Need for SP A10 CPU fans

Similar Questions

• What software and what driver is needed for cononpowershot A10 digital camera?

  looking for software and driver

  You don't need to be.  Just slightly the cable supplied with the unit or one of the readers of SD cards.  With cable, you plug one end into the camera and the other into the USB port and then turn on the camera.  A wizard will open that allows you to copy the photos on the computer.  If you have a SD card reader, you can remove the card from the camera and put it in the drive and then go to the map as you would with a flash drive.

  Good luck.

• CPU FOR HPE-350 T FAN

  I am looking for the part number for a replacement CPU fan for my HPE-350 t.

  Thank you

  Hello

  your motherboard product comes to MSI MS-7613... and including the Socket 1156 socket

  Buy cooler master or any fan of Cup for socket 1156... You can get it easily from any store...

  Hope this will solve your quiery...

• Kaput CPU fan

  I need info about the CPU fan OK for my a6030n HP Pavilion with an ECS MCP61PM-HM nettle - GL8E motherboard.  Athlon 64 x 2 (B) 4800 + 2.5 GHz Socket AM2.  Just fan or radiator?  Message on screen is CPU and system fan failure.  The system is 7 years, but I can't afford a new.  Thank everyone in advance of aid =)

  Hello @Nana2004,

  I understand that you get the error CPU fan has failed on your HP Pavilion a6030n desktop PC. I provided you with the HP support document: error: CPU fan failure, who will provide you with steps to try before spending money on a fan that you may not need. In the case where you need to replace the heat sink search number is 5187-5704 and can be found in a Google search.

  I hope that I have answered your question to your satisfaction. Thanks for posting on the HP Forums. Have a great weekend!

• How / change CPU fan on T41 1.7 Ghz

  Hello

  In my IBM thinkpad T41 2373-4KU I need to change the CPU fan gets very loud. I found two types of fan to buy. How would I know if I need a long or other? Y at - it both compatible with my camera?
  I need documentation to disassemble my laptop? If so where I would have to find? I not found this information on the IBM/Lenovo website.

  Thks and greetings,
  Gromit1

  Welcome to the forum!

  Your machine needs a fan "short." All replacement instructions are in the HMM:

  http://www-307.IBM.com/PC/support/site.WSS/document.do?sitestyle=Lenovo&lndocid=MIGR-46464

• Satellite A10 S203: the CPU fan does not work properly?

  I have toshiba satellite a10 s203 and the cpu fan does not work correctly. What can I do about it?

  Hi SACRIFICE them.

  Here are some possible solutions to this problem of fan.

  1. When you have installed a base installation of MS (not the Toshiba Recovery CD) you need to install the Toshiba Power Saver and others utilities from the CD tools & utilities. The energy saver is responsible for the control of the fan.

  2. If you have a recovery based OS, you can update the energy saver of http://eu.computers.toshiba-europe.com site Web Toshiba under Support & Downloads - Download Driver

  If please check this and an answer then follow the next step!

  CAMPino

• Satellite A10-SP100: can I manually enable the CPU fan

  Hi everyone, I need help with that.

  My active cpu at 60 ° c, fan but his stop at 50 ° c.
  The thing is I want my CPU fans to stop at 40 and not 50, ' coz it off my pc when I do something heavy (game game, etc)

  My question is... it is a way to manually activate my fan and then turn it off when it reaches the 40 ° c approximately
  I have a Toshiba Satellite A10-SP100 wih Windows XP Pro.

  Thank you very much!
  Pablo

  Hello

  What you can do is to change some parameters in the Toshiba Power Saver.
  I assume you are using this tool and it s preinstalled on your system

  OK, you can find the Toshiba Power Saver in the control panel.

  Access the GST and chose the details of you power mode.
  Then switch to the power saving (second tab) and set the method of cooling for maximum performance.

  This should increase the fan speed and cooling performance.

  Concerning

• Satellite P200 - need CPU fan replacement

  I have a Satellite P200-16V and my problem is on the cpu fan.

