Need help - Cisco ASA with the power of fire

Hello

Currently, we use asa 5510 without function of firepower. Our goal is to publish web servers and microsoft lync with reverse proxy method. control internet traffic, apply extensions individual file not to download, management of bandwidth etc.

Is it possible if we add firepower on asa 5510... Please guide me... Thank you

Power of fire must be installed on the new series X of the SAA.  5512 x, x 5515, 5525 x, etc.

If you have a 5510, you probably want a 5512 x with an SSD.  Cisco has beams of firepower include the ASAx with SSD and the license of firepower.

Adds that you must also Firesight management software, and there is a license bundle of 2 camera for under $ 500 that you can install on VMWare.

Firepower is not reverse proxy, it's transparent online packages, analysis and filtering by URL / Application / and threat mitigation.

If you want a reverse proxy, you should look into Microsoft ISA server or a Proxy Server reverse dedicated Web.  Cisco gave its product Web Director, who has done this function.

You can host Web sites behind a firewall of ASA without proxy reverse.  And the ASA has an inspection of the request for HTTP traffic, responsible for watching HTTP requests.  The firepower to the ASA system also has specific signatures that monitor traffic to the web servers and prevent specific vulnerabilities that are known on those servers, so if that is what you want the Reverse Proxy for, then the power of fire module would probably cover your needs.

Don't forget that until the next quarter firepower system has no decryption on the box, and you might want to wait that the feature is released and put in place, so that you know what size firewall you need protect your network with the SSL decryption.  I believe that the ASA5512x is testing at 75 Mbps stream decrypted via the fire power module, which is about half of what was before CX, then you could use the sizing numbers CX and extrapolate until Cisco releases official decryption numbers.

Tags: Cisco Security

Similar Questions

  • Cisco ASA with the power of fire vs Cisco IPS Appliance

    Hello

    Question: is there the functional differences between an ASA with the feature of firepower enabled and power of fire IPS appliances 'pure' (e.g. 7000 and 8000 series IPS Modules)?

    Thank you very much!

    Kind regards

    David

    Hello team,

    The same features except hardware bypass and another should trhougputs. Of course the flow rate will be high for hardwrae devices and it also has the ability to bypass equipment. Apart from that URL and all other filtering the same characteristics.

    Rate of good will if this post helps you.

    Concerning
    Jetsy

  • ASA with the power of fire, no need for the license of botnet?

    1. We are looking to upgrade our ASA of legacy IDS/IPS in firepower (to buy SSDS), we use the botnet license, go to firepower would make redundant botnet as sourcefire/firepower does the same job?
    2. We are looking to buy 2 new 5516 for a site with the power of fire, so I need to know to add the botnet on the agenda.     Cheers - more to see: https://supportforums.cisco.com/discussion/12527741/asa-firepower-any-ne...

    See you soon

    1. We are looking to upgrade our ASA of legacy IDS/IPS in firepower (to buy SSDS), we use the botnet license, go to firepower would make redundant botnet as sourcefire/firepower does the same job?
    2. We are looking to buy 2 new 5516 for a site with the power of fire, so I need to know to add the botnet on the agenda.

    See you soon

    -See more at: https://supportforums.cisco.com/discussion/12527741/asa-firepower-any-ne...

    1. We are looking to upgrade our ASA of legacy IDS/IPS in firepower (to buy SSDS), we use the botnet license, go to firepower would make redundant botnet as sourcefire/firepower does the same job?
    2. We are looking to buy 2 new 5516 for a site with the power of fire, so I need to know to add the botnet on the agenda.

    See you soon

    -See more at: https://supportforums.cisco.com/discussion/12527741/asa-firepower-any-ne...

    1. We are looking to upgrade our ASA of legacy IDS/IPS in firepower (to buy SSDS), we use the botnet license, go to firepower would make redundant botnet as sourcefire/firepower does the same job?
    2. We are looking to buy 2 new 5516 for a site with the power of fire, so I need to know to add the botnet on the agenda.

    See you soon

    -See more at: https://supportforums.cisco.com/discussion/12527741/asa-firepower-any-ne...

    Double - answered in the other display.

  • Protect and control the license for ASA with the power of fire

    I had 1 ASA 5515 initially delivered with the software cx, then made room for the software of firepower and got the virtual firesight for 2 devices and license of TAMAS tha L-5515, but this license was told only the URLs and malware license, I thought that this license was for all that since he has no other licenses in the data sheet and it's Reference with more features.

