need audio mono via headphones

I was using a phone LG Optimus L90. A primary use of my smartphone is going to be like a music device. The L90 was very good, with the exception of a drawback as such, the speaker was in the back of the phone. Recently, I came to realize how well LG sets up their phones. I find that I can't do without at least a LG, mono audio output characteristic, and since my audience is slightly lower in the left ear, I could use balance between the L - R channels as well. These two parameters are on LG phones in general settings in the section under the heading of hearing accessibility. These settings are there to help people with hearing impairments. It is admirable of LG, nevertheless that it confuses me greatly to know that these settings are not the standard Android adjustments available in the sound settings section. I am not hearing impaired, but I have a strong preference for listening to music in mono in particular when listening through headphones. I don't really like music that was arbitrarily divided into channel components, that is not the way I listen to music. I listen to a lot of historical records that were not particularly well rendered in stereo. Yesterday I listened to one of my favorite artists. This guy was ahead of his time, in harmonic and rhythmic terms, but he played with a rhythm section of his time who were mediocre, at best. It is the type of stereo Audio on my LG L90 has been defined. and the music sounded terrible. Stereo was separated on the drummer, almost all alone in a channel he used brushes making its very sharp, distracting, if not downright annoying, as it was just time for maintaining a way boring and repetitive. The music sounded so terrible, and I love this artist so much, I've adjusted the audio back to Mono so I was driving home in the car. He did an enormous qualitative difference in the listenability of this track to the drummer in the group where it really doesn't have its evil. This is just one example. In general, I find mono more reliable for music playback, so I would probably put audio in mono and leave it there just to avoid experiences like that I just described. If you want me to expose on the theory behind my preference for mono audio output, I do reluctantly. But here's something to consider for Google and Motorola. I find that listening in stereo through headphones is very distracting, unpleasantly awkward for me. Now, have you ever heard of the distracted driving as a result of the use of the cell phone? This is the big problem.

In any case, to continue, I am disappointed that my new Moto G 3rd gen doesn't support mono audio output. Frankly, which is a deal breaker for me because I use my smartphone to listen to music, and I find stereo headphones to be distracting, unequal, unbalanced and often inaudible. I'm not thrilled about installing buggy 3rd party applications like PowerAmp, or using clumsy from stereo to mono plug adapters. Regarding the latter, is there a problem with impedance matching when you use such an adapter? Another concern is that mono audio output audio stereo WRT with loss? You know, I saw a hack for Mono Audio Out in less than 20 lines of code (on XDA). Why Motorola cannot provide a fix for this? Stereo/Mono is a fundamental parameter for listening to music. And throw into the balance between channels from left to right while you're there. I feel that LG is the only one who has any common sense in this regard. It makes no sense to produce a listening complex as the smartphone device and provides no user choices listens to Basic.

So, in practice, for this device works for me as I want, I need to root it. Is it not so?


Tags: Motorola Phones

Similar Questions

  • How to make my computer send all audio data via an optical audio cable instead of making headphones?


    To listen to the radio online or CD played from my computer, I used to connect the computer to my entertainment system at home since the headphone jack of the computer to the port on my home entertainment system.

    Now, I wanted to get a better sound and bought the optical audio cable. However, I don't know how to tell my computer to send the audio signal to the system entertainmeny home via digital cable optical, rather than by the headphone. If I just disconnect the cable between the headphone and the port to THE and have only the PC and the system connected with the optical audio cable, I can't hear any sound. I suspect that the computer is not sending the data through the optical audio port. I'm not able to figure out how I can adjust the settings on my computer so that, from now on, all sounds are emitted through the optical audio.

    (1) I want to do it especially for my desktop HP (configuration below) and advice on how to do this would be appreciated.

    (2) I also have a HP laptop (configuration below) and I was wondering if this would be feasible too (even if she does not have an audio output, but it has an HDMI output - you can convert audio optical?)

    Thanks in advance!

