Need help: BSOD - NETwsw00.sys

Similar Questions

• Need help on IOPort.sys driver

  I need to open a program for the school, which requires a driver of IOPort.sys, and the error message indicates that it has not been copied in the system32 folder. I can't find one of these things on my computer. I want to know how to download the driver. I tried searching on google and I can't find anything. I could use all the help I can get.

  Hello

  Contact the program manufacturer support for further assistance on the issue, since the problem is specific to the program.

  Thank you and best regards.

• Help! I always get BSOD ndis.sys thanks! D:

  Hello, I want to know why is ndis.sys is still problematic.  I also did a different post, but apparently not solving my BSOD problem.  I've updated everything, I have no viruses (I free Malwarebytes, Spybot Search and Destroy for free, Microsoft Security Essentials, Super anti-Spyware free, and other useful tools such as adwcleaner, JKR, TDSSkiller and Hitman pro just in case and I put these tools in my USB) I don't think I need to manually update my Realtek network driver because I chose the option of windows check the update through the internet and it says that windows already has the correct driver for windows and I don't know if I have to manually install the driver myself.  I went on my site of manufacture (gateway) that uses drivers for my computer and I downloaded the Realtek but do not know if I need to install the driver because I need help, and here is a picture of my netbook card, just in case you need to know:

  

  Oh and I'm using a custom theme for Windows XP that I had at Deviantart.  Suffice to say.  So, can anyone help me in this situation of BSOD?  I have also Ubuntu 14.04 as my second OS in the same machine and I don't think it's causing this problem because I had this kind of problem before I even put Ubuntu on my machine.  And I also downloaded BlueScreenView to see if I can fix it myself, but I'm having a little trouble trying to understand what he's trying to tell me.  And anyway, that's what BSV is when I put it to display under Windows XP BSOD (I select the minidump BSOD in which occur today):

  A problem has been detected and Windows has been shut down to avoid damage
  on your computer.

  The problem seems to be caused by the following file: ndis.sys

  SYSTEM_THREAD_EXCEPTION_NOT_HANDLED

  If this is the first time you've seen this stop error screen,
  Restart your computer. If this screen appears again, follow
  the following steps:

  Check to make sure any new hardware or software is installed correctly.
  If this is a new installation, ask your hardware manufacturer or software
  the Windows updates, you might need.

  If problems continue, disable or remove any newly installed hardware
  or software. Disable the BIOS memory options such as implementing caching or shading.
  If you need to use safe mode to remove or disable components, restart
  your computer, press F8 to select Advanced Startup Options and then
  select Safe Mode.

  Technical information:

  STOP: 0X1000007E (0XC0000005, 0X87C8A88E, 0X88A7FB4C, 0X88A7F730)

  NDIS.sys - address 0x87c8a88e base at 0x87c2f000 DateStamp 0x5034f1da

  And here is a picture of the BSOD I got (it is obsolete, but I'm sure it's the same thing I had today):

  

  I can't seem to find the answer, and I don't know how to solve this problem, please help me!

  Here's my crash report on the element which are red in MDL:

  http://1drv.Ms/1p7yyuA

  get my mini dumps here, please and thank you:

  https://onedrive.live.com/redir?RESID=11FEE6842B6018B8%21140

  Nevermind, I never got a BSOD because I upgraded my RAM, thanks for the help by the way :)

• Need help with the blue screen issue "NAVEXI5. SYS, PAGE_FAULT_IN_NONPAGED_AREA ".

  Original title: need help with the blue screen issue
  My computer turns saying a blue screen: a problem has been detected and windows were shut down to prevent damage. The problem seems to be caused by the following file: NAVEXI5. SYS PAGE_FAULT_IN_NONPAGED_AREA he seems to have a different error whenever he turns to a blue screen. Can someone help me please.

  Hello
  

  1. Since when are you facing this problem?
  2. you remember to make changes to the system?
  3. do you get an error with this error code?

  I suggest to unplug external devices such as printer, scanner, etc. that are plugged into the system, and then restart the system and check if the problem persists.