    How can I get the license protect and control now so I can add the asa with the firepower to firesight and apply to all licenses

    Thank you

    Hello

    L ASA5515-TAMAS = SKU license plans to "MALWARE" and "URLFilter" and legally gives the user to updates of the signature "PROTECT + CONTROL". It does not license "PROTECT + CONTROL". You need to buy "ASA5515-CTRL-LIC =" to license "PROTECT + CONTROL".

    Please discuss a case with CISCO GLO, they can help provide a CTRL license

    -DD

  • LT2P configuration vpn cisco asa with the internet machine windows/mac issue

    Dear all,

    I have properly configured configuration vpn L2TP on asa 5510 with 8.0 (4) version of IOS.

    My internet does not work when I connect using the vpn. Even if I give power of attorney or dns or I remove the proxy

    It does not work. only the resources behind the firewall, I can access. I use the extended access list

    I tried also with the standard access list.

    Please please suggest what error might be.

    Thank you

    JV

    Split for L2TP over IPSec tunnel tunnel is not configured on the head end (ASA), it must be configured on the client itself, in accordance with the following Microsoft article:

    http://TechNet.Microsoft.com/en-us/library/bb878117.aspx

  • Need help on PSP with the JDE ERP integration

    Hello

    We need to implement accounting processes with JDE using FIP Solution accelerator providers.

    It seems that Oracle does not provide this integration, please someone implemented, can provide some details will be highly appreciated.

    You can go forward with the consultation.

    But if you look at the base or FIPSA solution accelerator, these are all business processes that can be built easily internal either using BPMN or BPEL.

    I have provided details taking point of FIPSA for EBS you mentioned that oracle provide for that.

    Leave that all behind, go build your own set of BPEL/BPMN process to expedite the process of AP/expense in your organization.

    Even the adapter for JDE development is very simple as it seems.

    If you decide to go forward in the internal system I can help you in all aspects or ODC/RPO/IPM/UCM/BPMN/BPEL/JDE/EBS/TFTP.

  • Need help get data with the most recent date of entry into

    Hey guys;

    I need help with fine tuning a query to get the one with the most recent implementation.

    Here's my current query:

    /**********************************************
    Select sge.seal_group_id,
    SGE.equipment_id,
    SGE.effective_date
    of seal_group_equipment EMS.
    seal_group sg
    where equipment_id = 48801
    AND EMS. SEAL_GROUP_ID = SG. SEAL_GROUP_ID
    and sge.end_date is null
    Group of sge.equipment_id, sge.seal_group_id, sge.effective_date
    After having sge.effective_date = max (sge.effective_date)

    ******************************************************/

    Which produces the following results:
    SEAL_GROUP_ID - EQUIPMENT_ID - EFFECTIVE_DATE
    25-48801 - 01/01/1993-00: 00:00
    11730-48801 - 22/08/2003 08:42:11


    What I really need, is to show only the line with the most recent date of entry into
    I hope someone can help
    Thank you

    MAX will not work because the SEAL_GROUP_ID could depart. I would say analytical:

    select seal_group_id,
    equipment_id,
    effective_date
    from (
    select sge.seal_group_id,
    sge.equipment_id,
    sge.effective_date,
    RANK() over (partition by equipment_id order by effective_date desc) r
    from seal_group_equipment sge,
    seal_group sg
    where equipment_id = 48801
    AND SGE.SEAL_GROUP_ID = SG.SEAL_GROUP_ID
    and sge.end_date is null)
    where r = 1;
    

    Keep in mind if two records have the same effective_date, they would both appear.

    Note: query above has not been tested, since there is no script provided.

  • Fire power User Agent is unable to connect with the power of fire management center

    Hi Cisco supports,

    I have problem with firepower User Agent, when I want to add a power of fire management center agent, then I get the error "cannot connect to the management center of firepower." You can find the error in the attachment! I have already added the User Agent in the CMF.

    My Version of power of fire management centre is 6.0.0.1

    and my 2.3 10 User Agent

    Hello

    You don't need to open it manually. If you have added the CMF officer, then it should be opened by default. What I wanted was to ensure that there is no intermediate firewall between the agent and the CMF.

    You can capture packets on FMC cli and check if traffic reaches here.

