch is in range of a Wi - Fi network that the iPhone is connected to before, you can always do the following (even if the iPhone is off):

  • Send and receive digital messages Touch
  • Send and receive messages using Messages
  • Make and receive phone calls (if you have active calls, Wi - Fi, and you are within range of a Wi - Fi connected to your iPhone before)
  • Check current weather conditions
  • Track your inventory

  http://help.Apple.com/watch/#/apd2fe746e86

  Make calls via Wi - Fi

  If your cellular operator offers Wi - Fi calls, you can use Apple Watch to make and receive calls over Wi - Fi instead of cellular network - even when your pair iPhone isn't with you or is disabled. Apple Watch comes to be in range of a Wi - Fi network that is connected to your iPhone in the past.

  To see if your carrier offers Wi - Fi calls, see the article Apple Support phone with Wi-Fi calls, then enable the calls on your iPhone and Apple Watch Wi - Fi.

  Note: You can make emergency calls via Wi - Fi, but when possible, use rather iPhone over a cellular connection - your location information will be more specific.

  Enable on iPhone Wi - Fi calls. On iPhone, go to settings > phone and turn on Wi - Fi calling and application to other devices.

  Enable calls on Apple Watch Wi - Fi. Open the Apple Watch app on iPhone, tap My Watch, tap phone, then turn on Wi - Fi calls. If you do not see the parameter, make sure that you have activated calls on iPhone Wi - Fi.

  Answer please if you are able to perform any of these functions! And any troubleshooting you can think!

  AspiringAppleGuru wrote:

  I have... to connect to the 5 GHz on my... router bandwidth.

  Hello

  These features are not available because Apple Watch cannot connect to a network of GHz Wi - Fi 5.

  If your watch is not connected to your iPhone via Bluetooth, but lying in a 2.4 GHz Wi - Fi network your iPhone plugged in before, the watch can connect to this network and you can continue to use certain features, including Wi - Fi calls (when it is supported by your operator, you already have in place).

  More information:

  On Bluetooth and Wi - Fi on Apple Watch - Apple Support

  Use Apple Watch without her sister iPhone - Apple Support

• My Apple Watch used to show me my contacts name

  When messages come my Apple Watch or call contact won name sucks.

  Hello

  On your iPhone, in the Contacts application, verify that there is a single contact for each person card and contains all their contact information (name, phone number, email traveled.

  It can then help to reset your sync data:

  • On your iPhone, in the application of the watch, go to: Watch My > general > reset > tap reset sync data.
  • Nothing seems to happen, but the process is running in the background / invisible to you, allow some time later it ends.

• Do you need to recalibrate Apple Watch after software update

  After the update to the latest version of the software my known distances do not record correctly. They are off by about 10%, which means that running/fast market records 5 miles 4.5 miles.  Not sure if that happened with all previous update.

  Hello

  No - it is not necessary.

  However, if you want to reset your calibration data and all start from scratch:

  • On your iPhone, in the application of the watch, go to: Watch My > privacy > Motion & Fitness > tap reset Calibration data.

  Then follow the instructions here to calibrate your watch again:

  • Calibrate your Apple Watch for better accuracy of training and activity - Apple Support

• Can I use Siri on my Apple Watch to post my weight to health app?

  I would like to be able to speak to Siri on my watch and have my weight posted in Apple's health on my iPhone application.

  Apparently, I managed once there is an entry that shows a watch as the source of the info, but it was a stroke of luck get that posted.

  Are there steps I must say or do to make this happen regularly?

  Hello

  That's what Siri can do on a Apple Watch > Use Siri on your Apple Watch - Apple Support

  "Apparently I managed once there is an entry that shows a watch as the source of the info, but it was a stroke of luck get that posted."

  Questionable Siri has done that.

• Apple Watch unlock Mac Setup Frustration

  I own a first generation of Apple Watch and an end 2013 13 "MacBook Pro and last mac mini (i5). I went through the entire setup process to have my watch unlock my MacBook several times. (All along the) When I get to choose the button "Allow your Apple Watch unlock your Mac", it runs for awhile and then I get the "unable to contact Apple Watch" fast. It seems to be my watch because if I try and let the Apple Watch locked, she'll tell me to unlock, and then try again. Happens on MacBook Pro and mac mini in the same way.