  Method 1.
  I suggest you to do a check disk from the recovery console and check if the problem is resolved. Follow the steps mentioned below.
  a. start into the recovery console using the XP CD. Follow the steps mentioned in the article below.
  Description of the Windows XP Recovery Console for advanced users
  http://support.Microsoft.com/kb/314058
  b. perform a disk check.
  How to perform disk error checking in Windows XP
  http://support.Microsoft.com/kb/315265

  Method 2.
  I suggest you to start with the XP CD and then do a system restore. Follow the steps mentioned in the article below.
  How do I recover from a corrupted registry that prevents Windows XP startup
  http://support.Microsoft.com/kb/307545

  I hope this helps.

• Need help with screen Blus of death (BSOD) on my computer toshiba laptop

  Hello all, Ive had a little last week, or problems with my laptop. While playing a game (minecraft), I would randomly have a BSOD error and my laptop will re-start. Initially, I gave it no thought, but when it happened again, I decided to try to do a little research, but I'm not terrible with technology and other then I'm neither the case with my own research.

  If someone could point me in the direction of a few possible ways to get this problem.

  guys do you propose I make to the store and see if they can check it out, what would I need if I did.

  I got a program to read some sort of file "dump" made when occurs a BSOD, I publish what this program here says? the program is BlueScreenView, if yes, what I have post the spectator thing? There are has 2 main screens on it, SDO as Sho different dump files (which is on the top) and on the bottom, it lists the names of different files for each dump file I think that some of them highlighted.

  im not this product with tech so I don't know much but I need to post anything on my laptop or any information of the dumpfile and would have this info help in any way to determine the problem? just tell me what I have to post and ill get the information displayed in a response, thank you.

  -leoknighted

  PS: I don't think that playing minecraft is the cause of the BSOD and crashing, but I only get it when playing minecraft, so I don't know if minecraft is causing accidents and others. I watch videos and this all the time and I never have an accident. I'll try and play a different game and see if this causes my laptop down and the cause is perhaps high usuage to my laptop, as I've said games require a lot of power of a laptop/computer, if they are not the 'best' laptop for games. but yh, if someone thinks they can help me and need some information please tell me so I can get it for you. If you guys think it would be best to get a professional to look just mylaptop say, however im save as a last resort.

  Hello

  I suggest you to refer to this article to check if this help.

   

  Resolve stop (blue screen) error in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  Important: System Restore will return all system files not as documents, email, music, etc., to a previous state. These files of types are completely affected by the restoration of the system. If it was your intention with this tool to recover a deleted file to non-system, try using a file instead of system restore recovery program.

   

  Important: while performing the check disk on the hard disk, if bad sectors can be found, then check disk will try to repair this sector. All the data available in this area may be lost.

   

  Custom installation WARNING: If you format the hard disk during the installation, the data files are saved in a Windows.old folder on the partition you installed Windows 7.  However, you should always back up the files. If you have encrypted data files, you may not be able to access them after installing Windows 7. If you have backed up your data files and then restored after Windows 7 is installed, you can delete the Windows.old folder.

  Let us know if you need help with this question, we will be happy to offer you our help.

• Help help BSOD on startup

  Hi guys, I'm having a huge problem here. In the last 3 days I got a BSOD on startup. I can start on the desktop, but less than 2 minutes, BSOD.

  The message indicates a driver in the kernel stack is trying to corrupt the system. He said Stop: 0x000000c4 (0 x 0000000000000091., "Windows has recovered from an unexpected shutdown" gives C:Windows\minidump\070515.18392-01.dmp

  C:Users\RassRas\AppData\Local\Temp\WER-73616-0.SysData.XML

  in the form of files that describe the problem.

  Only, I can start safe mode. However when I do the block driver files list at classpnp.sys for at least 30 seconds. before continuing on the desktop. What should I do? I really need help.