  I tried to open it, but after the keyboard, hard drive, Rams, OVOCHECK and 40-50 screws and some cables, I realized I have to get out the motherboard and screen mabe and I close it again after 3-4 hours. The cpu fan has been breaking and I don't know what to do.

  I am from Greece. If I go to the toshiba in Greece, I can find a cpu fan or any system cpu radiator? Can you help me?

  Hey Buddy,

  Looks like the fan needs to be replaced and therefore, you should contact the closest service provider authorized in your country. Guys can order a replacement part and swap it out.

  On the Toshiba site, you can find a list of them:
  http://EU.computers.Toshiba-Europe.com > support & downloads > find an authorized service provider

  Sorry, but everything that s what I can say. Here it s only a user forum so I think no one knows the exact number of part or a manual how to take apart the laptop but the ASP can do for you. :)

• Pavilion dv7: radiator for CPU fan replacement dv7-6160ez

  Hi all

  my my computer CPU fan laptop dv7-6160ez is down.

  I can find several dealers fan, but it seems that the radiator is never included.

  do I need a new heat sink too?

  where do I find this?

  thx for the help

  rz_a

  In my opinion, is good call society Tel.: + 41 41 785 13 13 then are safe

• Search for the name and part number of the CPU or fan of radiator for Pavilion m9300t Desktop fan.

  Looking for a part number and the name of processor or fan for desktop computer HP Pavilion m9300t radiator fan. Noise one supplied with the PC is a terrible grinding until the system stops and dies.

  Hello

  I highly recommend not to turn on your computer until the fan is replaced.

  Is your PC still under warranty?

  You may not use the original part.

  All you need is to have a CPU for a socket 775 CPU fan (LGA775). I recommend that you choose 90-92mm fan size due to the limitations of the original business space.

  You will also need thermal interface (I recommend Arctic Silver 5 or OCZ Freeze Thermal Interface material)

  material can be purchased at any store for PC. You can also have the fan replaced in a PC shop little charges.

  The original p/n is 5188-5525 to the heat sink. Source reference: HP PartSurfer

• Where to buy for my Satellite Pro P300 CPU fan?

  Hello

  I noticed some not very good sound from my cpu fan, as well as my 17 "laptop overheating.
  I decided it was time to replace the cpu - model KSB0505HA fan

  Now I wonder where I can buy a new fan for this model?
  I found a site in New Zealand, but the fan is for the P305 series, and I'm not sure if it would be compatible with my laptop.

  Could someone advise me on where I can get a new fan of cpu for this series?

  Thank you ~.

  In order to ensure:
  I'm looking for one in my country - the New Zealand!

  Added that the search for a New Zealand

  P305 is probably model proposed in US, but it must be the same as P300 in Europe or in THE so I think it should be good.

  I put t know where you can order it, but try to use Google and check if you can find a store online in AU where you can order.

  I can also imagine that you can order by the nearest Toshiba authorized service provider. Call and ask.

• Need drivers of Windows XP Home for Satellite A10 - G3

  I need drivers for Satellite A10 - G3 (model PSA10E-01SZZ-G3) for WinXP PRO.

  I checked Toshiba support page under http://eu.computers.toshiba-europe.com > support & downloads and you can find all the drivers of Windows XP Home for your Satellite A10 (PSA10E).

• Need to swap the CPU of a Satellite A80 154 fan

  Hey there,

  I use a Satellite A80. My CPU fan no longer works and I want to change it.
  Anyone know where I can get a guit maintenace and service for the A80 know how open and change the FAN or someone knows how to change the fan?
  Thx a lot

  Hello

  I think it would look better in your situation contact a local authorized service partner because exchanging a fan in a notebook is not like exchanging into a desktop computer.
  Just a suggestion: click on the following link:

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT

  You can call and send maybe your machine for them. Should be more advisable to give some expert to do this because you can cause serious damage to your machine when you are not familiar with these electronic components to your machine.