    > tcpdump-i eth0 port 3306

  • need help musicmatch runnig off the power of a computer laptop windows 7 - px.dll is missing

    Hello as my question States I'm currently running musicmatch 10 or earlier out of my 2011 new hp but I cant it says px.dlll missing is not that I have a problem to update to new software is just that and earleir versions of musicmatch were very easy to use and nothing like * i tunes what I mean , it's all artist were aligned there is no secondary funds or search if I wanted a song by an artist I just clicked her naem and songs would be listed, I find no other program like him and juice I want to run musicmatch out of me, it's a 64-bit version

    Cannot run Musicmatch 9.0 on Windows 7, error: PX file missing. DLL
    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_programs/unable-to-run-MusicMatch-90-on-Windows-7-error/d0d0197f-D964-E011-8dfc-68b599b31bf5

    http://answers.Microsoft.com/en-us/search/search?searchterm=MusicMatch&CurrentScope.ForumName=Windows&CurrentScope.filter=Windows_7-windows_programs&askingquestion=false

    Make older programs in this version of Windows (Windows 7)
    http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

    Help with Windows 7 compatibility issues
    http://Windows.Microsoft.com/en-us/Windows7/help/compatibility

    Windows 7 Compatibility Center
    http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

    Have you tried right clicking on the shortcut to the program or the .exe and select "Run As Administrator"?  Perform, even if your user name is an administrator.

    Try right click on the actual Setup.exe and choosing the option "Run As Administrator"?  Perform, even if your user name is an administrator.

    A Virtual Machine option may be possible.

    Windows Virtual PC
    Download Windows XP Mode
    http://www.Microsoft.com/Windows/Virtual-PC/Download.aspx

    Windows XP Mode (Windows 7 only, but not one of the Home versions) "you are not eligible to download Windows XP Mode. You must have Windows 7 Professional, enterprise or full to run Windows XP Mode."    If you have an old XP CD (or other older Windows CD) available you can simply download the Virtual Machine and spend the XP Mode download.

    This warranty covers the gambit set of VMS in the 'Home' versions if you want to have a look.  Of course you will need a licensed copy of XP to install and run in any of them (except XP Mode).

    VirtualBox is an impressive VM competitor
    http://WindowsSecrets.com/search/?CX=017937947691920082874%3A_ilcm6kdy_y&COF=FORID%3A11&q=VirtualBox+is+an+impressive+VM+contender+&SA=search&advWS=1&advSAN=1&advPages=15

  • Need help query view with the 'Level' column name

    Hello world

    I use Oracle DB 10 g

    I have this request
    SELECT  count(per_id) 
    FROM    XXITS_EMP_MSTR_V
    WHERE   per_id = 213214 
    AND     Level='Technical Staff / Officer'
    XXITS_EMP_MSTR_V is a view created by someone else.

    I get the error "ORA-01788: CONNECT BY clause in this query block" for the the above statement.
    Is it possible that I can always get the result without changing the view?

    Any help is appreciated...

    Thank you
    Elmer

    Elmer says:
    Hello world

    I use Oracle DB 10 g

    I have this request

    SELECT  count(per_id)
    FROM    XXITS_EMP_MSTR_V
    WHERE   per_id = 213214
    AND     Level='Technical Staff / Officer'
    

    Place the level with quotes

    AND "Level" = 'Technical Staff / Officer'
    

    Make sure that the case is used correctly when using double quotes.

  • Need help: error communicating with the server on boot up

    Anyone an idea what server it could be? I received this alert after starting my Mac Pro (OSX 10.7.5):

    He didn't identify which server, what app or anything like that. I wonder if I should do a virus check. If someone things

    can a good idea, it's been so long I've owned a virus app, anyone recommend some?

    Thank you

    Steven

    I don't know a good way to identify which application raised the dialog box, except via the menu bar.   If you have selected the dialog box, see if the name of the associated application is upwards in the menu bar.

    Otherwise...   What elements of openness are present?   System Preferences > users and groups > login items.    Except maybe iTunesHelper, hover over the name of the application to get the path to the application, and then delete the entries you do not use or don't recognize, please disconnect and reconnect and see if the prompt disappears.

    Otherwise, open Console.app from Applications > utilities and see if you can find a server connection error connected there.   There will be a lot of messages he and some will be pretty obscure or maybe even bad omen, and the deluge of text can be quite normal.   You are specifically looking for an error in Server connection with a timestamp at the time dialog box appears.

    If you can not solve this problem from the steps above, then download and run Etrecheckand post the diagnosis report here and maybe someone can spot a package that raises this dialog box.