  Unless there is a reason you run the driver verifier you should disable by typing auditor/reset in an elevated command prompt.  Auditor of may be the cause of the problem.  37 of the 50 BSOD were related to the auditor running and there was no clear underlying (and unifying) cause.

  Blocking it also does not work in safe mode because the auditor is disabled in safe mode.

  I would also like to launch malwarebytes

  Please download the free version of Malwarebytes.
  Update immediately.
  Do a full scan of the system
  Let us know the results at the end.

  http://www.Malwarebytes.org/products

• BSOD - usbhub.sys

  Hello!

  I bought a g505s and I have upgraded to Windows 8.1. Sometimes I get bsod usbhub.sys related.

  Here is my production of windbg:

  Microsoft (R) Windows debug 6.3.9600.16384 AMD64 Version
  
  Copyright (c) Microsoft Corporation. All rights reserved.
  
  Loading dump file [C:\Windows\MEMORY. DMP]
  
  The Bitmap core dump file: the single kernel address space is available
  Symbol of validation of the path summary *.
  
  Response                         time (ms)     location
  
  Report                                       srv*c:\symbols*msdl.microsoft.com/download/symbols
  
  Symbol search path is: srv*c:\symbols*msdl.microsoft.com/download/symbols
  
  Executable search path is:
  
  Windows 8 Kernel Version 9600 MP (4 procs) free x 64
  
  Product: WinNt, suite: TerminalServer SingleUserTS
  
  By: 9600.16452.amd64fre.winblue_gdr.131030 - 1505
  
  Computer name:
  
  Core = 0xfffff801 'e121c000 PsLoadedModuleList = 0xfffff801' e14e0990
  
  The debugging session: Sun Jan  5 2014 12:09:45.020 (UTC + 02:00)
  
  System Uptime: 2 days 1:33:11.375
  
  Loading the kernel symbols
  
  ...............................................................
  
  ................................................................
  
  ............................................
  
  Loading user symbols
  Loading unloaded module list
  
  ....................................
  
  *******************************************************************************
  
  *                                                                             *
  
  *                        Bugcheck analysis                                    *.
  
  *                                                                             *
  
  *******************************************************************************
  Use! analyze - v to obtain detailed debugging information.
  9F error checking, {3, ffffe00002dc8060, fffff801e2be3840, ffffe0000276eb80}
  Probably caused by: usbhub.sys
  Follow-up: MachineOwner
  
  ---------
  0: kd >! analyze - v
  
  *******************************************************************************
  
  *                                                                             *
  
  *                        Bugcheck analysis                                    *.
  
  *                                                                             *
  
  *******************************************************************************
  DRIVER_POWER_STATE_FAILURE (9f)
  
  A pilot was not a power of the PRI ends in a moment.
  
  Arguments:
  
  Arg1: 0000000000000003, a device object has been blocking an Irp for too long
  
  Arg2: ffffe00002dc8060, physical device from the stack object
  
  Arg3: fffff801e2be3840, nt! TRIAGE_9F_POWER on Win7 and higher, otherwise the functional device object of the stack
  
  Arg4: ffffe0000276eb80, blocked IRP
  Debugging information:
  
  ------------------
  DRVPOWERSTATE_SUBCODE:  3
  Nom_image:  usbhub.sys
  DEBUG_FLR_IMAGE_TIMESTAMP:  5215f839
  MODULE_NAME: usbhub
  FAULTING_MODULE: fffff8000300f000 usbhub
  DEFAULT_BUCKET_ID:  WIN8_DRIVER_FAULT
  BUGCHECK_STR:  0x9F
  Nom_processus:  System
  CURRENT_IRQL:  2
  ANALYSIS_VERSION: 6.3.9600.16384 (debuggers (dbg). 130821-1623) amd64fre
  DPC_STACK_BASE:  FFFFF801E2BEBFB0
  STACK_TEXT:
  
  fffff801 'e2be3808 fffff801' e14131a6: 00000000' 0000009f 00000000'00000003 ffffe000 '02dc8060 fffff801' e2be3840: nt! KeBugCheckEx
  
