need help choosing a gpu for memphis-s MB

Similar Questions

• New generation. Need help choosing a GPU

  New system is based on:

  I7 5960 x

  32 GB of ram

  SSD 240 GB for cache (AE and PremierePro)

  2 x 1 TR hard drives in RAID 0

  3 rpm hard drive for storage

  I am deciding what GPU to get. My budget is $ 400. GTX 970 seems a good choice, but I don't know if there is really no difference in performance between 970 and cheaper nVidia GPU, AE and creation are mostly powered CPU.

  It should be noted I'll buy the item 3D v2 for AE as well.

  Any advice would be much appreciated.

  AE is for most CPU power but first and SOUL use the GPU for many almost non-stop processes. The GPU has important implications for the first and SOUL. I suggest the 970GTX at this point, especially since it is in your budget.

  Eric

  ADK

• CQ61-313us: maestro also needing help code is 75957252 for the bios password reset

  Maestro also needing help code is 75957252 for the bios password reset

  Check your other post. I answered here.

• Hey guys, ive tryied buy photoshop like a hundret times, ive typed in my information payment and everything I need, went on the button pay on the accept button but nothing happened, I need help pls passing sry for my language

  Hey guys, ive tryied buy photoshop like a hundret times, ive typed in my information payment and everything I need, went on the button pay on the accept button but nothing happened, I need help pls passing sry for my language

  Contact adobe during the time pst support by clicking here and, when available, click on "still need help," http://helpx.adobe.com/x-productkb/global/service-ccm.html

• Alienware m17x GPU R4 fried, need help in the search for replacement

  My M17x wouldn't turn on last week, so I took it to a computer repair center, and told me my GPU is fried, it's an Nvidia Geforce 675 m.  The told me to order a new and they would install it for me, after about 3 hours of scouring the internet for help, I could not find any Web site I am sure that sells any GPU for laptops.  I read a post earlier to buy the Detroit form alienware, or buy an aftermarket GPU for this, but I couldn't find one or the other.  Where can I buy the same GPU, or an upgrade that would always work in my laptop?

  http://www.eBay.co.UK/SCH/i.html?_odkw=675m&_FROM=R40&_osacat=0&_FROM=R40&_trksid=p2045573.M570.L1313.TR2.TRC1.A0.H0.XGTX+675m&_nkw=GTX+675m&_sacat=0

• Need help to download files for the old order since October 2004

  I have a very old order for a font that I want to re - upload the files, but the order does not appear under my account information. Is there a way I can still access my files?

  Order date: October 29, 2004 04:56 PDT

  Order number: PON1267F24A

  Thank you

  -Brad Turner

  I doubt you'll have much luck due to the lack of support for old products, but try to support customer:

  To the link below, click on the still need help? the option in the blue box below and choose the option to chat...

  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If it fails to connect, try to use another browser.

  Get help from cat with orders, refunds and exchanges (non - CC)

  http://helpx.Adobe.com/x-productkb/global/service-b.html ( http://adobe.ly/1d3k3a5 )

• I need help, open my NAT for an xbox 360 on a WRT160N v3

  Hey guys. I just got a new wrt160N v3 and I need help on opening the NAT. I use to have the wrt160N v2 but I replaced it. so can you guys please help me. Thank you

  Okay I found the solution myself. Here's what you do:

  Open a Web browser and type your default gateway which is usually: 192.168.1.1

  After you do this type in as the admin and the password admin its also admin once you open a session go in application and games and go to the subcategory "port range forwarding."

  For the first set appliction Xbox1 and the beginning and the end, the port numbers are 88. The Protocol is both and the IP address must end at 120.

  For the second application updated Xbox2 and the beginning and the end, the port numbers are 3074. The Protocol is both and the IP address must end at 120.

  For the third set appliction Xbox3 and the beginning and the end, the port numbers are 53. The Protocol is borh and IP address must end at 120.

  For the fourth request put Xbox4 and beginning and end, the port numbers are 80. The Protocol is both and the IP address must end at 120.

  Save the settings and once you go back to the installation page, make your size MTU 1364. Save the settings and then go to security and uncheck the anonymous internet requests to filter. Save the settings.

  Go to the administration tab, and then make sure that UPnP is enabled. If it is not, turn it on and save the settings.

  Tour of your router and the modem. Wait a minute and plug the modem first. Once it starts up plug in the router and your NAT must be open for xbox live.

• I am a photographer bigener need help on editing photos for competitions will be cloud help me?

  I'm a photographer bigener, need help with editing of photos for competitions, cloud will help me?

