Need drivers for USB 2.0 Port Replicator

Similar Questions

• Satellite Pro A120 and WXP - need drivers for USB and SD slot

  Hi guys,.

  I have a Satellite PRO A120 PSAC1E XP, I need to find the drivers for the USB port and SD memory card port.
  After reinstalling the operating system won't work.

  For USB, you need to install driver chipset and SD card, you must install SD Secure module and later the two SD utilities.
  Please download the Instructions of facilities and install all the stuff following this order of installations.

  If you have, so nothing can be wrong.

• HP 3005pr USB 3.0 Port replica: software for USB 3.0 Port Replicator

  Hello!

  CAN´t find the software for 3005pr 3.0 HP Port Replicator Port HP support.

  Hello

  If the device has win 10 OS:

  Please find the driver below:

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5387722 & swItemId = ob_165439_1 & swEnvOid = 4192

  Check the drivers for the device that you are trying to connect:

  http://h20564.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=5387722 & swLangOid = 8 & swEnvOid = 4192

  I hope it helps

  I am an employee of HP

  Please click on 'Accept as Solution' on the post that solves your problem to help others find a solution even.
  Click the 'Thumbs Up' to say 'Thank you' for helping!

• drivers for USB to serial port cable

  I am trying to install drivers for a USB cable to serial port on a HP Pavilion dv7 laptop (Windows 7) - I go through the download and when I plug the cable of the toolbar displays a sequence of installation but then an error of installation failed. I tried all sorts of updates and Windows says that it cannot verify the signature of the device.

  Would have been nice to know exactly what you had already tried :-)

  I do not know what adapter you are using, but I have a Trendnet TU-S9 that I use to connect my OBDII code reader to my PC, so I can save the CEL errors that I receive on different vehicles. I thought I had the drivers for it installed, but I have not (could not even find on a HARD drive). But I plugged it in just to see what happened. The message was that no local driver could be found, I wanted to try Windows Update? I said yes, and installed a "Prolific USB - to - Serial Comm Port (COM3)". Plugged the code reader, started the PC-Link software and here!, everything was good.

  You could try to uninstall anything that you have already installed, restart, then connect the adapter and see if you have the same success. I use Win7 HP x 86, but Vista should at least try to do the same thing, and who knows, it might work :-)

  SC Tom

• Hi speed USB via a Port Replicator advanced for a Tecra 9100?

  I have the same problem with a Tecra 9100 and upgrade to hi speed USB as a previous post where the proposed solution was to use a PCMCIA card.

  (see link: http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=24103)

  I had an idea, but I don't know if it will work and need some advice?

  Can you buy an Advanced Port Replicator that has Hi Speed USB 2.0 ports on it (like the PA3082U APR II that works with the Tecra 9100) instead of the PCMCIA card.

  If the docks of Port Replicator in the motherboard will it give you Hi Speed USB 2.0, or is the Tecra 9100 forced to USB 1.1 via hardware in the laptop itself and the Replicator will not help?

  Also if I go down the road of Port Replicator I need drivers for speed ports Hi of the Replicator to work on the Tecra 9100?

  Or to ask the question – what is the PCMIA USB 2.0 card in that advanced with HI Port Replicator speeed USB is not?

  Thanks in advance

  Hello

  the Tecra 9100 has NO usb 2.0 and it's a fact. Given that the Replicator has these USB ports 2.0 does not mean that your machine when it is docked to the Portrep, is able to manage USB 2.0 devices. The portrep, it's like a usb hub and behaves like. So if your machine doesn´t have it then that's it.

  And the explanation on the PCMCIA/Cardbus solution:
  The pcmcia card USB 2.0 Chipset, this is the reason why it IS a USB 2.0 device (roothub).

  I hope this was clear to you :)

  Just buy this card and you will have USB 2.0

  Welcome them

• Toshiba PX1173E - 1PRP USB 2.0 Port Replicator II windows 7 drivers

  Hello, I can, t find windows7x64 drivers for my Toshiba PX1173E - 1PRP USB 2.0 Port Replicator II. I find the driver for win vistax32, but it's not work.

  Hi Michel,.

  The point is that 32-bit drivers will not work on a 64 bit OS and you can get all the drivers on the Toshiba page:
  http://EU.computers.Toshiba-Europe.com

  But it seems that there is no 64-bit available driver and you can use t Port Replicator II with 64-bit so far :(
  Maybe Toshiba going 64-bit in the near future

• Pavilion 17-g113dx: Data Acquisition USB and PCI need drivers for HP 17-g113dx

  The operating system is increased from 10 Windows to Windows 7. Struggling to find the right drivers for USB ports

  Hardware ID:

  PCI | VEN_8086 & DEV_1603 & SUBSYS_8094103C & REV_09

  PCI | VEN_8086 & DEV_1603 & SUBSYS_8094103C

  PCI | VEN_8086 & DEV_1603 & CC118000

  PCI | VEN_8086 & DEV_1603 & CC1180

  Hello:

  You need these drivers...

