Need help choosing a netbook...

Similar Questions

• Need help choosing system with PP CS4

  I am looking to upgrade my system... and like most, I have limits on what I have available. My current system simply takes long and cannot handle HD playback. It would be great if someone could help me to choose, tell me if you work or just give up and deal with what I got up to a total redesign is possible.

  My software is PP cs4 and the projects that I will be working on will include capturing SD and HD, but mostly HD. I'll edit and export to tape SD DV and DVD a few projects will require export in HD. Why I will not go in, I'm going to need to go with a DELL system and can only scrape up to about $1,500.

  With that... So here's what I'm looking at:

  PROCESSORS

  Intel® Core™ i7 - 920 processor (8 MB L3 Cache, 2.66 GHz)

  Operating system

  Genuine Windows® 7 Home Premium, 64 bit, English

  MEMORY

  9 GB DDR3 SDRAM memory to 1 066 MHz - 6 DIMMs

  HARD DRIVE

  750 GB SATA 7200 RPM hard drive

  or opt for the 1 TB RAID 0 performance (2-500GB SATA)

  I also have a couple externa 1 GB hard drives

  VIDEO CARD

  ATI Radeon HD 5450 1 GB DDR3

  or go for ATi Radeon HD 5770 1 GB GDDR5

  or ATI Radeon HD 5870 1GB GDDR5
  or nVidia GeForce GTS 240 1024Mo

  Well that's what I look at you and it comes in the budget... it will get the job done or loss of time and $? or am I missing something?

  I appreciate any input... I can usually make things look, but have little knowledge of the gear.

  Thank you

  John

  John, you can get drives of 1 to less than $100 from Newegg. Dell robs you blind on these things. That of why I specifically mentioned Newegg or similar. It will save a lot of money to take somewhere else and install it yourself.

• need help choosing a graphics card

  Hi I have a pavilion A1240N hp

  Specifications of the PC: sound Windows 8

  with a processor dual core AMD Athlon 64 X 2 4200 +, 2000 Mhz, 2 logical processors

  I have upgraded to 4 GB of ram

  motherboard model: A8M2N - LA

  and all I want now is what can I do to go faster when it comes to playing games like minecraft, modern warfare.

  help a graphics card and if so what kind my motherboard supports?

  Hello

  Yes, for the games, a video REHELV is a must. Based on the following information, you can use a PCIe Express x 16 graphic card

  http://h10010.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&DLC=en&docName=c00714578

  You also need a better diet for a more powerful card. The following said nothing, not even of the same characteristics:

  http://h10025.www1.HP.com/ewfrf/wc/documentSubCategory?tmp_task=prodinfoCategory&cc=us&DLC=en&LC=en&product=1130587

  Kind regards.

• I need help, choose the right diet for my HP Pavilion a1000

  Hello

  I need to replace my power supply on my HP Pavilion a1000.  The vehicle currently has the original (A Bestec model: ATX-300-12Z COR.)  HP P/N is 5188-2625.

  I found one on ebay that has the same numbers, but instead of the CDR, he told RFI.  I don't really know what that means.  The list is below.  Will this work?  If this isn't the case, could you give me a link that would work?

  Thanks for your help!

  http://www.eBay.com/ITM/not-noisy-replacement-PC-power-supply-fo-Bestec-ATX-300-12Z-DDR-HP-P-N-5188-...

  jimmycaps wrote:

  Hello

  I need to replace my power supply on my HP Pavilion a1000.  The vehicle currently has the original (A Bestec model: ATX-300-12Z COR.)  HP P/N is 5188-2625.

  I found one on ebay that has the same numbers, but instead of the CDR, he told RFI.  I don't really know what that means.  The list is below.  Will this work?  If this isn't the case, could you give me a link that would work?

