Need help/advice on the upgrading GFX and power supply for PC p6754y

Similar Questions

• Please help me with the video card and power supply issues!

  Hello and thanks in advance for any help. I'll try and do a short explanation, but I can't promise anything. I bought an a6620f Pavilion about 2 months ago I didn't know that you had to purchase a special hardware in order to play video games. In any case, I bought about 300.00 worth of new video games and none of them works. they say because of my video card. Then try to buy a new video card and it won't work because I only have a 250 watt power supply. I spoke with a hp technician before you buy a PSU and I was told that my motherboard was only designed to use a 300 watt max power I tried to buy one at best buy and the clerk said 4500 is the smallest they sell. and I need at least a 400 Watt or powerrsupply to make the new video card with a value of buyiong. My questuion is what can I do if I can't buy one more big power supply how can I install a new video casrd? Please help me I'm lost

  Oh and in case you want some specs on my system here are a few

  Windows Vista Home premium service pack1
  HP Pavilion a6620f
  Processor: pentium dual core cpu e5200 @ 2.50 GHZ
  memory: 4.00 GB
  system type: 64-bit operating system
  Version of DirectX 10
  graphics card: intel GMA 3100 Total memory 256 MB

  Message edited by chefinomaha on 06/03/2009 16:38

  Hi chefinomaha,

  Sorry to hear about your frustration. Here's some good news.

  I think you have been misinformed or there was a communication error. Your motherboard should not be limited to the only 300W. I don't know with certainty how high you can go in watts, but you can go higher and should go higher, if you add a video card.

  The important thing is to get the right kind of diet that fits your connectors.

  Here's your motherboard page.

  Here is a document with step-by-step instructions and video for adding a video card.

  Here is a document with the video to replace the power supply.

• Need help to check the switch VMNIC and VNIC DVS mapping...

  Need help to check the switch VMNIC and VNIC DVS mapping...

  I checked the command net-dvs, but it was not useful.

  Thank you

  Ravinder Singh...

  You do not have access on the interfaces between itself or this info is not visible in vCenter? Probably, you should talk to one who is in charge of your nexus dvSwitch.

  I don't know how it works on the nexus 1000v switch, but the output of the net-dvs provides information on balancing policy for all ports (note that he understands the uplink ports that may still occur as "port id of virtual source"):

  # net-dvs. "grep EI ' (Balancing | port)"

  port 320:

  source port = load balancing virtual id

  port 321:

  source port = load balancing virtual id

  port 177:

  source port = load balancing virtual id

  You should also be able to enter this info from esxcli, but I don't know if there is a hook to esxcli for the link. Perhaps, you can branch off with cisco of dvs esxcli vswitch network or something. On the dVS of vmware, you could do:

  # esxcli dvs lacp vmware vswitch network status

  LACP is disabled on DVSwitch.

  
  

  # esxcli dvs lacp get config vmware vswitch network

  DVS name LAG ID cards active network Mode

  ------------  ------  -------------  -------  ----

  Vmnic1 Some_DVSwitch 0, vmnic3 false

• cq57: need help cq57 enter the password administrator or power on password... deisabled system 58555314

  need help cq57 enter the password administrator or power on password... deisabled system 58555314

  Thank you!!!

  @clatimer

  Enter 47433930

  REO

• Get a new case and power supply for my HP Pavilion a6355.uk

  1. sound of the HP Pavilion a6355.uk

  2. Windows 7 Professional 64-bit

  3. no error message

  4. it is not a problem, but its had a new graphics card, new ssd, another hard drive, removed the 500 GB hard drive, and that's all I think.

  Hi, I want to get a new case and power supply for my office

  If I want is http://www.pcworld.co.uk/gbuk/antec-one-0-761345-15970-8-atx-full-tower-pc-case-black-13374257-pdt.h...

  The power I want is http://www.pcworld.co.uk/gbuk/zs650w-uk-zs-series-ocz-zs650w-uk-atx-psu-650w-11342059-pdt.html

  Is 650 Watt most the jury can take? I read somewhere that most can take is 650 watts.

  My only concern is that, how do you take the I/O shield? I've never done before.

  Yes, it will fit your card mother Μatx.

  PS > remember to toggle the toggle SOLVED / SOLUTION to the right of MY post/reply.