  PCI | VEN_8086 & DEV_1603:

  This package contains the driver which allows Intel platform dynamic and thermal firmware setting. Intel platform dynamic and thermal environment information system temperature and power use for the thermal protection of the system to work properly. This package is provided for the laptop models running a supported operating system.

  File name: sp71185.exe

  USB3: Download, unzip and run the setup.exe file on the left side of the Web page.

  https://Downloadcenter.Intel.com/download/22824/USB-3-0-driver-Intel-USB-3-0-Extensible-host-controller-driver-for-Intel-8-9-100-series-and-C220-C610-chipset-family

• I need drivers for Fresco Logic USB 3.0 Root Hub on Asus 53 SN Win8 Pro.

  After a reinstall of Win 8, Manager of devices shows a driver missing for Fresco Logic hub USB 3.0. The series of Fresco Logic FL1000 Controller seems to work fine.

  The hardware ID is FLUSB\ROOT_HUB_FL30
  Prior to the relocation, there is no problem, but it took a while to find all the drivers after the upgrade of Win8 of Win7. But I can't remember how I had solved the problem right there. There is no drivers for Asus.
  If anyone has solved a similar problem would offer a way, I would appreciate it a lot.

  Hello

  I understand that you need drivers for Fresco Logic USB 3.0 Root Hub for laptop running Windows 8.

  I suggest you to download and install the drivers from the link.

  http://support.ASUS.com/download.aspx?SLanguage=en&p=3&s=271&m=N53SN&OS=30&ft=22&F_NAME=USB_Fresco_Win7_64_Z301163.zip#USB_Fresco_Win7_64_Z301163.zip

  Given that Windows 8 compatible version of the drivers is not available, I suggest you to download Windows 7 compatible drivers from the link and install it in Windows 7 compatibility mode.

  See the link given below to install the drivers in compatibility mode.

  Make the programs more compatible with this version of Windows

  http://Windows.Microsoft.com/en-in/Windows-8/older-programs-compatible-version-Windows

  I hope the information helps to find the drivers for Fresco Logic hub USB 3.0 root, if you have requests or questions about Windows, feel free to post. We will be happy to help you.

• Tecra S5 - slow ethernet with USB 2.0 Port Replicator

  Hello

  I have a Tecra S5 with USB 2.0 Port replicator II. I have 3 ethernet connections all together on my PC: LAN on motherboard, WiFi and the other on the USB port replicator.

  At home, I use WiFi for internet connection and USB to Ethernet to a wired connection to devices with built-in web server.

  My problem is that when the WiFi and USB to Etherenet is active the internet and the connection to the web server works but vey slow.
  If I turn off the WiFi and connect to the web server works properly.
  If I disable USB for Ethernet internet connection works correctly.

  Anyone has same problem and suggestion how to solve?
  I downloaded the latest drivers from the Toshiba support page.
  My OS is XPSP2.

  Concerning
  jballa

  Hello!

  It looks like a network configuration problem. Check the network addresses and configuration in command line with the command ipconfig/all.

  Try using static IP addresses. I think that the DHCP server takes a long time to go send an IP address to each laptop.

  Good bye

• Satellite Pro M70: What USB 2.0 Port Replicator is compatible?

  Would be grateful if someone could advise me on the purchase of a USB 2.0 port replicator.

  I think the 3 USB 2.0 ports on my laptop Pro M70 are not enough, and that's why I want to buy a USB 2.0 Port Replicator.

  The site of the Toshiba shop specifies USB 2.0 Port Replicator II (UK) with port network, part number: PX1173U-1PRP, price: 49,93 GBP.

  It has 4 USB ports 2.0, which would give me a total of 6 USB 2.0 ports, which would be the absolute minimum I want. (It also has 2 PS/2 ports, 1 serial port RS232 and 1 USB 2.0 port network that takes in charge rates of 10 / 100 Mbps).

  Can anyone tell if it is powered by the laptop, or by it's own adapter?

  Unfortunately, the Web of Toshiba site has advised that it is currently out of stock and are difficult to get in on all the time, as they are the subject of a sort of "green manufacturing" test.

  This prompted me to consider buying a replicator USB 2.0 ports alternative and all I would prefer one with more than 4 USB 2.0 ports, and in fact 6 or more USB 2.0 ports would be preferable. I'm not really interested in other types of ports that are often provided with the replicators of USB 2.0 ports.

  I would be grateful if someone could recommend/Advisor at a replicator USB 2.0 ports alternative that would be compatible with my laptop Pro M70.

