Need drivers all in one HP PSC 1610v scanning and printing under OS 10.8.5

Similar Questions

• PRI all-in-one HP Deskjet 3520: Deskjet 3520 printer all-in-one copy, but will scan and print computer

  This printer has always worked well... used only occasionally. The cartridges are fine.  Everything prints out fine computer, it scans very well, but does not copy.  Looks like it's copy, but shot out a blank page.

  Welcome to the HP community @273frustrated,.

  I understand that your 3520 Deskjet is no copy making more correctly however, you can print and scan without a problem. I will do my best to help! I might be far away but I suspect that there could be a problem with the printhead and it printing black ink. I say this because when you print from your computer, normally the ink colors mix to create a composite black, and when you print copies, it's only the black ink cartridge that is used.

  I want you to try a power reset and make sure that the printer is plugged directly into the wall, avoiding bars power and surge protectors. This ensures that the printer is full on.

  Turn on the printer.
  With the printer, unplug the power cord at the back of the unit.
  Unplug the power cord from the wall outlet.
  Wait at least 15 seconds.
  Plug the power cord into the wall outlet.
  Reconnect the power cord to the back of the unit.
  If the printer does not by itself, press the Power button to turn it on.

  Please also try the procedure described in this guide and get back to me with the results when you're done and I hope that we can reach a resolution!

  Testify of my answer by hitting the thumbs up below and press the button "accept as Solution" if I have you helped a resolution!

  I hope this helps you!

  • Printer prints a blank Page or doesn't print black or color ink for the series of e-all-in-one-HP Deskjet Ink Advantage and Deskjet 3520 printer

• Printer send error reports all-in-one HP PSC 2355 'remove and check color cartridge '.

  When sending of works for the all-in-one printer HP PSC 2355 of my laptop Acer Aspire with Windows XP and a USB connecton,

  I get an error message on the screen flip to say remove and check color cartridge. I do this, but nothing has changed and now the switch does not work either as a result I can't do anything, it's just frozen.

  If anyone can help I would be very gratefull, but please remember that I am a complete novice with these things.

  Thank you

  daisy70

  Hello daisy70,

  Because the printer is frozen we will start by doing a reset of the printer. Instructions available via this link and posted directly below as well.

  Reset the printer

  Follow these steps to perform a reset of the product.

• psc2170 HP printer all in one... newly installed and printer works, but cannot scan.

  I use a laptop Toshiba Windos vista.  A friend gave me the HP all-in-one and the software has been installed immediately when I plugged it.  However, there is no icon on the desktop or HP Director.  When I press the scan button it says "without exploring op."   How to the the HP Director so that I can use the other functions?

  Take a look at this link that explains your options of scan to the 2170.

• OfficeJet 7310 all-in-One: activate the Web Services and printing of Tablet

  I can't find a way to enable Web Services on my 7310 all-in-One.  It is connected by wire to my internet router, and I use the built-in print server.  ePrint online information, says this printer is supported.  When I go into the ePrintCenter registration page, or when I go into the app on my Android tablet, it won't give me an option to manually enter the printer and can't find the printer on my home network.  All this suggests that I should update the firmware of the print server, but I can't find a way to do it.  Any help would be welcome.

  Ok. I found my own solution, but the documentation is really bad.

  The answer is: If you select document, it gives you the choice of the printer on the wireless network, even when not compatible eprint. But who knows? I would have thought to implement a printer first.

• HP OfficeJet Pro 8610 all-in-o: HP OfficeJet Pro 8610 All in One has serious problems wireless and print queue

  I had nothing else problems since buying this printer 2 months ago.  We have a router from Apple and Apple OSX El Capitan computers running.

  Wireless problem: the printer continuously indicates he is not connected to wifi, and the wifi worked very well. I followed the guide to troubleshooting well too many times now.  I have to turn off the printer and unplug the power cable so he can reconnect, and then it stays connected for 1 to 2 minutes.

  Print line probem: when I get the connected printer jobs hanging up in the queue and almost never print.  If they print, it may take 10 minutes before the first page prints.  Yet once, I followed all the troubleshooting steps.

  I also reset the printer to the factory settings and uninstalled the SW on our computers, then reinstalled.  The same problems remain.

  I never had such problems with any device.  I hope someone has a magic answer.  Yet once, I tried the troubleshooting of all HP articles. they have not helped.

  Since the 8610 is near your router, you can connect a cable between the two ethernet?

  For the static IP address, take a look at the #3 solution in this link.

