Need for guidance how to create a recovery on Portege M300 CD

Similar Questions

• How to create a recovery disc with all vista updates?

  original title: how to create a recovery disc with all vista updates without starting from scratch, so I can replace my hard drive?

  My hard drive seems to be dying.  I would replace the drive.  I reloaded vista from scratch with all the updates, but it took forever.  I would like to make a record of recovery with all updates.  IAM on vista Home premium.  32 bit

  If you want a good backup program that backups image, I recommend Acronis True Image 2010:http://www.acronis.com/homecomputing/products/trueimage/.  It offers a free trial, so you can test and if you want it's only about $30 for the original version.  A lot of people I know this program and use it instead of Vista even in versions of Vista that offers imagery as this program does a better job.  Of course you also need a place to put the backup (which will take a lot of space), so also consider.  The best choice would be a USB external hard drive at least as large as the readers you want to back up (not only the data on them, but the entire available disk space, so you miss when you add more information about the disks).

  You cannot use IMGBURN do - it can't do anything like that.  It must be the imagery of backup software.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How to create the recovery partition

  How to create a recovery for OSX on an existing SSD partition?

  What Mac OS X you are using?

  To boot from OS X Recovery, hold down the command (⌘) r immediately after start-up or that you restart your Mac. Release when you see the Apple logo.

  More information on the recovery of the operating system partition: On OS X Recovery - Apple Support

  If you want to create a bootable USB, here is a useful guide: create a bootable OS x - Apple support Installer

• Re: Satellite L355D - how to create a recovery disk?

  I searched all over the forums, but does not know how to create a recovery disk works for my laptop. I know it is run from a partition on the HARD drive, but I can't figure out how to access this partition. Should there be some sort of built-in utility?

  Thank you

  You can create the recovery only DVD disc if your laptop computer has preinstalled Toshiba recovery disc creator and factory settings.

  Please check if you can find this tool under start > all programs > Toshiba. There you should find shortcuts to launch this utility.

• EliteBook Folio 9470 m - how to create USB recovery in Win7 preinstalled?

  Hi, this will be my first post here, so please be gentle

  I have a new and pretty HP Elitebook Folio 9470 m for the test - it came with the operating system Windows 7 preinstalled. I wanted to check some things, play with it and as a careful user I wanted to first create recovery media. I have a 65GB flash drive which I previously used as a recovery media for other laptops, and (as this model does not have a CD/DVD drive) I wanted to use this time as well.

  First I searched on the web to find out how to create a recovery what USB for this laptop but the HP Web site gave me the info to use Recovery Manager, which I have not installed on this laptop - when I search for "recovery", I get something like "create HP recovery CD. And when I try to use it I get an error about no writable media (even the flash drive is connected).

  I came across a tip to the laptop F11 before starting, but I do not get the Recovery Manager or the other.

  Should I download and install from somewhere or there at - it another way to create the recovery key for this laptop?

  Hello Neith,

  You can use the HP Recovery Disk Flash for Windows 7 utility.  There is more information about the utility on this document from HP web.

  Best regards

  ERICO

• How to create a recovery media in Windows 8?

  You can become the owner of a new HP laptop, but unsure of how to create the recovery media so that it can be restored if this scenario arise.

  This video explains the process of creating the recovery media in Windows 8 on HP systems.

  I hope this information is useful for some.

• How to create a recovery for TPT 2 disc

  Hello

  I really don't like the idea that my only restore options re' is on the same drive. So, if my drive goes down, I have no recovery option. I tried to create a recovery disk using the tools integrated in Windows, but it error. Other forums say that it can happen with OEMs. So, how can I create a recovery for my TPT2 disc? I have a USB DVD burner

  Hello

  Yep, those are the steps I've tried. Then it gives me an error code 80070057 #. I tried with two different CD/DVD burners to ensure it wasn't a burner problem.

  Now, since the announcement, I found another recovery option that seems to work:

  1. tap search in the bar of charms.

  2. Type "Recovery" and then press on to find settings

  3. click on 'create a disc of Recvovery '.

  4. follow the steps in this wizard.

  This creates a recovery USB disk. I still prefer to have a CD through the utility to backup WIndows 7 and recovery screen, but I hope this recovery USB will work as well.

• HP pavilion 15 laptop: how to create the recovery partition?

  By mistake, my little brother have formatted the recovery partition. I'm not able to refresh the PC through update & recovery option in the settings of your laptop... I have the unique language of HP Pavilion 15 notebook.windows 8.1. Please guide recreate me the partition...

  Hello

  Thanks for posting in the HP Support forum. Welcome!

  I'm afraid that you can't create partitions of recovery if they are deleted. End users cannot do.

