Need driver NVIDIA GeForce Go 6600 graphics - Qosmio G10

Hello

I m contacting you on behalf of the client.

I have a Qosmio G10 laptop which had a mobo and graphics replaced by Toshiba

Toshiba said that the new Intel 915 pm chipset express chipset and graphics is now, NVIDIA GeForce go 6600.

I found all the drivers, but the graphics.

Help, please

Hello

As far as I know, NVIDIA GeForce Go 6600 graphics card built also in Qosmio G20 and Qosmio F20

So check out the European driver of Toshiba page and download the GPU drivers that have been published in the series Qosmio F20 PQF20E or Qosmio G20 PQG20E.

Welcome them

Tags: Toshiba

Similar Questions

  • need driver NVIDIA GeForce 6150 SE and NVIDIA nForce 430

    I can update this driver because I can't go back or get help from Nvidia\ and it seems that there are 2 pilots of different type from the Manager of devices for widows update instalation I don't know why NVIDIA GeForce 6150 SE and NVIDIA nForce 430 is what in my device manager and my control panel , it shows an another nvidia drver tha a ge force 6100 nforce 430. someone please help me with what I think if I resove this then it will update this driver can then I can update BOF IE7 and IE 8

    Find you the driver you need?

    SP2 is usually delivered via Windows Update

    To find out if SP2 is already installed

    • Click the button start , right click on computer and then click Properties.

      If Service Pack 2 is listed in the Windows edition section, SP2 is already installed on your computer and you do not need to follow the instructions below.

    You can install it manually using the link here

    http://Windows.Microsoft.com/en-us/Windows-Vista/learn-how-to-install-Windows-Vista-Service-Pack-2-SP2

  • Big screen update driver for Geforce Go 6600 on Qosmio F20

    Hello Toshiba users!
    I bought a flat screen of the Samsung 226BW 22 ".
    I need a new graphics driver to use the resolution to 1680 x 1050. Can run even 1440 x 900.
    Would be happy if someone can give me a tip howe for get a driver for it.
    With greetings/Tegel

    Hello

    Do you need it for XP or Vista

    Anyway, you can find it here: -.

    http://www.laptopvideo2go.com/drivers

    you need to read how to install (for example: replace 'nv4_disp.inf' to make it work)

    Good luck ;)

  • Tecra S2 - resolution for external monitor on NVIDIA GeForce Go 6600

    Hello! I'm new here...

    I have a Tecra S2 with Windows XP SP2 and a NVIDIA GeForce Go 6600 graphics card. Internal (laptop screen) resolution is 1024 x 768. His job very well. But I work with an external VGA monitor with function "DualView". It is a Samsung Syncmaster 940N.

    CA? s all OK (19 ", resolution 1280 x 1024), with my new Samsng Syncmaster 203 b monitor do not work: the native resolution of the external display is 1400 x 1050, but the maximum available resolution is 1280 x 1024. And so, with resolution 1280 x 1024, will cause the image on the external monitor and text is not clear.

    I can't set the resolution 1400 x 1050 via Panel control, or through NVIDIA-menu.
    Graphics card drivers are updated to the latest version on the Toshiba site. NVIDIA GeForce Go 6600 graphics card is supported to my Syncmaster 203 b monitor.
    Maximum resolution of video output from NVIDIA GeForce Go 6600 is superior as a 1400 x 1050.
    I need to use this new monitor, can you help me?
    Thanks in advance!

    Unfortunately, the Tecra S2 is not able to display the resolution 1400 x 1050.
    Here are the resolutions that you can use.

    Support Resolution/Color (CRT)
    16-bit/32-bit 640 x 480 (function CRT) color
    800 x 600 16-bit/32-bit colors (according to the CRT)
    1024 x 768 16-bit/32-bit colors (according to the CRT)
    16-bit/32-bit 1280 x 1024 (function CRT) color
    1400 x 1050 n/d
    1600 x 1200 16-bit/32-bit colors (according to the CRT)
    1920 x 1440 16-bit/32-bit colors (according to the CRT)
    16-bit/32-bit 2048 x 1536 (function CRT) color

    Can you find a better but not official driver here: http://www.laptopvideo2go.com/enhancer

  • Qosmio F20: I need NVIDIA GeForce Go 6600 for Vista driver

    I need NVIDIA GEFORCE Go 6600 for windows vista driver. But when I try to put the old driver he know that the driver, but windows vista does not support.
    Thank you all answer me.