    OS X 10.7.5 is quite far back that there may be problems to establish a secure connection, but it's a full proposal.  If your Mac allows, consider an upgrade to a newer version of Mac OS X.

    Antivirus and Anti-malware packages have a long and sordid and increasingly questionable history and its effectiveness lately - by the industry itself - was rather less than 50% (and I suppose, fall), and the software has caused more than a few problems with stability and reliability.   Most people with OS X get put into bags by installing malicious software themselves, or through the so-called phishing; try to get the user to install the malware, or open access to the system to allow the attacker to connect and install malicious software.

    Keep all Gatekeeper to allow only to App Store and identified the developers (System Preferences > Security and confidentiality), configure, and maintain Time Machine or another backup running tool and do not install anything you didn't pick.   I would probably also either disable or remove Microsoft Silverlight, Adobe Flash and Java from Oracle, or at least keep them current and get a blocker plugin, because these are some of the most common paths to the Junk onto a system, if it is not directly installed by the user.

  • Traffic that overlap on the device with the power of fire

    Hello world

    How should I handle the traffic that overlap on the device of firepower?

    I am inspection 2 VLANS using switches virtual, one VLAN is my edge of the internet and the other VLAN is my internal servers VLAN.

    Sometimes my internal servers to THAT VLAN needs access to internet and that traffic is superimposed on the inspection of my internet edge VLAN.

    Is there a configuration to avoid connections between connected/inspected twice?

    Thank you

    Hello

    You can create rule of the trust with areas / vlan specific or IP source/destination if you want a specific traffic does not inspect.

  • HP KP721AV: Need help, computer father has the blue screen "enter power - on password.

    I need help.  Electricity blimped last night at my father, leaving the computer does not off properly.  We have tried to unplug the unit from the wall to reset, but again it still leaves us with the "power - on Password enter" can anyone help?  Thanks in advance

    Hello:

    Please see the below troubleshooting guide, annex B, page 62.

    http://h20566.www2.HP.com/hpsc/doc/public/display?sp4ts.Oid=3785403&docid=emr_na-c01516072&docLocale=en_US

  • When the Admin sign on the office comes to the top, but after that the computer does not respond when the user tries to do anything. There are actually turns off the computer with the power button.

    Original title: user profile

    My administrator user profile does not work properly, but I have a user profile that has activated the parental control that worked well for about a year and yesterday when this user logs on the desktop comes up, but after that the computer does not respond when that user tries to do anything. There are actually turns off the computer with the power button.  I ran a virus scan and spyware scan in my user admin profile and he has not found anything.  I don't know what to check.

    Hello rhunter15,

    There may be a program to interfere with Parental controls so that we can try a few things to see if we can determine the application or program that is causing problems.

    First of all, we run System File Checker to see if you have a corrupt file system.

    • Click Start
    • Click on all programs
    • Click Accessories, and then right-click on the command prompt.
    • Select the Security tab and choose "Run as Administrator"
    • Click on command prompt
    • Type SFC/scannow.

    It will scan and repair any damaged operating system files.

    To determine if there is a program because of a conflict, we recommend that you perform a "clean boot" of the computer. A clean boot is designed to disable programs and services in the background as much as possible. This helps determine which service or program can be the cause of the problem.  For more information about how to perform a clean boot for troubleshooting, click the number below to view the article in the Microsoft Knowledge Base.

    KB 929135 - how to solve a problem of performaing a clean boot in Windows Vista.
    http://support.Microsoft.com/kb/929135

    Once you have finished the clean boot, check again and see if you get the error of parental control.

    If please post again and let us know if that helped pinpoint the problem or if you still need help.

    Thank you

    Marilyn
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • My original XP Pro disc is SP2. I've updated to SP3 and now I have corrupted files and need to repair windows with the disc.

    My original XP Pro disc is SP2. I've updated to SP3 and now I have corrupted files and need to repair windows with the disc. When I put disc SP2 in it tells me that it is a work old version and custom. How to make a disc with SP3 top to repair my OS?

    Hi DFPI.

    I suggest you to uninstall Service Pack 3 temporarily on your computer.

    How to remove Windows XP Service Pack 3 from your computer

    Later, try to repair the computer with the Windows XP disc and check if it works.

    Later, reinstall the Service Pack 3 after the computer repair.

    Reference: Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

    Hope the helps of information.

    Please post back and we do know.

Maybe you are looking for