    My office is:

    WANT to h8xt,
    • Windows 8 64
    • 3rd generation Intel (r) Core processor quad-core i7-3770 [3.4 GHz, 8 MB of shared cache]
    • 12GB DDR3 1333 MHz SDRAM [3 DIMMS]
    • 1 TB 7200 RPM SATA hard drive
    • No secondary hard drive
    • 1 GB AMD Radeon HD 7570 [DVI, HDMI, DP, VGA adapter]
    • 300W power supply
    • DVD SuperMulti burner
    • LAN wireless-N (1 x 1) card
    • 15-in-1 reader cards, 2 USB 2.0 (front), 2 USB 3.0 (top)
    • No additional desktop software
    • No additional security software
    • No TV Tuner
    • Beats Audio (tm) - a built-in studio quality sound
    • HP USB volume control keyboard and mouse with Win 8 keyboard
    • Adobe Premiere Elements and Photoshop Elements 10

    And the laptop:

    HP ENVY 15t Quad

    Hello @_goma,.

    Welcome to the HP Forums, I hope you enjoy your experience!

    I read your post about how you want to send all the audio data via an optical audio cable instead of the headphone jack of your computer, and I'd be happy to help you in this case!

    To configure your desktop computer to activate the optical audio cable, I advise you to follow the steps below:

    Step 1. Click on the button of the Windows key on your desktop

    Step 2. Type "Control Panel."

    Step 3. Select "Control Panel" in the upper right corner

    Step 4. Select sound

    Step 5. On the Read tab, right click on the white box under available devices

    Step 6. Select "Show disabled" and "show disconnected devices".

    Step 7. Connect your Audio optical cable

    Step 8. Select your cable Audio perspective as the default device, and click 'enable '.

    Because it is not possible to convert the audio output HDMI output on your laptop, it is regrettable that the laptop is not able to connect with an optical audio cable.

    Please re-post with the results of your troubleshooting, and I look forward to your response!


  • Sound suddenly does not work but the bars audio always in movement. Windows 7 audio driver: VIA High Definition Audio

    I turned on my pc and tried not to watch a YouTube video when I realized there is no sound playing. I tried to play a video file saved on my pc, still no sound. tried an mp3 player and still no sound. everything worked very well 24 hours earlier. the green bar on the sound in the status bar icon moves when I play something, but I can't just release anything.

    motherboard: ASROCK N68C-S UCC
    audio driver: VIA High Definition Audio

    Windows 7 latest updates installed.

    I have spent 10 hours reading all over the internet and have done the usual troubleshooting:

    • system restore
    • Driver update (from disk as well as site)
    • try different audio jacks
    • using different external speakers
    • playback enabled devices
    • System speaker levels are full
    • active volume equalizer
    • used Microsoft Fix it Audio Playback, which is no problem
    • Run the audio Troubleshooter in Control Panel, no problem found

    I even reformatted and reinstalled windows, hoping it would be like, but it was useless because I still have no sound.

    can someone please help me find a fix for this.
    If a system format has not fixed the problem, im only left thinking that its edge is completely dead and I need a new sound card?


    I imagine the inconvenience that you are experiencing.

    I suggest you refer to the section 'I tried all solutions here and still can get my sound to work correctly ' from the link:

    Tips for solving common audio problems

    I hope this helps. If you have any other queries/issues related to Windows, write us and we will be happy to help you further.
  • Send transcoded clip in Premiere Pro with audio Mono


    I noticed that others have asked this question around August 2013 but haven't seen the progress made on this issue, which is that we prefer to edit in Premiere pro with mono audio tracks, but we are unable to transcoded material to come with audio mono prelude.

    We need to have total control over our audio tracks and for us in an environment News/FRA, which also means the production of early recovery.  So we want to choose the part of the clip XDCAM what we want as a prelude, send it to Premiere Pro and laid the grabbing of the interview (for example) on track 1 of the timeline with only talent audio mike (which has been recorded on the channel of the camera 1) and must not pan it or worry about making big thing to her.  Then, we cut the rest of the overlay with sound effects that are recorded on the channel 2 go directly to the track 2 on the timeline.  When transmit us to Headquarters that we send them two discrete audio channels: talent/VO on channel 1 and channel 2 effects.

    We have only one problem when transcoding is involved.  With the audio preferences in PrPro 'Mono', everything is fine, it's just that when prelude to transcode a video makes the audio a hassle for us, because it can only come to PrPro as a stereo audio track.

    Adobe, he's never going to be the ability to just a prelude preference to send audio with Mono clips, as there are in Premiere Pro?

    Or someone has figured this out, and miss me him just something?

    In Adobe Media Encoder, set up a new preset that has the video and audio parameters, you want to have your images transcoded for source:

    Then name and save this preset. The next time that you start the prelude, the preset will be an option to choose to use for transcoding of your hardware.


