Need for a solution when the Boot Manager is missing.

Similar Questions

• Satellite L750-1LC - Boot Manager is missing by using the recovery disk

  I bought a Toshiba satellite L750-1LC and I try to create the DVD 4 to save.

  On the first dvd that only he came an error reading twice, the other DVDs were ok.
  When I try to recover from the DVD the recovery process got stuck on the first dvd so I had to reboot and try again, but the same thing happened to it.

  After you restart the system it came a message that bootmnager is missing and windows and any other thing was gone.

  Is the promotion of "No. Matter What Guarantee" "covering this type of flaws?
  If so, what are the steps to qualify for this promotion?

  I said that I am a Romanian citizen and I have already implemented for promotion in the specified time interval.

  It seems that the first recovery disk is not created properly because you got an error message.
  As I understand your message, you have tried to boot from the first recovery disc (which was not correctly created in the past) and so the installation could not be completed successfully.

  Now, you cannot start the operating system, because the Boot Manager is missing and possibly the system is deleted also
  I see just one solution: order the new disk recovery from here and use it for the installation of the OS: http://backupmedia.toshiba.eu/landing.aspx

  PS: as far as I know that hardware issues are covered by the warranty, software issues not covered by the warranty

• Boot Manager is missing or damaged in Satellite A100-062, VISTA

  Toshiba Satellite A100-062
  M/N PSAANE-03G00DEN

  When trying to boot the laptop says bootmgr missing and he won t let me to do nothing, just a blank screen.

  I inserted the Vista disc and tried to reinstall but it still says root because the Boot Manager is missing and error code = 0 x 15 on startup repair.

  Can someone help me please and don't forget I'm a novice so will need an idiots guide.

  Thank you very much John

  Hello!

  Have you tried with the disk recovery Toshiba or a disk of Microsoft?
  If you want to reinstall Vista with Microsoft disc, you need SATA drivers.

  I m do not know what is the problem, but in your case, I would like to format the HARD drive. You can do this with the Microsoft disk or with special tools like the Drive Fitness Test (http://www.hitachigst.com/hdd/support/download.htm#DFT).

  Delete all partitions and then do a low level format. Then try again to install Windows.

  Give me a reason why this has happened.

  Good bye

• How do I repair/recharge the Boot Manager for Win XP without the OEM disks?

  I have an IBM Thinkpad G41 with a configuration dual-boot for awhile. I am donating to the laptop at my church and must remove Linux (don't ask) and make XP installed OS only.
  The problem is that I need rebuild/repair Manager start Windows from the installation of Linux successor whit its own boot manager (Grub).
  I have not the disc XP OS then where can I find the Boot Manager or the files that I need to reload/reconstruction.
  XP fills the primary partition on the HARD drive.
  While I can let it load Linux installed it would be useless to anyone and just takes place.

  Thank you.

  Art

  I have an IBM Thinkpad G41 with a configuration dual-boot for awhile. I am donating to the laptop at my church and must remove Linux (don't ask) and make XP installed OS only.
  The problem is that I need rebuild/repair Manager start Windows from the installation of Linux successor whit its own boot manager (Grub).
  I have not the disc XP OS then where can I find the Boot Manager or the files that I need to reload/reconstruction.
  XP fills the primary partition on the HARD drive.
  While I can let it load Linux installed it would be useless to anyone and just takes place.

  Thank you.

  Art

  Download asw. MBR HERE , save it to your desktop. Open the program. Click 'Fix MBR. " Follow the prompts.

• Error when you try to use VoIPBuster to place VoIP calls: Client for VoIP calls has stopped working. Windows is checking for a solution to the problem.

  Client to make VoIP calls

  I recently started having problems, make VoIP calls from my computer.  I use VoIP Busters (and using it for a few years without any problems).  Evertime I try to call the destination phone rings a couple of times and then stop.  The next thing that happens is an error message that says: "Client for VoIP calls has stopped working.  Windows is checking for a solution to the problem.  It is followed by another screen that says: "a problem caused blocking the program working properly."  Windows will close the program and inform you is a solution available. "  Nothing happens.  How to overcome this problem.

  I finally had to resort to the re-installation of Windows.  This solves the problem.  But don't forget to back up your computer and email address / addresses before you do.

• Start the Boot Manager

  Hi all

  I installed Sierra but need to wipe my drive to improve performance and have implemented the installer of macOSSierra on a USB key and necessary to reach the Boot Manager to start the installation.

  I think you hold down the Options/ALT key during restart to get to the Boot Manager, but nothing happens when I do that - it just goes to the login screen. I use a small apple wireless keyboard and wonder if it is active during the early stages of the startup?

  What I am doing wrong?

  Thank you in advance.

  Julian

  When you use a wireless keyboard, you have to wait until after hearing of the Mac startup sound, then press on and hold the option key.

  If you hold down option from the start key, the Mac will not see depression key because the function Bluetooth does not become active until after the initialization of the Mac hardware.

  You can find more details here: Mac OS startup keyboard shortcuts

  Tom

• Boot Manager is missing and the Messages from Stop blue screen.

  Hi Henry here, I lost my Windows Vista disk and I reformatted my hard drive to use my Windows XP. So I ordered a recovery Windows Vista Home Premium SP1 of HP Distribution Center System. When I try to install the recovery system. I get messages from stop and disk boot manager is missing. I have to buy a disc of Windows Vista all over again? or what I can do to fix this? Henry

  How to get Vista recovery Media or the Vista recovery Partition on your computer back to factory settings.