    Hello

    Unfortunately, it seems that you will not be able to use the Vista me TV tuner!
    The Toshiba didn't publish all drivers vista for this unit and it seems that the drivers will not be published especially for this device ;(

    Maybe you will test the graphics driver from another source

  • Tecra S2: How to change the card Nvidia Geforce Go 6600 64 MB to 128 MB

    Can anyone here help me how to change toshiba tecra S2 vga nvidia geforce go 6600 64 MB to 128 MB?

    Please help me, it's important to me.

    Best regards

    Thank you... for everyone

    Well, what to say.
    A GPU upgrade is usually undesirable because no one can tell if the laptop would be stable after this replacement. So generally I would not recommend doing these upgrades.

  • HP 120-011 to: attach a new Nvidia Geforce GT 710 graphics card to HP 120-011 in

    Hi, I want to install a new graphics card on my desktop pc HP 120-011 in . My office is currently integrated Intel HD graphics 4400 . I recently bought a Nvidia Geforce GT 710 graphics card, but when I inserted in a PCI-E port, the pc is not able to detect it. So here's my questions-

    1. why this graphics card is not detected by my pc?

    2. then the 180 Watts PSU, which is installed on my system to manage this card? If not, should what power supply I buy?

    Its emergency, quick reply pls. Thanks for the help.

    Hi there @Abhishek_India,

    Welcome to the Forums of HP Support!  I understand that you are having problems with an update of the graphics card.  I'm happy to give you a helping hand with this.

    Looking at the map you want to use: GeForce GT 710 specifications, it shows the following: Minimum System Power requirement (W) 300. This means you want to preferably a power supply in your computer that exceeds this amount, just to be sure.

    Please let me know if it works for you and if it does not solve your problem, please mark this message as a solution. Bravo would be appreciated as well.

  • NVIDIA Geforce Fx 5500 Graphics Card Driver Help in windows 7

    Hello

    I have a Nvidia Geforce Fx 5500 and default windows 7 installed graphics card "Standard VGA Graphics Adapter" now, I tried to uninstall and it said to reboot, but when I reboot it automatically installs the same vga graphics... I've installed the drivers and software from nvidia but the vga standard on wrinkles it graphics card... I tried to update the driver with the nvidia driver and it says the best driver for your device software is already installed windows has determined the driver software for your device is up to date... "graphic card vga standard" without appropriate drivers for my graphics card windows works like crud... I can do... I tried to stop the windows update automatically install device drivers and who did nothing... as soon as the computer restarted, it installed the driver vga... even in safe mode remains the same

    Thanks for your time

    There is no drivers Windows 7 for the GeForce FX 5500.

    You need a new graphics card. Until then, VGA Standard is all you can get.

  • Graphic driver NVIDIA Geforce 6250 has stopped working recent 64 bit upgrade to Windows 7

    I get the blue screen closed and once the system reboots I get the message that my graphics driver for Nvidia Geforce 6250 has stopped working.  It happened several times and I can't seem to find a solution.   The computer six years ago - AMD 64 x 2 and I recently installed Windows 7 XP.  and that's where the problem started.  I read somewhere that Nvidia is no updates for this graphics card.  Is this true?  Do I need a new card?  If I reinstall windows, as well as 32-bit which eliminates the problem.  Help me...

    NVIDIA still has drivers for the 6250 - HERE-

    I really don't think that you would however have the latest version.
    As the card is only a DX9 compatible card, I'd go for the WHQL 197,45 drivers.
    In addition you will still not be able to use the AERO interface because it requires a DX 10
    graphics card.
    Then you get into a situation of having to possibly a new PSU, in function
    your choice of replacement.