• PSC 1210 all-in-one: hp psc 1210 order copy but scan and print

  Until recently the copied PSC 1210, scanned and printed.  It copies is no longer in black & white, or rather when I press the copy button, the scanning starts and the printer prints a blank page.  Without moving anything, I can scan the document (Windows Fax and Scan) and print it using the same PSC 1210 and it prints perfectly.  A color copy prints a few characters in blue/green.  No recent change in hardware or software (other than the Microsoft updates).

  Hi @will-not-copy,.

  Maybe the problem is related to the ink, especially the black ink. If I understand your description that you can scan and print again, but you are unable to copy. Copying and scanning use the same hardware components so ideally if we work so should the other. Copy and print using the same ink system so if you can print, you should be able to copy; However, the impression of the computer may produce a composite black, which means that the colors combine to make black, when copying the printer can pull out the black cartridge to produce black. That's what I mean when I say that the problem might have something to do with the he black cartridge.

  I would like to print a self-test report to see if the printer hardware can produce black ink in stand-alone mode. To print a report, use the following steps:

  1. Load the plain, white paper into the paper tray.

• I need all in one hp psc 2353 driver

  I need all in one hp psc 2353 driver

  Accept as Solution

• Example: Pavilion dv6: printer all-in-one HP PSC 2110

  I, m trying to install the printer all in one HP PSC 2110 on windows 7. Annyone has a compatible driver for this OS.

  Hi @eok001,

  Welcome to the HP Forums!

  I noticed you're wondering if there is a driver available for your printer HP PSC 2110 running on Windows 7. I'm happy to take a look for you!

  A complete printer driver of functionality for one or more versions of Windows is not available for your printer, or from the CD supplied with your printer from the HP website. To use your HP printer with a Windows computer, you must install the driver built-in. To do this, please take a look through this guide, installation of your printer using the built-in Windows driver. Otherwise, I suggest upgrading to a printer of software complete features and drivers available for Windows 7. Here, a list of printers that are compatible with Windows 7.

  I hope this information helps and thank you for posting!

  "Please click the Thumbs up icon below to thank me for having responded."

• Problems to install my printer all in one HP PSC 1350 to Yosemite mac 10.10.2

  I can't seem to install my printer all in one HP PSC 1350 Yosemite 10.10.2 Mac

  Choose my printer in the window 'Add' and 'Add' is disabled, and I get a message saying something like "there is not any software avaible for this printer." "Get in touch with the manufacturer of. But I can see this list,

  http://support.HP.com/us-en/document/c04473034

  so, I know it's true, the software he's somewhere.

  Help please.

  Thank you very much

  Hi @Nattaka

  I can help you use your PSC 1350 with your Mac running Yosemite.

  Please first reboot the Mac and printer, then download and install the HP printer drivers.

  You can now go ahead and add the printer. Please let me know if that fixes the problem, thanks.

• enabling fi /wi all-in-one HP psc 1350

  I have a printer all-in-one hp psc 1350. My office is a dinosaur and will not deal with broadband internet. Now, I use an Apple iPad WiFi Tablet and do not want to buy another printer. Is there a way to make my printer work on a wi - fi with my Tablet via my router without a desktop computer. I tried hanging upwards according to the instructions off eHow but it my tablet can ' t find it. Do I need a driver or something else to make it work, or is it still possible. Thanks for any help anyone can give me. LEARNIN'.

  Hello

  You'll need a printer AirPrint enabled to print directly from an iPad or a network printer to print from HP ePrint mobile app.

  I'm afraid the PSC 1350 is a single USB printer, it doesn't support printing from a mobile device like the iPad.

  You can find a list of printers supported for iOS devices in the following document:

  http://support.HP.com/us-en/document/c03722645

  Shlomi

• Printer all in one HP PSC 2175v prints the page number and the title of the document

  Printer all in one HP PSC 2175v prints the page number and the title of the document.

  This is the default value?  Can I disable this?  I would prefer to print only the document, without page numbers and the title.

  I was printing of either Wordpad specifications, using Windows XP.

  Using the front panel of the printer, I loaded the defaults of the printer, and that fixed the problem.

  Thank you

• All-in-One copy vs functions Scan

  What is the technical difference between the black copy function and the function of scan (Document to the printer setting) in HP-each when you print a black and white document?  Sometimes I have a HP Photosmart C6280 but imagine a similar software is used in most HP AIOs.  I use Windows XP SP3.

