Need for reports and the analysis down server move to a different server
I lost my original for RA and re-installed server components on another server, however, when I try to access the workspace site, I get the message * "did not find a server Hyperion Reporting and analysis 'former name of the server running" at the port of 6800. Please check your connection string server and confirm that the server is configured. *I re - run the Setup and configuration without result. Is there a configuration file that I have to update somewhere?
This essentially means that the HSS register always points to the old name of the server for the RA_FRAMEWORK component. You will need to check through the report of registry if there several instance of the RA registered (one with the old server) framework and the other with the new server. If Yes, you can remove the old a registry through the epmsys_registry command line tool and reconfigure with the new server.
If you need help with the same, if it please raise a SR with Oracle support and should be able to guide you through.
Tags: Business Intelligence
Similar Questions
-
Forms for reports and the Web.Show_Document userid
I inherited several form - combinations of report to update and I am not familiar with the reports. I'm working to be converted to run under Web Forms / Reports 10
In a pair of form/report, the form passes the user of the report ID, and I was able to convert that.
In another pair, however, I don't see how the form passes authentication user name to run the report. The form creates a list of parameters, adds a number of parameters, but no user name, and then calls Run_Product. It works without problem, immediately send a report to my printer. Can someone explain what the form of forms 6 on connection information to the report? Where can I find the mechanisms which achieve?
I need to get this working in Web Forms.
Thanks in advance!Why Oracle provides the java frmrwinteg plugin to hide the name of user and password on the report URL in the browser?
Because you don't have to call a report from a form. Or you call a report of a form through web.show_document instead of via run_report_object.
Is - it so the report can be run with a different username than the Forms user ID?
It could be if you need this feature. But this seems very strange to me. Normally, you would then run the report with a default user defined in the mapping of keys to server file cgicmd.dat.
What is the difference between Run_Report_Object and Web.Show_Document.
Run_report_object is a direct communication between the drivers of forms and reports on the application server.
Web.show_document opens a URL in the browser on the client computer. -
I need a driver, and the Toolbox for Canon i-sensys MF 4450 printer.
Original title: Canon i-SENSYS MF4450
I need a driver, and the Toolbox for Canon i-sensys MF 4450 printer. It was fine when I used windows xp in my old computer. But now when I bought a new one, who have Windows 8 (x 64), I don't know what to do. Please help me!
LFF
Have you tried to contact Canon for a compatible driver?
-
Hyperion Reporting and patch analysis 9.3.3
Hello
Someone can guide me after installation of the Reporting and Analysis Services/Reporting and analysis UI services/Reporting and analysis Client/Reporting Migration Utliity 9.3.1 and now to install 9.3.3 need to apply different patches for these different components or a patch updates all components?
I downloaded the Patch 9900557 -Hyperion Reporting and analysis system of e - 9 release 9.3.3.0.0 stamp delivery.so if anyone knows which is the patch or do we need any patch separated for reporting and analysis, please let me know.
Thanks in advance,
NICI RamaThere is a single correction utility, the utility to install SP (patch.bat)
that will do a lot of the patch file automatically. The result of the patch is there are 3 new files of war/ear you will need to redeploy the application server in the configuration utility. This includes the workspace, financial reports and Web Analytics.Information is in the release of patch notes, but I think that answer your question - there is a simple script to run, and then redeploy the application servers.
Nick
-
original title: problem with shdocvw.dll
Hey guys just a quick question.
bascailly, I'm working on the first line of support for a company and we have created a software for the United Kingdom NHS, basically our software is used by doctor general practitioner through the United Kingdom to read documents electronically.
a question we seem to become much lately is certain parts of our software will disappear and then when it is closed, we get the usual "software encounterd a problem and needs to close" and the module faulitng error. When event viewer is selected the below appears.
Failing application dme7_client.exe, version 7.1.0.270, failing module shdocvw.dll, version 6.0.2900.6212, address 0x000b26fe failure
It seems that the only way to solve this problem is the newspaper on a differnet and use them as seems to be the specific user. does anyone have any ideas of what we can try to solve this problem without obiously the user with a different account?
see you soon
Hello
Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. Appropriate in the MSDN forums. Please post your question in the MSDN forums.
