Need Advanced Port Replicator III drivers for use with my Portege M300

Similar Questions

• Advanced Port Replicator III and Tecra M5 - compatibility issue

  Hi all

  Had a brief search, but could not find a similar position.

  Is the Advanced Port Replicator III PA3314E-1PRP compatible with a laptop Tecra M5?

  Thanks in advance and amicably.

  James

  Yes, it is compatible, I can confirm this info above
  If you wish, you can consult the Web of Toshiba Europe site Options & accessories.
  You will find this info useful

• Where can I download a manual for Advanced Port Replicator III more

  Where can I download a manual for this?
  I have searched the manuals download section but could not find a reference to it.
  Thanks for any help

  Seems that this manual is not available in the Toshiba user manual page.
  But generally, you should receive a manual as well as the Advanced Port Replicator III more.

• Tecra M9 longer works with the Advanced Port Replicator III

  Hello

  I have the Advanced Port Replicator III Plus (PA3474E-1PRP), and it works very well with my M5 (M3 and M200). For example I connect my laptop through it to my monitor/mouse/keyboard/external DVD/hard drives, sound, webcam etc...

  Now, I'm to assess what should I buy as my next laptop and the M9 (PTM91E-03000MEN) seems good.

  Question: * the M9 will work with my plu III advanced port replicator? *

  Otherwise, * y at - it another docking station option that will allow me to connect a M5 and an M9 * please? (of course not at the same time).

  If there is no solution that allows a single docking station for the M5 and M9, then I might as well choose a laptop from another supplier... Main reason to stick to Toshiba all these years is the docking station compatibility that I move older models to the newest...

  All thoughts welcome...

  See you soon
  Daniel
  --

  Tecra M9 and Tecra M5 do not have the same docking connector.
  This means Tecra M5 is the APR III +, Tecra M9 has Express Port Replicator.
  You need the correct docker for each system.

  May it is a solution to be able to use the Toshiba Dynadock. It's USB based:
  http://www.dynadock.com

• Advanced Port Replicator III more compatible with the Portege R200

  I just ordered a new Portege R200 and above-port replicator... However, I note that the R200 is not listed in the list of laptops supported for this Replicator! Can anyone confirm if I have made a mistake and need to change the order?

  Will be

  I visited the area Options & accessories on the European site of Toshiba, and like you said the Portégé R200 is not listed in the list of mobile phones compatible.
  So I assume that the Advanced Port Replicator III more (PA3474E-1PRP) does not support the protected R series.

• Tecra M3 and Advanced Port Replicator III: not recognized as docking station

  Hello!

  Just install my new M3 and Advanced Port Replicator III. Everything works fine, but the Port Replicator is not recognized as a Docking Station (No disconnect in menu button start XP; pressing disconnect button on the Port Replicator itself has no effect either).

  Is TI WHEREAS behavior?
  Thank you in advance.

  Hello

  You reinstall the unit with the recovery CD?
  As far as I know that the TOSHIBA Mobile Extension3 for Windows XP is responsible for the good condition of the market of the docking station.
  Well, I recommend to reinstall this driver and utility.
  Perhaps the installation of the new driver will solve this problem.

  Good bye

• Tecra S3 Advanced Port Replicator III more: video output, analog & digital

  I have a Tecra S3 in association with Advanced Port Replicator III.
  I can't get the two graphics cards to work together.

  The analog and digital video output should work together.

  It works on a Tecra S2, but not on the S3?
  Does anyone have an answer?

  Hello

  You want to use both outputs DVI and VGA on Advanced Port Replicator III graphics more simultaneously?

  Advanced Port Replicator III more supports the use only if the computer system unit laptop itself also supports the simultaneous use of RGB & DVI.

  So that would mean that the backs of Tecra S3 not supported this feature

• How can I find Canon CP910 printer drivers for use with OS10.11.3?

  How can I find Canon CP910 printer drivers for use with OS10.11.3?

  Download the player package Cannon from Apple or get your driver from the Canon support site.

  V3.3 Canon for OS X printer drivers

  Canon Laser Printer Drivers for OS 3.1 X

• Tecra M3: Failed to connect to the double monitors w / Advanced Port Replicator III

  I use a Tecra M3 I put it in place for an III Advanced Port Replicator and I can't dual display to work properly. I have a monitor connected to the DVI port and then another connected to the VGA port. It seems that the laptop is the 1 view and can get only one monitor to work. How can I get the two external monitors to work?

