Need expert help! CD player does not read the contents of the disc. Help!

Similar Questions

• CD player does not read the CD ROM and CD music, DVD works fine

  My HL-DT-ST DVDRAM GSA-H42N DVD and CD player does not read the CD ROM and CD music, DVD works fine

  Hi Anil,

  We recommend that you download and run the Microsoft Fix and check if the problem persists.
  See your CD drive or DVD drive is missing or is not recognized by Windows or other programs

  See also: http://support.microsoft.com/kb/321641

  Visit our Microsoft answers feedback Forum and let us know what you think.

• CD player does not read the CD

  Original title: Windows Installer 4.5 on a computer laptop gateway running windows7

  I tried several things with windows install 4.5. I even tried sfc/scannow, and who came back under the name of no violation. The only thing I have not tried is the clean utility windows, that will help? Who's going to make me lose all my photos and music and information stored in the school's computer? The reason why I am trying to solve this problem is because the Player reads any of my software cd HP, Polaroid and Microsoft2010?  someone please advise

  Hi fredibar,

  1 are. What utilities you referring?
  2. what exactly is the problem with Windows install?

  As the CD/DVD drive does not read the CD, we need troubleshoot CD player. We do not think that Windows Installer is related to the CD player.

  To fix the CD/DVD read the issue, try the following steps:
  a. see your CD or DVD drive cannot read or write media
  b. click Run Now button and run the tool successfully.
  c. restart the computer and check if the CD is read by the CD/DVD drive.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• CD player does not read the series Satellite A recovery CD

  Hello

  I have a laptop my father gave to me and I need to restore it before using it for me because it works very slowly.
  I have the restore cd but I have problems with the cd player.
  It does not read some CDs, but it will not read the cd recovery so its as if it is not there.

  Is it possible to restore it without the cd? I'm not very super-friendly up with computers, so please simplify if possible.

  Any help would be appreciated.

  Thank you

  Claire.

  You can try to boot from the original CD of Microsoft Windows.
  Check if this CD is readable.

  Then you can download the drivers from Toshiba from the European driver Toshiba page and could install the drivers

  A few words about the CD drive problem, it seems that the goal of readers can calibrate in the right position and therefore some CD or DVD is not readable
  In most cases, the CD/DVD drive should be replaced to solve these problems

  See you soon

• Droid X 2: doubleTwist player does not read the SD card

  (And NO, I'm not talking Desktop App... the app works great and sync to sdcard_ext very well.)

  Someone else had this problem? He is the only player who does not see the SD card. I'm trying to convince developers to doubleTwist, that's THEIR problem. They have so many users pass through hoops to describe their problem and give them details without actually solving the problem. It is approximately 7 months since the first issue has been reported to them. And of course, most of the users are deserting a ship and ask for refunds.

  Any thoughts?

  There is something about the fact, however - after using about a dozen media players, that's really one of the only media players I found the sdcard_ext problem. I went to PowerAMP and I love it.

• MY CD/DVD DRIVE DOES NOT READ THE DISC READABLE

  MY CD/DVD DRIVE DOES NOT READ ANY READABLE DISK ALL OF A SUDDEN.

  I DON'T KNOW WHAT IT IS.

  I CAN HEAR THE COMPUTER TRYING TO READ BUT IT ME SAID JUST THAT HE HAS NO DISC INSERTED OR THAT THE DISC IS BLANK WHEN ITS CLEARLY NOT.

  IT would NOT be RETURNING to PLAY AUDIO CD IN iTUNES or WINDOWS MEDIA PLAYER.

  HELP PLZ

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then check the cables
  both ends. Remove and replace, do not just tight. For laptops, you can often clean power
  and contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the system manufacturer
  and the manufacturer of the device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and the
  correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• computer does not read the disc

  my computer used to read any disk and was able to burn CDs now it reads only DVDs. How can I fix

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then check the cables
  both ends. Remove and replace, do not just tight. For laptops, you can often clean power
  and contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the system manufacturer
  and the manufacturer of the device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD &)
  Burn DVDs and CDs and read DVDs). So it is not unusual for 1 or 2 operational parts while
  others do it properly.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates
  and the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry settings for your
  CD/DVD drive someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• QuickTime Player does not read the sub file.