You can follow the link below to ask your question:
http://social.msdn.Microsoft.com/forums/en-us/categoriesI hope that helps!
-
sound
Hello
How can I stop my music skip or break down when I play?
http://windowshelp.Microsoft.com/Windows/en-us/help/36db5c82-9247-4346-909a-f87743b653ae1033.mspx#EFC1. right click the icon of speaker near right lower clock - peripheral of reading
Highlight speakers - properties (right same low page) - tab improvements - check Disable all sound effects
Apply - OK2. check the configuration - Device Manager - sound, video and game controller
Note name and complete model of the audio device - full decription - now double click it.
Driver tab - notice the driver version. Then click on set to update driver (maybe nothing like MS is far
behind the pilots of certification). Then right CLICK on the device - UNINSTALL - REBOOT - it will refresh
the driver stack.Now go to system Maker and look for the updated drivers (or get the same if no new) it will be
your rescue. Download - SAVE - go to where you put it-RIGHT click in it - RUN AS ADMINThen do the same for the manufacturer of the device (like Realtek or who made the device).
NOTE: Often restore audio drivers to check the version after installing and restarting is
see if the version you have installed is there, otherwise repeat the installation - restart until it is. This may take
several tests according to the recommitments how much he makes.
Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlI hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
Need for speed - error: the game has stopped working?
everytime I open the need for speed, the race. It does not open and says that "the game has stopped working.
Original title: program compatibility Application Applications App Apps game games Legacy Crash crashes Hang hangs
Hello
1. How did you install Need for Speed on the computer?
2 did you download and install it from the Internet or that you have installed by using the CD/DVD set?
3. which edition of the game that you are using?
4. don't you make changes to the computer before the show?
Please follow the steps below.
Method 1:
I suggest you to place the computer in a clean boot state and check if you are able to play the game. You can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
NOTE: after the troubleshooting steps, please return the computer to start as usual (see STEP 7 the above link)
Method 2:
Try to update the graphics card drivers and check if it works very well.
Click on the link below.
Updated a hardware driver that is not working properly
http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
Method 3:
Try to reinstall the game and check if it works very well.
Click on the link below.
Install a program
http://Windows.Microsoft.com/en-us/Windows7/install-a-program
I suggest also please contact the manufacturer of game for assistance.
-
How can I replace my app on iTunes Connect with a new version with air for iOS and app Loader?, how do I replace my app on iTunes Connect with a new version with AIR for iOS and the Application Loader? I got an error that the version number needs to be updated. I created a new record in iTunes Connect with version 1.1 and I took ownership of my current app 1.1 in air for iOS section in Flash.
Check your descriptor file to make sure that it shows the updated version, too.
-
When to use the cursor for loop and the cursor (open, fetch, close)
Hello world
I have a small doubt about when to use the cursor for loop and when to use the cursor for loop and the cursor (open, fetch, close).
Well, I'm not the difference between implicit and explicit cursor. So please tell me how I got to know, what to use and when?
Kind regards
BS2012
Published by: BS2012 on January 29, 2013 12:15All SQLs are analyzed, stored and executed as cursors. Thus, you will always use a cursor.
The problem is that languages, such as PL/SQL, provide different interfaces to interact with the SQL cursor. As the ref, the slider interface, the interface DBMS_SQL slider interface and so on.
Each of these interfaces offers different features. For example, using the interface DBMS_SQL allows binding dynamics and dynamic recovery. The Ref Cursor interface allows your code PL/SQL pass a handle to a reference pointing to the SQL cursor, to an external client. Etc.
The fundamental reason for the use of an explicit cursor interface is mainly that you own and manage bulk made extraction output provided by PL/SQL cursor.
With a cursor FOR , the motor loop of PL/SQL optimize the loop by extracting block a 100 lines both. However, you cannot access this collection in bulk directly inside the loop.
With an explicit cursor interface, you specify the size of the extraction in bulk via the clause LIMIT , and you set the variable of collection to use. This allows you to use the collection directly variable inside the loop.