  If the computer is originally shipped with Windows preinstalled by HP (OEM of Windows for example), you can buy HP recovery media. They are generally cheap. You can use it to restore your computer to factory default condition. Here's how:

  > > http://support.hp.com/us-en/document/bph07143

  > > http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html

  And once you receive the recovery [DVD or USB pen drive] media, here's how to use it to restore default factory/Windows to a condition:

  > > http://support.hp.com/us-en/document/c03489643

  > > https://www.youtube.com/watch?v=PC3sUc3lr3E

  If the computer is originally not is not come with Windows pre-installed, but you install on your own after that, then you need to use the Windows installation media to reinstall Windows. You can get Windows installation ISOs from the Microsoft web site and then burn it to a DVD > > https://www.microsoft.com/en-us/software-download/windows8

  > > http://www.howtogeek.com/80094/how-to-burn-an-iso-image-in-windows-7/

  Please, let me know if this helps and works for you. Feel free to post for follow-up questions.

• Satellite Pro A300: How to create the recovery disk

  Hello
  I just bought a Satellite Pro A300 with Windows XP.
  I want to know how I can or if I need to create a recovery disk that will reset the machine to its original state.
  The information gives instuctions on how to proceed for the Vista machines, but not for XP.

  I know that I can recover from the hidden partition, but where this is not possible, I wish I could get CD or DVD.
  There is a recovery CD included product that says only: "MS Windows XP" so I guess that it does not include drivers or Toshiba Software?

  Any help appreciated,
  Thank you
  Mick

  Hello

  You have preinstalled software Toshiba TOSHIBA Recovery Disc Creator?

  Please check this box.
  Using the TOSHIBA Recovery Disc Creator you can create the recovery disk.

  But if your laptop was already pre-installed with Windows XP and then a Recovery CD or DVD must be included.

  Have you checked all of the items in the box?

• HP 15-p097tx: how to create a recovery media once more

  Is their any option to create recovery media once more? If not, then how can I get my laptop back if it becomes a problem in the future?

  This is my description of the product:

  HP 15-P097TX

  Windows 8.1 (64-bit)

  Hello mdja,.

  What do you mean by "creating a media recovery once more?

  Ask yourself how to create the media for the first time or you already have a set and need a 2nd set is made?

  IF for the first time, go to this link c04399755 and start on page 55 of the manual. It will explain how to create media and how to perform a restore.

  You can also go to this link for more info: HP computers - create a recovery Image on disk, or save a recovery Image on a Flash drive (Windows 8) | HP® support

  If you have already created a set of media, no matter if its were DVD or a USB key, you cannot create a 2nd set according to the HP license agreement.

  IF you need a 2nd set of media, you will need to buy only from HP directly for a small fee.

  Contact HP worldwide | HP® official site

• How to create the recovery disk in Windows 8

  Original title: HELP! I need to know how

  I recently got a laptop HP 2000 for Christmas. She has windows 8, which I'm not too used to it. And I can't understand how or where to go to create a recovery disc for it before you put anything else on my new computer laptop.  How can I do this? Any help would be appreciated.

  Hello

  Recovery of the system and the disk recovery options
  http://Windows.Microsoft.com/en-us/Windows-8/system-recovery-disk

  Create a recovery USB disk
  http://Windows.Microsoft.com/en-us/Windows-8/create-USB-recovery-drive

  How to create a system image to refresh your PC in Windows 8
  http://support.Microsoft.com/kb/2748351

  Some manufacturers have integrated recovery methods to verify with the help of HP, their online
  documentation and ask questions in the forums about known problems.

  HP support/troubleshooting & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  =========================

  While on the screen type start - Help

  Or Win Key Q plus Apps search - help

  Or charms - Search - Apps - Help Menu

  After that the foregoing-> on left click-> Help and Support.

  ==================================

  Solution Windows 8 - left Center - learn more
  http://support.Microsoft.com/GP/Windows-8

  Meet Windows - a good start
  http://Windows.Microsoft.com/en-us/Windows-8/meet

  Get to know Windows
  http://Windows.Microsoft.com/en-AU/Windows-8/basics#1TC=T1

  How-to: get acquainted with Windows
  http://Windows.Microsoft.com/en-AU/Windows/how-to#2TC=Windows8

  Contact: call, tap and beyond
  http://Windows.Microsoft.com/en-AU/Windows-8/touch-swipe-tap-beyond

  Is a free and convenient application available on the Store - Top Free
  "Windows 8 Cheat Keys.
  http://apps.Microsoft.com/Windows/en-us/app/Windows-8-cheat-keys/24f62990-98c7-4c26-95cb-cb09267680e8

  ==================================

  There is no start or the Windows 8 Start Menu button.