  Thank you
  MBorchardt

  Hello

  In my opinion, you can use a single external screen because you can choose between analog display, the TV and digital flat screen. As far as I know, you can use the FN + F5 keys to change between display devices and can only be set to an external TV or CRT and LCD monitor internal. But not to external displays.
  In addition, I propose to refer to External monitor in the manual which is preinstalled on this device.

  Good bye

• Tecra M4: Cannot get com-port working on Advanced Port Replicator III

  Hi all

  I bought the advanced III PA3314E-1PRP port replicator but could not get work com-port.

  It does not get listed in my equipment manager.
  Anyone has an idea why not?

  Thank you very much in advance!

  See you soon

  Infinito

  I agree with Akuma
  (The name says it all) port replicator replicates the available ports on the laptop.
  If your laptop does not have this port, then you cannot use it with Port Replicator.

• How better to configure ports of ether-channel for use with iSCSI?

  I had a quick glance and find a number of different discussions about the best solution for simlar scenarios but nothing quite close enough to convince me to implement the proposed solution.

  The configuration that I was left with is not ideal, because it is not redundent. So I need to find a quick solution pritty.

  Two cards (each NIC goes to different switch) - Console of Service

  Two network cards (both in the same key) - vMotion

  Two network cards (they both go to the same switch) - Prod (10 discussions)

  Two network cards (they both go to the same switch in an ether channel) - storage (iSCSI)

  The environment is a cluster of three ESXi 4.1 ENT U1 + environment, connected to a vCenter STD.

  Here's what I intend to allocate, but hoped a nice person enough to suggest the best configuration. I realize the number of connections to Prod is excessive and we will reach neaver as bandwidth, but I have free network cards.

  Two cards (each NIC goes to different switch) - Console of Service

  Two cards (each NIC goes to different switch) - vMotion

  Four NICs (two pairs in different switches) - Prod (10 discussions)

  Four (#) - storage (iSCSI) network interface cards

  The part that concerns me is get the configuration for storage network cards just like we use the ether-channel, which seems to complicate things from what I've read.

  So in summary I want to use four NICs for storage and bandwidth is not wasted I currenlty have using the channel of the ether. If I can work it another way without the use of ether-channel I am pleased to see again.

  If I have not provided enough information to evaluate, please let me know and I'll give you more.

  Thanks in advance for any helpful information.

  So in summary I want to use four NICs for storage and bandwidth is not wasted I currenlty have using the channel of the ether. If I can work it another way without the use of ether-channel I am pleased to see again.

  First of all, let me squash the myth an EtherChannel gives you additional bandwidth for iSCSI. Each iSCSI initiator can use an uplink to an iSCSI target vSphere being limited to a hash value "IP". Given that the source and destination IPs are always the same, the hash is always the same.

  I wrote about it here in my post seriously, Stop "Using Port channels for vSphere storage traffic":

  http://wahlnetwork.com/2013/03/05/stop-using-port-channels-to-vSphere-hosts/

  I recommend to use the vmkernel ports link. It is available in 4.1, but not through the GUI.

  http://pubs.VMware.com/vSphere-4-ESX-vCenter/topic/com.VMware.vSphere.config_iscsi.doc_40/esx_san_config/configuring_iscsi/t_connect_software_iscsi_initiators_to_iscsi_vmkernel_ports.html

• Who need way to CS6 download file for use with the product key that I let go computer breaks down only.

  Martine is a copy of what happened before you ask a question, in the case of any use:

  Do you want to now support the CS6 file that I can download so I can use the product with her key?

  Thank you

  Ronald Stein

  De : Adobe < deleted by the moderator >
  Sent: April 14, 2016 15:39
  To: Ronald Stein < deleted by the moderator >
  Topic: Transcript of your chat

  For additional help, contact us at the http://helpx.Adobe.com/contact.html

  General information
  Cat start time	April 14, 2016 10:18:46 CEST
  End of conversation	April 14, 2016 10:39:06 AM IS
  Duration (time real cat)	00:20:20
  Operator	Abdelmouneim

  Transcript of the chat

  info: Thank you for your patience.
  