    Then we come to the amount of system RAM your machine has - perhaps not more than
    2 GB DDR?  If not, the 32-bit Windows 7 is the best option, but honestly - XP uses very little RAM
    compared to Win7 and is better with 2 GB of RAM or less, especially if you play
    all of the games.

    .

  • Need for new drivers Nvidia Geforce Go 7600 for Qosmio F30

    Hello world

    I need a new version of my video card drivers * Nvidia Geforce Go 7600 * of my Qosmio F30. In the Toshiba web page there is only the version 83.17, but is the only one I have and he's too old, and I need a version more reciently.

    The web page of nvidia can help me, because they do not have the drivers for my qosmio. I tried to use the drivers from laptopvideo2go.com, but it is too difficult to do something on this page with unofficial drivers.

    Can someone help me?
    There is an available new version of my drivers?

    Thank you.

    You could try nVidia drivers of another model of Toshiba, or read the instructions/guides on laptopvideo2go

  • Satellite A100-599 - cannot install the driver for nVidia GeForce Go 7600 graphics card

    Greetings to all!

    Try to install the driver for Nvidia GeForce Go 7600 after reinstallation of the entire system, but without success. Only safe mode is available after this pilot plant, tried with Windows XP, Vista and Windows 7 and with different drivers from Nvidia and Toshiba sites - same result always :(

    Would be happy to be aware of how this problem... Thank you very much.
    Satellite A100-599
    Current OS: Windpws Vista Home premium sp1.

    Post edited by: Airtoground

    Hey,.

    > but without success.
    Does that mean exactly? You get an error during installation or what exactly is going on?

    > Only safe mode is available after the installation of this driver
    Why only safe mode is available? What happens if you start Windows in normal mode?

    And before you start a lengthy discussion: what laptop do you have?

    You may notice no problem if you install Windows recovery disk Toshiba?

  • Satellite A500-1GL - Driver NVIDIA GeForce GT300m for Windows 7 32 bit

    Hi, I'm French, I bought this phone 2 weeks ago, and I did a new install of Windows7 32 bit.
    I'm looking for the display driver (for my Nvidia GeForce GT 300 m), but the only one I found is for Windows 7 64 bit :'(

    Do you know if Toshiba will realease a driver? Do I need a specific driver for my laptop? Or can I install the nvidia official driver (when they go out there)?

    Thank you

    Ivan

    Hello Ivan,.

    I checked the Web from Toshiba site and you concerning the right of no display driver for Windows 7 32 bit. :(

    But I think you can use the display to another series of Toshiba laptop driver. I checked the site Web of Toshiba for Satellite P500, you can find a Windows 7 64-bit display driver, and they are also equipped with nVidia graphics cards.
    Check this driver, it should work!

  • Reference Dell Desktop-replacement for Nvidia GeForce GTS 240 graphics card

    Nice day. I hope an expert can help me.

    My computer: Desktop computer Studio XPS 8100 Dell, intel Core i7 870 2.93 GHz, 8 MB, etc.
    Graphics card: NVIDIA GeForce GTS 240 single memory 1 GB. Reading, not sold at retail and is now no longer available.
    Unit of power: 350 Watt maximum.

    I do not use the computer to play games.

    For various reasons, you can Please provide DETAILS for me a graphics card in replacement of approximately the same 'power' +. I can myself, slot load driver and be operational. Don't not changing other pieces (I hope) and there seems to be so many available graphics cards.

    I hope for the purchase of the graphics card via Internet, British supplier and then abroad for me.

    In the meantime, thank you for your help.

    Leonard

    Hi Skanter - just saw this message-hope it comes in time

    I had this problem with mine - it was also to achieve 90degC. It is caused by a really poorly designed cooling system - the fins of the radiator are locked behind a metal shield and the fan blows into it.

    What you need to do is: -.

    (1) turn off and unplug everything from the PC

    (2) open the side panel and disconnect the audio cables and power of GPU

    (3) remove the mobo

    (4) with the help of a tiny posidrive screwdriver, unscrew the thin metal cover of heat sink

    (5) use a brush to remove all the dirt you may see! DO NOT BLOW IT OUT WITH YOUR BREATH!