  Where is the start menu?
  http://Windows.Microsoft.com/en-us/Windows-8/where-is-start-menu

  Customize the splash screen
  http://Windows.Microsoft.com/en-us/Windows-8/start-screen#1TC=T1

  Windows 8 is not available classic appearance.

  3 third party programs can help:

  StarDock - Debut8 - costs 4.99 $US
  http://www.stardock.com/products/Start8/

  Free

  Classic interface
  http://www.classicshell.NET/

  Pokki
  https://www.pokki.com/Windows-8-Start-menu

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Satellite P750 PSAY1A: how to create the recovery Toshiba on the new HARD drive partition

  Hello

  I have an old Toshiba Satellite P750 (PSAY1A-01Y022). I just upgraded my memory from 4 GB to 8 GB and am preparing to take my 500 GB HARD drive 1 TB. I had to order the disk online and wait to happen.

  I always try to understand how to create the arrival of my new HARD drive Toshiba Recovery Partition. I do the same thing for an old book, I handled based on something similar to it's original factory State.

  I have reflected on the recovery partition, but does not know how it was created. It is not NTFS. Does anyone have experience in the creation of a Toshiba Recovery on a new HARD drive Partition?

  And the help is very appreciated.

  Thanks and regards,
  Dinesh

  Recovery partition can be created when you use the original Toshiba Recovery disk and install recovery image. Before the partitions to boot OS install will be automatically created, recovery image copied on a recovery and then partition as last step recovery image installation starts.

  A sort of migration of files from one to the other HARD disk is not solution.

  Only for laptop with factory will work and the usable recovery partition.

• Recovery disk for a T130: Re-create the recovery disk

  Hello

  I own a Toshiba T130, white model that comes with Windows 7 x 64, 4 GB of RAM and a DVD player. I recently tried to install a Linux operating system through a process that is automated via a network installation (Shoemaker), which has actually wiped clean the hard drive before installing the system, contrary to my intention at first actually install it on a separate partition, along side windows!

  It happens that (day 1, after having bought the laptop), I have already saved/stored the folder of HARD disk recovery (integer) initially placed on a second partition in Windows 7, on an external USB hard drive, but did not have a DVD or USB recovery media as it is recommended. The content of the file is as follows:

  + HDDRecovery
  + ODDFiles
  | + Start
  | + EFI
  | + HDDPREP
  | + HTMPREP
  | + Sources
  | + Tools
  + OriSetenv
  + Swing
  | 10347XSP.swm
  | 10347XSP2.swm
  | 10347XSP3.swm
  | 1034...
  | 10347XSP8.swm

  I think that these files are what is needed to create a recovery media and I have a need to restore my computer to its original state and recreate my Windows 7 environment. After all, it is here where I get my work.

  So, you guys don't know if I can build a support of restoring these files? If so, what is the procedure?

  Thank you very much
  Waiting for your response.

  -Ilyes Gouta

  As far as I know is now too late for the creation of recovery disks. If I remember well in s manuals is clearly described that you can install OS using only two procedures: using installation of recovery of HARD drive or using created the recovery DVDs (connected external USB optical disc drive).

  I'm 99.9% sure that the installation of the external HARD disk is not possible.

• How to create HP recovery disks? (HP Pavilion 500-035ed)

  Hello

  I have a new desktop HP Pavilion 500-035ed.

  Now, I want to create a recovery disc for future use (DVD). I can not find any function on the system.

  Anyone know how I can create recovery on one or two DVD discs?

  Thanks in advance,

  SJW

  Hello again,

  I just discovered the creation of recovery of CyberLink Media.

  SJW

• How to create the recovery disk

  Hello

  can someone help me create a recovery for my laptop Hp Pavilion G6 disc - 2330 m

  Windows 7, 64 bit.

  After inserting a dvd, I went to all the programs/maintenance/create a system repair disc

  but it gives the following error:

  The system repair disc could not be created

  The parameter is incorrect. (0 x 80070057)

  I posted earlier on my laptop freezing and respondent very late in command. I decided to create a recovery disk but have resulted in this issue.

  Help, please.

  Concerning

  Maury

  I suspect that the operating system on your laptop is probably not an OEM copy because of which the Recovery Manager is not available

  FYI, if the Recovery Manager was available, you can restore (restore your laptop back to the factory State) without the need to create recovery discs. The D:\ disc that is the recovery partition that would help you to do on your laptop.

  Try these steps and see if it works.

  1. click on Start button and type "devmgmt.msc" without the quotes and press ENTER key

  2. right click on the drive D:\ - HP Recovery partition and select Mark Partition Active.

  3. what would give you an alert/prompt, where you must choose Yes brings you to the Recovery Manager screen and restart your computer. You can follow the link that I provided above to start the process of recovery on your laptop.

  Note:

  Please backup your files before recovering on the laptop that it would result in the loss of data.