  I noticed that get copies of the printed large document when you use the black copy.  We see no difference between the original and printed copy.  But when I take the same document and use the scan function, the default setting of "Document to the printer" in the HP Solution Center / HP scanning software, white background of the document comes out of gray in the scanned image and the printed document.  Tweak the parameters of scanning doesn't seem to help.  The default color is 'levels of gray.  Change the color to "black and white" setting worse image, even after the threshold adjustment.  This is also true when scanning to a file.

  Curiously, Scanner of Windows XP and the Assistant camera produces images of a document scanned (no gray background) when you use the parameter "black and white picture or text.

  It seems that two different sets of software are used by HP for scanning and copying, even if the two functions use the same scanner. Would be nice if HP Scanning can be configured to produce the same document, black and white, scanning of the results produced by the black and the scanner and Camera Wizard copy function.  Did I miss something on the purpose or the configuration of the scan function? Did you have a good black and white, scanning of the success with the HP Solution Center / HP Scanning?

  Thanks for ideas or experiences!

  Mark

  I solved my problem with the help of HP technical support.  HP has a document entitled "Improvement of Scan quality," located at http://support.hp.com/us-en/document/buu00673

  It is found by typing "Improvement of the quality Scan" in the search box on the HP support & drivers page.  The document is the first result in the list.

  The second task of the document suggests recalibrate the all-in-one.  It was easy to make and done to correct my problem to get gray backgrounds on text scanned documents using the color to grayscale setting. The backgrounds are now in white, as it should.

  The lesson I have remove this: always turn the all-in-one front to put the document to scan on the glass.

  When you unplug the all-in-one to the power outlet and then plug it in again, the scanner to recalibrate automatically itself when it is turned on again with the power button.  If there is a document on the glass during calibration, recalibration may not work correctly, but you will not know.  All you know is that the scans you then will have quality problems!

• Could you give me a price list of the HP all in one printers we have to buy printer all-in-one?

  Could you give me a price list of the HP all in one printers we have to buy printer all-in-one?

  @ mehtaintertrade - site HP home and home office can help too. It can show you the price you can pay online and see the you the specifications of different printers and the features that are available so that you can compare them and get an idea of what all-in-one printer is right for you and will be able to better meet your needs. I put this link to open the Printers page where it shows a Photosmart and an Officejet all-in-one that are among the Favorites of customers. You can click on see details and which brings to the page for the printer and look at an overview, specifications and comments for the printer. This might be able to help make a decision that you are comfortable with. I hope this helps.

• ALL-IN-ONE PHOTOSMART HP 5510 WILL NOT PRINT AFTER GO 'SLEEP' MODE

  My printer model:

  HP PHOTOSMART ALL-IN-ONE 5510 B111A

  Problem:

  Printer goes into sleep mode. After 25-30 minutes breaks the connection between the PC and the printer wireless. Beacon wireless is the same fashionable "sleep" and I see that the printer is connected to my router and there is internet connection. HP Print and Scan doctor sees the printer, but I can't wake the printer unless I restart it.

  What I've tried so far:

  I tried all the solutions offered hp.com; Reinstall driver, updating the printer software, setting static IP on the printer, static DNS servers, using HP print and Scan doctor.

  I've seen people questioned on this issue before and there is no solution. I really need help from HP!

  After days of research, the problem was finally solved! I applied the following steps below. Some steps may be unnecessary, I didn't waste my time knowing who.

  1. find your PC's DNS servers by typing ipconfig/all in CMD.
  2. assign a static IP address outside your DHCP range. For my Linksys router him between 192.168.1.100 to 192.168.1.150. So I put my static IP address as 192.168.1.20.

  To do this, click the button on your printer wireless. This will show the IP address of your printer. This type of your browser. Go/network/network address. Choose manual IP and write 192.168.1.20

  3 now come to section of the manual DNS server, and then type your DNS servers, you found before.

  4. open your HP printer program that must be installed with your driver. Utilities hit and update the IP address. Update your address with your static IP address.

  5. now go to your router settings. Find the wireless settings and change your not automatic standard 20 MHz radio band.

  6. change your standard channel to 6.

  7 find the wireless security and replace your WPA-personal security mode.

  8 disable UPnP

  9. This is the part of the KEY. Change the renewal of your key to 36000 seconds. (10 hours)

  10 go to the Windows Advanced Firewall. Enable all the disabled printer and share, entrants and outbond rules.
  I believe that the most important parts are affecting a static IP address outside your DHCP-range and change the key renewal time. I hope this works for you too