  Creative Cloud subscriptions include Lightroom and Photoshop, amongst the most widely used photo-editing programs.  But if you are looking for instructions on HOW to edit photos, there isn't really anything on the cloud to do.

• Need help installing replcaement motherboard for Dell E521. ! Help, please!

  Hello to all who can help you!   IM desprate need help to install my replacement motherboard. the original died after a bios udate. but I have no guarantee. I already served $ 130 for the replacement. I don't know my way around the motherboard, but I'm no expert. and I've never updated the whole motherboard. so, if someone canhelp. Give me a walk through or something. It would be grat! Thanks to anyone who can help! to have a Dell technician install it would cost about $130 I think. :(c'est 260 $ pour une carte mère de remplacement (pas nouveau im sûr que juste un refurb))

  
  

• Hi, I need help with installing updates for CS5

  Hi, I need help with the installation of the updates of CS5. I get the following message: some updates to installation failure. My product is already registered. Can someone help me, please?

  Erkan please download and apply updates directly from updates.

• I need help, choose the right diet for my HP Pavilion a1000

  Hello

  I need to replace my power supply on my HP Pavilion a1000.  The vehicle currently has the original (A Bestec model: ATX-300-12Z COR.)  HP P/N is 5188-2625.

  I found one on ebay that has the same numbers, but instead of the CDR, he told RFI.  I don't really know what that means.  The list is below.  Will this work?  If this isn't the case, could you give me a link that would work?

  Thanks for your help!

  http://www.eBay.com/ITM/not-noisy-replacement-PC-power-supply-fo-Bestec-ATX-300-12Z-DDR-HP-P-N-5188-...

  jimmycaps wrote:

  Hello

  I need to replace my power supply on my HP Pavilion a1000.  The vehicle currently has the original (A Bestec model: ATX-300-12Z COR.)  HP P/N is 5188-2625.

  I found one on ebay that has the same numbers, but instead of the CDR, he told RFI.  I don't really know what that means.  The list is below.  Will this work?  If this isn't the case, could you give me a link that would work?

  Thanks for your help!

  http://www.eBay.com/ITM/not-noisy-replacement-PC-power-supply-fo-Bestec-ATX-300-12Z-DDR-HP-P-N-5188-2625-/390514394289?PT=PCA_UPS&hash=item5aec78c4b1

  Hello

  Yes, the power supply will be ok. It is a desktop computer, so you don't have to use exactly the same power supply. It can be even more powerful, but be sure there is all compatible connectors. It seems that the version of the CDR is only 300W and the DDR 400 w. The connectors are the same...

  http://www.newpowersupply.com/bestec_atx_300_12z_cdr_300w_300w_24_pin_ps2_replacement_power_supply_p_n5188_2625_bulk-PR-11.html

• Need help choosing a new computer to run After Effects

  Hi all

  I waited to buy a desktop computer until I could set up something really good, but running After Effects on my laptop is not just cut it.  It slows down everything and when you try to use the feature plays only 6 frames per second. That being said, I need something that will give me better performance than my laptop but don't break the Bank.  (That way I can still move to a more desirable machine.)  I'm a noob when it comes to shopping for computers that go beyond the disk space and wifi, so I asked around, but honestly I'm more often conflicting opinions . I said the most important GPU, I said GPU is not serious at all.  It goes the same for the CPU.  I was also told that it's okay if I get something with integrated graphics on dedicated, etc.. This is where I hope you guys can help, since you actually understand the program I run.

  I would buy something already built, so I don't have to worry about what anyone screwing.  I've been thinking to get a desktop computer cheap off of ebay (as long as it will work better than my laptop) and then adding on it, but I don't know if it's the wiser decision.  All desktop computers can still be improved or they hit a point where they are worthless?

  Here are the specifications of my laptop:

  Windows 10 home

  Intel core i3 cpu M380 @ 2.53 GHZ

  4 GB of ram (3.80 GB usable)

  64 bit

  1 TB HARD disk drive

  Intel HD (internal) graphics with a total of 1696 MB graphic memory and 64 MB dedicated video memory

  
  

  Is there something out there that would be more fluid than my laptop, but for cheap AE?  Here are a few I've been Watch: Dell Optiplex 960 (3 GHz Quad Core Q9650 / 4 GB RAM / 160GB HDD)

  IBM Thinkcentre M58 PC Windows 7 Pro Desktop Core 2 Duo 3.0 GHz/8 GB / 250 GB HD with intergrated graphics

  A generation custom (with integrated graphics), including: Card mother Z87 - G41 / 8 GB RAM FURY HYPER / Gear solid 400w PSU / LG DVD PLAYER / INTEL PROCESSOR (3.2GHZ) G3258 / 240GB Sandisk Ultra II SSD / MSI cases

  
  

  And this one: AMD 4.2 Ghz Quad Core 8 GB RAM 1 TB Hdd/integre graphic.