  I tried to research on this problem and we tried all authentication reset to two factors for an agreement again all settings and turn it on again.

  Any thoughts?

  Thank you!

  Hello pgirardi,

  I appreciate that you try to unlock your two computers using your Apple Watch with watch OS 3.  The resources below provide the steps and requirements to do this.  I would just try it with a single computer until you have a job before trying the second computer.

  Automatically unlock your Mac with your Apple Watch
  
  

  The first time you open a session after you turn on or restart your Mac, connect by entering your password manually. After that, Apple Watch connects to you.

  Set up automatic unlock

  Make sure your Apple Watch uses watch OS 3, and your Mac to mid-2013 or newer model uses macOS Sierra.
  For more information, see system requirements of continuity.

  Automatic unlocking

  Automatic unlock works with these devices and operating systems:

  watchOS 3	macOS Sierra
  Apple Watch (1st generation) Apple Watch series 1 Apple Watch series 2	MacBook (early 2015 or newer) MacBook Pro (late 2013 or newer) MacBook Air (mid-2013 or newer) Mac mini (late 2014 or newer) iMac (late 2013 or newer) Mac Pro (end of 2013 or later)

  Make sure your Apple ID to use instead of the two-step verification two factor authentication. Learn more.

  Make sure that your devices are configured as follows:

  • Your Mac has Bluetooth and Wi - Fi enabled.
  • Your Mac and Apple Watch are connected to iCloud with the same Apple ID.
    On your Mac, choose Apple () menu > System Preferences, and then click iCloud.
    On your iPhone, open the Apple Watch app, then go to general > Apple ID.
  • Your Apple Watch uses a password.
    On your iPhone, open the Apple Watch app, then type the access code.
  • Your Mac has "allow your Apple Watch unlock your Mac" selected in Security & Privacy preferences.
    Choose the Apple menu > System Preferences, click on Privacy & Security, then select the general tab.

    

  pgirardi, if you are unable to unlock your main computer after trying these steps, then you will need to cancel the match your iPhone and Apple Watch and try again.

  Cancel the match your iPhone and Apple Watch

  Take care.

• Auto unlock with Mac OS and Apple Watch

  I know that you need a Mac 2013 or later with Mac OS, a Apple Watch with watch OS 3 and two factor authentication (not two authentication step) to activate this feature, but for some reason, it does not appear in my system preferences.

  Any ideas?

  

  

  Greetings MetallicAsh,

  Thank you for using communities of Apple Support. It seems you want to unlock your Mac with your Apple Watch. Looks like you are already assured of a large number of parameters.
  I recommend reading this article, it explains what the parameters are still needed.
  
  

  Make sure that your devices are configured as follows:

  • Your Mac has Bluetooth and Wi - Fi enabled.
  • Your Mac and Apple Watch are connected to iCloud with the same Apple ID.
    On your Mac, choose Apple () menu > System Preferences, and then click iCloud.
    On your iPhone, open the Apple Watch app, then go to general > Apple ID.
  • Your Apple Watch uses a password.
    On your iPhone, open the Apple Watch app, then type the access code.
  • Your Mac has "allow your Apple Watch unlock your Mac" selected in Security & Privacy preferences.
    Choose the Apple menu > System Preferences, click on Privacy & Security, then select the general tab.

  Automatically unlock your Mac with your Apple Watch - Apple Support

  Take care.

• I have problem with my Apple Watch, during the step count of the market does not appear on the watch?

  I have a problem with my Apple Watch, when I use the watch on my treadmill, keep the phone, the number of step does not appear, the whole market is a waste if it shows only not on Apple Watch, how to solve this problem?

  Hi Shabbir

  Apple Watch has two integrated health and fitness apps: enforcement activity and the application of the workout. For best results, make sure your arms naturally swings while walking on the treadmill, as Apple Watch uses movement of arm (measured by the built-in accelerometer) to track and evaluate movement for indoor activities. If you use the application of the training session, your watch will also measure your heart rate continuously for training in order to estimate the calories burned.