  One of my concerns is how the port replicator USB 2.0 Port is powered. I think I would have preferred that the unit is powered by its own adapter, I understand is 5 Volts with 500 milliamps for each port, rather than to the laptop (probably would be less tax on the laptop, with less heating).

  Thank you
  AlanCB

  I can't comment on the question whether the Replicator you mention has its own power source, although I suspect, he does

  However, I have a satellite Pro M70 too and with a similar problem and wanting a hub to connect to all my external printers, Sandy etc using just one connection, I buy PA3390E-1MPM - a hub of Toshiba, Audio/USB multimedia center, which goes a step further and provides a hub not only for USB sources , but also for the speakers etc.

  It has its own power supply to the unit and connects via USB 2.0 to my laptop. It is also stackable with the Toshiba Gigastore 250 GB USB 2.0 external hard drive (PA3392E-1MPS) which I also use for backups, storing external data etc.

  Had the two units for 3 months now and everything works fine. I got headr of some problems with people in loss of access to the hard drive, but it seems that it was never if it has been disconnected by pulling the cord out usb, rather than make a ' Safely Remove Hardware to disconnect the USB device and so far have had no probs at all

  It has 4 ports, more port network and connections from the speakers for the configurations 2/2.1/4/4.1/5.1 full, more Creative software like drivers, more remote control useful to control audio devices. Oh, and also a Surround sound, and EAX

  Maybe a little more of your option, but worth it in my opinion. If you can't find it on the Toshiba site I have purchased from www.insight.com

  Hope that helps
  Steve

• LT2323z - connect to the USB 3.0 Port Replicator

  I just bought the LT2323z monitor to go with a X carbon 1 and connect via the USB 3.0 port replicator.
  However the LT2323z has displayport digital connections and the DVI-d port replicator. Any ideas how to connect to their place? Here are the flagship of Lenovo products, bought directly with Lenovo, but they do not seem to be compatible. I'm missing something until I send them all back for my money!

  The LT2323z, take the VGA connection, which takes care of your USB docking station 3.0 with the adapter DVI to VGA, which is included in the box. But the quality of the video connection is not terrible.

  There is no solution from docking station USB supported displayport. If you need to connect to the screen, you must use a direct miniDP to DP cable connector (which is unfortunate).

• Need drivers for the SATA hard/controller on the dv7-6c95dx disc.

  Need drivers for the SATA hard/controller on the dv7-6c95dx disc.

  We load Windows 7 Enterprise on these newly purchased laptops, but do it have not the required appropriate drivers detect the hard drive on them. Impossible to find on the HP website.

  You can refer to a completely different question here, Marty. I was installing to a flash drive and it turns out that my install media has been connected to ports USB 3.0 on the left rather than right 2.0 ports. Moving to the ancient ports of 2.0 has solved my problem. Good luck.

• Need drivers for Satellite 1000-Z2

  I have a Satellite S1000-Z2 (aka PS100E-001RE-EN) - number of complete product C1133/256/15/14XT/D/M

  I don't have the original CD that came with the laptop, and I had to replace the hard drive. I loaded a version OEM of Windows XP by using the key number on the bottom of the laptop, and which has been loaded OK.

  However, there are 3 devices I need drivers for the modem and 2 graphics drivers (Intel I think). I can't find THE drivers on the Toshiba site.

  In addition, there is a port of network at the rear of the machine. It does not show in the Device Manager to all, and I don't find it in BIOS to see if it is enabled or disabled.

  If anyone can offer any assistance, I would be very grateful.

  Thank you.

  All the drivers, that you can find in the ARCHIVES. Check it out!

• Need drivers for Satellite M115-s3094

  Hello

  I have a Satellite M115-s3094, I had problems with my OS which was Windows XP MCE, but I couldn't fix it. So I got fed up and loaded in windows XP Professional, but a lot of my drivers are gone.

  I need drivers for Ethernet controller network controller, PCI device, flash memory, USB controller, SM bus controller, video controller... plus I have no sound. It is an Intel centrino duo... as you can see miss me a lot of pilots.

  Could someone tell me how can I find out what kind of driver I need and where do you get them from? Win XP SP2 installation would install one of these drivers?

  Any help at all would be much appreciated...

  Thank you all...

  I have the same problem. I just need the drivers for the Ethernet controller and a PCI device. I guess that the PCI device is the wireless card.
  I tried all the drivers on the Toshiba site, but none seems not to work.

  Please help us.

• Need software for USB driver for JVC digital camcorder model GR-No.-D870AS with window xp

  Need software for USB driver for JVC digital camcorder model GR-No.-D870AS with window xp

  Hello

  I suggest to see the link and install the drivers and check.

  http://www3.jvckenwood.com/English/download/index.html

  I also suggest you contact the manufacture of the product and check.

  http://www3.jvckenwood.com/English/support/index.html