  ' fffff801 'e2be3810 fffff801' e14130c6: ffffe000 ' 07968650 00000000' e9f181f0 00000000 00000003' fffff801 ' e1278a04: nt! PopIrpWatchdogBugcheck + 0xde
  
  ' fffff801 'e2be3870 fffff801' e12c9f64: ffffe000 ' 07968688 fffff801 ' e2be3939 ffffe000'079686 c 8 00000000'00000002: nt! PopIrpWatchdog + 0x32
  
  ' fffff801 'e2be38c0 fffff801' e12ca478: 00000000 ' 00000001 ffffe000 ' a 0238, 748 fffff801 'e150a180 fffff801' e150e0c0: nt! KiProcessExpiredTimerList + 0x1d8
  
  fffff801 'e2be39a0 fffff801' e1326478: fffff801 'e150a180 00000000' 001f3bea 00000000' 0067 d 662 00000000' 0067d67a: nt! KiExpireTimerTable + 0 x 218
  
  ' fffff801 'e2be3a40 fffff801' e1276abc: ffffe000 00000000' 00001f80 ' 0000019f 00000001 ' 598dfbd6 00000000'00000002: nt! KiTimerExpiration + 0 x 148
  
  fffff801 'e2be3af0 fffff801' e136d7ea: fffff801'e150a180 fffff801 'e150a180 00000000' 001a3fc0 fffff801' e1562a80: nt! KiRetireDpcList + 0x19c

  
  fffff801'e2be3c60 00000000' 00000000: fffff801 'e2be4000 fffff801' e2bdd000 00000000'00000000 00000000'00000000: nt! KiIdleLoop + 0x5a

  STACK_COMMAND: kb

  FOLLOWUP_NAME: MachineOwner

  IMAGE_VERSION: 6.3.9600.16384

  FAILURE_BUCKET_ID: 0x9F_3_btfilter_IMAGE_usbhub.sys

  BUCKET_ID: 0x9F_3_btfilter_IMAGE_usbhub.sys

  ANALYSIS_SOURCE: KM

  FAILURE_ID_HASH_STRING: km:0x9f_3_btfilter_image_usbhub.sys

  FAILURE_ID_HASH: {e32271a1-eb13-6913-1626-4c8d704b5d5a}

  Follow-up: MachineOwner
  ---------

  Any advance-help would be appreciated.

  Thank you

  I'll try to reinstall my bluetooth drivers...

• Fs9 not opening - identified problem but need help repair

  I want to thank you in advance for your time. I am trying to install and play flight sim 2004 on windows 7 - a x 64 sys - and when I open fs9.exe splash screen or anything really fails to display.

  I think that is the problem, is that there is no record of FS9, under the %appdata%\Windows\ that basically, I need help trying to solve. Is there anything I can download to replace this file? Or am I just looking in the wrong place.

  Also, I installed it in a different directory, not the directory Program Files (x 86) but rather just C:\FlightSim\

  Hi Jordan,.

  The game does not appear to be installed according to the description of your problem.

  I suggest you log in as administrator or right click on fs9.exe file and run as administrator.

  I think that this is precisely the reason why the FS9 folder does not appear in c:\users\explore \appdata\local\Microsoft\windows\game.

  If this does not work, I suggest that you look into other aspects as well. Follow the steps below.

  Method 1:

  Update display drivers . The flash on the screen could also be because the display drivers are not updated. I would recommend you visit the manufacturer, download and install the latest display drivers for windows 7.

  Method 2:

  I suggest to disable UAC and then try to install the game.

  Note: User Account Control (UAC) can help prevent your computer from unauthorized changes. UAC notifies you when changes will be made to your computer that require administrator-level permissions. These types of changes can affect the security of your computer or can affect settings for other people who use the computer. We recommend that you leave UAC to help your computer course.

  Method 3:

  Temporarily disable all security software and try to install.
   