  I tried to watch a movie with subtitles using a randomly video player, but I'm having some problems now. So I tried to use QuickTime Player to my surprise, there was no possible way to do it, but to burn the subs in the movie file. How is it that such expensive equipment does not have a video player that can actually read subs?

  Please, take a look at this, I think that we should not have to download another video player to do this.

  QuickTime Player 10.x: discovers the movie subtitles

• Equium A60 - DVD player does not read the data disks

  Hello

  I'm having a problem with my DVD drive on my laptop Toshiba Equium A60. The DVD drive (Pioneer DVD - RW DVR-K13A) will play store bought movies etc. without problem. He will also read a blank DVD when you put it in the drive, but once the information/data are on the disc, it won t detect the drive.

  I'm not really good with computer so any help would be grateful. The computer used for any play he stopped just do a few months back.

  Many thanks, Phil

  Hello Phil

  It is not easy to find explanations for these issues. What you can try is to create own data CD and check if the drive can read. I recommend buying a blank DVD-R from TDK. Over the past 7 years I never had no problem read/write TDK media.

  Media that cannot be read properly? Is - this DVD-R, DVD - RW, DVD + R or a DVD + RW?
  Please give us more information.

• DVD player will not read the discs more after burn fail

  Something strange happen to my DVD player. I tried to burn a blank DVD but it failed without any error message: the DVD has not been recognized. Since then the DVD player will not only read one of my other burned DVD that I need for my daily work. Can anyone help?

  DVD players are not particularly robust, especially designed patterns for portability. It may have burned his laser for DVD work.

• CD/DVR Player does not read the executable files on some CDs.

  It reads files on the CD, but not an executable file. I have two computers identicle, so I can check the CD on the other to see if it works. Some CD will start auto and others do not - and when I try to search the CD thanks to explore, there are only available data files & text. Example: new Canon printer installation software not start.with game automatic or manual, since there is no file to run. The same CD works on my other machine. I replaced the CD/DVR Player with a new and got the same results. Reinstall the driver didn't work, makes me think that something in Windows is enabled or disabled causing this problem, but I don't know what it could be. I have autoplay on, and it used to work fine until recently. Help! A final clue: he's going to play the CD in Safe Mode?

  Hello

  Check your antivirus/security program. The just maybe not clear enough as is
  always load chunks of itself into memory. So uninstall it and run its creator for removal tool
  avoid problems causing scraps left. Here are the recommendations to
  use during the test and even permanently.

  List of tools to clean/uninstall anti-malware programs
  http://social.answers.Microsoft.com/forums/en-us/msestart/thread/407bf6da-C05D-4546-8788-0aa4c25a1f91/

  Here's what I use and recommend: (these are all free and very effective versions.)

  Avast and Prevx proved extremely reliable and compatible with all I have
  launched on them. Microsoft Security Essentials and Prevx have also proven to be very
  reliable and compatible. Use MSE or Avast and Prevx, Prevx 3 but not all.

  Avast Home free - stop any shields is not necessary except leaving Standard, Web, and
  Operation of the network.

  Prevx - Home - free

  Windows Firewall

  Windows Defender (is not necessary if you use MSE)

  Protected IE - mode

  IE 8 - SmartScreen filter WE (IE 7 phishing filter)

  I also IE always start with asset if filter InPrivate IE 8.
  (It may temporarily turn off with the little icon to the left of the + bottom
  right of IE)

  Two versions of Avast are available 5.x and 4.8 x

  Avast - home - free - 5.x stop shields you do not use (except files, Web, network, &)
  Shields of behavior) - double click on the icon in the Notification area - real time Orange - click on the
  Shield that you want to stop - STOP. To stop the Orange icon to show an error indicator-
  Click on the Orange icon - top right - settings - click on the status bar - uncheck shields you
  disabled - click OK
  http://www.avast.com/free-antivirus-download

  Avast 4.8 x - home - free - stop shields, you don't need except leaving Standard, Web,.
  and the network running. (Double-click the blue icon - look OK. - upper left - Shields details
  Finish those you don't use).
  http://www.avast.com/free-antivirus-download#TAB4

  Or use Microsoft Security Essentials - free
  http://www.Microsoft.com/Security_Essentials/

  Prevx works well alongside MSE or Avast

  Prevx - home - free small, fast, exceptional protection CLOUD, working with other security
  programs. It is a single scanner, VERY EFFICIENT, if it finds something come back here
  or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  PCmag - Prevx - Editor's choice
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Also get Malwarebytes - free - use as scanner only. If you ever think malware and that
  would be unusual with Avast and occasional Prevx running with the exception of a low level cookie
  (not much), to UPDATE and then run it as a scanner. I have a lot of scanners and they
  never find anything of note that I started to use this configuration.

  http://www.Malwarebytes.org/

  ==========================================================

  Other methods would be to use the clean boot method to see if you can determine whether something
  interfere with the operation of the drive.