    (6) reassemble and hopefully enjoy the silence!

    If you still get the noise the chances are some dust penetrated fan (this happened to me when I used compressed air to blow the heat sink). Replacement fans are as rare as horse poop to switch I could not even one of the original manufacturer (path to the bottom of the chain - don't expect any help from Dell or nVidia here, I'm afraid) but are thankfully easy to fix.

    GTS 240 fan fix: -.

    I do memory-sorry if I get something slightly wrong!

    (1) remove a map as shown above. Once the radiator fan cover will be exposed.

    (2) very gently, using a pair of small screwdrivers hanging under the blower rotor, gently lift the rotor clear of the case. He doesn't want to go at first, but be patient and try and apply steady pressure on each side.

    3) out of the bearing once clean any muck-it only takes a small amount here because of the noise.

    4) applied with a headset, a tiny (and I mean tiny) bit of WD40 (don't know what this is called in the United States-but it's a wonder spray!) for the bearing

    (5) wipe off - you'll need that the strict residue on the tree

    (6) reassemble and get started!

    If you are worried about prising off the rotor (or indeed I was wrong) you can undo the radiator all of PCB by unscrewing the screws with springs on them - this allows access to the screw bit to hold the fan. Then you can cancel these abd slide the cable out which means that you can clean the bottom - but the rotor must always be removed to lubricate the bearings.

    Good luck

    Nick

  • Photoshop CS5 trouble with Nvidia GeForce 8500 GT graphics card

    I use a Nvidia GeForce 8500 GT and Windows Vista graphics card. Also, I downloaded the latest driver from Nvidia site
    and installed correctly. After you start Photoshop CS5 first, everything works perfectly. Also when I close the program and restart, no problems occure.

    If I restart my computer, start the CS5 Photoshop software and open a picture from an existing file, the image may not be displayed on the screen. Also if I start a new file (click file - new-...) the white drawing card is not displayed. The only thing I see is the color of gray background, but also leaders. The thumbnail of the image open or white card drawing is displayed in the browser normally window and there is no error message at all.

    If now I reinstall the NVIDIA driver, restart my computer and launch Photoshop CS5, it works again all perfectly. To run Photoshop CS5 on my computer, so I need to install the NVIDIA driver already installed after each reboot.

    Maybe there's a solution by changing the parameters of VRAM in Photoshop?

    First disable the opengl and see what happens. If it helps, maybe set to "basic". On a sidenote: the latest drivers are not always the best.

  • I want a new Alienware Aurora ALX to have double EVGA NVIDIA GeForce GTX TITAN graphics cards in SLI config. Is this possible with the latest ALX Aurora motherboard has?

    I buy my fiance an Alienware Aurora with these stats:

    Base: Alienware Aurora ALX 875W matte black frame w / AlienFx ColourPre
    Processor: Intel Core i7-4960 X processor Extreme Edition (6 cores, 15 MB of cache, up to 4.3 GHz overclocked)
    ASETEK liquid cooling CPU
    OS: Windows 7 Ultimate SP1 64-bit
    Graphics card: Double 6GB GDDR5 NVIDIA GeForce GTX 780 SLI
    Memory: 32768 (4X8Go) MB 1600 MHz DDR3 Quad Channel
    Hard drive: 4 TB RAID 1 + 0 (4 x 2 TB SATA 6 GB/s, 7200 RPM, 32 MB of Cache)
    Optical devices: 8 X RW Blu - Ray (Blu - Ray, DVD, CD read & write) & 24 x DVD +/-RW
    Sound card: Integrated HDA 7.1 Dolby Digital capability
    Speaker system: Logitech Z506 5.1 Surround pregnant 75W Total
    Game keyboard: UK (QWERTY) Alienware TactX keyboard
    Gaming mouse: Razor Naga Molten
    Two monitors: 2 x Dell UltraSharp U2713HM 69 cm(27") LED monitor DVI, VGA, HDMI (2560 x 1440), DP black UK

    I went to very difficult to leave my boyfriend to buy this pc.  First of all, that we now live in different countries.  I live in the United States and he lives in England.  We met on a PS3 game online called DUST 514 and played a lot of pc games together as well.  It is difficult to have to steal it back, but we're getting married soon and I'll come to England.  He needs a new PC for years and was jealous of my Alienware Aurora R4. So I decided to buy one that is still better than mine since it's even greater player I am . This will also allow us to play more games together .