  Thanks for your help!

  http://www.eBay.com/ITM/not-noisy-replacement-PC-power-supply-fo-Bestec-ATX-300-12Z-DDR-HP-P-N-5188-2625-/390514394289?PT=PCA_UPS&hash=item5aec78c4b1

  Hello

  Yes, the power supply will be ok. It is a desktop computer, so you don't have to use exactly the same power supply. It can be even more powerful, but be sure there is all compatible connectors. It seems that the version of the CDR is only 300W and the DDR 400 w. The connectors are the same...

  http://www.newpowersupply.com/bestec_atx_300_12z_cdr_300w_300w_24_pin_ps2_replacement_power_supply_p_n5188_2625_bulk-PR-11.html

• Need help choosing correct High Gain Antennas

  Hi all

  I was wondering if someone could please offer me assistance in the choice of the correct high gain antennas for my Wireless Linksys WAP54G access point.  I recently ordered a set of Amazon, and even if the product description says that they would, they do not have.  The product said that it was a type of connection RP - TNC, but it wouldn't fit my WAP54G.  Could you get it someone please let me know what type of connector most recent WAP54G access point?  I really need to get some antennas ordered as soon as possible.

  Here is a link to the antennas I ordered on Amazon, which has not worked for me:

  http://www.Amazon.com/9dB-Linksys-15-booster-antenna/DP/B0009U736A/ref=cm_cr-Mr-title

  Although I wish I had the real Linksys brand antennas, they are much too expensive.  If you can point me in the right direction, or maybe even send me a link directly to the product page of what I need to order, which would be highly appreciated.

  Thanks for your help, and I wish everyone a great holiday of Thanksgiving.

  See you soon,.

  ~ Marty

  The antenna for the WAP54G and WRT54G the connector are of type RP - TNC

  Do you have any RP-TNC-M or RP-TNC-F

  The connector of the antenna on the WAP54G is M, so the antenna must be F

  Concerning

  Fred

• Need help choosing a new computer to run After Effects

  Hi all

  I waited to buy a desktop computer until I could set up something really good, but running After Effects on my laptop is not just cut it.  It slows down everything and when you try to use the feature plays only 6 frames per second. That being said, I need something that will give me better performance than my laptop but don't break the Bank.  (That way I can still move to a more desirable machine.)  I'm a noob when it comes to shopping for computers that go beyond the disk space and wifi, so I asked around, but honestly I'm more often conflicting opinions . I said the most important GPU, I said GPU is not serious at all.  It goes the same for the CPU.  I was also told that it's okay if I get something with integrated graphics on dedicated, etc.. This is where I hope you guys can help, since you actually understand the program I run.

  I would buy something already built, so I don't have to worry about what anyone screwing.  I've been thinking to get a desktop computer cheap off of ebay (as long as it will work better than my laptop) and then adding on it, but I don't know if it's the wiser decision.  All desktop computers can still be improved or they hit a point where they are worthless?

  Here are the specifications of my laptop:

  Windows 10 home

  Intel core i3 cpu M380 @ 2.53 GHZ

  4 GB of ram (3.80 GB usable)

  64 bit

  1 TB HARD disk drive

  Intel HD (internal) graphics with a total of 1696 MB graphic memory and 64 MB dedicated video memory

  
  

  Is there something out there that would be more fluid than my laptop, but for cheap AE?  Here are a few I've been Watch: Dell Optiplex 960 (3 GHz Quad Core Q9650 / 4 GB RAM / 160GB HDD)

  IBM Thinkcentre M58 PC Windows 7 Pro Desktop Core 2 Duo 3.0 GHz/8 GB / 250 GB HD with intergrated graphics

  A generation custom (with integrated graphics), including: Card mother Z87 - G41 / 8 GB RAM FURY HYPER / Gear solid 400w PSU / LG DVD PLAYER / INTEL PROCESSOR (3.2GHZ) G3258 / 240GB Sandisk Ultra II SSD / MSI cases

  
  

  And this one: AMD 4.2 Ghz Quad Core 8 GB RAM 1 TB Hdd/integre graphic.

  Thank you in advance for your help!

  
  

  
  

  
  

  For AE the only things that really affect performance are the cores, clock speed and memory.

  We must look at least an i7 quad core systems with hyper threading (6 or 8 core is much better, but more expensive) and at least 32 GB of memory. You must also at least two SSD, one for the OS, one media and projects. The video card is completely irrelevant for AE, any card $ 30 is sufficient.

  See Page Tweakers

• need help choosing a gpu for memphis-s MB

  Hello
  This card will fit EVGA GTX750Ti?