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  Autoruns - free - see what programs are configured so that it starts automatically when
  your system boots and you connect. Autoruns also shows you the complete list of the registry
  and where applications can configure Auto-start for the files settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• DVD player does not read the DVD more

  Original title: dvd master model sd 616e

  Hello I have a problem for my dvd do read no more, help

  Hi parapapiche,

  1. Did you the latest changes on the computer?
  2. What happens when you insert a DVD in the drive?

  Refer to the article below and try the steps mentioned, check if it helps.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/982116

• Media Player does not read the dvd.

  When you try to play a dvd, says Media Player cannot find the dvd directory

  FWIW... Win XP cannot natively recognize Commercial
  DVD video... it requires a DVD decoder.

  If you could play before commercial video DVD...
  do a system restore to a time before this started
  may be your solution.

  Or you could buy a DVD decoder at the following link:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Info about DVD decoders:
  Plug-ins for Windows Media Player
  http://Windows.Microsoft.com/en-us/Windows/downloads/Windows-Media-Player/plug-ins

  Or you can download and use one of the following freeware
  media players:

  VLC Media Player
  http://www.filehippo.com/download_vlc/
  (works on XP/Vista/7)

  Media Player Classic Home Cinema
  http://MajorGeeks.com/Media_Player_Classic_Home_Cinema_d6213.html
  (works on XP/Vista/7)

  Or... you can try to download and install "a" of the
  Following codec packs.

  (FWIW... it is always preferable, if you create a system restore
  point before installing any software or updates).

  * Proceed at your own risk *.

  (1) K-Lite Codec Pack (full)
  http://www.filehippo.com/download_klite_codec_pack/
  (Windows 2000 / XP / 2003 / Vista / Windows7 / XP64 / Vista64 / Windows7 64)

  (2) Windows 7 Codec Pack
  http://download.CNET.com/Windows-7-Codec-Pack/3000-13632_4-10965840.html
  (2000/XP/2003/Vista/Server 2008 / 7)

  (3) Media Player Codec Pack
  http://www.mediaplayercodecpack.com/
  (Windows XP - Vista - 7)

  Good luck...

• Hi, I use Adobe Photoshop Lightroom output CC Camera Raw 9.5 2015.5. I am now with Nikon D4s shooting but the lightroom does not read the RAW format. Why? Is it possible to import the RAW files in lightroom? Thank you for your help

  Hi, I use Adobe Photoshop Lightroom output CC Camera Raw 9.5 2015.5. I am now with Nikon D4s shooting but the lightroom does not read the RAW format. Why? Is it possible to import the RAW files in lightroom? Thank you for your help

  I'm not an apple person.  I read on a few different forums that apple has changed what is called 'writing' in a recent update to apple.  You may need to find an Apple expert to show you how to make sure you are allowed to write to files or locations on your computer.

• Tecra M5: DVD player does not read these mini DVD

  I have canon handycam dvd and mini dvd works on it. A month back I recorded the movie and photos on mini dvd with handycam and ran mini dvd on my tecra M5 player, it worked very well.

  Now after 1 month, I have 5 mini DVD with movies and photos that I took for 1 month of vacation country of diffierent, I tried my best but tecra dvd player does not read these mini dvd, label appears instead dvd player cd player when I put the mini dvd in there.

  All the other standard size DVD, CD works good about it. Its complex and as well as irritating.

  Any suggestions?
  Why his messedup?

  Seems that the lens cannot read this miniDVD s. Maybe cannot calibrate the lens of the drive and the miniDVD is so illegible.
  Try the sascha. Maybe you are a lucky man, and it works.
  If this is not the case, try to remove the drive physically from the laptop. Restart the laptop without the drive. The BIOS and Windows shouldn't t recognizes the drive.
  Then stops again, put the drive in the notebook and the startup of the device.
  The laptop should recognize the drive and must indicate the firmware again.

  I don't know if this will help but it s attemptable m