• Qosmio X X 770-11 - new motherboard and power supply for sale

  Brand new motherboard and power supply for sale

  Posted by jtk
  

  Brand new motherboard and power supply for sale

  Also Intel® Core i7-2670QM CPU
  4 096 + 4 096) MB, DDR3 RAM (1 333 MHz) memory
  1 000 hard drive (Solid State hybrid 4 G Drive with 500 GB and 4 GB of memory NAND flash + 500 GB) GB
  Jim Kerr sent from my iPad

• Need help to read the xml file and place it in a table.

  Nice day!
  
  Here is the configuration. I have a xml file from another source which will call a stored procedure in my database (which I am supposed to create). This is a first for me, I've never done development pl/sql or worked with xml. :(
  
  That's what I hoped to accomplish, if there is a better way, that I am open to him.
  In short, to have a stored procedure that takes the xml file (transmitted by third parties via the call, no url must be a file), creates a temporary table and populates the two columns needed. Then, the SP will make a select join with the temporary table and other data available in another schema. Once the completed table selection will be truncated and dropped. SP farm.
  
  Details:
  DB: Oracle 11.2.0.1 RAC.
  Charset: AL32UTF8
  Example of XML: (nearly 10,000 lines like this in production)
  "< MerchantID report =" "#" name = 'Conversion detail report' ReportStartDate = '2011-09-27 12:00:00GMT' ReportEndDate = '2011-09-27 21:38:13GMT"Version ="1.1"> < Conversion = '1234567891234567 D' MerchantReferenceNumber Convertingdate =" 2011-09-27 13:39:02 "RequestID ="1234567891234567891234"> < OriginalDecision > REVIEW < / OriginalDecision > < NewDecision > ACCEPT < / NewDecision > < Reviewer > testusr < / examiner > < ReviewerComments > no reason to reject. < / ReviewerComments > < Notes > < Note Date = "2011-09-27 13:39:02" AddedBy = "testusr" comment = "Took possession" / > < / Notes > < queue > Digital Review < / queue > < profile > Digital orders QA < / profile > < / Conversion > "
  ...
  < / report >
  
  What I tried.
  I found a tutorial: http://it.toolbox.com/blogs/oracle-guide/oracle-and-xml-in-action-a-real-world-example-5319 I tried and was able to make it work. But I could not duplicate the results with my xml file. So I looked away and have had no success. :( I'm not a developer, so I'm really bad...
  
  I found a note of support: (how to load an XML file into a Database Table using DBMS_XMLSave unaided Bfile [227476.1 ID]) and couldn't make it work.
  
  I found some online then Odie son xml and tried these but slipped and couldn't get my versions of these great answers to work for me.
  
  Then... I'm here now and hoping that someone could walk me through this.
  
  
  I tinkered this SP (it doesn't have to be that way, the suggestions are greatly appreciated)
  
  create or replace procedure xml_to_table (call_1 call_2) as
  
  Start
  run immediately "CREATE GLOBAL TEMPORARY TABLE XMLType IMRPT
  --(clé primaire contrainte-imrpt_pk (MerchantReferenceNumber))
  XmlType store as xml binary basicfile
  -(high compression)
  virtual columns
  (MerchantReferenceNumber as (xmlcast (xmlquery ('/ Conversion/MerchantReferenceNumber ' from object_value content back) as VARCHAR2 (32))))
  , NewDecision as (xmlcast (xmlquery ('/ Conversion/NewDecision ' from object_value content back) as VARCHAR2 (10)))
  )
  -ON COMMIT PRESERVE ROWS
  
  run immediately 'save xml as a file on the local system?'
  
  insert into IMRPT (MerchantReferenceNumber, NewDecision)
  
  run immediately "join select statement.
  run immediately 'truncate table IMRPT.
  run immediately "drop table IMRTP.
  
  end;
  /
  
  On my last test, I tried to select just in the xml file using this:
  
  DECLARE
  indomdoc DBMS_XMLDOM. DOMDocument;
  innode DBMS_XMLDOM. DOMNode;
  myParser DBMS_XMLPARSER.parser;
  buf VARCHAR2 (2000);
  BEGIN
  myParser: = DBMS_XMLPARSER.newParser;
  