  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off
   
  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software
   
  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  If the problem persists, then I suggest that you post the question in the Microsoft Flight Simulator Games Forum for further assistance.

  http://www.fsinsider.com/

  FOR INFO:

  Flight Simulator 2004: Known video issues
  http://support.Microsoft.com/kb/823628

  Aziz Nadeem - Microsoft Support
  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Infected Winlogon.exe and explorer.exe accidentally deleted on XP Pro PC - need help from recovery console

  Hello

  Windows XP Pro SP3 Dell Optiplex and been infected by Trojan in winlogon exe files and Explorer. AVG asked me if I wanted to force deletion and I foolishly agreed. Now, I get the BSOD and the message 'Windows logon done unexpectedly '.   It is a work PC and the CD only we have is the Dell CD to re - install and I know that I need as the first step recovery console. I don't know if the recovery console is on it, and then I need help for the uncomprressed explorer.ex_ and winlogon.ex_ and in their right place.

  I'm not a total newbie, but it's been some time that I used the recovery console.

  Help?  Thanks in advance and greetings to all

  Morey

  Try to be more specific with the error messages you see, so it does not guess or try things.

  Here is an example of a popular error message that sounds like yours (maybe):

  STOP: c000021a {fatal system error}
  The Windows logon process ended unexpectedly with the status of 0xc0000034 (0 x 0000000 0000000 x 0).
  The system has been shut down.

  What exactly tell your message?

  There should be copies of XP system files backup all critical already on your hard drive in the windows\system32\dllcache folder (it is this case), you may not need any expansion.

  I would like to see the exact error message, make a CD bootable Recovery Console, run chkdsk/r even if he doesn't find anything to do and then see the replacement of missing persons or suspicious files, either by copying it in the backup copies of replacement of the recovery, or from another CD Console, you can do if the Recovery Console gives you a hard time (first do the CD Recovery Console).

  First of all, you need to start on something...

  You can do a restore bootable XP CD as follows:

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

  This is not the same as recovery disks that may have come to a store to purchase the system.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the command prompt.

  Start by checking the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Do, or do not. There is no test.

  I decided to implement the points for a new puppy instead of a pony!

• Need help to install on win xp SP2, hp 8300 elite raid drivers?

  I spent to win 7 on HP elite 8300 for win xp sp2. I did this because I had to install a specific software that only works on Windows xp sp2. And now I have the problem with the raid drivers. I need help how to install them, and I don't know if I downloaded the right one.

  Maybe the only solution is to insert sort this driver in the instalation of win xp cd because I don't have floppy drive.

  HP elite 8300

  SERIES:[personal information]

  PRODCT NO.: B0F31EA #AKQ

  Hello:

  Please read the info on the link below on how to integrate the SATA/RAID drivers.  Read the Intel section and read the document about how to integrate all the drivers.

  http://h30434.www3.HP.com/T5/notebook-operating-systems-e-g-Windows-8-and-software/SATA-drivers-for-XP-solution-on-0x0000007B-BSOD/m-p/114120#M17758

  The drivers from the link below allows you to integrate. Second listed file is what you need for XP 32 bit.

  http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=21730&ProdId=2101&lang=eng&OSVersion=Windows%20XP%20 * & DownloadType=.

  The real driver you need is the controller RAID Intel® Express Chipset SATA Desktop/Workstation/Server. But all by wake.

• Installation of Windows XP tells me that I need the file "igxpmp32.sys.

  I install windows xp on a laptop given to new, I bought because I just couldn't connect on it.

  During the installation it stops and tells me I need the file 'igxpmp32.sys' I seek but can't find. Help, please

  original title: how to find "igxpmp32.sys.

  Hello, Tona,

  Igxpmp32.sys file is located in the folder C:\Windows\System32\drivers.  This is the accelerated Intel graphics drivers.  Try Intel.com.

  http://www.Intel.com/content/www/us/en/search.html?keyword=+igxpmp32.sys

  You can also find the rom installation.