  • Flex 14 issue of Audio in Jack / headphones

    Hey, I have a flex 14 ideaPad and until recently all worked without problem audio-wise (when headphones have been and is not plugged in), except for randomly a couple of days, when I plugged the headphones in the plug and no sound came through the headphones or the speakers, although the headphones were detected by the laptop. When I unplugged the sounds would come again through the speakers.

    I tried again with a different set of headphones, but the problem came back that lead me to believe that the problem is with the laptop, after searching solutions online, I decided to remove it and then reinstall the Player audio (Realtech HD Audio Manager). This fixed the problem for a few days, but now the same problem is back. I'm confused as to whether this is a hardware/software problem based as when I reinstalled the driver he solves the problem, so he could not really related material being.

    If anyone knows what is the problem? Should I just continue to remove and reinstall the driver? Once again the helmet are detected by the laptop, they do not appear as their own reading device (is it always the case?)

    Thanks, Tiernan

    The configuration of Realtek on the Flex has Windows only show a single, common system for all the audio outputs.

    Here is the latest driver from Realtek. If the problem persists after, I would recommend a warranty call.

  • Audio in the headphones, speakers Dead works

    ThinkPad T520. Win 10 Pro. After a reboot directly after the 10586.3 update, I lost audio to the speakers. Audio in the headphones is very good. Any ideas would be greatly appreciated.

    Well, all uninstall connected to the sound system and re - install has nothing. Then, in the middle of all the frustration, the update of 1511 for X 64 systems was pushed. After that the installation and reboot, to his return. Heard as soon as the desktop appeared. Obviously some kind of flaw in the previous upgrade ruined something and the update of 1511 repaired. Microsoft mysteries continue. In any case, done deal.

  • Need Audio drivers for Windows 7 installed in HP pavilion dx5000 Laptop (laptop)

    I need audio drivers for HP pavilion laptop computer dx5000 (notebook) that can work with Windows7


    1. what exactly happens when you try to play to any audio?

    2. What is the exact model of your computer?

    I suggest to select the appropriate template from the computer and then try to download and install the drivers from the link.

    No sound in Windows:

    For all windows questions do not hesitate to contact us and we will be happy to help you.

  • I want to install windows 7 and I get an error saing that I need to install via windows PE? How can I go about it?

    I want to install windows 7 and I get an error saing that I need to install via windows PE? How can I go about it?


    1. you try to perform a new installation of Windows 7?

    2. where did you buy the Windows 7 DVD?

    This particular message occurs generally if you try to perform an upgrade on the spot of a recovery disc or installation support OEM (Original Equipment Manufacturer) that contains a custom defined configuration and can't stand not running an upgrade installation.

    The message means that you probably need to start using the installation media. You can also contact the manufacturer of your computer to determine the type of installation media that you have and to confirm what options are available when booting from the disc.

    Here are some links that provide additional information about the installation of Windows 7:

    Alternatively, you can consult this article to understand what is Windows PE. (v = WS.10) .aspx

  • Need to separate the headphones of speakers on x 51 but does not open realtek, only audio alienware

    Basically, I need to open the Realtek program, but it seems to be more written by alienware audio because it is in my list of installed programs, however, when I try to open it, the only option I get is to uninstall it, after watching a few videos of how find and open the ect, it seems that the audio alienware is instead the realtek program.

    I am wanting to split the sound from my headphones and speakers as currently it comes out both when I want music on my speakers and Skype through my headphones. I know that realtek has an option for what you can do two different audio channels. Earlier when I plug my headphones, it records under involved as well and not a separate playback device. Audio Alienware does not have this option and as I said, Realtek won't open.

    If anyone knows how to get Realtek to open or has a work around fix I would be grateful, thanks in advance.

    It looks like your drivers are twisted. Others have reported similar problems. I don't have this machine. If you solve this problem and use your analogue headset, try uninstalling all audio drivers (and their audio control panels) and try to install the appropriate drivers. Maybe even leave the Windows driver load.

    But you know what would be the easiest?

    Buy a cheap USB for Skype headset. It will use the "sound card" in the headphones. In addition, it is digital for all.


    EDITED: Oops, this other helmet was analog. These are the two digital USB with its built-in card circuits. Corrected message.

  • Re: Portege R100-11Z no audio signal through headphones/mic not taken, via its USB OK


    I did a clean install on my Portege R100-11Z of windows 7 and later a new clean install of Windows XP Prof SP3.