  Ty so mach

• New generation. Need help choosing a GPU

  New system is based on:

  I7 5960 x

  32 GB of ram

  SSD 240 GB for cache (AE and PremierePro)

  2 x 1 TR hard drives in RAID 0

  3 rpm hard drive for storage

  I am deciding what GPU to get. My budget is $ 400. GTX 970 seems a good choice, but I don't know if there is really no difference in performance between 970 and cheaper nVidia GPU, AE and creation are mostly powered CPU.

  It should be noted I'll buy the item 3D v2 for AE as well.

  Any advice would be much appreciated.

  AE is for most CPU power but first and SOUL use the GPU for many almost non-stop processes. The GPU has important implications for the first and SOUL. I suggest the 970GTX at this point, especially since it is in your budget.

  Eric

  ADK

• VPN requirements, need help in selecting the right technology

  I need help choosing correct vpn technology to meet my needs.

  I have a 2801 router I will use for vpn sessions. I use 871 routers of the series for remote clients. The requirements that make it difficult for me to determine how to configure are:

  The IP WAN routers 871 will be dynamic, so I can't use lan to lan standard IPSEC configuration. The solution must allow the connection of any address.

  Remote sites will also have to pass traffic between remote sites. I need to do this, because this VPN will be used for IP phones and I want clients on remote sites to be able to call each other.

  Some of the solutions I've seen require the remote user enter a user name and password of the CLI on their 871 to bring up the tunnel. If it's possible I don't want it's an addiction.

  I am familiar with cisco routers and can usually do a config works if provided an example, but I don't know enough about the various VPN options to choose the right solution. Any help is greatly appreciated.

  Thank you

  If you need a spoke-to-spoke vpn connection as well, you can try DMVPN.

  http://www.Cisco.com/en/us/products/ps6658/prod_presentation_list.html

• Need help on choosing 11.1.2.3.500 or 11.1.2.4 for Hyperion financial planning project

  Need help on choosing 11.1.2.3.500 or 11.1.2.4 for Hyperion planning project implementation.

  Currently, we are debating on the following points, so need for expert advice, if someone have already done this.

  • As all our previous implementation are on 11.1.2.3 500 and we know with certainty, it is stable
  • 11.1.2.4 is fairly new in the market

  That said y at - he already put 11.1.2.4 implemented for the PPP in particular, if yes how is the stability. As we have hard time have no place for the bugs that deals.

  Thanks in advance,

  Deker P.

  I don't think that 11.1.2.3.500 for planning is massively different the 11.1.2.4 so for stability, they should be similar, the improvements are mainly around the simplified interface.

  I would recommend going with 11.1.2.4, he is already on his third patch for the planning so I hope that all important questions will have been met, if there is a concern, then perhaps you should look at POC.

  See you soon

  John

• Hello, I need help.  in photoshop / editing / color / color / RGB management rules, it is impossible to change this point. Is in the "off" position and I would choose "preserve embedded profiles' I'm on windows 8 and creative cloud for photoshop.

  Hello, I need help. in photoshop / editing / color / color / RGB management rules, it is impossible to change this point. Is in the "off" position and I would choose "preserve embedded profiles' I'm on windows 8 and creative cloud for photoshop.

  Policies automatically goes to "off" If you have your screen as working RGB profile - what is something that you should never do. Always have a standard space like RGB work.

  And Yes, "preserve embedded profiles" is the only sensitive parameter. Others are best for special purposes where you really know what you are doing - at worst they will transform your archive in a unrecoverable mess.

  

• Need help to install iTunes v12.4.3.1 Windows 10

  I've tried everything to make it work:

  1. I tried to disable my antivirus before installing

  2. I tried to install as administrator

  3. I have tried to uninstall all relevant applications of apple.inc, restart my pc and then install again

  4. I tried to update my Windows

  I had iTunes installed before on my Pc with Windows 10, but two days ago, I restored my pc and now I can't install it.

  Please I need help

  

  The message "an error occurred during the installation of assembly ' Microsoft.VC80.CRT, type ="win32", version ="8.0.50727.6195", publicKeyToken ="1fc8b3b9a1e18e3b", processorArchitecture is...» "may occur because a particular library file is not included in the supplied with iTunes distribution package or will not be installed because some unspecified reason. Install Microsoft Visual C++ 2005 Service Pack 1 Redistributable Package MFC security update before you attempt to reinstall iTunes can help.

  There are three files to choose from if you need choose the one that matches the processor architecture of your system, which must be indicated in the error message.