• BSOD iusb3xhc.sys

  Greetings! I have problem with my pc im getting random BSOD iusb3xhc.sys. I think it all started when I updated some drivers using extra driver. I got about 3 or 4 BSOD randomly this sort relating in particular to iusb3xhc.sys everything. I run sfc/scannow, and she reported that it fixed a problem .i run it again 3 times and no problems have been detected and I thought that everything was going well so far.
  I have a win 7 ultimate 64-bit service pack 1
  Core i3 of intel 4160
  RAM Kingston kvr 4 x 2 8 GB
  motherboard Asus b85m g
  660 GTX video card
  160 GB of disk velociraptor hard disk OS and 500 GB samsung spinpoint f3 as storage device
  Corsair vs650 650watts PSU.

  Here's the last minidump file:
  http://1drv.Ms/1JdcgRN

  Hello

  Apologize for the delayed response. It seems that this problem started after the installation of the Booster driver in the computer. These applications are known to cause damages instead of being useful to the computer. Did you uninstall the software from the computer? If this isn't the case, I suggest you uninstall the same and check if still have problems you.

  See the following article to troubleshoot BSOD:

  http://Windows.Microsoft.com/en-in/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  Please make sure that your computer is virus-free by running a full scan using the Microsoft Safety Scanner. No doubt these files were created by viruses.

  Note: The files infected by viruses will be deleted and so there is a chance of data loss.

  Please be sure to download and install the latest drivers for your card display and Chipset graphics and motherboard from the manufacturer's website. Also check the updates of the firmware or the BIOS and install it as well.

  Come back for additional help.

• Several VSS writers fail and my backups are failling too. Need help!

  Several VSS writers fail and my backups are failling too. Need help:

  I have a desltop installed SP3 x 64 XP and a laptop with seven x 64 SP1. In both the machine that my backups fail. I'm trying to back up data by using boats to storage, backup Windows also is failling. I'm taking a full backup on a USB external drive (2 TB).

  I did "vssadmin list writers" and showing several writers are in the failed State.

  I've done SFC/scannow, it did not help. There is no error in the disk and Chkdsk.

  I don't know how VSS works and how to solve the problem. Help, please!

  A lot of people told me they found this informative article. That's why I upgraded that and display back again.

  -------------------------------------------------------

  Before you stat is working on this issue make sure that the volumes have no system disk/file error. Run Chkdsk and ensure.

  (1) in the case of a failure of backup/writer, we first check the drivers associated with the VSS backup.

  These drivers are:

  VOLSNAP. SYS

  NTFS. SYS

  SWPRV. DLL

  -Check the version of above mentioned MS 3 files and update using MS Hotfix.

  If we have installed other suppliers, who might be the supplier of StorageCraft, Symantec suppliers and suppliers of Acronis, he must ensure that their files are also updated.

  Note: You can see the list of suppliers using this command: VSSADMIN LIST PROVIDERS

  Some of the DRIVERS PROVIDER commonly find are:

  stcvsm.sys

  symsnap.sys

  snapman.sys

  (2) this step is performed only when we find him

  VSS writers in a failed State. If we find the stable writers and backups still fail, or we get errors, do not perform this step if you please.

  In this case, the VSS writers fail, we can delete the following registry key, after of course saving and restart the server.

  HKLM/Software/Microsoft/EventSystem/{26c.../Subscriptions.

  This key will be automatically recreated when you restart and writers should return to the stable state.

  The writers pending the completion status is not a problem. It's also good that Stable.

  We can do on the Server 2003, 2008 and 2008 R2 OS as well.

  However, in Windows Server 2003, after you delete and restart the "vssadmin list writers" server cannot display all the writers, in this case must register the dll:

  For a list of the dll files to register, please check KB: http://support.microsoft.com/kb/940184

  Note: The reinstatement of dll in Windows Vista/2008 and especially is NOT recommended.

  (3) if we have only one / specificwriter (s) in a State of failure, which would always be SQL, EXchange, IIS or NTDS, then we have need to revive their respective service Console of service.

  If they fail repeatedly, then make sure that the application and its components are updated. See their respective engineers immediately. Make sure that the latest service packs and patches are installed.

