Need for basic Windows Vista Home Edition recovery media
I lost my windows vista home basic DVD. I have my key windows vista with me. can I get a duplicate dvd or can I use another dvd with my cd key?
Read the info below re borrow a Vista DVD.
Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .
There is no Vista free download legal available.
Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.
Normally, they do this for a cost of $ small.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.
See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.
Normally, you have to press F10 or F11 at startup to start the recovery process...
Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Also ask them if it is possible to do the recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.
They will tell you how to do this.
Every computer manufacturer has their own way of making recovery disk/s.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
A good Vista DVD contains all versions of Vista.
The product key determines which version of Vista is installed.
There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.
If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):
Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.
At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu
http://support.Microsoft.com/default.aspx/KB/918884
MS advice on the conduct of clean install.
http://www.theeldergeekvista.com/vista_clean_installation.htm
A tutorial on the use of a clean install
http://www.winsupersite.com/showcase/winvista_install_03.asp
Super Guide Windows Vista Installation
After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.
Save all data, because it will be lost during a clean installation.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
http://support.Microsoft.com/default.aspx/KB/326246
'How to replace Microsoft software or hardware, order service packs and upgrades, and replace product manuals'
See you soon.
Mick Murphy - Microsoft partner
Tags: Windows
Similar Questions
-
Can I get a restore CD from HP for my Windows Vista Home Edition?
My hard drive crashed. It is in a Compaq Presario SR2150NX PC running Windows Vista Home Edition,
that was pre-installed. I do not have the installation diskettes; but I do not have the sticker
always on the side of the computer that has the product key. The player does not even start.
It is quite dead. If I buy a new hard drive and install in the machine, will I be able
to get a disk of software to replace Microsoft or HP for Vista Home operation
No fees + port, of course, since it is a genuine copy of Vista system? I still have
have purchase receipts original for computer, indicating the serial number, etc..
Sorry, I'm not computer savvy and don't know how everything works. I would of course
Appreciate any help in recovering my Vista. The error I get on my screen that says: "Reboot and".
Select proper boot device or Insert Boot Media in selected boot device and press a key"Frank post replacing > you can order a disk recovery for $27 the value of ComputerSurgeons.com .
-
Error when you try to add a basic Windows Vista Home Edition user account password.
I would like to add a password to secure my PC a little more by doing the following:
AutoScan (Vista Orb) > Control Panel > user accounts > create a password for your account
I enter a password to 10 characters. I tried more or less characters, a mixture of uppercase and lowercase letters and numbers etc, but everything I try I get the following message:"The password you entered does not meet the password policy requirements. Check the minimum password length, password complexity and password history requirements"
I am running Vista Home Basic.
I checked the Windows updates are all to date.
I tried to create a new user account and create a password for the new account (both of my main user account and the new user account) and I get the same message.
I also activated the 'Administrator' account (cmd > net user administrator / Active: Yes) and tried to use the administrator account to create a password and it does not work either!
I ran Microsoft Security Essentials software, choose scan "Full". The software found no viruses or malware on my computer, but he did put in quarantine RealVNC (software remote access we use occasionally to work).
I have created a screenshots of system information (to show which operating system I use), the dialogue 'create password for your account' (to show that I am logged on as administrator and to make sure that I do not have the process wrong--always possible!) and the error message "user account control panel.
I also took a screenshot of the thing that MSE found after analysis is complete on my system.
Microsoft Security Essentials here Info
Any ideas what to do here? I tried searching online and through this forum but have been unable to find someone who had the same problem, and even less it is solved!
Thank you
ChasSTW
Just a point, I would like to make...
There are some characters/symbols that are not allowed to be used as passwords.
Hope that you have not used one of these.t-4-2
-
My computer automatically did an update of Sam and immediately after it rebooted I received the message "the service user profile Service failed the log on.» User profile cannot be loaded. I am now in safe mode to try to figure out what to do if I can use my computer. Yet once, not didn't have a problem until the automatic update that Microsoft sent to my computer. I have not a clue what should be my descriptive Tag... HELP, please.
When I start my computer, it seems that it is fine... reboot brings the icon with my name "mkathleenthomson", but then I get the message I typed over top, the user profile Service
service does not have the log on
User profile cannot be loadedHello thomsonetc,
Thank you for taking the time to post.
You say the problem has occurred after an automatic update, have you tried the system restore?
It is not clear on what you have tried so far the problem so forgive me if you already tried below.
Difficulty of a corrupted user profile
And then take a look at this Microsoft Article if you still experience the problem.
"The user profile Service has no logon. Unable to load the user profile.
Please take a look at the thread below for more information by MVP Malkeleah
The user profile Service has no logon
Please let us know.