  Check that you have configured the application of the activity:

  -Press the rings activity on your watch dial or open the application for the activity (if you have not set it upwards, you will be prompted to answer a few questions).

  Also, make sure that the fitness of tracking is enabled:

  -On your iPhone, in the application of Eve, go to: Watch My > privacy > Motion & Fitness > fitness monitoring.

  You can improve the accuracy of the estimates related to activity in calibrating Apple Watch (take your iPhone with you on walks outdoors or tracks, connected to your Apple Watch and with location enabled Services - see the detailed instructions in the article to support below).

  More information:

  http://www.Apple.com/watch/health-and-fitness/

  Use the activity on your Apple Watch - Apple Support

  Use of the workout on your Apple Watch - Apple Support

  Calibrate your Apple Watch for better accuracy of training and activity - Apple Support

• Wake up the screen on the Crown of the Apple Watch Series 2 is not displayed

  Watch app (iPhone 7 iOs 10) not the screen showing wake on the Crown of the Apple Watch Series 2 (look at OS 3)!

  What's wrong?

  Thank you

  Hello

  If you want to organize the presentation of the application on your Apple Watch using the app shows:

  • On your iPhone, in the application of the watch, go to: My Watch (tab) > presentation of the App.

• Can Apple Watch track a swim in an endless pool

  I work in an endless pool, which is actually a treadmill for swimmers. You will stay in one place and swim your heart while it blows a current against you to keep you in place in the small pool.

  I see that the watch can track laps, which is controlled by setting the distance of your pool so that he knows what is a length is, according to me. I also see that it can follow a free bath, and I guess it's GPS.

  No one knows if she can count the strokes? Or does anyone have an overview if you think it would work to track the swimming event in an endless pool where 1) don't stop and turn around each 'x' distance and 2) you also do not travel any distance to what a GPS is?

  Thanks in advance...

  N °

  Apple Watch uses GPS to track your progress in Open water swimming mode and titles towers during swimming in the pool swimming mode. The endless pool does not have to happen. As to count the strokes, I think it's (quite well know for that), but they do not report this information. Because they do not know to what extent you swim by race, they can use that to calculate your distance. However, I can see a future update where they have an Endless Pool mode when you enter the speed of the pool (assuming that you can set as a treadmill).

• Apple Watch - ring exercise not updated

  Hello. Just today, I had problems with my Apple Watch Sport (series 1) watchOS3, which included the workout and the App running activity.

  Today, I went for a Cycle in the open air which I followed him on my Apple Watch (I brought my iPhone with me). I finished training and saved. In total, I had worked for 53 minutes, however, he wasn't to my activity.

  In business, he told me that I've only made 26/30 minutes of exercise, even though at the bottom it says 'Outdoor - 8.67 km Cycle'.

  I called the Apple Support, but he just told me to disable the pairing and re - pair my watch, which did not help. I was told that they were "redevelopment of their tools" and therefore could not diagnose my problem, so they told me to call back tomorrow.

  Why I write here today, it's just to see if someone has had this experience, and if you know how to solve this problem. Any help is appreciated.

  Thank you!

  Hello

  Progress toward your daily goal of exercise of credit, the application of the activity aims to identify the activity equal or exceed the equivalent intensity of a brisk walk. This requirement applies for general daily use and during the recording of training through the app to training sessions.

  Appropriations for the financial year is awarded for each full minute during which this condition is fulfilled. It is possible that not all of your cycling workout meets this requirement.

  The definition of a brisk walk varies from one person to another and depends on your personal information. To verify that this is correct - and update over time:

  • On your iPhone, in the application of the watch, go to: My Watch (tab) > health > edit - tap and adjust the settings, then press on in fact.

  Apple Watch uses different sensors and data sources to track the results of training sessions, depending on the type of activity. For example, with Apple Watch (first generation) and the models of series 1, the watch can access data matched iPhone GPS if it is taken along during the walk outdoors, running and cycling training. (Series 2 has built-in GPS).

  Calibrate your watch can improve the accuracy of the estimates made by the activity and workout app app. More information and instructions for calibration of your watch are available via the link below. The article also includes instructions for resetting the calibration data and leave.