  (4) make the foregoing, resolves generally 80 to 90% of the questions. If we believe that the issue is occurring, or we have VSS event errors, it may be the providers, the origin of the problem. If the creation of the snapshot does not properly, it can affect writers and other components involved.

  Please check providers using "vssadmin list providers. If we find any other provider, other than the Microsoft software shadow copy provider, we have to remove from the list.

  To do this: start the registry editor.

  HKLM/System/CurrentControlSet/Services/VSS/suppliers/GUID.

  One GUID would be for Microsoft Software Shadow Copy provider. The other GUID would be for other providers such as StorageCraft. We will save the GUID, and then delete it. Then restart the machine.

  Now when we do vssadmin list providers, we will see only the default Microsoft provider.

  I have seen in many cases where our supplier of StorageCraft may not work properly and continue of not not the authors. In such

  case, if we get rid of the supplier, then the issue is resolved and not re occurs.

  -However this would impede the functionality of StoaregCraft or any other similar to this backup software.

  That's why to engage respective software tech support for further assistance.

  (5) If a shadow copy is enabled on the volume, make sure that the storage area is set to the default location.

  For example:

  If we take a snapshot of C: then the storage area should be C:

  We are changing that, if we do not have enough free space (at least 300 MB) free.

  We can click with the right button on the volume, goto the cliché tab and change it accordingly.

  Also note that the minimum value of the storage area should be 300 MB and maximum can be 3000 MB.

  We can also set any value between the two, which is a multiple of 300, 600, 900, 1200, 1500 etc... According to the available space.

  In the cases where errors in the event viewer on wait times (event id: 12298, 12310, 2004, 12290) then we also need to put the MinDiffArea in the registry.

  HKLM/System/CurrentControlSet/Services/Volsnap

  Right side, new DWORD VALUE - "MinDiffAreaFileSize" - change and set the value between "300-3000 Mo" or any multiple

  300 between the two. Ideally, we can define it on 3000 MB which works even better if we have space.

  Ref: http://support.microsoft.com/kb/826936

  (6) also, please make sure we have plenty of free space. If we go by the book, a snapshot requires at least 10% of the volume

  to be free.

  Storage controllers (SCSI/RAID controllers) could also be a problem and may need to be updated.

• Autoruns.exe serious problem, need help urgent please

  Hi, someone there is familiar with this software from sysinternals? Have accidentally disabled key drivers in my laptop with this software and cannot run again. Anyone know how to reverse the errors using this application? Posted full problem in the recovery and repair forum. Have had no response from sys internals forum and really need help. Thank you, Jay

  Try to reactivate the drivers tab drivers doesn't work, so did system restore. Thanks to all who responded, the problem is solved

• I need help interpreting minidump Win7

  I have a minidump I need help interpretation.  It can be found here https://skydrive.live.com/redir?resid=EE6D10348E0AEC12! 10623 & authkey =! ALEibmza8JSN01k

  I am running Win7 Pro 32 bit dual boot with XP.  I have not installed any new devices or applications.  I checked Windows update to make sure that I'm updating of drivers and patches. I've only got this blue screen once shot but not only I want to be ready in case I get it again, I would also like to better understand how to interpret these landfills.  I love to learn these things myself rather than having to rely on nice people like you all the time to get out me of trouble. I tried to do some reading, but I have to admit that I think it's a little over my head. I'm confused, if I need to use Dumpchk.exe, the WinDbg tool or the KD.exe tool.  All these tools are doing the same thing or do I all?  Will be the same debugging XP tool dumps as well as Win7 those?  This particular blue screen was in Windows 7. Thanks for any idea that you could give me.

  You have a hardware problem, causes;

  ReadyBoost (rdyboost.sys)

  See also this previous thread

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/blue-screen-on-startup-with-rdyboostsys-as-cause/299d50d1-e84d-E011-8dfc-68b599b31bf5?msgId=3668231b-C74E-E011-8dfc-68b599b31bf5