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  Also ask them if it is possible to do the recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/default.aspx/KB/326246

  'How to replace Microsoft software or hardware, order service packs and upgrades, and replace product manuals'

  See you soon.

  Mick Murphy - Microsoft partner

• What components are needed for a deployment of Site Recovery Manager?

  What components are needed for a deployment of Site Recovery Manager?

  Instances of vSphere, vCenter Server and Site Recovery

  Manager are required at the time the protected site and the

  recovery site (this does not imply aspects of license.

  Licenses are covered in a segment later in this document)

  Site Recovery Manager also requires an underlying replication

  product to copy virtual machines on the recovering site.

  Customers have the choice of using either vSphere replication

  or a third-party software based on replication.

  When you use the Bay, a storage-based replication software

  Replication adapter (SRA) is also required.

• Re: Boot Manager is missing on the satellite A210-15Y with W Vista

  Hello world

  I have a serious problem with my laptop Satellite A210-15Y. For two weeks I bought it. Yesterday without warning, I had opened a window to Internet explore and all of a sudden, I got about 20 Windows IExplorer. I stopped it with the Task Manager and then I looked for the update that updates to Windows Vista.

  After I installed all the updates again, I received a black with a message as screen "Boot Manager is missing, press Ctrl + Alt + Delete to restart» Excuse me for my English. I can explain my problem better in German or French. Please help me.
  Best wishes
  Franky

  Hey Franky

  Can you start / restart your laptop properly?

• I would like to make my PC opened as in there is no need for a password during the awakening / turn on the PC

  I would like to make my PC opened as in there is no need for a password during the awakening / turn on the computer.        Help, please!

  Thank you

  Hi, Andrew,.

  What version of Windows are you using?

  Press the Windows flag key + R to open the run

  Type control userpasswords2

  Press Ok

  User Tab - uncheck "users must enter a user name and password to use this computer.":

  Tab - Advanced settings uncheck "users must press Ctrl + Alt + Delete.

  Click on apply, Ok

  When the dialog box appears, type your user name and password (if you do not have a password, leave the field blank)

• Multi Boot options: where is the Boot Manager?

  In the future I want to run Win7 64 bit, XP 32-bit and another OS.  So a triple boot.  I use 3 small SSD or I can triple 2 small SSD partition and run them in Raid 0.  I am attracted by the latter due to the increase in performance.  I wonder where is stored the Boot Manager and can I put it on all 3 drives if I go with this scenario.  I am looking for better control, I guess.  Mechanical control is far superior to the software control but is not always available unfortunately.

  Find the folder in C:\Boot.

  Once Windows 7 is installed the boot.ini file is no longer used (do not delete it, just does not make any changes)

  EasyBCD can manage the names and the startup list:
  http://NeoSmart.NET/DL.php?id=1

  J W Stuart: http://www.pagestart.com

• Microsoft Flight Simulator has stopped working. Windows is looking for a solution to the problem

  Original title: games

  When I start my X Microsoft Flight Simulator (Deluxe Edition), it is running propely for some time (15 to 20 minutes) that it no longer works and gives me a message "Microsoft Flight Simulator has stopped working. Windows is looking for a solution to the problem"and he have me to close the program. (I have Windows 7)

  Help, please. :)

  I just "uninstalled" pack of the accelerator, and it worked fine.

• If I create a Web site now I will need to redraw it when the new version of delicate design comes out?

  If I create a Web site now I will need to redraw it when the new version of delicate design comes out?

  A sensitive site may be derived from the version of your office, but of course, you will need to put in some work to determine behaviors for other devices. There is no "one fits all", without worrying whether sensitive or selective.

  Mylenium

• Satellite L650 - 10 H - inputs multiple Win 7 in the Boot Manager

  I have Toshiba Satellite L650 - 10H and I have recently reinstalled my Win 7 64 bit.
  There is no problem at all except that initially to laptop, I get this [http://tinypic.com/r/se7uja/6].

  3 Win 7 entries in the Boot Manager

  I always choose the first and all is well.
  It's like the old copy of win does not delete but one that I formatted disks...

  Y at - it an option to get rid of him?
  I don't mind reinstalling again if I know it will help.

  Hello

  I seems that Boot Manager Windows 7 contains three entries and the other two entries are useless.

  I think you can remove the last two entries in the Boot Manager.
  How to do this?
  Well, I m using the EasyBCD software.
  It is a free tool and you can easily manage this settings.

  After installation, start the tool.
  In EasyBCD toolbar, you can check the option called Add/Remove entries.
  Well, I think that here you should be able to remove the last two entries.

• Watch does not recognize the weight class as exercise-how can you add the duration of activity manually because none of the presets eg elliptical etc. is appropriate. Also does not count calories for example 35 when the rest of the group is around 500

  Look does not recognize the weight class as exercise-how can you add the duration of activity manually because none of the presets etc for example elliptical is appropriate and therefore do not count toward the daily goal. Also does not count calories for example 35 when the average of the others in the group is around 500.

  Hello

  When you use the application of the training session, choose the type of activity that best fits your business. For anything else - like weight - select the other category.

  During the follow-up of one year to the next helps:

  • Activity app will credit the ring of progress of exercise with one minute for every minute of the workout.
  • Active calories will be based on the data recorded by the heart rate sensor or a brisk walk, whichever is greater.

  Note, however, that the heart rate sensor is likely to give better results for the workouts that involve rhythmic (for example running) rather than the irregular movements.

  More information:

  Use of the workout on your Apple Watch - Apple Support