Thank you
Keith
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think -
How to get the source to windows vista Home premium recovery is not from the recovery partition and gives me an error message
Hello
Contact the computer manufacturer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it
they do it for a nominal cost of $
or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc
Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer
they contain all versions of vista
This is the product key that determines which version of vista is installed
http://www.theeldergeek.com/Vista/vista_clean_installation.html
How to replace Microsoft software or hardware, order service packs and replace product manuals
-
Why am I not able to download any of the service packs for windows vista home edition
Why am I not able to download any of the service packs for windows vista home edition
Windows Vista and Windows Server 2008 service Pack is not available for installation via Windows Update
http://support.Microsoft.com/kb/948343How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues
http://support.Microsoft.com/kb/947366Learn how to install Windows Vista Service Pack 1 (SP1)
http://windowshelp.Microsoft.com/Windows/en-us/help/133c8953-c9cd-4FA5-8883-03e91bb6f2021033.mspxLearn how to install Windows Vista Service Pack 2 (SP2)
http://windowshelp.Microsoft.com/Windows/en-GB/help/105f7420-6f7f-4FE8-8698-2f40ca5f53711033.mspx -
Remember - this is a public forum so never post private information such as numbers of mail or telephone!
Ideas: 2 Questions actually & I have Windows Vista Home Edition...:
(1) I begun to change some permissions under the Security tab of the properties, and now they are screwed... How can I reset just all permissions to the default settings? Help, please! Boy, I'm arrested for murder... My laptop about to be thrown through the window of a building-sky.
(2) is there a way to reset or restore my system? I don't like to lose anything it all. I saved what I want or need. I just want to start from scratch...
In fact, I have 1 other question... Whole reason I messed my permissions first is because I've had this laptop second hand and I did EVERYTHING to get rid of the old owners as a user name and I IMPOSSIBLE... It drives me crazy. I am the owner / administrator and there is no other user accounts, but still all my programs and files have this other names of people on them.
* Thank you very much to all those who can help me!
- You have problems with programs
- Error messages
- Recent changes to your computer
- What you have already tried to solve the problem
You must always wipe a used computer and start over.
How to get Vista recovery Media or the Vista recovery Partition on your computer back to factory settings.
There is no Vista free download legal available.
Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.
Normally, they do this for a cost of $ small.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.
See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.
Normally, you have to press F10 or F11 at startup to start the recovery process...
Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Also ask them if it is possible to do the recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.
They will tell you how to do this.
Every computer manufacturer has their own way of making recovery disk/s.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
A good Vista DVD contains all versions of Vista.
The product key determines which version of Vista is installed.There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.
If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):
Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.
At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu
http://support.Microsoft.com/default.aspx/KB/918884
MS advice on the conduct of clean install.
http://www.theeldergeekvista.com/vista_clean_installation.htm
A tutorial on the use of a clean install
http://www.winsupersite.com/showcase/winvista_install_03.asp
Super Guide Windows Vista Installation
After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.
Save all data, because it will be lost during a clean installation.
See you soon.
Mick Murphy - Microsoft partner
-
Windows XP Home Edition recovery CD
Looking to buy Windows XP Home Edition recovery for an Acer 3680 Lap top CD.
bgarner78,
Recovery CD is sold through OEM. You will need to check with Acer or you can check online auction sites.Mike - Engineer Support Microsoft Answers
Visit our Microsoft answers feedback Forum and let us know what you think. -
Windows PowerShell ISE is required on Windows Vista Home Edition?
Windows PowerShell ISE is required on Windows Vista Home Edition?
Original title: Windows PowerShell ISE
Hi MEL41,
Welcome to the community of Microsoft and thanks for posting the question. I've surely you will help find a solution on the issue. If I understand correctly, you need to learn more about Windows Powershell ISE, is it necessary for Windows Vista Home edition.
1. do you have problems regarding Windows Powershell ISE?
2. do you receive any error messages?
Windows PowerShell 1.0 is a new shell for command line based on tasks and a scripting language that is designed specifically for system administration. Based on Microsoft .NET Framework, Windows PowerShell IT helps professionals and expert users control and automate the administration of Windows operating system and the applications that run on Windows.Using Windows PowerShell, administrators can manage their systems by typing individual commands or running scripts that automate management tasks. Microsoft Exchange Server 2007, Microsoft System Center Operations Manager 2007, System Center Data Protection Manager V2, and System Center Virtual Machine Manager use Windows PowerShell to improve efficiency and productivity.Windows Powershell is intended for administrative purposes, if you use it, you can uninstall the update. I suggest you to read this article for more information.
Reference:
Windows PowerShell 1.0 for Windows Vista installation package
http://support.Microsoft.com/kb/928439Hope this information helps. Please reply back with the State so that we can help you. -
You need to reinstall Windows XP Home Edition.
You need to reinstall Windows XP Home Edition. Unable to find the blue disk... Windows XP operating system. Can I download it from somewhere?
I'm sorry, but you cannot download Windows XP.
If Windows XP came pre-installed on your computer, contact the manufacturer of your computer for a replacement drive. If you purchased a retail version of Windows XP, contact Microsoft.