  DBMS_XMLPARSER.setBaseDir (myparser, 'XML_DIR');
  DBMS_XMLPARSER. Parse (myParser, "test.xml");
  
  indomdoc: = DBMS_XMLPARSER.getDocument (myParser);
  
  -just to test content
  innode: = DBMS_XMLDOM.makeNode (indomdoc);
  DBMS_XMLDOM.writeToBuffer (innode, buf);
  Dbms_output.put_line (BUF);
  
  dbms_xmldom.freeDocument (indomdoc);
  dbms_xmlparser.freeParser (myParser);
  END;
  /
  
  It was another accident and burn.
  
  Any help would be appreciated.
  
  Thank you

  Like I said:

  Here is an example using a REF CURSOR variable ( you will need to declare a plus for your actual procedure )

  Your procedure has two parameters, you must declare two variables to hold the two REF CURSOR ;)

  DECLARE
  
    v_filename      VARCHAR2(50) := 'DMReport.xml';
    v_rc1            SYS_REFCURSOR;
    v_rc2            SYS_REFCURSOR;
  
    v_order_name       VARCHAR2(100);
    v_reason_text      VARCHAR2(100);
  
  BEGIN
  
    xml2table(v_filename, v_rc1, v_rc2);
  
    commit;
  
    loop
      fetch v_rc1 into v_order_name;
      exit when v_rc1%notfound;
      dbms_output.put_line('ORDER_NAME='||v_order_name);
    end loop;
  
    close v_rc1;
  
    loop
      fetch v_rc2 into v_order_name, v_reason_text;
      exit when v_rc2%notfound;
      dbms_output.put_line('ORDER_NAME='||v_order_name||', REASON_TEXT='||v_reason_text);
    end loop;
  
    close v_rc2;
  
  END;
  /
  

  If you test this in SQL * Plus, do not forget to SET SERVEROUTPUT ON to see the result.

• Need help to synchronize the pre-production and production box init parameter

  Hello
  
  I have a HP - UX 11i production database. The database is the CARS with 3 instances. The storage is on ASM. Recently, we have created a database of pre-production for tests on RedHat Linux 4 worm. Here are the details of the environment 2:
  
  Production: HP - UX 11i, 24 GB of RAM, 8 CPU, Oracle 10g R2
  
  Pre-production: RED HAT ver 4, 16 GB RAM, 4 CPUS, Oracle 10 g R2
  
  Basically everything in creation the two environment are not identical configuration. Now, I need to bring to the pre-production environment in harmony with the environment of Production from the point of view oracle init parameter. I have listed down below below the parameters that is different. Please tell me how many of these parameters can be bring in sync. Setting shmmax doesn't set on the two core area is 4 GB.
  
  Name of the parameter of V$, value on Production - value on the pre-production
  -----------------------------------------------------------------------------------------------------
  cpu_count----------------------------------8-------------------------------------     4
  CURSOR_SHARING - EXACT - FORCE
  db_recovery_file_dest_size - 32212254720 - 15032385536
  dml_locks----------------------------------1472----------------------------------748
  fast_start_parallel_rollback - LOW - FALSE
  filesystemio_options - asynch - no
  LARGE_POOL_SIZE - 33554432 - 0
  log_buffer - 14493696 - 7012352
  log_checkpoints_to_alert - TRUE - FALSE
  open_cursors - 1000 - 300
  parallel_execution_message_size - 2152 - 2148
  PARALLEL_MAX_SERVERS - 160-80
  pga_aggregate_target - 2147483648 - 1692401664
  processes----------------------------------     300-----------------------------------150
  session_cached_cursors - 100-20
  sessions------------------------------------     335-----------------------------------170
  SGA_MAX_SIZE - 5368709120 - 675282944
  SGA_TARGET - 3221225472 - 675282944
  sql92_security - FALSE - TRUE
  standby_file_management - MANUAL - AUTO
  transactions - 368-187
  UNDO_RETENTION - 10800 - 1800
  
  Thank you

  NOTE: You must be a query V$ PARAMETER ISDEFAULT = "FALSE" only to identify the paraemters which are or have to be defined.
  You must identify these paraemters which are explicitly defined by the DBA, rather automatically determined by Oracle.