  In the meantime, you can try our community forums where experts are available 24 hours on 24, 7 days a week
  
  
  info: now you are chatting with abdelmouneim.
  Please do not close the discussion window or browser tab because it will end our chat session.
  Abdelmouneim: Hello! Welcome to the Adobe Customer Service.
  Abdelmouneim: I'm reviewing your question. Please stay on the line and do not close the chat window or browser in order to ensure that our chat session is not interrupted.
  Abdelmouneim: as directed by your submission of cat, I understand that you want to have the serial number for cs4. Is this correct?
  Abdelmouneim: are we still connected?
  Ronald Stein: so I only now and do not cloud use yet, so asking this way for you to find my file to see if I had CS6.
  Abdelmouneim: Thank you for the information.
  Abdelmouneim: Please allow me 1-2 minute (s) to review the details of your account.
  Ronald Stein: do you need my e-mail address and possibly password?
  Abdelmouneim: No, thank you
  Abdelmouneim: I am able to see the serial number for Cs6 in your account, please sign in control.
  Ronald Stein: I do not understand what means 'please connect the control'?
  Abdelmouneim: no problem, I will guide you.
  Ronald Stein: Thank you
  Abdelmouneim: step 1-to view the list of your registered products and their serial numbers, go to the accounts of Adobe and sign in using your Adobe ID and password.
  Abdelmouneim: Are you connected?
  Ronald Stein: . I found impossible to do - that's why I'm talking to you. Please give the link I couldn't find,
  Abdelmouneim: , I'll send you the serial number.
  Abdelmouneim: Please let me 2-3 minutes.
  info: your chat transcript will be sent by < deleted by the moderator > at the end of your cat.
  Abdelmouneim: Please check your Inbox.
  Ronald Stein: which will take at least 10 minutes, as it has been like this for days now!
  Ronald Stein: I still keep this connection open as well after I received your email afterwards? He will give Details of the CS6 if I?
  Abdelmouneim: Okay, please check and let me know.
  Abdelmouneim: you can contact us again if you face any issue, I'll keep the case open.
  Ronald Stein: while I myself can this disconnect now?
  Abdelmouneim: , Yes.
  Abdelmouneim: is there anything else I can help you?
  Ronald Stein: Thanks for your help so far! À.
  Abdelmouneim: Please contact Adobe.  We are available 7 days a week, 24 hours a day. Bye!

  Hello

  You can find your series here key https://helpx.adobe.com/x-productkb/global/find-your-serial-number.html

  Find the link to download here: https://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html

  Let us know if this helps!

• Portege M750 on plu III Advanced Port Replicator

  The Portege M750 works on Advanced Port Replicator III more (PA3474E-1PRP)?

  Hello

  I discovered that the Express II port replicator is compatible with the Portege M750.

  I searched a bit on google and found this link to an Advanced Port Replicator III over the datasheet. But it s only in German.
  http://www2.inmac.de/inmac_assets/PDF/German/e569412_datasheet.PDF

  However, the M750 Poretge is not listed as a unit compatible and taken in charge.
  So I guess that more Advanced Port Replicator III cannot be used with protected M750 toghterer

  Welcome them

• III Plus driver/Frimware Advanced Port Replicator

  Hello

  I'm having some trouble with my M300 Poretege on Advanced Port Replicator III Plus. Some Fn keys do not work, and I'm not able to get proper display on my external monitor.

  Question: are there drivers for the Port Replicator? I don't have a CD or other installation media.

  Thank you, Richard

  Hello Richard

  Give us details please! These FN keys work without portreplicator? Don t FN keys work correctly?

  Check if the graphics card supports display resolution you have to put on the external screen.

• Tecra A8: Problem with the USB printer connected to the Port Replicator III

  Hi all

  I have a problem with my Tecra A8, year Advanced Port Replicator III and a USB printer. With the printer connected to a USB port on the Port Replicator, I have to wait 2 minutes for printing to start. When it is connected directly to a USB port on the laptop and the laptop disconnected from the Port, printing starts immediately. I have the latest drivers from the Isensys of Canon LBP 2900 installed and Windows Vista professional as the operating system.

  I called the technical support of my country, but her is not recorded similar problems.

  A person with similar problem? Some help would be very appreciated.

  Thanks in advance.

  Hello

  Seems like a strange question... Already done the standard procedure in the event of such errors? :)

  The standard procedure is somehow similar to the following:

  -Update your BIOS
  -Update all the drivers for your machine
  -Update your printer drivers
  -Update your operating system

  If all else fails, then try an another Portrep if available, maybe you need to contact your dealer for an another portrep for the test.

  Something like this should be your way. And then you sucessfully made a TROUBLESHOOTIN´ ;)

  I'd be happy to hear feedback from you on your situation...

  Welcome them