This article in the Microsoft Knowledge Base has the details: How to replace Microsoft software or hardware, order service packs and updates of product and replace product manuals . -
I use a Windows Vista Home Edition on a laptop. The system connects to the Internet through a cellular router EDGE (via Ethernet) and receives the data by linking receiver DVB - S2 satellite broadband connected via a USB interface. The connection is through a VPN. Windows Vista loses the symbol of the "blue planet", as soon as the VPN connects. Authentication and connectivity is OK. DNS also works OK by the way VPN, with pointing to the VPN IP address 0.0.0.0. The diagnosis indicates an error where Vista says that she finds multiple active dial connections. Y at - it a configuration option that allows me to bind the interface transmission (VPN) with return channel satellite? The same software and configuration under Windows XP SP3 works OK.
Thanks in advance for your advice.
Hello
Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Technet Forum. You can follow the link to your question:
http://social.technet.Microsoft.com/forums/en-us/category/w7itproYou can also check the links below for assistance.
http://TechNet.Microsoft.com/en-us/library/cc728078 (WS.10) .aspx
http://TechNet.Microsoft.com/en-us/library/cc737767 (WS.10) .aspx
Hope that helps.
-
I have windows vist home Edition and I can't open files .scn, where can I get the program software to install, hopefully free.
Thank you for your time and help
KVL
I have windows vist home Edition and I can't open files .scn, where can I get the program software to install, hopefully free.
Thank you for your time and help
KVL
On .scn files:
file .scn extension:
http://www.FileInfo.com/extension/SCN
Program (s) that open. SCN files
WindowsMicrosoft Age of Mythology Info Microsoft Age of Mythology: the Titans Expansion Info Microsoft Age of Empires Info CPNBUILD Info
-
dosent Windows media player working properly. my laptop is windows vista home edition.
dosent Windows media player working properly. my laptop has my computer laptop windows vista home edition.any dvd dat file hanngs. anysoftware pilot is required?
Hello
· You have third-party codec installed on the system?
· Are you having this problem only during playback. File DAT via DVD or in other cases as well?
· Since when are you facing this problem?
· Remember to make changes to the system until the problem occurred?
Try also try to download the Codec on the system and then try to play the. DAT file and check if you experience the same problem.
For more information on the Codec see the link below.
http://Windows.Microsoft.com/en-us/Windows-Vista/codecs-frequently-asked-questions
You can also check:
Windows Media Player 11 may be temporarily unresponsive when you play a video file in Windows Vista
-
- I can't share internet and file simultaneously? If I share internet file sharing and disappear on the other PC if I share folder and run I can't share internet...
- 2. I have Windows Vista Home edition is possible with Windows XP prof sp2 Remote Desktop connection?
- othervise how?
Remote Desktop connection is not available in Vista Home: http://www.howtogeek.com/howto/windows-vista/turn-on-remote-desktop-in-windows-vista/.
I need more info on how your network is configured to answer the question on the other. How is the computer connected to the internet? It connects wireless or cable to the router or modem or through ICS from another computer or what? How do you change between the sharing of internet connection currently? What happens when you try to enable both connections at the same time (or do not have two connections)?
Thank you. The answers above, I can be able to understand the problem, because right now I really don't know how you setup and I need as much information as you can provide about it.
Good luck!
Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
I have windows vista home edition because I think it's slow, can I upgrade to windows 7
You can upgrade to Windows 7 If you buy.
http://www.Microsoft.com/Windows/Windows-7/get/Upgrade-Advisor.aspx
Windows 7 Upgrade Advisor.
http://TechNet.Microsoft.com/en-us/library/dd772579 (WS.10) .aspx
Railways upgrade to Windows 7 at the link above.
http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx
Windows 7 Hardware/Software Compatibility Center.
For any question on Windows 7:
http://social.answers.Microsoft.com/forums/en-us/category/Windows7
Link above is Windows 7 Forum for questions on Windows 7.
Windows 7 questions should be directed to / stationed there.
You are in the Vista Forums.
See you soon.
Mick Murphy - Microsoft partner
Maybe you are looking for
-
So can now update to El Capitan 10.11.6 seamlessly Logic Pro?
El Capitan 10.11.6 updates are available on my computer, I can now update? I'm really worried because Logic Pro X works well on 10.11.3 If I update everything will work perfectly?
-
How can I get firefox to launch automatically on connection to the internet
I want that firefox will automatically launch when I connect to the internet
-
XP SP3 install problem on my presario SR1550NX with proc AMD desktop computer.
When installing service pak 3 full and is restarting my system will go up only in safe mode, no error message that I can understand. It lasts for quite awhile and I've tried several things without success. Everything works well with SP2 but want to
-
Is it possible with the serial number of an Xserve to read the configuration and the year of production?
-
Hello I turned on my M30X and the screen is always black and I can not turn off the computer. The blue light around the on/off switch is always on. When I push the button nothing happens. The hard drive is running. The Wifi light works very well and