  Welcome them

• 850 - 009na M1Z34EA #ABU: CPU fan for the 850-009na feel like Phoenix does not turn down after the power - on self test unless the BIOS is entered

  Hello

  I have posted responses to other posts on this topic, but thought I'd start a new thread to gather my conclusions. I'm sorry for a trial

  This PC is virtually brand new (only a few weeks now) and otherwise perform exceptionally.

  Basically, if the machine is disconnected from the power grid (i.e. the power is off at the plug or the power cord removed), when the machine is supplied then the CPU fan turns over 2000 rpm and stays there. All the other PC that I do this too, but the fan will slow down after turning upward. I know that this is done as part of the POST to check that the fan is running.

  If I go into any installation of seed, start-up or BIOS for example (i.e. by pressing ESC or F10 etc.), the fan will slow down immediately up to 700 rpm. It will stay like that until the next time the machine is started against the cold. If I shut down the PC - watch or stop - but do not cut the power supply, then the next time the machine is started, the fan is still about 700 rpm. It is not to turn up to 2 k + RPM when lit.

  As soon as I unplug, then the next time the PC boots, it will turn to the top and I have to repeat steps - off, boot, enter the BIOS, exit and continue. It is something to do with the cold start.

  Note that I don't have to do anything in the start menu - I for example go to the BIOS settings, exit without saving the changes, and the fan will still slow. It's going in the boot sector that slows down the fan.

  When the PC started out-of-the-box, I opted for the upgrade to Windows 10 during installation. I have read in various places that people had experienced after the upgrade, so I reset the machine to factory settings (Win 8.1) and have not upgraded, but the problem persisted. However convinces me that Windows 10 has been removed completely, as when I went to restore the backup image (i.e. dating back to what I had before the factory reset) there are references to 10 Windows (for example, it says 'Continue to Windows 10' as well as various food options). I do not understand UEFI so I don't know if that was involved.

  I tried to change the power plan options "Processor power management-> cooling system strategy" on the liabilities side, but no joy there.

  I think that the fan and sensors work, based on the findings below. These readings of temp and fan are taken from AIDA64

  After starting cold (current was cut, without entering the BIOS), machine runs dry without load

  

  Exactly the same thing--starting in cold, but go in the BIOS, do nothing and continue. Once again, no load

  

  This is after power off and resarting, but to let the PC network

  

  After the above, I used Prime95 to put the CPU support (use of 95-100%), and after an hour, the readings are:

  

  Note that even so, the fan was not particularly strong, but it's at 2222 rpm as in the first reading.

  If I play at 4K (the whole point of the PC ) the CPU so far got very warm, the GPU is but his fan turns up as planned.

  In conclusion, it seems that the POST has a problem because it does not slow down the fan after the test.

  I can live with let the machine always plugged into the sector (for example, most of the time) and I guess that's what most people do, but I would like to know what the problem is (for example if it's really something 10 Windows, or a bug in the BIOS/UEFI)

  Thank you very much!

  John

  Explain you a lot of people who maybe have returned their system immediately because of this? Others might judge normal sound. Not irritable average is not coming here to complain. Others might judge her so little. They simply don't like. You will never convince me that is not a BIOS problem. As the problem resolves itself when you enter manually each time. It can be reproduced every time.

• «the cpu fan works not.» Check the fan connections and call for service. »

  I was wondering if a failure of different from 'CPU fan has failed... system in a few seconds will stop. " I have an office of DX - 2000 P4 under XP SP3 that I just changed the motherboard and CPU fan on. All the fans are running at about the same speed. (P/S, chassis and CPU). Not very fast but cannot see the fins. Computer sat for several years. I was wondering what is the real test and how the fan speed is controlled. I suppose that temperature sensors built into the cpu, somehow, there must be a variable voltage applied to the fans to change their speed and/or a measuring device to see what is their RPM. This must be controlled by the BIOS as is any pass/fail test. My next step is to replace the old fan and see what happens. I have a new p/s to install should be here today. Actually used, but cleaned up and tested. Economy of cleanup. Not sure if my older diet could be the cause of the issue with low Volt.

  If the fan is slower than the factory fan, you will have this problem.