  • Vcredist_x86. EXE - 32 bit systems
  • vcredist_IA64. EXE - Itanium processors
  • VCRedist_x64. EXE - other 64-bit systems

  When to reinstall iTunes, right-click on the Setup and run as administrator.

  See troubleshoot problems with iTunes for Windows updates for more information if necessary.

  TT2

• Need help! SR1830NX

  I recently bought a new video card, e-GeForce 8800 GT from NVidia (EVGA) and he said that must be a minimum of power supply 400 watt with 26 amps on the rail + 12 v and an additional PCIe power connector (or two connectors of HDD).  My current diet is only 300, so I know that it won't work, but I just need help to choose a new power supply.  I did a little research and it seems that http://www.bestbuy.com/site/olspage.jsp?skuId=8545158 & type = product & id = 1188560188623 this product will work, it's high notes and all, but I wonder if it will work even with my computer.  Once again, I have a Compaq Presario SR1830NX and am just wanting to upgrade to a better diet.  Will be the one that I chose work w / my motherboard?  Thanks for any help!

  http://www.Newegg.com/product/product.aspx?item=N82E16817371006 I think it's the only one that I will eventually buy.  = D a person left a comment indicating that the + 12V "double rail" was in fact a single rail 30 a, and it is 430 watts, so I think it should work without a doubt!  = D thank you very much for your help!

• Need help updating Bios dc7800 Compact Mini Tower: ROM CAB missing or damaged

  I need help, updated the BIOS on my HP dc7800 CMT. I get this error message:

  System BIOS updte file (. C:\Users\f\Downloads\ROM CAB) is missing or damaged. THE system BIOS does not update.

  I tried to update using the sp53611.exe (8.0 MB) 1.32 Rev A(6 Dec 2011) HP Compaq Business Desktop system BIOS (BIOS 786F1)

  Which can be found here.

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=3459243 & swItemId = vc_97114_1 & swEnvOid = 4059

  The current version of my BIOS is: 786F1 v01.04 2007-07-18

  I am running Windows 7 64-bit Ultiate. I noticed on the page (linked above) software, it mentions most of the flavors of Windows 7 64-bit, but it does not mention Win 7 ULTIMATE 64-ditch.

  Here's what I did:

  (1) computer restarted in safe mode

  (2) connected as administrator

  (3) Task Manager began to ensure that all applications and most of the services have been arrested

  3 (a) as an additional precaustion, I even stopped Windows Defeneder

  (4) double clicked on sp53611.exe and let it install the software.

  (5) This opens a web page. I clicked on the link which was under the Bio update to a windows environment.

  (6) the process has started, but then I got the above error.

  Any ideas on what to do next?

  Is it possible that the BIOS cannot be updated because the software does not support windows 7 64 bit ULTIMATE?

  Thank you in advance. I have a new graphics card today (Radeon HD 6570 - who has been recommended by Mr. Paul Tikkanen, thank you), and I guess I should have my current BIOS a bit, no?

  Hello:

  There should be no need to update the BIOS, if everything is working properly.

  If you want to update the BIOS, you must use the built in Flash ROM of system menu in the BIOS.

  It is the safest and easiest way to Flash the BIOS.

  All you need is a USB stick formatted with the FAT 32 file system.

  Download the latest BIOS update, then run it.

  You should get a page of instructions.  On this page, you want the option F10 system flash rom and you should see a summary of BACK flash folder view.

  Copy all the files in this folder on your USB.

  Plug the drive into the usb port, restart the PC and at the beginning of the HP welcome screen, press the F10 key to access the BIOS.

  There will be a menu to System Flash ROM

  What to choose and it should see the BIOS update files on the usb flash drive.  Then follow the instructions on the screen to proceed to the update of the BIOS.

• Satellite C660D - 18 c - need help with recovery

  Hello

  I need help for my computer. My calculation is not started and shows "bootmrg is missing. I'm putting in recovery CD (i downloaded from Internet) when the CD starts, I get choose it to select the operating system, but it isn't here, what should I do?

  You can't expect that we comment on a few non-originales recovery image download from the internet.

  Recovery image is on a language only if you can't choose another language. Recovery images vary between countries, so if you have a recovery for UK image you must install the default language (English).

  What language is this recovery image?