  1. you do not explicitly set or change cpu_count. Let Oracle automatically set it based on the number of processors / cores he sees as being available. (if you have multiple instances of database on the same server, each instance will 'see' the same number of processors / cores)

  2 cursor_sharing must always be the same development, pre-production and Production. However, I would first of all ask allows you to determine why it has been set by the dint of Production. That must be done only after careful consideration and test!

  3 db_recovery_dest_file size is relevant for backups RMAN identified by db_recovery_dest disk space. If it is not relevant to this discussion.

  4 dml_locks, sessions, transactions, etc. are all automatically determined by Oracle based on the PROCESS.

  5 fast_start_parallel_rollback is irrelevant. I wonder why it has been explicitly defined?

  6 filesystemio_options really depends on your platform. HP - UX 11i and Redhat Linux are very different.

  7 are defined explicitly large_pool_size and log_buffer? Or they remain to be determined automatically by Oracle based on other parameters (SGA_TARGET for example)?

  8 open_cursors, generally not be set unless you have an application that really opens up very many cursors by session. Why is defined differently? It is a per session setting.

  9. I suppose that parallel_max_servers is not explicitly defined, but remains to be determined by Oracle based on other parameters (for example cpu_count).

  10. I wonder if parallel_execution_message_size has been explicitly defined or is automatically defined by Oracle and OS dependent.

  11 pga_aggregate_target would have explicitly set the appropriate value based on your hardware and its use must be determined.

  12 session_cached_cursors generally didn't need to be explicitly defined. If it is set, why he is set on these different values?

  13. Why is SQL92_SECURITY explicitly different?

  14 standby_file_management is not relevant here.

  15 undo_retention could be about the same.

  Your REAL concern should be the values defined for CURSOR_SHARING and SQL92_SECURITY. These are the only ones who are really identical in both environments. The others are "setting buttons" while these "fix"behavior ".

  Hemant K Collette

• Upgrading the video card and power supply, these will work with my system?

  Hello, I am wanting to update my graphics card as my current one is finally fall behind on current games, BF3 beta is a restless nighmare and BC2 must be smooth running low (ick). I was satisfied with the weaker graphics for now, but its time for an upgrade. In any case, I think I have my selected updates and I just want to confirm that they will work with my computer until I pull the trigger. My current equipment:

  HP p6180t

  http://h10025.www1.HP.com/ewfrf/wc/product?product=4010451&LC=en&cc=us&DLC=en&lang=en&tmp_track_link...

  Intel Core2 Quad 2.83 GHZ

  8.00 GB RAM DDR3

  Vista 64-bit

  Creative Sound Blaster X - Fi Audio Xrteme

  1.5 GB NVIDEA GeForce GT230 [DVI, HDMI, VGA]

  I plan on upgrading the graphics card on an Asus NVIDEA GeForce GTX 560 (Fermi)

  http://www.Newegg.com/product/product.aspx?item=N82E16814121446

  And the power of a passionate Corsair 850W 80 + CERT (I know this is perhaps an exaggeration, but I can update to motherboards in the future to run two SLI cards and do not want to upgrade again)

  http://www.Newegg.com/product/product.aspx?item=17-139-009&SortField=0&SummaryType=0&PageSize=10&PUR...

  I removed the side panel to check the dimensions of the new card and it looks like it fits. The only thing that could be a problem of release the cables SATA for the hard drive and hard drive because they are both plugged into the two slots, I don't think that the two superiors would be no problem at all. Depending on the thickness of the new card is also, it may be very close to the sound card that is spaced only a slit above the graphics card. I have another location available PCIe x 1 go back one level more that I should be able to plug the sound card in if there is no problem.

  My question is that these two will be compatible with my system? (physical limitations side)

  Also, can I change which SATA plug the hard drive and disc plug in, without having to reformat? Is it just unplug and plug in the new housing? (setting power off + unplugged of course) Basically passing SATA0 and SATA1, SATA2, and SATA3. Or do need to be filled in order? (0 then 1 then 2, etc...)

  Finally, If I can't move the sound of a standard card, do I need to do anything other than the physically move when the computer is turned off and unplugged?

  Any help is appreciated, thanks!