    Then I he wired the money and thought that everything would be ok, but you wouldn't believe the amount of screw - rises, that Dell threw on him!  They had even cancel a bunch of commands of the peoples, b/c, trying to control his spec-ed on Alienware has revealed a major screw-up affecting many clients... (Sorry, it made me delete/modify-this until his order passes through.  Dell representatives were concerned about what happened past.  I don't know if they told people that they had to cancel the real reason why orders and the possible impact on customers with currently Alienware Aurora...  I'll tell you what they have done after that his order is finally through.  Just a hint... inside your Alienware Aurora, check if you own to make sure that everything you ordered is actually there...)  He tried to do this for a week now...  I thought Dell was a little better than that... I knew they had bad grades, but really?...  In any case, it is a complete system stressed mess of it all back and on phone calls and e-mails with different people of Dell.  So I thought that, if it still manages to get the Alienware, maybe I can do even better!

    He really should have an SSD, so I'll get a. He was talking and drool on the maps of Titan, so I'll give him two EVGA NVIDIA GeForce GTX TITAN Superclocked 6 GB GDDR5 2DVI/HDMI/DisplayPort PCI - Express cards in SLI config! : http://pcpartpicker.com/part/evga-video-card-06gp42791kr

    I've never built a pc or tinkered with all hardware.  I want to make this even more impressive pc by adding an SSD.  I think I can install an SSD without any problem (I want the Samsung 849 EVO Mz-7TE1T0BW 2.5 "1 TB SSD)... Oops... I just thought of something... 4 TB SATA is actually 4 2 TB SATAs, put in place with 2 as the mirror...  I think that there are only 4 connectors for extension for SSD/HDD... Is this correct?  I have to replace one of the SATAs 2 TB with the 1 TB SSD?  What configuration I would define then the three SATAs 2 TB?  Would it be to say that he would have only 1 TB SATA? Could I set up so that it has SATA 1.5 TB (with SATAs split with half active and part of the half of the mirror for a RAID configuration)?  Furthermore, I have really no idea what RAID is or fact, just that you only half of total storage really active and the second half is as a backup in case of failure of a disk or something to avoid any data loss total... It is also the thing that I'm confused about that I don't know if it is also possible to install two graphics cards of Titan in SLI configuration on the micro ATX motherboard, I guess its Alienware Aurora will be, and still less 1 Titan.  Yes I know it is exaggeration lol, but the game is very important for us, especially since this is how we met.

    Sorry for the long post... Finally, the MAIN POINT & QUESTION:

    I have to install a different motherboard like the Asus Rampage Black Edition IV: http://pcpartpicker.com/part/asus-motherboard-rampageivblackedition in order to install two Titan GPU in SLI configuration?  If so, how this O_o...?  Also, I heard that there is a 'girl' Council that controls the Alien FX LED lighting and ventilation Active... How to connect to the new motherboard (if I need to get a new one)?  Also if I get the other motherboard (if this motherboard work with everything) this motherboard would have space for 4 x 2 TB RAID 1 + 0 and the 1 TB SSD SATAs?

    Please answer.  Thanks, ~ value

    Setsuka
    to install two Titan GPU in SLI configuration?

    Don't know why you config-ed with two years 780 in SLI if you want two Titan-SLI but this guy did:

    http://en.community.Dell.com/Owners-Club/Alienware/f/3746/p/19512935/20402844.aspx#20402844

    Personally, I'd keep just 780 - SLI, since the two configs end up being very similar to the performance. Either they're going run hot (in the game of max.).

Maybe you are looking for