    In both configurations, I have no sound from the headphone/microphone jacks. (yes I check all the options: mute / his wheele next / new drivers / Toshiba eliminate program "mute" e.t.)
    All the configuration looks OK. I don't see anny WARNING/message in the configuration settings.

    But I hear via a USB headset via the USB.

    Looks like the built-in sound card Driver works OK because I get the sound through the USB.
    What is the solution to get the sound through the headphone/mic shots?

    Thanks for your help/advice.

    Will be

    > In two configurations, I have no sound from the headphone/microphone jacks.

    But that the sound from the speakers?

    Theoretically, it could be possible that the headphone is faulty
    Inside the headphone jack there is a little switch that switches between speakers and headphones.

  • Audio input on mac (MacBook Pro (retina, 13 inch, mid-2014) which has a single audio port for headphones and number of PORT of ENTRY.

    How to do on my MacBook Pro (retina, 13 inch, mid-2014), which has only a headphone audio input port? Do Garageband, or Preferences/audio, or Audioand MIDI or what?

    Connect an audio interface to a USB port to have an audio input, or insert a divider entry in the headphone port. You need additional hardware to have an audio input.

  • How to play audio through the headphones and computer speakers, at the same time.

    Hey I just need to know how to play sounds through the headphones and speakers. Help

    Depends on your audio device.

    If its edge, while normally when you plug the headset switch will cut off the speakers.

    If you have a USB or Firewire pro device you can listen to your headphones as the signal played through your speakers.

    See you soon,.

  • Audio works with headphones, but not the speakers

    Hello, I have a DELL XPS17.  The sound works fine with headphones, but no sound when the headphones are disconnected.

    Note that I had the opposite problem (its good speaker, but no helmet) and then updated the driver.  Once the new driver has been installed, the problem was reversed.  Very strange: Pei

    Last driver installed is Audio_RLTK_W7_A05_Setup-J3VMR_ZPE

    Thanks for your help!

    Hello. You can test your speakers by running test audio fast ePSA or PSA tests.

    You can test the audio driver by opting for the native Windows audio driver. If you get the same symptoms with the native driver, then you can exclude a bug in the driver from Realtek. This Realtek driver has been around for awhile now and has no bugs that I know.

    • 1. open Device Manager (found in the Control Panel, or type devmgmt.msc in the search box).
    • 2. develop the 'audio controllers, video & game' and right click on "Realtek High Definition Audio".
    • 3 Select this option to "Update driver software".
    • 4. click on "Browse my computer for driver software".
    • 5. click on "Let Me pick from a list of drivers on my computer".
    • 6. put the "Show compatible hardware" check box if not already checked.
    • 7. in the list of devices, click on 'High Definition Audio"(native driver).
    • 8. click on "next".
    • 9. in the update driver warning box, click 'Yes' (the driver).
    • 10 restart the portable computer if you are prompted. If not invited, so no need to restart.
    • [To return to the Realtek driver, do it again but reverse steps 2-7 names].

    If the speakers and the driver to pass the tests, you might have failed to sense pin into the headphones Jack, explained in the FAQ of Jack for headphones.

  • How to export the audio mono 8 times fast track for broadcasting stations?

    Hi, I work for a post for ads home. We head to a format without tape for control and file delivery to stations and get to the extreme.  Is it possible to use the first to export a single file with 8 mono tracks to support a 5.1 mix (channel 1-6) and a stereo mix (7-8). We need the file contains all 8 as mono audio tracks individual tracks.

    Hi FastCuts_Dallas,

    Check out this post from blog by Gerard Tay: - quicktimes-in-first-pro -

    Hope that helps!

    See you soon,.


  • Export of media with audio mono

    I am working on a project that uses images that has been saved to the camera in stereo using the two channels and stereo using only the left follow. I am a novice with Premier Pro and ask yourself how to export this project to the media with audio in mono. I need to export it in SD for Vimeo and also as a MPEG2_DVD format.

    The Church, so that I do the project complained during playback of the video through their projection system that all the audio that was recorded in only the left lane was not playing when I exported stereo files.

    The project has also other audio tracks (background music, etc.) which are stereo.

    Thanks for your help

    I use first Pro CS5

    You can use the Fill right method, or create a sequence with a Mono Master track.

Maybe you are looking for