  Thank you in advance for your help!

  
  

  
  

  
  

  For AE the only things that really affect performance are the cores, clock speed and memory.

  We must look at least an i7 quad core systems with hyper threading (6 or 8 core is much better, but more expensive) and at least 32 GB of memory. You must also at least two SSD, one for the OS, one media and projects. The video card is completely irrelevant for AE, any card $ 30 is sufficient.

  See Page Tweakers

• Need help creating tip Action for Navigation "Inside-the-same-slide" to let the user Play slide again

  I use 8 Captivate. It is a scenario of HTML5.

  I have need of a button which will allow the user to "replay" the slide. I don't want the button to take the user to the front, back, or do anything else. I want the button to start the slide at the beginning and play without interruption until the end.

  I am looking for help on how to do this using variables and advanced for HTML5 actions or, Alternatively, recommendations on the good tutorials for advanced actions. I prefer the tutorials that will allow me to start at the bottom. I was not able to find tutorials advanced action that assume no prior experience.

  I know that each new user must say this, and I'm afraid that's true for me too. If I can't create a HTML5 work quickly replay button, it will get me in trouble with the client.

  Try this:

  

  cpCmndGotoSlide is a system variable, which the index starts at 0. The variable cpInfoCurrentSlide system includes an index starting at 1. The reason for the subtraction in this Expression. You need to add continue because a tip action will not release the read head.

  Why choose Standard Simple action? -Captivate Blog

• Need help choosing system with PP CS4

  I am looking to upgrade my system... and like most, I have limits on what I have available. My current system simply takes long and cannot handle HD playback. It would be great if someone could help me to choose, tell me if you work or just give up and deal with what I got up to a total redesign is possible.

  My software is PP cs4 and the projects that I will be working on will include capturing SD and HD, but mostly HD. I'll edit and export to tape SD DV and DVD a few projects will require export in HD. Why I will not go in, I'm going to need to go with a DELL system and can only scrape up to about $1,500.

  With that... So here's what I'm looking at:

  PROCESSORS

  Intel® Core™ i7 - 920 processor (8 MB L3 Cache, 2.66 GHz)

  Operating system

  Genuine Windows® 7 Home Premium, 64 bit, English

  MEMORY

  9 GB DDR3 SDRAM memory to 1 066 MHz - 6 DIMMs

  HARD DRIVE

  750 GB SATA 7200 RPM hard drive

  or opt for the 1 TB RAID 0 performance (2-500GB SATA)

  I also have a couple externa 1 GB hard drives

  VIDEO CARD

  ATI Radeon HD 5450 1 GB DDR3

  or go for ATi Radeon HD 5770 1 GB GDDR5

  or ATI Radeon HD 5870 1GB GDDR5
  or nVidia GeForce GTS 240 1024Mo

  Well that's what I look at you and it comes in the budget... it will get the job done or loss of time and $? or am I missing something?

  I appreciate any input... I can usually make things look, but have little knowledge of the gear.

  Thank you

  John

  John, you can get drives of 1 to less than $100 from Newegg. Dell robs you blind on these things. That of why I specifically mentioned Newegg or similar. It will save a lot of money to take somewhere else and install it yourself.

• I need help with some Applescript for Postbox

  I was wondering if any of you can help me?

  I am writing a very simple script for my Postbox email application. It takes the selected message and turns it into a reminder. Everything works fine, but I want to take the subject assigned to the message and use it as the name of the callback list, and that's where it breaks down (topics are tags, as in Thunderbird and Mail).

  According to the dictionary, a message object counts among its subjects msg properties which is a list of subjects. According to the dictionary, a subject has three properties so, id, name , and color.

  I need only the first topic, so I do something like

  set theTopics to msg topics of theMessage.
  set theTopic to item 1 of theTopics

  no error reported, it returns a list, but when I then try to access the properties of the first article (= first subject), it is clear that something is wrong, and I think it's a bug/bad programming in the mailbox, but I'm not sure.

  When I do something like

  set ReminderList to name of theTopic

  He begins to complain. It is said that name (or id or color) is not available, as I can't get this to other classes, and it does not even return the class type for the element.

  It will return something that looks like this:

  class {show id "some topic"}

  no name for the class.

  And it seems that the text, but it behaves differently.

  How can I know what I'm actually deal with this object "topic"?

  What is - this actually to return?

  I don't know the app, but try to go back to theTopic properties.  That could make things a little clearer.