  John

  jkalbin,

  You have thought through all scenerios. Move the sound card does not any problems. The hard drive should stay in header SATA 0.

• Need the dimensions of XPS8300 power supply for the upgrade.

  So I bought a Dell XPS 8300 on sale Black Friday mainly because of the processor, RAM and HARD drive.  I need a new computer and wanted it to be fast but also wanted a desktop computer, because I intend to upgrade to a better quality of game.  I plan on upgrading the graphics card to a Geforce GTX 560 Ti FPB.  I understand that this will require a more powerful power supply and seeks to those at the moment, probably a 760W supply.  My concerns are mainly regarding the power supply box installation.

  Currently my XPS 8300 has a 7P3WV 460W power supply.  Part # H460AD-00.  Someone has dimensions on this so I can get a power supply that will compete?

  Or if no dimensions does anyone know of a compatible PSU?
  

  Finally, I intend to switch on the case and motherboard and all simply transfer on the parties but that is further down the road.

  Thanks in advance!

  nefastusaequitas

  Generic standard ATX power supply can be installed, with a power of 20 + 4 pin main motherboard, or 24 pins as the XPS 8300 has a rear panel open, with or without the on/off switch.

  You should be able to buy a compatible power supply either a local computer or online store.

  Note: A power supply with four SATA power connectors, is necessary.

  Bev.

• HP Pavilion 500-164: the upgrade of the graphics card and power supply on a HP Pavilion 500-164

  I'll be upgrading my HP pavilions integrated HD graphics 8570 D a STRIX ASUS GeForce GTX overclocked 2 GB DDR5 128 - bit DisplayPort HDMI 1 750TI. 4 a/DVI-I graphics card. With that I also improve my diet to a Thermaltake TR2 500W 240 pins power power TR-500. I was wondering if it of ok to do on the computer and will not damage it. It is extra steps when I install these. Initially, I got the PC with windows 8 but have upgraded to windows 10.

  Hello

  If the ASUS 750 TI requires a 6-pin auxiliary power connector and your computer is running a version of HP 8 BIOS then you should be OK.  Open your PC and measure to make sure that graphics card fits.  In addition, open the command RUN and enter: MSINFO32

  Your computer is running a version of HP 8 BIOS?  If so, and if it is possible to install the graphics card then go ahead. Find out what the return policy is before you buy.

  Thanks for posting on the forum.

• I need help to find the drivers of Windows XP Home for my Equium M50-216

  Hello

  I did a full install of windows xp professional on top of windows xp home and now I am missing some drivers who im hard to get the drivers that I need are for the Toshiba Equium M50-216

  mass storage controller
  network controller
  Ethernet controller
  video controller
  video controller (vga compatible)

  I'd be really great guy if you could tell me exactly what im of drivers who need to choose :))

  Drivers Windows XP Home edition, you can find on http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp
  On this page under product Type, choose the option ARCHIVE and then your laptop model.

  I checked and are there drivers for Windows XP Home edition. Please download the installation instructions document too and install all the stuff after this installation order. It is very important to install the drivers, tools and utilities in the correct installation order.

• No video after having replaced the graphics card and power supply

  I have a desktop HP Pavilion m9515y PC. The graphics card that came with it (NVidia GeForce 9600 GS, 768 MB) did not suit the minimum specification required by a game that I played. Things in the game has been very slow - I could see a delay of s ~0.5 to move my mouse on the splash screen for the game.

  Today, I bought a new graphics (NVidia Geforce GTX 550Ti, 1 GB) card and a Corsair 700W PSU to replace the 350W one that came with the system.

  From the outset that I messed up something. It's been a while since I opened the box and I thought wrongly that the top panel (with the rubber surface) to come off before the side panel could be deleted. I removed the two screws now the top panel in place and slipped it in the process it disconnect and two thin black wires which I do not know the function. It was attached near the power button and one was attached to the rear of the Panel. The sons have stripped the ends rather than a connector of some sort and I don't know how they connect back or if they are the cause of the problem that I see now.

  In any case, I advanced and removed the old PSU and video card and replace them with the new. Two of them are significantly larger than the components, they replaced, but they managed to adapt with some maneuvers. All cards are well-placed in the PCI slots.