However, the need to do - code manually in bulk collection - rarely occur in the daily programs in PL/SQL. A line of treatment is both slow and not well fits. And even if your bulk code collects lines, these lines must still be processed one at a time in your code. It is much more efficient and scalable rather write SQL code, and make the engine SQL the line of treatment for you.
-
Missing once more, the blue band at the top of my Web page that has the file ',' Edit etc and the toolbar with the House for 'Home' and the arrow «back to last page»
== My grandchildren's play about that.
Press the Alt key to display the Menu bar, then open view > toolbars and select menu bar and the bar of Navigation, so that they have a check mark.
-
I am trying to download my software on e-learning in my account and it shows no download available, even if I paid for this and the data of the invoice is there. any help?
Oh, Yes, well, if you're talking about e-learning 2.0 Suite... it's several years old... I don't know if Adobe has no download access user around holding method for that long... or even until the next version of the product is released... especially these days with the preference of creative cloud.
Always take the downloads, you have access to and store their future use yourself
You can try this (which came in another post on this forum):
Download the free trial version Adobe Elearning Suite | Adobe Elearning Suite 6.1
But it is for the latest version of eLS, not v.2.0. It can be a real challenge to find the installer for v2...
-
Hello I bought 2 months ago the annual plan of photography, and now cause im studying, if I have a student for aps discount all now, I start to study I will be charged twice for photography and the student all the aps plan? or he will renounce this photography automatically project the student and I will be charge for only $19.99?
You should see the links in the document below about educational discounts:
Alternatively, you can contact support for help FAQ: how to contact Adobe for support?
You may cancel the current and pay a new subscription.
-
I can not install updates for photoshop and the product is registered and properly installed
I can not install updates for photoshop and the product is registered and properly installed cat. I tried and they were worthless, this system I get when I click on the button in the error message customer support https://helpx.Adobe.com/Creative-Suite/KB/error-serial-number-qualifying-product.html
Customer chat was worthless, and I am really frustrated.
You can download and install updates,
Adobe - Photoshop: For Windows: Adobe Photoshop 12.0.4 updated for Adobe Photoshop CS5
http://www.Adobe.com/support/downloads/detail.jsp?ftpID=5373
But if you have a complaint about your serial number, chances are that they thought that it was hacked and blacklisted. You can't be at fault, you simply a forgery.
Nothing can be done if this is the case.
-
I have plan of creative photography of cloud, but also need for illustrator and indesign, what diet should I go for?
Reference:
https://creative.Adobe.com/plans
Concerning
Megha Rawat
-
Just bought photoshop cs6 for windows and the installation received disc.
Just bought photoshop cs6 for windows and the installation received disc. Where do you find the serial number on the disc? This should start the serial number? The disc was in the original box and I see a number starting with 910...
The box was in a brown envelope, and it has sticker bar code on the back with more digits. Where should I look for the actual serial number.
http://helpx.Adobe.com/x-productkb/global/find-serial-number.html
Maybe you are looking for
-
When I click on the link view comments on newspaper articles and online e, nothing is displayed. When I use Firefox at work or that you use Internet Explorer, comments are displayed under article.
-
I went to open the Hp Solution Center and they say that the software is incomplete and does not work. I've uninstalled and reinstalled the software 6 - 8 times and also used the disc installion with download of the latest device drivers. The comp
-
C4280 suddenly, a msg of unrecognized cartridge, without msg of low ink
My ink may be low, but I did have no MSG on it & have made little impression on a cartridge HP triple size, no fill. Msg is rather "cartridge not recognized" in the Middle a print job works otherwise. I tried to remove and reinsert the cartridges, b
-
E7450 processor and controller keyboard backlight
Hello I have a Latitude 7000 (processors E7450 and controller). The backlight on the keyboard does not work. I tried to hold Fn key + arrow to the right, but nothing happens. I looked at all the keys, but none of them have backlight icon. Could you p
-
Train with webutil works with the browser, but not with webstart JNLP 12 c
HelloI set up forms and reports suite 12 c according to the instructions and I'm testing my forms updated since version 10 g.In some forms, I use webutil.I can run forms without webutil with the browser or java web start (everything works fine).I hav