  If you prefer to receive credits of exercise during the duration of your training sessions, regardless of their estimated intensity levels, follow them through the application of the training session using 'Other' as the type of activity. This credit a minute of exercise for each minute of the workout. Active calories will be estimated at a rate equivalent to a brisk walk or based on the data recorded by the heart rate sensor, according to what is higher.

  More information:

  • Calibrate your Apple Watch for better accuracy of training and activity - Apple Support
  • Use the activity on your Apple Watch - Apple Support
  • Use of the workout on your Apple Watch - Apple Support

• Auto unlock with Apple Watch does not appear in my window security and confidentiality

  "Disable the automatic connection' or Auto unlock with Apple Watch" appears in my window security and confidentiality

  Hello

  Automatic unlocking with Apple Watch is available for the Mac models since the mid-2013 and later running macOS Sierra.

  Check that:

  • Your Mac has Bluetooth and Wi - Fi enabled.
  • Your Apple ID use two factor authentication (as opposed to the two-step verification):
    • For Apple ID - Apple Support two-factor authentication
    • If you are currently using two-step verification instead, follow the instructions here to turn off (under "How can I disable two-step verification?") before you enable two-factor authentication:
      • Frequently asked questions about the audit in two steps for Apple ID - Apple Support
  • Your Mac and Apple Watch are connected to iCloud with the same Apple ID:
    • On your Mac, choose Apple () menu > System Preferences, and then click iCloud.
    • On your iPhone, open the Apple Watch app, then go to general > Apple ID.
  • Your Apple Watch uses a password:
    • On your iPhone, open the Apple Watch app, then type the access code.
  • Transfer procedure is enabled on your iPhone and your Mac:
    • On your iPhone, go to: settings > general > transfer procedure.
    • On your Mac, go to: System preferences > General - down, tick the option "Allow transfer between the Mac and your iCloud devices."
    • If these parameters are already enabled, a user has found that it helped to deactivate and reactivate the procedure of transfer on their iPhone.

  More information:

  Automatically unlock your Mac with your Apple Watch - Apple Support

• IMessage Apple Watch has two interviews separated with the same person?

  My new Apple Watch has a problem with iMessage and I know how to fix this on my iPhone but not watch?

  On my iPhone, that my ID apple is connected to more than 10 devices and sometimes when a new device is added, it adds the addresses on my apple for iMessage and FaceTime ID and I always fix by unchecking the addresses that I don't want in the application settings under "Messages" and "FaceTime." However, this isn't the same thing to watch because there is no option in the settings on the Apple Watch and the watch App on my iPhone.

  I would like to help please?

  Hello

  Apple Watch uses the same parameters (for how you can be reached and how new conversations are started) for Messages as your iPhone.

  If you have two interviews separated with the same person, the following steps may help:

  • On your iPhone, check if there is more than one contact form in Contacts of this person (if so, remove duplicates).
  • Delete old Messages conversations with this contact on each of your iPhone and watch:
    • iPhone: app Messages > swipe to the left on a message thread > delete.
    • View: Open the Messages app (from the home screen, which is accessible by pressing the digital Crown) > swipe to the left on a message thread > tap on Trash / delete.
  • On your iPhone in the app Watch: Watch My > general > reset > press reset sync data:
    • You won't see anything happen after pressing it (the process runs in the background, invisible to the user).
    • Leave a minute or two to allow the course ends.
  • Restart your iPhone and your watch (turn the two together off the coast, then restart your iPhone first):
    • Restart your iPhone, iPad or iPod touch - Apple Support

    • Restart your Apple Watch - Apple Support

• my Apple Watch lock?

  HI ibuy a Apple Watch used but its loked?

  You can have a read through this first - on lock of Activation on your Apple Watch - Apple Support

  My advice would be to return the Apple Watch, if possible, to anyone you bought it for a full refund.

• How to add and schedule a workout with Apple Watch?

  I have a Garmin watch and I can easily create a restructuring plan (of the web database) and transfer it to the watch. My training is a series of market, slow and fast running at different times during the workout. Anyone know if I can do the same thing with the Apple Watch? Thank you!

  You will find here how to customize your workout on Apple Watch use the app to your Apple Watch - Apple Support training