  The power is connected hard disk, DVD drive, the motherboard and the new video card. I'm not aware of any other connections that need to be made to food. There was not much clearance between the power supply and the back of the DVD player, but I was able to get the data and clinging to the DVD of power cables.

  After having done all that, I hooked my monitor DVI cable, plugged in the power cable and turned on the power. When I plug it in, the power button on the top of the tower is illuminated and the power seems to work. However, my monitor indicates that there is no video signal. I tried to put the old return video card, but I don't always have a video signal. Because I can't get a video signal, I can't tell if the PC is start or not.

  Does anyone know the purpose of the wires that were connected to the top of the Tower?

  They would cause they cause this problem if they are not correctly connected?
  Any suggestions for the possible causes of the absence of a signal from a video card?

  I just took the PC to a repair shop and it turns out that the problem was quite simple: I don't have the PCU power cable 4 pins hanging. Everything seems to start fine when we hung out at the shop. Fortunately, the place that I took did not even charge me what as they don't charge co-pays and since it is such a simple fix.

  Now I feel kind of stupid, but I know better next time...

• Questions about the replacement of a power supply for a P7-1235

  I decided to do an update on my Pavilion P7-1235. I put in a graphics card and put in power level. After doing some research on this forum and others I know well enough that I need. The only question I have is about the food. I don't know what the original power supply. There is a vent on the side where it however. So I guess that there is a fan on this side of the power supply. This eating plan I get:

  http://www.Newegg.com/product/product.aspx?item=N82E16817139050 & TPK = % 20500% 20% 20modular %2 watt Corsair...

  I noticed that the fan is on top? Now there is no high ventilation in my P7-1235, I worry for nothing? I think that all the supplys to look the same. What is the top of the fan page for? Or can anyone suggest a replacement perfect for my exact Pavilion model?

  Sorry if the questions are stupid, but I'm still learning and want to do what I can myself!

  Hello

  Yes, you can use the power supply the same way. The image is in a vertical position for the convience of the buyer. I have the same with number of power supplies and it was fine. You can check the following links people have set up exact POWER supply in different ways.

  http://pcpartpicker.com/builds/by_part/Corsair-power-supply-cx500m

  However, please be aware of your power supply size and your case. If you have all materials/components in stock for your computer, then it is what it is;

  ATX case:

  : Height 39.4 (15.55 inches)

  Width: 17.5 cm (6.89 in)

  Depth: 40.9 cm (16,14 inches)

  PSU stock:

  (5.9 x 5.5 x 3.4 inches)

  And the power supply you want;

  Corsair size;

  "5.9"x 3.4"x 6.3"

  As you can see the length of the Corsair is considerably larger than your stock of power supply. This could hampor of air or could even make it so the holes of the PSU and the case does not match. However, this is usually not what worry. The height and width that should be worried because the length rarely causes problems, I wanted to just make sure that you knew in advance.

  Take advantage of your power supply; Corsair is a great brand.

• Need help/advice on the creation of custom character Style

  Hello comrades!

  I m doing a game using flash cs5 and HAVE 3.0.

  I want to give the player the option to costumize his character.

  Something like this ( http://www.flashninjaclan.com/zzz2832_Anime_Character_Generator.php ).

  After choosing his own style the player will save his character and he will use throughout the game.

  I had planned use drag - move action: Player f.ex.the is drag air style and drop it off at the head of the character.

  However, I n ' t´know how can I save the final result! I have not found a tutorial or document on this subject!

  Could you give me some advice/links?

  Thanks in advance!

  See you soon,.

  Eduardo

  You have 3 options here.

  I'll go from easy to hard:

  1. use a LocalSharedObject to record users decision like a flash, like this cookie the next time it runs your application the character will be always available

  or

  2. save the character under a beautiful string in a database that the user must connect when he starts the game.

  or

  3. use air instead of Flash, then you can write a file with the description of the character that it models to your site amenities AIR application directory

  The first method is by far the easiest.

  Regarding 'how to save the character', using a string representation.

  1st digit could be what he chooses, 2nd tshirt, 3 shoes, 4th wepon etc.

  For example, when he chooses the 4th head, the tshirt of the 7th, 9th place and the 3rd weapon, save "4793' in your local shared object chain and read it on the next time the user starts the application.